Sistema autónomo para carga de baterías mediante una instalación fotovoltaica con aplicación directa al vehículo eléctrico y usos

La situación energética actual es insostenible y como consecuencia se plantea un escenario próximo orientado a conseguir un futuro energético sostenible que permita el desarrollo económico y el bienestar social. La situación ambiental actual está afectada directamente por la combustión de combustibles fósiles que en 2013 constituyeron el 81% de la energía primaria utilizada por el ser humano y son la principal fuente antropogénica de gases de efecto invernadero. Los informes del IPCC1, ponen de manifiesto que el cambio climático se ha consolidado durante los últimos años y en la conferencia de la ONU sobre cambio climático de París que se celebrará a finales de 2015, se pretende que los gobiernos suscriban un acuerdo universal para limitar las emisiones de gases de efecto invernadero y evitar que el incremento de la temperatura media global supere los 2°C. Por otra parte, en el interior de las ciudades es especialmente preocupante, por su efecto directo sobre la salud humana, el impacto ambiental producido por las emisiones de NOx que generan el transporte de personas y mercancías. El sector del transporte fue responsable en 2012 del 27,9% del consumo final de energía. Una vez expuesto el escenario energético y ambiental actual, en esta tesis, se analiza la eficiencia de un sistema autónomo fotovoltaico para la carga de baterías de vehículos eléctricos y el uso del mismo con otras cargas, con el objetivo de aprovechar al máximo la energía eléctrica generada y contribuir a la utilización de energía limpia que no produzca impacto ambiental. Como primer paso para el desarrollo de la tesis se hizo un estudio de trabajos previos comenzando por las primeras aplicaciones de la energía fotovoltaica en los vehículos solares para después pasar a trabajos más recientes enfocados al suministro de energía a los vehículos eléctricos. También se hizo este estudio sobre las metodologías de simulación en los sistemas fotovoltaicos y en el modelado de distintos componentes. Posteriormente se eligieron, dentro de la amplia oferta existente en el mercado, los componentes con características técnicas más adecuadas para este tipo de instalaciones y para las necesidades que se pretenden cubrir. A partir de los parámetros técnicos de los componentes elegidos para configurar la instalación autónoma y utilizando modelos contrastados de distintos componentes, se ha desarrollado un modelo de simulación en ordenador del sistema completo con el que se han hecho simulaciones con distintos modos de demanda de energía eléctrica, según los modos de carga disponibles en el vehículo eléctrico para corriente alterna monofásica de 230 V. También se han simulado distintos tamaños del generador fotovoltaico y del sistema de acumulación de energía eléctrica para poder determinar la influencia de estos parámetros en los balances energéticos del sistema. Utilizando recursos propios el doctorando ha realizado la instalación real de un sistema fotovoltaico que incluye sistema de acumulación e inversor en un edificio de su propiedad. Para la realización de la tesis, La Fundación de Fomento e Innovación Industrial (F2I2) ha facilitado al doctorando un dispositivo que permite realizar la alimentación del vehículo eléctrico en modo 2 (este modo emplea un adaptador que incorpora dispositivos de seguridad y se comunica con el vehículo permitiendo ajustar la velocidad de recarga) y que ha sido necesario para los trabajos desarrollados. Se ha utilizado la red eléctrica como sistema de apoyo de la instalación fotovoltaica para permitir la recarga en el modo 2 que requiere más potencia que la proporcionada por el sistema fotovoltaico instalado. Se han analizado mediante simulación distintos regímenes de carga que se han estudiado experimentalmente en la instalación realizada, a la vez que se han hecho ensayos que se han reproducido mediante simulación con los mismos valores de radiación solar y temperatura con objeto de contrastar el modelo. Se han comparado los resultados experimentales con los obtenidos mediante simulación con objeto de caracterizar el comportamiento del sistema de acumulación (energía eléctrica suministrada y tensión de salida en las baterías) y del generador fotovoltaico (energía eléctrica fotovoltaica suministrada). Por último, se ha realizado un estudio económico de la instalación autónoma fotovoltaica ejecutada y simulada. En el mismo se ha planteado la utilización de fondos propios (como realmente se ha llevado a cabo) y la utilización de financiación, para determinar dos posibles escenarios que pudieran ser de utilidad a un propietario de vehículo eléctrico. Se han comparado los resultados obtenidos en los dos escenarios propuestos del estudio económico del sistema, en cuanto a los parámetros de tiempo de retorno de la inversión, valor actual neto de la inversión y tasa interna de retorno de la misma. Las conclusiones técnicas obtenidas, permiten la utilización del sistema con los modos de carga ensayados y otro tipo de cargas que aprovechen la generación eléctrica del sistema. Las baterías ofrecen mejor comportamiento cuando el aporte fotovoltaico está presente, pero no considera adecuado la conexión de cargas elevadas a un sistema de acumulación de gel (plomo-acido) como el que se ha utilizado, debido al comportamiento de este tipo de baterías ante demandas de intensidad de corriente eléctrica elevadas. Por otra parte, el comportamiento de este tipo de baterías con valores de intensidad de corriente eléctrica inferiores a 10 A en ausencia de energía fotovoltaica, con el objetivo de utilizar la generación de energía eléctrica diaria acumulada en el sistema, sí resulta interesante y ofrece un buen comportamiento del sistema de acumulación. Las circunstancias actuales de mercado, que carece de sistemas de acumulación de litio con precios de compra interesantes, no han permitido poder experimentar este sistema de acumulación en la instalación autónoma fotovoltaica ejecutada, tampoco se ha podido obtener el favor de ningún fabricante para ello. Actualmente hay disponibles sistemas de acumulación en litio que no se comercializan en España y que serían adecuados para el sistema de acumulación de energía propuesto en este estudio, que deja abierta las puertas para futuros trabajos de investigación. Las conclusiones económicas obtenidas, rentabilizan el uso de una instalación autónoma fotovoltaica con consumo instantáneo, sin acumulación de energía eléctrica. El futuro de conexión a red por parte de estas instalaciones, cuando se regule, aportará un incentivo económico para rentabilizar con menos tiempo las instalaciones autónomas fotovoltaicas, esto también deja la puerta abierta a futuros trabajos de investigación. El sistema de acumulación de energía aporta el mayor peso económico de inversión en este tipo de instalaciones. La instalación estudiada aporta indicadores económicos que la hacen rentable, pero se necesitaría que los precios de acumulación de la energía en sistemas eficientes estén comprendidos entre 100-200 €/kWh para que el sistema propuesto