Formative and reflective measurement and validation mismatch in survey research : an archival analysis of information systems success constructs 1985-2007

The generic IS-success constructs first identified by DeLone and McLean (1992) continue to be widely employed in research. Yet, recent work by Petter et al (2007) has cast doubt on the validity of many mainstream constructs employed in IS research over the past 3 decades; critiquing the almost universal conceptualization and validation of these constructs as reflective when in many studies the measures appear to have been implicitly operationalized as formative. Cited examples of proper specification of the Delone and McLean constructs are few, particularly in light of their extensive employment in IS research. This paper introduces a four-stage formative construct development framework: Conceive > Operationalize > Respond > Validate (CORV). Employing the CORV framework in an archival analysis of research published in top outlets 1985-2007, the paper explores the extent of possible problems with past IS research due to potential misspecification of the four application-related success dimensions: Individual-Impact, Organizational-Impact, System-Quality and Information-Quality. Results suggest major concerns where there is a mismatch of the Respond and Validate stages. A general dearth of attention to the Operationalize and Respond stages in methodological writings is also observed.

Environmental and public health issues in Mount Isa : 2007 community survey

This report presents the results of a random telephone survey of 500 adult residents of Mount Isa, conducted in early November 2007. The study was funded by Xstrata Mount Isa Mines. The primary aim of the survey was to collect data about community perceptions and experiences of air quality in Mount Isa and to compare these results with those of a similar survey conducted in 2000 (MacLennan, Lloyd & Hensley, 2000). Both surveys also included questions relating to other aspects of the Mount Isa environment (e.g. water quality, heat, amount of greenery) as well as questions aimed at ascertaining respondents’ general attitudes towards environmental protection.

Biomechanical force displacement analysis of strength of fixation of tracker holding devices to bone in computer aided joint replacement

Computer aided joint replacement surgery has become very popular during recent years and is being done in increasing numbers all over the world. The accuracy of the system depends to a major extent, on accurate registration and immobility of the tracker attachment devices to the bone. This study was designed to asses the forces needed to displace the tracker attachment devices in the bone simulators. Bone simulators were used to maintain the uniformity of the bone structure during the study. The fixation devices tested were 3mm diameter self drilling, self tapping threaded pin, 4mm diameter self tapping cortical threaded pin, 5mm diameter self tapping cancellous threaded pin and a triplanar fixation device ‘ortholock’ used with three 3mm pins. All the devices were tested for pull out, translational and rotational forces in unicortical and bicortical fixation modes. Also tested was the normal bang strength and forces generated by leaning on the devices. The forces required to produce translation increased with the increasing diameter of the pins. These were 105N, 185N, and 225N for the unicortical fixations and 130N, 200N, 225N for the bicortical fixations for 3mm, 4mm and 5mm diameter pins respectively. The forces required to pull out the pins were 1475N, 1650N, 2050N for the unicortical, 1020N, 3044N and 3042N for the bicortical fixated 3mm, 4mm and 5mm diameter pins. The ortholock translational and pull out strength was tested to 900N and 920N respectively and still it did not fail. Rotatory forces required to displace the tracker on pins was to the magnitude of 30N before failure. The ortholock device had rotational forces applied up to 135N and still did not fail. The manual leaning forces and the sudden bang forces generated were of the magnitude of 210N and 150N respectively. The strength of the fixation pins increases with increasing diameter from three to five mm for the translational forces. There is no significant difference in pull out forces of four mm and five mm diameter pins though it is more that the three mm diameter pins. This is because of the failure of material at that stage rather than the fixation device. The rotatory forces required to displace the tracker are very small and much less that that can be produced by the surgeon or assistants in single pins. Although the ortholock device was tested to 135N in rotation without failing, one has to be very careful not to put any forces during the operation on the tracker devices to ensure the accuracy of the procedure.

