Flow analysis by using solenoid valves for As(III) determination in natural waters by an on-line separation and pre-concentration system coupled to a tungsten coil atomizer

A flow system coupled to a tungsten coil atomizer in an atomic absorption spectrometer (TCA-AAS) was developed for As(III) determination in waters, by extraction with sodium diethyldithiocarbamate (NaDDTC) as complexing agent, and by sorption of the As(III)-DDTC complex in a micro-column filled with 5 mg C18 reversed phase (10 µL dry sorbent), followed by elution with ethanol. A complete pre-concentration/elution cycle took 208 s, with 30 s sample load time (1.7 mL) and 4 s elution time (71 µL). The interface and software for the synchronous control of two peristaltic pumps (RUN/ STOP), an autosampler arm, seven solenoid valves, one injection valve, the electrothermal atomizer and the spectrometer Read function were constructed. The system was characterized and validated by analytical recovery studies performed both in synthetic solutions and in natural waters. Using a 30 s pre-concentration period, the working curve was linear between 0.25 and 6.0 µg L-1 (r = 0.9976), the retention efficiency was 94±1% (6.0 µg L-1), and the pre-concentration coefficient was 28.9. The characteristic mass was 58 pg, the mean repeatability (expressed as the variation coefficient) was 3.4% (n=5), the detection limit was 0.058 µg L-1 (4.1 pg in 71 µL of eluate injected into the coil), and the mean analytical recovery in natural waters was 92.6 ± 9.5 % (n=15). The procedure is simple, economic, less prone to sample loss and contamination and the useful lifetime of the micro-column was between 200-300 pre-concentration cycles.

Comprovador semiautomàtic per a automatisme de control de portes

L’objectiu d’aquest projecte és el de dissenyar un comprovador semiautomàtic per a un model d’automatisme que controla l’obertura i el tancament d’una porta. Aquest automatisme requereix d’una verificació de qualitat abans de ser introduït al mercat. La seva comprovació manual és lenta. L’objectiu principal del comprovador, és el de reduir aquest temps de test en almenys un 50% i fer més fàcil la detecció dels errors. El comprovador consta d’un suport per a l’automatisme que transmet els seus punts crítics a una placa de control. Conté un microcontrolador PIC16F887 que gestiona totes les entrades i sortides provinents de l’automatisme. També controla una pantalla LCD de 16x2 caràcters, que mostra els passos a seguir del test i si hi ha algun error. Es fa el disseny d’aquesta placa des de el hardware fins al software. Els resultats del projecte són satisfactoris, ja que compleix els objectius marcats i és un sistema que s’utilitza en l’empresa on es fabriquen aquests automatismes de control de portes.

Quality standards in e-business software development

Large enterprises have for many years employed eBusiness solutions in order to improve their efficiency. Smaller companies, however, have not been able to leverage these technologies due to the high level of know-how and resources required in implementing them. To solve this, novel software services are being developed to facilitate eBusiness adoption for the small enterprise with the aim of making B2Bi feasible not only between large organisations but also between trading partners of all sizes. The objective of this study was to find what standards and techniques on eBusiness and software testing and quality assurance fit best for building these new kinds of software considering the requirements their unique eBusiness approach poses. The research was conducted as a literature study with focus on standards on software testing and quality assurance together with standards on eBusiness. The study showed that the current software testing and quality assurance standards do not possess such characteristics as would make select standards evidently better fitted for building this type of software, which were established to be best developed as web services in order for them to meet their requirements. A selection of eBusiness standards and technologies was proposed to support this approach. The main finding in the study was, however, that these kinds of web services that have high interoperability requirements will have to be able to carry out automated interoperability and conformance testing as part of their operation; this objective dictates how the software are built and how testing during software development is to be done. The study showed that research on automated interoperability and conformance testing for web services is still limited and more research is needed to make the building of highly-interoperable web services more feasible.