en este trabajo resulte atractivo a un potencial propietario de un vehículo eléctrico. ABSTRACT The current energy situation is untenable; it poses a scenario next focused on reaching a sustainable energy future, to allow economic development and social welfare. The environmental current situation is affected directly by the combustion of fossil fuels that in 2013 constituted 81 % of the primary energy used by the human being and they are the principal source human of greenhouse gases. The reports of the IPCC2, they reveal that the climate change has consolidated during the last years and in the conference of the UNO on climate change of Paris that will be celebrated at the end of 2015, there is claimed that the governments sign a universal agreement to limit the emission of greenhouse gases and to prevent that the increase of the global average temperature overcomes them 2°C. On the other hand, inside the cities it is specially worrying, for his direct effect on the human health, the environmental impact produced by the NOx emissions that generate the persons' transport and goods. The sector of the transport was responsible in 2012 of 27,9 % of the final consumption of energy. Once exposed the scenario and present environmental energy, in this thesis, it has analyzed the efficiency of an autonomous photovoltaic system for charging electric vehicles, and the use of the same with other workloads, with the objective to maximize the electrical energy generated and contribute to the use of clean energy that does not produce environmental impact. Since the first step for the development of the thesis did to itself a study of previous works beginning for the first applications of the photovoltaic power in the solar vehicles later to go on to more recent works focused on the power supply to the electrical vehicles. Also this study was done on the methodologies of simulation in the photovoltaic systems and in the shaped one of different components. Later they were chosen, inside the wide existing offer on the market, the components with technical characteristics more adapted for this type of facilities and for the needs that try to cover. From the technical parameters of the components chosen to form the autonomous installation and using models confirmed of different components, a model of simulation has developed in computer of the complete system with which simulations have been done by different manners of demand of electric power, according to the available manners of load in the electrical vehicle for single-phase alternating current of 230 V. Also there have been simulated different sizes of the photovoltaic generator and of the system of accumulation of electric power to be able to determine the influence of these parameters in the energy balances of the system. Using own resources the PhD student has realized a real installation of a photovoltaic system that includes system of accumulation and investing in a building of his property. For the accomplishment of the thesis, The Foundation of Promotion and Industrial Innovation (F2I2) it has facilitated to the PhD student a device that allows to realize the supply of the electrical vehicle in way 2 (this way uses an adapter that incorporates safety devices and communicates with the vehicle allowing to fit the speed of recharges) and that has been necessary for the developed works. The electrical network has been in use as system of support of the photovoltaic installation for allowing it her recharges in the way 2 that more power needs that provided by the photovoltaic installed system. There have been analyzed by means of simulation different rate of load that have been studied experimentally in the realized installation, simultaneously that have done to themselves tests that have reproduced by means of simulation with the same values of solar radiation and temperature in order the model contrasted. The experimental results have been compared by the obtained ones by means of simulation in order to characterize the behavior of the system of accumulation (supplied electric power and tension of exit in the batteries) and of the photovoltaic generator (photovoltaic supplied electric power). Finally, there has been realized an economic study of the autonomous photovoltaic executed and simulated installation. In the same one there has appeared the utilization of own funds (since really it has been carried out) and the utilization of financing, to determine two possible scenes that could be of usefulness to an owner of electrical vehicle. There have been compared the results obtained in both scenes proposed of the economic study of the system, as for the parameters of time of return of the investment, current clear value of the investment and rate hospitalizes of return of the same one. The technical obtained conclusions, they make the utilization of the system viable with the manners of load tested and another type of loads of that they take advantage the electrical generation of the system. The batteries offer better behavior when the photovoltaic contribution is present, but he does not consider to be suitable the connection of loads risen up to a system of accumulation of gel (lead - acid) as the one that has been in use, due to the behavior of this type of batteries before demands of intensity of electrical current raised. On the other hand, the behavior of this type of batteries with low values of intensity of electrical current to 10 To in absence of photovoltaic power, with the aim to use the generation of daily electric power accumulated in the system, yes turns out to be interesting and offers a good behavior of the system of accumulation. The current circumstances of market, which lacks systems of accumulation of lithium with interesting purchase prices, have not allowed to be able to experience this system of accumulation in the autonomous photovoltaic executed installation, neither one could have obtained the favor of any manufacturer for it. Nowadays there are available systems of accumulation in lithium that is not commercialized in Spain and that they would be adapted for the system of accumulation of energy proposed in this study, which makes the doors opened for future works of investigation. The economic obtained conclusions; they make more profitable the use of an autonomous photovoltaic installation with instantaneous consumption, without accumulation of electric power. The future of connection to network on the part of these facilities, when it is regulated, will contribute an economic incentive to make profitable with less time the autonomous photovoltaic facilities, this also leaves the door opened for future works of investigation. The system of accumulation of energy contributes the major economic weight of investment in this type of facilities. The studied installation contributes economic indicators that make her profitable, but it would be necessary that the prices of accumulation of the energy in efficient systems are understood between 100-200 € in order that the system proposed in this work turns out to be attractive to a proprietary potential of an electrical vehicle.