Public awareness of ‘green’ residential property – an empirical survey based on data from New Zealand and Germany

Over the last few years more stringent environmental laws (e.g. the German “Energie¬ein-sparverordnung ENEV” - Energy Performance of Buildings Directive) and soaring energy prices has increased the need for the real estate industry to react and participate in overall energy reduction through efficient house construction and design, as well as upgrading the existing housing stock to be more energy efficient. Therefore the Property Economics Group at Queensland University of Technology in Australia and Nuertingen-Geislingen University in Germany are carrying out research in relation to sustainable housing construction and public awareness of “green” residential property. Part of this research is to gain an understanding of the level of knowledge and importance of these issues to the house buyer and to determine the importance of sustainable housing to the general public. The paper compares data from two different empirical studies; one of studies analyzes the situation in New Zealand, the other is focused on Germany.

Current rural valuation practice : a survey of valuers and agribusiness managers on farm management and sustainable rural land use

Over the past 20 years the nature of rural valuation practice has required most rural valuers to undertake studies in both agriculture (farm management) and valuation, especially if carrying out valuation work for financial institutions. The additional farm financial and management information obtained by rural valuers exceeds that level of information required to value commercial, retail and industrial by the capitalisation of net rent/profit valuation method and is very similar to the level of information required for the valuation of commercial and retail property by the Discounted Cash Flow valuation method. On this basis the valuers specialising in rural valuation practice have the necessary skills and information to value rural properties by an income valuation method, which can focus on the long term environmental and economic sustainability of the property being valued. This paper will review the results of an extensive survey carried out by rural property valuers in Australia, in relation to the impact of farm management on rural property values and sustainable rural land use. A particular focus of the research relates to the increased awareness of the problems of rural land degradation in Australia and the subsequent impact such problems have on the productivity of rural land. These problems of sustainable land use have resulted in the need to develop an approach to rural valuation practice that allows the valuer to factor the past management practices on the subject rural property into the actual valuation figure. An analysis of the past farm management and the inclusion of this data into the valuation methodology provides a much more reliable indication of farm sustainable economic value than the existing direct comparison valuation methodology.

Current rural valuation practice : a survey of NSW valuers and agribusiness managers

Despite the advances that have been made in relation to the valuation of Commercial, Industrial and retail property, there has not been the same progress in relation to the valuation of rural property. Although number of rural property valuations also require the valuer to carry out a full analysis of the economic performance of the farming operations, as well as the long term environmental viability of the farm, this information is rarely used to assess the value of the property, nor is it even used for a secondary valuation method. Over the past 20 years the nature of rural valuation practice has required most rural valuers to undertake studies in both agriculture (farm management) and valuation, especially if carrying out valuation work for financial institutions. The additional farm financial and management information obtained by rural valuers exceeds that level of information required to value commercial, retail and industrial by the capitalisation of net rent/profit valuation method and is very similar to the level of information required for the valuation of commercial and retail property by the Discounted Cash Flow valuation method. On this basis the valuers specialising in rural valuation practice have the necessary skills and information to value rural properties by an income valuation method. Although the direct comparison method of valuation has been sufficient in the past to value rural properties the future use of the method as the main valuation method is limited and valuers need to adopt an income valuation method as at least a secondary valuation method to overcome the problems associated with the use of direct comparison as the only rural property valuation method, especially in view of the impact that farm technical, financial and environmental .management can have on rural property values. This paper will review the results of an extensive survey carried out by rural property valuers and agribusiness managers in NSW, in relation to the impact of farm management on rural property values and rural property valuation practice.