Planning and ramping up a new SW Testing site

During recent years, mobile phone markets have changed significantly. Asian markets have become vital for the manufacturers with their millions of end users and multiple major mobile network operators. This has resulted in software development as global companies have research and development sites running in multiple locations, including Asia. The reasons behind this are not only in reducing labor costs but also in capitalizing on the local knowledge and knowhow. A ramp-up site has multiple effects in the software development and software release activities. This thesis focuses on representing the importance of software testing as part of software development process and highlighting issues that need to be considered during ramp-up activities. In addition this work tries to emphasize the importance of communication between parties and information gathering prior to setting up the ramp-up site. The output of this thesis was successful software testing site ramp-up within the set time limits. The quality of software testing work was assured and the ramp-up -project requirements were achieved.

Kuorman tasaus web-palvelimissa

Web-palvelussa sivuston suorituskyky muodostaa suuren osan käyttökokemuksen mielekkyydestä. Sivuston ollessa kuormitetumpi kuin normaalisti, saattaa se toimia tavallista hitaammin. Tasaamalla yhden web-palvelimen kuormaa muille palvelimille, joko laitteisto tai ohjelmistopohjaisella kuormantasauksella, voidaan saavuttaa merkittäviä suorituskykyparannuksia koko palvelulle. Teoriaosassa selvitettiin kuormantasaukseen soveltuvien algoritmien toimintaa sekä tietokantapohjaista replikaatiota, joka välittää saamansa tiedon lähes välittömästi toiselle palvelimelle. Apachen kuormantasausmoduuliin sekä sen sisältämiin algoritmeihin luotiin myös katsaus teoriaosassa. Varsinaisessa työssä luotiin Apachen kuormantasauspalvelimen ja kahden suorituspalvelimen avulla toimiva palvelinjärjestelmä. Kuormantasaimeen asennettiin käyttöön tahmeat sessiot, joiden toimintaa selvitettiin Drupal-ohjelman avulla. Apachessa on ollut ongelmia tahmeiden sessioiden kanssa, mutta työssä huomattiin kaiken toimivan mainiosti. Kuormantasaus ja tietokantojen replikaatio toimi, kuten odotettiin.

Integrating user experience into early phases of software development

The value and benefits of user experience (UX) are widely recognized in the modern world and UX is seen as an integral part of many fields. This dissertation integrates UX and understanding end users with the early phases of software development. The concept of UX is still unclear, as witnessed by more than twenty-five definitions and ongoing argument about its different aspects and attributes. This missing consensus forms a problem in creating a link between UX and software development: How to take the UX of end users into account when it is unclear for software developers what UX stands for the end users. Furthermore, currently known methods to estimate, evaluate and analyse UX during software development are biased in favor of the phases where something concrete and tangible already exists. It would be beneficial to further elaborate on UX in the beginning phases of software development. Theoretical knowledge from the fields of UX and software development is presented and linked with surveyed and analysed UX attribute information from end users and UX professionals. Composing the surveys around the identified 21 UX attributes is described and the results are analysed in conjunction with end user demographics. Finally the utilization of the gained results is explained with a proof of concept utility, the Wizard of UX, which demonstrates how UX can be integrated into early phases of software development. The process of designing, prototyping and testing this utility is an integral part of this dissertation. The analyses show statistically significant dependencies between appreciation towards UX attributes and surveyed end user demographics. In addition, tests conducted by software developers and industrial UX designer both indicate the benefits and necessity of the prototyped Wizard of UX utility. According to the conducted tests, this utility meets the requirements set for it: It provides a way for software developers to raise their know-how of UX and a possibility to consider the UX of end users with statistical user profiles during the early phases of software development. This dissertation produces new and relevant information for the UX and software development communities by demonstrating that it is possible to integrate UX as a part of the early phases of software development.