Valorización energética de biomasas en el marco de la política energética española. Incentivos económico-financieros y políticos, aportación de valor añadido y prospectiva estratégica de desarrollo

El modelo económico actual basado en el consumo y en la búsqueda permanente de una mayor calidad de vida, unido a una población mundial en aumento, contribuye a incrementar la demanda de servicios energéticos para cubrir las necesidades de energía de las personas y las industrias. Desde finales del siglo XIX la energía se ha generado fundamentalmente a partir de combustibles fósiles (carbón, petróleo y gas), convertidos en el suministro energético predominante mundialmente. Las emisiones de gases de efecto invernadero que genera la prestación de servicios energéticos han contribuido considerablemente al aumento histórico de las concentraciones de esos gases en la atmósfera, hasta el punto de que el consumo de combustibles fósiles es responsable de la mayoría de las emisiones antropogénicas (IPCC, 2012). Existen diversas opciones para disminuir las emisiones de gases de efecto invernadero del sector energético y con ello contribuir a mitigar el cambio climático, entre otras sería viable aumentar la eficiencia energética y sustituir combustibles de origen fósil por combustibles de origen renovable, pudiendo garantizar un suministro de energía sostenible, competitivo y seguro. De todas las energías renovables susceptibles de formar parte de una cartera de opciones de mitigación, esta tesis se centra en la bioenergía generada a partir de la valorización energética de las biomasas agrícolas, forestales, ganaderas o de otro tipo, con fines eléctricos y térmicos. Con objeto de mostrar su capacidad para contribuir a mitigar el cambio climático y su potencial contribución al desarrollo socioeconómico, a la generación de energía distribuida y a reducir determinados efectos negativos sobre el medio ambiente, se ha analizado minuciosamente el sector español de la biomasa en su conjunto. Desde el recurso biomásico que existe en España, las formas de extraerlo y procesarlo, las tecnologías de valorización energética, sus usos energéticos principales y la capacidad de implementación del sector en España. Asimismo se ha examinado el contexto energético tanto internacional y europeo como nacional, y se han analizado pormenorizadamente los instrumentos de soporte que han contribuido de manera directa e indirecta al desarrollo del sector en España. Además, la tesis integra el análisis de los resultados obtenidos mediante dos metodologías diferentes con fines también distintos. Por un lado se han obtenido los resultados medioambientales y socioeconómicos de los análisis de ciclo de vida input-output generados a partir de las cinco tecnologías biomásicas más ampliamente utilizadas en España. Y por otro lado, en base a los objetivos energéticos y medioambientales establecidos, se han obtenido distintas proyecciones de la implementación del sector a medio plazo, en forma de escenarios energéticos con horizonte 2035, mediante el modelo TIMES-Spain. La tesis ofrece también una serie de conclusiones y recomendaciones que podrían resultar pertinentes para los agentes que constituyen la cadena de valor del propio sector e interesados, así como para la formulación de políticas y mecanismos de apoyo para los agentes decisores, tanto del ámbito de la Administración General del Estado como autonómico y regional, sobre las características y ventajas de determinadas formas de valorización, sobre los efectos sociales y medioambientales que induce su uso, y sobre la capacidad de sector para contribuir a determinadas políticas más allá de las puramente energéticas. En todo caso, esta tesis doctoral aspira a contribuir a la toma de decisiones idóneas tanto a los agentes del sector como a responsables públicos, con objeto de adoptar medidas orientadas a fomentar modificaciones del sistema energético que incrementen la proporción de energía renovable y, de esta forma, contribuir a mitigar la amenaza que supone el cambio climático no solo en la actualidad, sino especialmente en los próximos años para las generaciones venideras. ABSTRACT The current economic model based on both, consumption and the constant search for greater quality of life, coupled with a growing world population, contribute to increase the demand for energy services in order to meet the energy needs of people and industries. Since the late nineteenth century, energy has been basically generated from fossil fuels (coal, oil and gas), which converted fossil fuels into the predominant World energy supply source. Emissions of greenhouse gases generated by the provision of energy services have contributed significantly to the historical increase in the concentrations of these gases in the atmosphere, to the extent that the consumption of fossil fuels is responsible for most of the anthropogenic emissions (IPCC, 2012). There are several options to reduce emissions of greenhouse gases in the energy sector and, thereby, to contribute to mitigate climate change. Among others, would be feasible to increase energy efficiency and progressively replacing fossil fuels by renewable fuels, which are able to ensure a sustainable, competitive and secure energy supply. Of all the renewable energies likely to form part of a portfolio of mitigation options, this thesis focuses on bioenergy generated from agricultural, forestry, farming or other kind of biomass, with electrical and thermal purposes. In order to show their ability to contribute to mitigate climate change and its potential contribution to socio-economic development, distributed energy generation and to reduce certain negative effects on the environment, the Spanish biomass sector as a whole has been dissected. From the types of biomass resources that exist in Spain, ways of extracting and processing them, energy production technologies, its main energy uses and the implementation capacity of the sector in Spain. It has also examined the international, European and national energy context, and has thoroughly analyzed the support instruments that have contributed directly and indirectly to the development of the sector in Spain, so far. Furthermore, the thesis integrates the analysis of results obtained using two different methodologies also with different purposes. On the one hand, the environmental and socio-economic results of the analysis of input-output cycle life generated from the five biomass technologies most widely used in Spain, have been obtained. On the other hand, different projections of the implementation of the sector in the medium term, as energy scenarios with horizon 2035, have been obtained by the model TIMES-Spain, based on several energy and environmental objectives. The thesis also offers a series of conclusions and recommendations that could be relevant to the agents that constitute the value chain of the biomass sector itself and other stakeholders. As well as policy and support mechanisms for decision-makers, from both: The Central and Regional Governments, on the characteristics and advantages of certain forms of valorization, on the social and environmental effects that induce their use, and the ability of the biomass sector to contribute to certain policies beyond the purely energy ones. In any case, this thesis aims to contribute to decision making, suitable for both: Industry players and to public officials. In order to adopt measures to promote significant changes in the energy system that increase the proportion of renewable energy and, consequently, that contribute to mitigate the threat of climate change; not only today but in the coming years, especially for future generations.