Construction virtual prototyping : a survey of use

Purpose –The introduction of Building Information Model tools over the last 20 years is resulting in radical changes in the Architectural, Engineering and Construction industry. One of these changes concerns the use of Virtual Prototyping - an advanced technology integrating BIM with realistic graphical simulations. Construction Virtual Prototyping (CVP) has now been developed and implemented on ten real construction projects in Hong Kong in the past three years. This paper reports on a survey aimed at establishing the effects of adopting this new technology and obtaining recommendations for future development. Design/methodology/approach – A questionnaire survey was conducted in 2007 of 28 key participants involved in four major Hong Kong construction projects – these projects being chosen because the CVP approach was used in more than one stage in each project. In addition, several interviews were conducted with the project manager, planning manager and project engineer of an individual project. Findings –All the respondents and interviewees gave a positive response to the CVP approach, with the most useful software functions considered to be those relating to visualisation and communication. The CVP approach was thought to improve the collaboration efficiency of the main contractor and sub-contractors by approximately 30 percent, and with a concomitant 30 to 50 percent reduction in meeting time. The most important benefits of CPV in the construction planning stage are the improved accuracy of process planning and shorter planning times, while improved fieldwork instruction and reducing rework occur in the construction implementation stage. Although project teams are hesitant to attribute the use of CVP directly to any specific time savings, it was also acknowledged that the workload of project planners is decreased. Suggestions for further development of the approach include incorporation of automatic scheduling and advanced assembly study. Originality/value –Whilst the research, development and implementation of CVP is relatively new in the construction industry, it is clear from the applications and feedback to date that the approach provides considerable added value to the organisation and management of construction projects.

(-)-CGP12177 increases contractile force through beta1l-adrenoceptors but not through beta3-adrenoceptors in human right atrial myocardium

(-)-CGP12177 is a non-conventional partial agonist that causes modest and transient increases of contractile force in human atrial trabeculae (Kaumann and Molenaar, 2008). These effects are markedly increased and maintained by inhibition of phosphodiesterase PDE3. As verified with recombinant receptors, the cardiostimulant effect of (-)-CGP12177 is mediated through a site at the beta1-adrenoceptor with lower affinity (beta1LAR) compared to the site through which (-)-CGP12177 antagonizes the effects of catecholamines (beta1HAR). However, in a recent report it was proposed that the positive inotropic effects of CGP12177 are mediated through beta3-adrenoceptors (Skeberdis et al 2008). We therefore investigated whether the effects of (-)-CGP12177 on human atrial trabeculae are antagonized by the beta3-adrenoceptor-selective antagonist L-748,337 (1 microM). (-)-CGP12177 (200 nM) caused a stable increase in force which was significantly reduced by the addition of (-)-bupranolol (1 microM), P = 0.002, (basal 4.45 ± 0.78 mN, IBMX (PDE inhibitor) 5.47 ± 1.01 mN, (-)-CGP12177 9.34 ± 1.33 mN, (-)-bupranolol 5.79 ± 1.08 mN, n = 6) but not affected by the addition of L-748,337 (1 microM), P = 0.12, (basal 4.48 ± 1.32 mN, IBMX 7.15 ± 2.28 mN, (-)-CGP12177 12.51 ± 3.71 mN, L-748,337 10.90 ± 3.49 mN, n = 6). Cumulative concentration-effect curves for (-)-CGP12177 were not shifted to the right by L-748,337 (1 microM). The –logEC50M values of (-)-CGP12177 in the absence and presence of L-748,337 were 7.21±0.09 and 7.41±0.13, respectively (data from 25 trabeculae from 8 patients, P=0.2) The positive inotropic effects of (-)-CGP12177 (IBMX present) were not antagonized by L-748,337 but were blunted by (-)-bupranolol (1 microM). The results rule out an involvement of beta3-adrenoceptors in the positive inotropic effects (-)-CGP12177 in human right atrial myocardium and are consistent with mediation through beta1LAR. Kaumann A and Molenaar P (2008) Pharmacol Ther 118, 303-336 Skeberdis VA et al (2008) J Clin Invest, 118, 3219-3227

The roles and importance of formal and informal sources of business support in young firms : evidence from the UK’s 2008 Federation of Small Business Survey