Ketterien menetelmien hyödyntäminen sulautettujen järjestelmien kehityksessä

Sulautettujen järjestelmien projekti voidaan toteuttaa monella tavalla. Projektiin liittyy aina ohjelmiston, sekä laitteiston kehittäminen. Ohjelmiston suunnittelulla on suuri painoarvo ja tämä näkyy erityisesti varsinkin kulutuselektroniikassa. Kannettavien laitteiden räjähdysmäisesti lisääntynyt myynti ja käyttö ovat tuoneet markkinoille lisää rahaa ja mielenkiintoa. Tästä johtuen markkinoille tulee joka vuosi entistä kehittyneempiä laitteita. Laitteiston kehittymisen sekä asiakkaiden vaatimusten lisääntyessä ohjelmistojen koko on kasvanut. Tämä on luonut tarpeen myös sulautettujen järjestelmien projekteille ottaa käyttöön jokin tietty metodi ohjelmistojen tuotannossa. Ongelmana on kuitenkin se, että sulautettujen järjestelmien projekteihin on sovellettu metodeita, joita ei ole alun perin suunniteltu laitteiston ja ohjelmiston yhteissuunnitteluun ja toteuttamiseen. Miten voidaan valita oikea metodi sulautettujen järjestelmien projektiin? Tässä työssä esitellään perinteisiä ohjelmistotuotannon metodeita, sekä keskitytään eri ketterien metodien tutkimiseen. Tämä työ selvittää mikä vaikuttaa metodin valintaan sulautetun järjestelmän projektille. Tässä tutkimuksessa päädytään siihen johtopäätökseen, että sulautetuin järjestelmän suunnittelussa ja toteutuksessa ketterien menetelmien käyttö parantaa projektin mahdollisuutta onnistua täyttämään asiakkaan vaatimukset. Ketterien menetelmien käyttö ei poista tarvetta kehittää menetelmää, joka lähtökohtaisesti ottaa huomioon laitteiston ja ohjelmiston yhteissuunnittelun.

Augmented reality systems for weed economic thresholds applications

The augmented reality (AR) technology has applications in many fields as diverse as aeronautics, tourism, medicine, and education. In this review are summarized the current status of AR and it is proposed a new application of it in weed science. The basic algorithmic elements for AR implementation are already available to develop applications in the area of weed economic thresholds. These include algorithms for image recognition to identify and quantify weeds by species and software for herbicide selection based on weed density. Likewise, all hardware necessary for AR implementation in weed science are available at an affordable price for the user. Thus, the authors propose weed science can take a leading role integrating AR systems into weed economic thresholds software, thus, providing better opportunities for science and computer-based weed control decisions.

Kuljetustensuunnittelu- ja reitinoptimointiohjelmiston kaupallistamiseen vaikuttavat keskeiset ominaisuudet

Ajoneuvojen reititystä on tutkittu 1950-luvulta asti, alunperin etsiessä polttoainekuljetuksille optimaalisinta reittiä varastolta useille palveluasemille. Siitä lähtien ajoneuvon reititystehtäviä on tutkittu akateemisesti ja niistä on muodostettu kymmeniä erilaisia variaatioita. Tehtävien ratkaisumenetelmät jaetaan tyypillisesti tarkkoihin menetelmiin sekä heuristiikkoihin ja metaheuristiikkoihin. Konetehon ja heuristiikoissa käytettävien algoritmien kehittymisen myötä reitinoptimointia on alettu tarjota kaupallisesti. CO-SKY-projektin tavoitteena on kaupallistaa web-pohjainen tai toiminnanohjausjärjestelmään integroitava ajoneuvon reititys. Diplomityössä tutkitaan kuljetustensuunnittelu- ja reitinoptimointiohjelmistojen kaupallistamiseen vaikuttavia keskeisiä ominaisuuksia. Ominaisuuksia on tarkasteltu: 1) erityisesti pk-kuljetusyritysten tarpeiden ja vaatimusten pohjalta, ja 2) markkinoilla olevien ohjelmistojen tarjontaa arvioiden. Näiden pohjalta on myös pyritty arvioimaan kysynnän ja tarjonnan kohtaamista. Pilottiasiakkaita haastattelemalla ohjelmistolle on kyetty asettamaan vaatimuksia, mutta samalla on kuultu käyttäjien mielipiteitä optimoinnista. Lukuisia logistiikkaohjelmistojen tarjoajia on haastateltu logistiikkamessuilla sekä Suomessa että Saksassa. Haastattelujen perusteella on saatu käsitys kyseisistä ohjelmista sekä optimoinnin tarjonnasta että kysynnästä. Akateeminen tutkimus aiheesta on laajaa, koskien niin teknistä toteutusta kuin myös (kysely-)tutkimuksia tarjolla olevien ohjelmistojen ominaisuuksista ja laadusta. Kuljetusyritysten tarpeissa on vaihtelua yritys- ja alakohtaisesti. Perusongelmat ovat samoja, joita reitinoptimoinnin akateemisessa tutkimuksessa käsitellään ja joita kaupalliset ohjelmistot pystyvät ratkaisemaan. Vaikka reitinoptimoinnilla saatavat hyödyt ovat mitattavissa, suunnittelu etenkin pk-yrityksissä tehdään pääosin yhä käsin. Messuhaastattelujen ja loppukäyttäjien mielipiteiden perusteella voidaan todeta kaupallisten ratkaisujen olevan suunniteltu isommille kuljetusyrityksille: tyypillisen it-projektin hinta, käyttöönottoaika ja asennus sekä ratkaisun takaisinmaksuaika vaikuttavat pk-yritysten hankintapäätökseen. Kaupallistamiseen liittyen haasteet liittyvät erityisesti segmentointiin ja markkinointiin asiakasarvon todentamisen ja sen välittämisen kautta.