Aprovechamiento térmico de residuos estériles de carbón para generación eléctrica mediante tecnologías de combustión y gasificación eficientes y con mínimo impacto ambiental

La presente tesis doctoral, “Aprovechamiento térmico de residuos estériles de carbón para generación eléctrica mediante tecnologías de combustión y gasificación eficientes y con mínimo impacto ambiental”, desarrolla la valorización energética de los residuos del carbón, estériles de carbón, producidos durante las etapas de extracción y lavado del carbón. El sistema energético se encuentra en una encrucijada, estamos asistiendo a un cambio en el paradigma energético y, en concreto, en el sector de la generación eléctrica. Se precipita un cambio en la generación y el consumo eléctricos. Una mayor concienciación por la salud está forzando la contención y eliminación de agentes contaminantes que se generan por la utilización de combustibles fósiles de la forma en la que se viene haciendo. Aumenta la preocupación por el cambio climático y por contener en 2°C el aumento de la temperatura de la Tierra para final de este siglo, circunstancia que está impulsando el desarrollo e implantación definitiva de tecnología de control y reducción de emisiones CO2. Generar electricidad de una manera sostenible se está convirtiendo en una obligación. Esto se materializa en generar electricidad respetando el medioambiente, de una forma eficiente en la utilización de los recursos naturales y a un coste competitivo, pensando en el desarrollo de la sociedad y en el beneficio de las personas. En la actualidad, el carbón es la principal fuente de energía utilizada para generar electricidad, y su empleo presenta la forma de energía más barata para mejorar el nivel de vida de cualquier grupo y sociedad. Además, se espera que el carbón siga presente en el mix de generación eléctrica, manteniendo una significativa presencia y extrayéndose en elevadas cantidades. Pero la producción de carbón lleva asociada la generación de un residuo, estéril, que se produce durante la extracción y el lavado del mineral de carbón. Durante décadas se ha estudiado la posibilidad de utilizar el estéril y actualmente se utiliza, en un limitado porcentaje, en la construcción de carreteras, terraplenes y rellenos, y en la producción de algunos materiales de construcción. Esta tesis doctoral aborda la valorización energética del estéril, y analiza el potencial aprovechamiento del residuo para generar electricidad, en una instalación que integre tecnología disponible para minimizar el impacto medioambiental. Además, persigue aprovechar el significativo contenido en azufre que presenta el estéril para producir ácido sulfúrico (H2SO4) como subproducto de la instalación, un compuesto químico muy demandado por la industria de los fertilizantes y con multitud de aplicaciones en otros mercados. Se ha realizado el análisis de caracterización del estéril, los parámetros significativos y los valores de referencia para su empleo como combustible, encontrándose que su empleo como combustible para generar electricidad es posible. Aunque en España se lleva extrayendo carbón desde principios del siglo XVIII, se ha evaluado para un período más reciente la disponibilidad del recurso en España y la normativa existente que condiciona su aplicación en el territorio nacional. Para el período evaluado, se ha calculado que podrían estar disponibles más de 68 millones de toneladas de estéril susceptibles de ser valorizados energéticamente. Una vez realizado el análisis de la tecnología disponible y que podría considerarse para emplear el estéril como combustible, se proponen cuatro configuraciones posibles de planta, tres de ellas basadas en un proceso de combustión y una de ellas en un proceso de gasificación. Tras evaluar las cuatro configuraciones por su interés tecnológico, innovador y económico, se desarrolla el análisis conceptual de una de ellas, basada en un proceso de combustión. La instalación propuesta tiene una capacidad de 65 MW y emplea como combustible una mezcla de carbón y estéril en relación 20/80 en peso. La instalación integra tecnología para eliminar en un 99,8% el SO2 presente en el gas de combustión y en más de un 99% las partículas generadas. La instalación incorpora una unidad de producción de H2SO4, capaz de producir 18,5 t/h de producto, y otra unidad de captura para retirar un 60% del CO2 presente en la corriente de gases de combustión, produciendo 48 tCO2/h. La potencia neta de la planta es 49,7 MW. Se ha calculado el coste de inversión de la instalación, y su cálculo resulta en un coste de inversión unitario de 3.685 €/kW. ABSTRACT The present doctoral thesis, “Thermal utilisation of waste coal for electricity generation by deployment of efficient combustion and gasification technologies with minimum environmental impact”, develops an innovative waste-to-energy concept of waste coals produced during coal mining and washing. The energy system is at a dilemma, we are witnessing a shift in the energy paradigm and specifically in the field of electricity generation. A change in the generation and electrical consumption is foreseen. An increased health consciousness is forcing the containment and elimination of pollutants that are generated by the use of fossil fuels in the way that is being done. Increasing concern about climate change and to contain the rise of global temperature by 2°C by the end of this century, is promoting the development and final implementation of technology to control and reduce the CO2 emission. Electricity generation in a sustainable manner is becoming an obligation. This concept materialised in generating electricity while protecting the environment and deployment of natural resources at a competitive cost, considering the development of society and people´s benefit. Currently, coal is the main source of energy employ to generate electricity, and its use represents the most cost competitive form of energy to increase the standard of living of any group or society. Moreover, coal will keep playing a key role in the global electricity generation mix, maintaining a significant presence and being extracting in large amounts. However, coal production implies the production of waste, termed waste coal or culm in Pennsylvania anthracite extraction, produced during coal mining and coal washing activities. During the last decades, the potential use of waste coal has been studied, and currently, in a limited amount, waste coal is used in roads construction, embankments and fillings, and to produce some construction materials. This doctoral thesis evaluates the waste to energy of waste coals and assesses its potential use to generate electricity, implementing available technology to minimise the environment impact. Additionally, it pursues the significant advantage that presents sulphur content in waste coal to produce sulphuric acid (H2SO4) as a byproduct of the waste-to-energy process, a chemical compound highly demanded by the fertiliser industry and many applications in other markets. It analyses the characteristics of waste coal, and assesses the significant parameters and reference values for its use as fuel, being its fuel use for electricity generation very possible. While mining coal is taking place in Spain since the 1700s, it has been evaluated for a more recent period the waste coal available in Spain and the existing legislation that affects its application and deploy to generate electricity in the country. For the evaluation period has been calculated that may be available more than 68 million tons of waste coal that can be waste-toenergy. The potential available technology to deploy waste coal as fuel has been evaluated and assessed. After considering this, the doctoral thesis proposes four innovative alternatives of facility configuration, three of them based on a combustion process and one in a gasification process. After evaluating the four configurations for its technological, innovative and economic interest, the conceptual analysis of one of alternatives, based on a combustion process, takes place. The proposed alternative facility developed has a capacity of 65 MW, using as fuel a mixture of coal and waste coal 80/20 by weight. The facility comprises technology to remove 99.8% SO2 present in the flue gas and more than 99% of the particles. The facility includes a unit capable of producing 18.5 t/h of H2SO4, and another capture facility, removing 60% of CO2 present in the flue gas stream, producing 48 tCO2/h. The net capacity of the power station is 49.7 MW. The facility unitary cost of investment is 3,685 €/kW.