Objectives This research explores the relationship between young firms, their growth orientation-intention and a range of relationships which can be seen to provide business support. Prior-work Research indicates that networks impact the firm’s ability to secure resources (Sirmon and Hitt 2003; Liao and Welsch. 2004; Hanlon and Saunders 2007). Networks have been evaluated in a number of ways ranging from simple counts to characteristics of their composition (Davidsson and Honig 2003), strength of relationships (Granovetter 1973) and network diversity (Carter et al 2003). By providing access to resources and knowledge (from start-up assistance and raising capital, (e.g. Smallbone et al, 2003), networks may assist in enabling continued persistence during those times where firms may experience resource constraints owing to firm growth (Baker and Nelson 2005). Approach The data used in this research was generated in the 2008 UK Federation of Small Businesses (FSB) survey. Over 1,000 of the firms responding were found to fall into the category of “young”, ((defined as firms under 4 years old). Firms were considered the unit of analysis with the entrepreneur being the chief spokesperson for the firm. Preliminary data analysis considered key demographic characteristics and industry classifications, comparing the FSB data with that of the UK government’s own (BERR) Small Business Surveys of 2007 and 2008, to establish some degree of representativeness of the respondents. The analysis then examined networks with varying potential ability to provide support for young firms, the networks measured in terms of number, diversity, characteristic and strength in its relationship to young firm growth orientation. The diversity of business-support-related relationships ranged from friends and family, through professional services, customers and suppliers, and government business services, to trade associations and informal business networks. The characteristics of these formal and informal sources of support for new businesses are examined across a range of business support-type activities for new firms. The number of relationships and types of business support are also explored. Finally, the strength of these relationships is examined by analysis of the source of business support, type of business support, and links to the growth orientation-intention of the firm, after controlling for a number of key variables related to firm and industry status and owner characteristics. Results Preliminary analysis of the data by means of univariate analysis showed that average number of sources of advice was around 2.5 (from a potential total of 6). In terms of the diversity of relationships, universities had by far the smallest percentage of firms receiving beneficial advice from them. Government business services were beneficially used by 40% of young firms, the other relationship types being around the 50-55% mark. In terms of characteristics of the advice, the average number of areas in which benefit was achieved was around 5.5 of a maximum of 15. Start-up advice has by far the highest percentage of firms obtaining beneficial advice, with increasing sales, improving contacts and improving confidence being the other categories at or around the 50% mark. Other market-focused areas where benefits were also received were in the areas of new markets, existing product improvements and new product improvements, where around 40% of the young responding firms obtained benefit. Regression techniques evaluating the strength of these relationships in terms of the links between business support (by source of support, type of support, and range of support) and firm growth orientation-intention focus highlighted a number of significant relationships, even after controlling for a range of other explanatory variables identified in the literature. Specifically, there was found to be a positive relationship between receiving business advice generally (regardless of type or source) and growth orientation. This relationship was seen to be stronger, however, when looking at the number of types of beneficial advice received, and stronger again for the number of sources of this advice. In terms of individual sources of advice, customers and suppliers had the strongest relationship with growth, with Government business services also found to be significant. Combining these two sources was also seen to increase the strength of the relationship between these two sources of advice and growth orientation. In considering areas of support, growth was most strongly positively related to advice that benefited the development of new products and services, and also business confidence, but was negatively related to advice linked to business recovery. Finally, amalgamating the 4 key types and sources of advice to examine the impact of combinations of these types and sources of advice also improved the strength of the relationship. Implications The findings will assist in the understanding of young firms in general and growth more specifically, particularly the role and importance of specific sources, types and combinations of business support used more extensively by new young growth-oriented firms. Value This research may assist in processes designed to allow entrepreneurs to make better decisions; educators and support organizations to develop better advice and assistance, and Governments design better conditions for the creation of new growth-oriented businesses.