Parasitic Order Machine. A Sociology and Ontology of Information Securing

This study examines information security as a process (information securing) in terms of what it does, especially beyond its obvious role of protector. It investigates concepts related to ‘ontology of becoming’, and examines what it is that information securing produces. The research is theory driven and draws upon three fields: sociology (especially actor-network theory), philosophy (especially Gilles Deleuze and Félix Guattari’s concept of ‘machine’, ‘territory’ and ‘becoming’, and Michel Serres’s concept of ‘parasite’), and information systems science (the subject of information security). Social engineering (used here in the sense of breaking into systems through non-technical means) and software cracker groups (groups which remove copy protection systems from software) are analysed as examples of breaches of information security. Firstly, the study finds that information securing is always interruptive: every entity (regardless of whether or not it is malicious) that becomes connected to information security is interrupted. Furthermore, every entity changes, becomes different, as it makes a connection with information security (ontology of becoming). Moreover, information security organizes entities into different territories. However, the territories – the insides and outsides of information systems – are ontologically similar; the only difference is in the order of the territories, not in the ontological status of entities that inhabit the territories. In other words, malicious software is ontologically similar to benign software; they both are users in terms of a system. The difference is based on the order of the system and users: who uses the system and what the system is used for. Secondly, the research shows that information security is always external (in the terms of this study it is a ‘parasite’) to the information system that it protects. Information securing creates and maintains order while simultaneously disrupting the existing order of the system that it protects. For example, in terms of software itself, the implementation of a copy protection system is an entirely external addition. In fact, this parasitic addition makes software different. Thus, information security disrupts that which it is supposed to defend from disruption. Finally, it is asserted that, in its interruption, information security is a connector that creates passages; it connects users to systems while also creating its own threats. For example, copy protection systems invite crackers and information security policies entice social engineers to use and exploit information security techniques in a novel manner.

Software business expansion through distribution channel : Case M-Files - Denmark