Almacenamiento de energía térmica por calor latente en los edificios: bases para la optimización de aplicaciones pasivas, opacas y traslúcidas

La principal motivación para la elección del tema de la tesis es nuestra realidad energética y ambiental. Y más específicamente, la necesidad urgente de dar una respuesta a esta realidad desde el sector de la edificación. Por lo que, el trabajo parte de la búsqueda de soluciones pasivas que ayuden a la reducción del consumo energético y de las emisiones de C02 de los edificios, tanto nuevos como existentes. El objeto de estudio son aplicaciones innovadoras, basadas en el uso de materiales reactivos, con un efecto térmico de memoria bidireccional. La energía es un elemento imprescindible para el desarrollo. Sin embargo, el modelo energético predominante, basado principalmente en la utilización de combustibles de origen fósil, es uno de los importantes responsables del deterioro ambiental que sufre el planeta. Además, sus reservas son limitadas y están concentradas en unas pocas regiones del mundo, lo que genera problemas de dependencia, competitividad y de seguridad de suministro. Dado el gran potencial de ahorro energético del sector de la edificación, la Unión Europea en sus directivas enfatiza la necesidad de mejorar la eficiencia energética de los edificios. Añadiendo, además, la obligatoriedad de desarrollar edificios “energía casi nula”, cuyo prerrequisito es tener un muy alto rendimiento energético. En España, los edificios son responsables del 31% del consumo de energía primaria. La mayor parte de este consumo se relaciona a la utilización de sistemas activos de acondicionamiento. Una medida efectiva para reducir la demanda es mejorar la envolvente. Sin embargo, hay que buscar estrategias adicionales para aumentar aún más la eficiencia de los edificios nuevos y existentes. Para los climas de España, el uso de la inercia térmica ha probado ser una estrategia válida. Sin embargo, su funcionamiento está vinculado al peso y al volumen de los materiales utilizados. Esto limita sus posibilidades en la rehabilitación energética y en los nuevos edificios basados en la construcción ligera. Una alternativa es el uso de aplicaciones de almacenamiento térmico por calor latente, utilizando materiales de cambio de fase (PCM). Los PCM son sustancias con un muy alto calor de fusión, capaces de almacenar una gran cantidad de energía térmica sin requerir aumentos significativos de peso o volumen. Estas características los hacen idóneos para reducir el consumo relacionado con el acondicionamiento térmico, en edificios nuevos y existentes. En la parte preliminar de la investigación, se encontró que para lograr un aprovechamiento óptimo de las aplicaciones con PCM es necesario tener un conocimiento profundo de su funcionamiento y de las variables del sistema. De ahí que el objetivo principal de la presente tesis sea: establecer las bases para la optimizatión integral de las aplicaciones con almacenamiento de energía térmica por calor latente, identificando y validando sus variables más relevantes. La investigación consta de tres partes. La primera, documental, sistematizando y jerarquizando la información científica publicada; la segunda, numérica, basada en un análisis paramétrico de una aplicación con PCM, utilizando simulaciones térmicas; y la tercera, experimental, monitorizando el funcionamiento térmico y energético de diferentes aplicaciones con PCM en módulos a escala real. Los resultados brindan un más profundo entendimiento del funcionamiento de las aplicaciones evaluadas. Han permitido identificar sus variables relevantes, cuantificar su influencia, y determinar condiciones óptimas para su utilización así como situaciones en las que sería muy difícil justificar su uso. En el proceso, se realizó la caracterización térmica y energética de aplicaciones con PCM, tanto opacas como traslúcidas. Además, se ha encontrado que las aplicaciones con PCM son capaces de aumentar la eficiencia energética inclusive en recintos con diseños optimizados, demostrando ser una de las estrategias adecuadas para lograr el muy alto desempeño energético requerido en los edificios energía nula. ABSTRACT The main motivation for choosing the theme of the thesis is our energy and environmental reality. And more specifically, the urgent need to respond to this reality from the building sector. This is why, the work start with the search of passive solutions that help reduce energy consumption and C02 emissions of buildings, in both new and existing ones. The object of study is innovative applications based on the use of responsive materials, with bidirectional thermal memory. Energy is an essential element for development. However, the predominant energy model, based primarily on the use of fossil fuels, is one of the major responsible for the environmental deterioration of the planet, the cause of most of the CO2 emissions. Furthermore, reserves of fossil fuels are limited and are concentrated in a few regions of the world, which creates issues related to dependency, competitiveness, and security of supply. Given the large potential for energy savings in the building sector, the European Union in its directives emphasizes the need to improve energy efficiency in buildings. Also, adding the obligation to develop "nearly zero energy" buildings, whose first prerequisite is to achieve a very high energy efficiency. In Spain, buildings are responsible for 31% of primary energy consumption and most of this consumption is related to the used of HVAC systems. One of the most effective measures to reduce demand is to improve the envelope. However, it is necessary to look for additional strategies to further increase the efficiency of new and existing buildings. For the predominant climates in Spain, use of the thermal inertia may be a valid strategy. Nevertheless, its operation is linked to weight and volume of the materials used. This limits their possibilities in the existing buildings energy retrofitting and in the new buildings based on lightweight construction. An alternative is the use of latent heat thermal energy storage applications (LHTES), using phase change materials (PCM). PCM are substances with a high heat of fusion, capable of storing a large amount of thermal energy without requiring significant increases in weight or volume. These features make them ideal for reducing energy consumption associated with thermal conditioning in both new and existing buildings. In the preliminary part of the investigation, it was found that to get optimum utilization of the PCM applications is needed to have a deep understanding of its operation and, in particular, how the system variables affect its performance. Hence, the main objective of this thesis is: to establish the basis for the integral optimization of applications with latent heat thermal energy storage, identifying and validating the most relevant variables. The research comprises of three parts. The first, documentary, systematizing and prioritizing published scientific information. The second, numeric, based on a parametric analysis of an application PCM using thermal simulations. The third, experimental, monitoring the thermal and energy performance of different applications with PCM on real scale test cells. The results provide a complete understanding of the functioning of the evaluated LHTES application. They have allowed to identify their relevant variables, quantify their influence and determine optimum conditions for use as well as situations where it would be very difficult to justify its use. In the process, it was carried out the power and thermal characterization of various opaque and translucent PCM applications. Furthermore, it has been found that applications with PCM can increase the energy efficiency, even in buildings with optimized designs; proving to be one of the appropriate measures to achieve the high energy performance required in zero energy buildings.