Measurement properties of the Australian Women's Activity Survey

Purpose: The Australian Women’s Activity Survey (AWAS) was developed based on a systematic review and qualitative research on how to measure activity patterns of women with young children (WYC). AWAS assesses activity performed across five domains (planned activities, employment, childcare, domestic responsibilities and transport), and intensity levels (sitting, light-intensity, brisk walking, moderate-intensity and vigorous-intensity) in a typical week in the past month. The purpose of this study was to assess the test-retest reliability and criterion validity of the AWAS. Methods: WYC completed the AWAS on two occasions 7-d apart (test-retest reliability protocol) and/or wore an MTI ActiGraph accelerometer for 7-d in between (validity protocol). Forty WYC (mean age 35 ± 5yrs) completed the test-retest reliability protocol and 75 WYC (mean age 33 ± 5yrs) completed the validity protocol. Interclass Correlation Coefficients (ICC) between AWAS administrations and Spearman’s Correlation Coefficients (rs) between AWAS and MTI data were calculated. Results: AWAS showed good test-retest reliability (ICC=0.80 (0.65-0.89)) and acceptable criterion validity (rs= 0.28, p=0.01) for measuring weekly health-enhancing physical activity. AWAS also provided repeatable and valid estimates of sitting time (test-retest reliability ICC=0.42 (0.13-0.64), and criterion validity (rs= 0.32, p=0.006)). Conclusion: The measurement properties of the AWAS are comparable to those reported for existing self-report measures of physical activity. However, AWAS offers a more comprehensive and flexible alternative for accurately assessing different domains and intensities of activity relevant to WYC. Future research should investigate whether the AWAS is a suitable measure of intervention efficacy by examining its sensitivity to change.

A study of the attitudes towards unethical selling amongst Chinese salespeople

The latter part of the twentieth century saw the Chinese economy moving towards a socialist market economy rather than a planned system. Despite growing interest in Chinese business ethics, little work has examined ethical issues concerning the Chinese sales force. This study draws from existing work on Chinese and Western business and sales ethics to develop hypotheses regarding the perceptions of unethical selling behaviour of modern Chinese salespeople. A survey of Chinese sales executives is conducted and statistically analysed. Results are compared with those reported in previous US-based research with regard to differences in perceptions of unethical selling behaviour. The results indicate that contemporary Chinese salespeople were more favourably disposed than expected towards unethical selling behaviour, and also more favourably disposed than previously studied US salespeople. Younger Chinese salespeople evaluated unethical behaviours more favourably than older ones. The results are discussed, along with implications for theory, practice and future work.

Is the new age phenomenon connected to delusion-like experiences? Analysis of survey data from Australia

Recent studies have shown that delusion-like experiences (DLEs) are common among general populations. This study investigates whether the prevalence of these experiences are linked to the embracing of New Age thought. Logistic regression analyses were performed using data derived from a large community sample of young adults (N = 3777). Belief in a spiritual or higher power other than God was found to be significantly associated with endorsement of 16 of 19 items from Peters et al. (1999b) Delusional Inventory following adjustment for a range of potential confounders, while belief in God was associated with endorsement of four items. A New Age conception of the divine appears to be strongly associated with a wide range of DLEs. Further research is needed to determine a causal link between New Age philosophy and DLEs (e.g. thought disturbance, suspiciousness, and delusions of grandeur).

A population survey of the penetrance of contact lens wear in Australia : rationale, methodology and results

Purpose: A population based, cross-sectional telephone survey was conducted to estimate the total penetrance of contact lens wear in Australia. Methods: A total of 42,749 households around Australia were randomly selected from the national electronic telephone directory based on postcode distribution. Before contact was attempted, letters of introduction were sent. The number of individuals and contact lens wearers in each household was ascertained and lens wearers were interviewed to determine details of lens type and mode of wear using a structured questionnaire. Results: Of households contacted, 59.2% (19,171/32,405) agreed to participate. Response rates were only marginally higher amongst households that first received a letter of introduction. In these households, 35,914 individuals were identified, of which, 1,798 were contact lens wearers. The penetrance of contact lens wear during the study period was 5.01% (95% CI: 4.78-5.24). Soft hydrogel lenses had the largest penetrance in the community, (66.7% of all wearers), however, their market share decreased significantly over the study period with increased uptake of newly introduced lens types. Conclusions: The penetrance of contact lens wear concurs with market estimates and equates to approximately 680,000 contact lens wearers aged between 15 and 64 years in Australia. The low response rate obtained in this study highlights the difficulty in contemporary use of telephone survey methodology