The purpose of this study was to find out how a software company can successfully expand business to the Danish software market through distribution channel. The study was commissioned by a Finnish software company and it was conducted using a qualitative research method by analyzing external and internal business environment, and interviewing Danish ICT organizations and M-Files personnel. Interviews were semi-structured interviews, which were designed to collect comprehensive information on the existing ICT and software market in Denmark. The research used three external and internal analyzing frameworks; PEST analysis (market level), Porter´s Five Force analysis (industry level competition) and SWOT analysis (company level). Distribution channels theory was a base to understand why and what kind of distribution channels the case company uses, and what kind of channels target markets companies’ uses. Channel strategy and design were integrated to the industry level analysis. The empirical findings revealed that Denmark has very business friendly ICT environment. Several organizations have ranked Denmark´s information and communication technology as the best in the world. Denmark’s ICT and software market are relatively small, compared to many other countries in Europe. Danish software market is centralized. Largest software clusters are in the largest cities; Copenhagen, Aarhus, Odense and Aalborg. From these clusters, software companies can most likely find suitable resellers. The following growing trends are clearly seen in the software market: mobile and wireless applications, outsourcing, security solutions, cloud computing, social business solutions and e-business solutions. When expanding software business to the Danish market, it is important to take into account these trends. In Denmark distribution channels varies depending on the product or service. For many, a natural distribution channel is a local partner or internet. In the public sector solutions are purchased through a public procurement process. In the private sector the buying process is more straight forwarded. Danish companies are buying software from reliable suppliers. This means that they usually buy software direct from big software vendors or local partners. Some customers prefer to use professional consulting companies. These consulting companies can strongly influence on the selection of the supplier and products, and in this light, consulting companies can be important partners for software companies. Even though the competition is fierce in ECM and DMS solutions, Danish market offers opportunities for foreign companies. Penetration to the Danish market through reseller channel requires advanced solutions and objective selection criteria for channel partners. Based on the findings, Danish companies are interested in advanced and efficient software solutions. Interest towards M-Files solutions was clearly seen and the company has excellent opportunity to expand business to the Danish market through reseller channel. Since the research explored the Danish ICT and software market, the results of the study may offer valuable information also to the other software companies which are expanding their business to the Danish market.

Hardware Accelarated Visual Tracking Algorithms. A Systematic Literature Review

Many industrial applications need object recognition and tracking capabilities. The algorithms developed for those purposes are computationally expensive. Yet ,real time performance, high accuracy and small power consumption are essential measures of the system. When all these requirements are combined, hardware acceleration of these algorithms becomes a feasible solution. The purpose of this study is to analyze the current state of these hardware acceleration solutions, which algorithms have been implemented in hardware and what modifications have been done in order to adapt these algorithms to hardware.

Impact of Information Communication Technology (ICT) on Professional Development and Educational Needs of Library Professionals in the Universities of Kerala

The shift from print to digital information has a high impact on all components of the academic library system in India especially the users, services and the staff. Though information is considered as an important resource, the use of ICT tools to collect and disseminate information has been in a slow pace in majority of the University libraries This may be due to various factors like insufficient funds, inadequate staff trained in handling computers and software packages, administrative concerns etc. In Kerala, automation has been initiated in almost all University libraries using library automation software and is under different stages of completion. There are not much studies conducted about the effects of information communication technologies on the professional activities of library professionals in the universities in Kerala. It is important to evaluate whether progress in ICT has had any impact on the library profession in these highest educational institutions. The aim of the study is to assess whether the developments in information communication technologies have any influence on the library professionals’ professional development, and the need for further education and training in the profession and evaluate their skills in handling developments in ICT. The total population of the study is 252 including the permanently employed professional library staff in central libraries and departmental libraries in the main campuses of the universities under study. This is almost a census study of the defined population of users. The questionnaire method was adopted for collection of data for this study, supplemented by interviews of Librarians to gather additional information. Library Professionals have a positive approach towards ICT applications and services in Libraries, but majority do not have the opportunities to develop their skills and competencies in their work environment. To develop competitive personnel in a technologically advanced world, high priority must be given to develop competence in ICT applications, library management and soft skills in library professionals, by the University administrators and Library associations. Library science schools and teaching departments across the country have to take significant steps to revise library science curriculum, and incorporate significant changes to achieve the demands and challenges of library science profession.

Performance Evaluation of the Scheme 86 and HP Precision Architecture

The Scheme86 and the HP Precision Architectures represent different trends in computer processor design. The former uses wide micro-instructions, parallel hardware, and a low latency memory interface. The latter encourages pipelined implementation and visible interlocks. To compare the merits of these approaches, algorithms frequently encountered in numerical and symbolic computation were hand-coded for each architecture. Timings were done in simulators and the results were evaluated to determine the speed of each design. Based on these measurements, conclusions were drawn as to which aspects of each architecture are suitable for a high- performance computer.

Programming & Software

An overview of programming and software development.