On strategies for reducing greenhouse gas emissions

Equity is of fundamental concern in the quest for international cooperation to stabilize greenhouse gas concentrations by the reduction of emissions. By modeling the carbon cycle, we estimate the global CO2 emissions that would be required to stabilize the atmospheric concentration of CO2 at levels ranging from 450 to 1,000 ppm. These are compared, on both an absolute and a per-capita basis, to scenarios for emissions from the developed and developing worlds generated by socio-economic models under the assumption that actions to mitigate greenhouse gas emissions are not taken. Need and equity have provided strong arguments for developing countries to request that the developed world takes the lead in controlling its emissions, while permitting the developing countries in the meantime to use primarily fossil fuels for their development. Even with major and early control of CO2 emissions by the developed world, limiting concentration to 450 ppm implies that the developing world also would need to control its emissions within decades, given that we expect developing world emissions would otherwise double over this time. Scenarios leading to CO2 concentrations of 550 ppm exhibit a reduction of the developed world's per-capita emission by about 50% over the next 50 years. Even for the higher stabilization levels considered, the developing world would not be able to use fossil fuels for their development in the manner that the developed world has used them.

Produção de hidrogênio por fermentação por um novo isolado de Clostridium beijerinckii

O hidrogênio (H2) tem sido considerado uma fonte de energia limpa bastante promissora, pois sua combustão origina apenas moléculas de água, sendo uma alternativa ao uso de combustíveis fósseis. Entretanto, os métodos atuais de produção de H2 demandam matérias-primas finitas e uma grande quantidade de energia, tornando a sua obtenção não sustentável. Mais recentemente, a via fermentativa tem sido considerada para a produção de H2, utilizando como matérias-primas efluentes industriais, materiais lignocelulósicos e biomassa de algas, denominado de bio-hidrogênio de primeira, segunda e terceira geração, respectivamente. Neste trabalho foi isolada uma bactéria anaeróbia a partir de uma cultura mista (lodo) de um sistema de tratamento de vinhaça, após pré-tratamento do lodo a pH 3 por 12 horas. Este microrganismo foi identificado com 99% de similaridade como Clostridium beijerinckii com base na sequência do gene RNAr 16S denominado de C. beijerinckii Br21. A temperatura e o pH mais adequados para o crescimento e produção de H2 por esta cultura foi 35 °C e pH inicial 7,0. A bactéria possui a capacidade de utilizar ampla variedade de fontes de carbono para a produção de H2 por fermentação, especialmente, monossacarídeos resultantes da hidrólise de biomassa de algas, tais como glicose, galactose e manose. Foram realizados ensaios em batelada para a produção de H2 com a bactéria isolada empregando diferentes concentrações de glicose e galactose, visando a sua futura utilização em hidrolisados de alga. Os parâmetros cinéticos dos ensaios de fermentação estimados pelo modelo de Gompertz modificado, como a velocidade máxima de produção (Rm), a quantidade máxima de hidrogênio produzido (Hmáx) e o tempo necessário para o início da produção de hidrogênio (fase lag) para a glicose (15 g/L) foram de: 58,27 mL de H2/h, 57,68 mmol de H2 e 8,29 h, respectivamente. Para a galactose (15 g/L), a Rm, Hmáx e foram de 67,64 mL de H2/h, 47,61 mmol de H2 e 17,22 horas, respectivamente. O principal metabólito detectado ao final dos ensaios de fermentação, foi o ácido butírico, seguido pelo ácido acético e o etanol, tanto para os ensaios com glicose, como com galactose. C. beijerinckii é um candidato bastante promissor para a produção de H2 por fermentação a partir de glicose e galactose e, consequentemente, a partir de biomassa de algas como substratos.

Discursive constructions of social and environmental accounting in Brazil: the case of Petrobras.

In the 29 years following \"Our Common Future\" by the United Nations, there is considerable debate among governments, civil society, interest groups and business organisations about what constitutes sustainable development, which constitutes evidence for a contested discourse concerning sustainability. The purpose of this study is to understand this debate in the developing economic context of Brazil, and in particular, to understand and critique the social and environmental accounting [SEA] discursive constructions relating to the State-owned, Petrobras as well as to understand the Brazilian literature on SEA. The discourse theory [DT]-based analysis employs rhetorical redescription to analyse twenty-two reports from Petrobras from 2004-2013. I investigate the political notions by employing the methodological framework of the Logics of Critical Explanation [LCE]. LCE engenders five methodological steps: problematisation, retroduction, logics (social, political and fantasmatic), articulation and critique. The empirical discussion suggests that the hegemony of economic development operates to obfuscate, rhetorically, the development of sustainability, so as to maintain the core business of Petrobras conceived as capital accumulation. Equally, these articulations also illustrate how the constructions of SEA operate to serve the company\'s purpose with few (none) profound changes in integration of sustainability. The Brazilian literature on SEA sustains the status quo of neo-liberal market policies that operate to protect the dominant business case approach to maintain an agenda of wealth-creation in relation to social and environmental needs. The articulations of the case manifested in policies regarding, for example, corruption, which involved over-payments for contracts and unsustainable practices relating to the use of fossil fuels and demonstrated that there was antagonism between action and disclosure. The corruption scandal that emerged after SEA disclosures highlighted the rhetorical nature of disclosure when financial resources were subtracted from the company for political parties and engineering contractors hid facts through incomplete disclosures. The articulations of SEA misrepresent a broader context of the meanings associated with sustainability, which restricted the constructions of SEA to principally serve and represent the intention of the most powerful groups. The significance of SEA, then is narrowed to represent particular interests. The study argues for more critical studies as limited Brazilian literature concerning SEA kept a \'safe distance\' from substantively critiquing the constructions of SEA and its articulations in the Brazilian context. The literature review and the Petrobras\' case illustrate a variety of naming, instituting and articulatory practices that endeavour to maintain the current hegemony of development in an emerging economy, which allows Petrobras to continue to exercise significant profit at the expense of the social and environmental. The constructed idea of development in Petrobras\' discourses emphasises a rhetoric of wider development, but, in reality, these discourses were the antithesis of political, social and ethical developmental issues. These constructions aim to hide struggles between social inequalities and exploitation of natural resources and constitute excuses about a fanciful notion of rhetorical and hegemonic neo-liberal development. In summary, this thesis contributes to the prior literature in five ways: (i) the addition of DT to the analysis of SEA enhances the discussion of political elements such as hegemony, antagonism, logic of equivalence/difference, ideology and articulation; (ii) the analysis of an emerging economy such as Brazil incorporates a new perspective of the discussion of the discourses of SEA and development; (iii) this thesis includes a focus on rhetoric to discuss the maintenance of the status quo; (iv) the holistic structure of the LCE approach enlarges the understanding of the social, political and fantasmatic logics of SEA studies and; (v) this thesis combines an analysis of the literature and the case of Petrobras to characterise and critique the state of the Brazilian academy and its impacts and reflections on the significance of SEA. This thesis, therefore, argues for more critical studies in the Brazilian academy due to the persistence of idea of SEA and development that takes-for-granted deep exclusions and contradictions and provide little space for critiques.

Quantificação de biomassa e carbono da parte aérea em uma área de Mata Atlântica, na Serra da Cantareira, São Paulo

A atividade humana tem contribuído com as emissões de gases de efeito estufa (GEE) associadas, principalmente, com queima de combustíveis fósseis e mudanças no uso da terra. Assim, se faz necessário que sejam adotadas medidas visando o retardamento dos efeitos das mudanças climáticas. As florestas exercem papel essencial no balanço de carbono principalmente por funcionarem como sumidouros de CO2. Por outro lado, se desmatadas, promovem emissões e liberam parte do carbono estocado. A quantidade de biomassa florestal e o teor de carbono podem variar em função do tipo florestal, bem como de sua localização. Entretanto, fator importante diz respeito à confiabilidade dos dados mensurados neste tipo de pesquisa. A biomassa e o carbono da parte aérea podem ser determinados via método destrutivo, ou estimados via método não destrutivo. A construção do Rodoanel Mário Covas trecho norte e a supressão de uma área de Mata Atlântica possibilitou a realização de estudo de biomassa da parte aérea via método destrutivo. O objetivo deste trabalho foi estudar o tamanho e forma de parcelas, a intensidade amostral, quantificar a biomassa e o carbono na parte aérea, comparar métodos destrutivos e não destrutivos para a quantificação de biomassa e carbono na parte aérea, estudar a variação da densidade básica da madeira das espécies nas diferentes classes de DAP e grupos sucessionais e comparar as medidas de altura total e DAP obtidas a campo no inventário com as medidas coletadas após o corte. O tamanho mais conveniente de parcela foi 400 m 2, com forma retangular e dimensão de 10 x 40 m. A intensidade amostral variou entre 39 e 75 unidades amostrais. A biomassa da parte aérea obtida, via método destrutivo, foi de 188,3 Mg ha-1 e o carbono, 85,1 Mg ha-1. A biomassa estimada por equações alométricas da literatura foi subestimada, quando comparada ao valor real, obtido via método destrutivo. As menores classes de DAP apresentaram as maiores densidades básicas da madeira. A densidade básica foi 0,488 g cm-3 na média das espécies. A porcentagem de carbono contida nos troncos e galhos não diferiu entre as classes de DAP. O teor de carbono foi 45,41%, na média dos troncos e galhos. Espécies pioneiras acumularam maior quantidade de biomassa e carbono nos galhos e apresentaram maior densidade básica que as não pioneiras. A utilização dos dados coletados na fase de inventário e após o corte não afetaram os valores de biomassa estimados.

Impactos de regulações ambientais sobre o transporte de cargas no Brasil: uma análise para o transporte de soja

O aumento da concentração de gases de efeito estufa na atmosfera levou a uma preocupação de como se reduzir as emissões destes gases. Desta preocupação surgiram instrumentos de regulação a fim de reduzir ou controlar os níveis de poluição. Dentro deste contexto, esta pesquisa analisou o setor de transportes de cargas, com ênfase no transporte de soja. No Brasil, o setor de transportes é um dos principais responsáveis pelas emissões de gases de efeito estufa provenientes da queima de combustíveis fósseis. No setor de transportes, as emissões diferem entre os modais, sendo que as ferrovias e hidrovias poluem menos que as rodovias. Desta forma, simulou-se por meio de um modelo de programação linear se a adoção de medidas regulatórias sobre as emissões de CO2 traria uma alteração no uso das ferrovias e hidrovias. Uma das constatações, ao se utilizar o modelo de Minimização de Fluxo de Custo Mínimo para o transporte de soja em 2013, foi que a capacidade de embarque nos terminais ferroviários e hidroviários desempenha um papel fundamental na redução das emissões de CO2. Se não houver capacidade suficiente, a adoção de uma taxa pode não provocar a redução das emissões. No caso do sistema de compra e crédito de carbono, seria necessária a compra de créditos de carbono, numa situação em que a capacidade de embarque nos terminais intermodais seja limitada. Verificou-se, ainda, que melhorias na infraestrutura podem desempenhar um papel mitigador das emissões. Um aumento da capacidade dos terminais ferroviários e hidroviários existentes, bem como o aumento da capacidade dos portos, pode provocar a redução das emissões de CO2. Se os projetos de expansão das ferrovias e hidrovias desenvolvidos por órgãos governamentais saírem do papel, pode-se chegar a uma redução de pouco mais de 50% das emissões de CO2. Consideraram-se ainda quais seriam os efeitos do aumento do uso de biodiesel como combustível e percebeu-se que seria possível obter reduções tanto das emissões quanto do custo de transporte. Efeitos semelhantes foram encontrados quando se simulou um aumento da eficiência energética. Por fim, percebeu-se nesta pesquisa que a adoção de uma taxa não traria tantos benefícios, econômicos e ambientais, quanto a melhoria da infraestrutura logística do país.

Alternative Energy at a Steel Mill

More than ever alternative energy solutions are being discussed including potential legislative action. With the use of fossil fuels being the most abundant and most controversial sources of energy, new solutions must be found. This paper looks at the economic and technical feasibility of different types of alternative energy and cogeneration applications within a steel mill. This paper examines alternative energy systems. The systems examined include Solar systems, thermal electric materials, and an Organic Rankine Cycle cogeneration project. None of the projects has limiting technical feasibility issues however each of the projects face economically limiting factors. Taking into account tangible and non-tangible factors the solar system and Organic Rankine Cycle cogeneration project are recommended for further study and potential installation.

Sustainable Energy Plan for a Small Island Economy: St. Vincent & the Grenadines

This paper defines a sustainable energy plan to provide the basis for renewable energy initiatives that will increase energy security, reduce negative economic impacts and provide a cleaner environment. The hotel, agriculture, transportation, construction, utility, government and private sectors will play pivotal roles in achieving targets and will see significant gains. Government policies, educational campaigns and financial incentives will be required to facilitate and encourage renewable energy development and entrepreneurship. Utilization of solar energy, energy conservation measures and the use of efficient and alternative fuel vehicles by the commercial/industrial and private sectors will be crucial in meeting targets. The utility company will be charged with developing large scale renewable energy applications and with improving efficiency of the electrical system.

Retos actuales para la captura y almacenamiento de CO2

Las grandes emisiones de CO2 procedentes de la combustión de combustibles fósiles están provocando un calentamiento global en nuestro planeta. Estos problemas medioambientales están obligando a los diferentes gobiernos a buscar soluciones que permitan reducir esas emisiones y mitigar sus efectos adversos. Una de las soluciones más prometedoras consiste en la captura selectiva de CO2 en efluentes industriales mediante el uso de materiales adsorbentes porosos (zeolitas, carbón activado y materiales híbridos MOFs) que combinen una elevada capacidad de adsorción y una adecuada selectividad a CO2 frente al resto de gases del proceso industrial, además de una adecuada regeneración.

Análise do regime de produção distribuída fotovoltaica para autoconsumo

Tese de mestrado integrado em Engenharia da Energia e do Ambiente, apresentada à Universidade de Lisboa, através da Faculdade de Ciências, 2016

Impact of the Decarbonisation of the Energy System on Employment in Europe. CEPS Special Report No. 82, February 2014

This paper presents a methodology for calculating the potential impact of the new socio-ecological transition away from fossil fuels on employment in EU energy supply. The methodology is based on “employment factors” (i.e. labour intensities) of different energy technologies. These employment factors are applied to changing energy mixes as projected by the decarbonisation scenarios of the European Commission’s Energy Roadmap 2050. In particular, we analyse quantitative (number of jobs) and qualitative (qualification levels) impacts on employment in extraction and processing of primary (fossil) fuels and in the power sector for the years 2020, 2030 and 2050. The results show that the energy sector will provide not only more jobs as the new socio-ecological transition unfolds, but also jobs requiring higher-level qualifications when compared with the current energy sector.

The Potential Evolution of the European Energy System to 2020 and 2050. CEPS Working Document No. 392, 26 March 2014

This paper assesses the impact of decarbonisation of the energy sector on employment in Europe. Setting the stage for such an assessment, the paper provides an analysis of possible pathways to decarbonise Europe’s energy system, taking into account EU greenhouse gas emissions reduction targets for 2020 and 2050. It pays particular attention to various low-carbon technologies that could be deployed in different regions of the EU. It concludes that efficiency and renewables play a major role in any decarbonisation scenario and that the power sector is the main enabler for the transition to a low-carbon economy in Europe, despite rising electricity demand. The extent of the decline in the share of fossil fuels will largely depend on the existence of carbon capture and storage (CCS), which remains a major source of uncertainty.