Proteção da relação de emprego sob o prisma da dignidade da pessoa humana

This work aims to show that the protection of the employment relation is one of the determining factors to respect the principle of the human dignity. The goal is initially to show the devaluation of work from antiquity to the early twentieth century, when the constitutions began to standardize protective devices. This way, the consecration of the social labor rights in the Constitution of 1988 represents the culmination of the historical achievements. This work demonstrates that such rights can not be reduced or suppressed by political conveniences, once these rights are included in the list of immutable clauses. It is displayed that to achieve the fundamental right to work is not well advised to encourage the creation of jobs that maculates the worker s dignity. The outsourced work is, therefore, a classic example of the advancement of precarious forms of contemporary labor. It is inferred that the presence of various forms of harassment results in a degradation of working environment, bringing about dire consequences on professional and personal life of the worker. Thus, decent work must be the appropriate benchmark for the creation of new jobs. It is also shown that the flexibilization of the propaganda rights by certain pressure groups has as main goal to reduce or eliminate rights, based on fallacious data depicting an increase of competitiveness and jobs. In addition, the flexibility implies a growth of the precarization of the work - a reality felt by many workers subjected to such a situation due to the unemployment phenomenon whose origin is not in the protectionism of the norms. It is necessary to expand and structure the constitutionally legitimate institutions to monitor and curb the precarized work, as well as all practices that go against the dignity of the worker. It is also shown the loss of power of the sindicates in the last few years as a consequence of the pulverization workes and the capital attacks through the productive restructure whose outsourcings and privatizations are notorious examples

Análise macroscópica e histológica do emprego da poliuretana derivada do óleo de mamona (Ricinus communis) aplicada na tíbia de cães em fase de crescimento

OBJETIVO: Estudar o efeito da poliuretana de mamona aplicada ao osso de cães em crescimento. MÉTODOS: Foram utilizados 12 cães subdivididos aleatoriamente em 3 grupos, os quais receberam o implante de mamona na face medial proximal da tíbia, com análise macroscópica e histopatológica aos 30 (GIII), 60 (GII) e 90 (GI) dias. RESULTADOS: A poliuretana foi recoberta por uma cápsula conjuntiva fibrosa, não ocorrendo proliferação óssea ao seu redor. CONCLUSÃO: A poliuretana é biocompatível, comportando-se como espaçador biológico em cães. Nesta espécie não ocorre a osteointegração.

Emprego de escama de sardinha (Sardinella brasiliensis - STEIDACHNER, 1859), conservada em glicerina, em ceratoplastias lamelares experimentais em cães

Estudou-se experimentalmente a escama de sardinha (Sardinella brasiliensis) como substituto de córneas no reparo de ceratectomias superficiais em cães. Utilizaram-se 14 animais, machos e fêmeas, sem raça definida, com peso médio de 10 kg, considerados sadios. Analisaram-se, macro e microscopicamente, as córneas receptoras bem como o material implantado aos 1, 3, 7, 14, 30 e 60 dias de pós-operatório. As evidências clínicas para a enxertia lamelar mostraram fotofobia e blefarospasmo mais incidentes nos períodos iniciais e intermediários, com tendência à regressão nos tardios. Revelaram edema discreto e igualmente regressivo; neoformação vascular mais incidente nas fases intermediárias e pouco nas tardias. O estudo microscópico evidenciou quadro reacional compatível com padrão benigno a exemplo do que fora visto macroscopicamente. Ambos retrataram boa adesividade da prótese, epitélio e estroma neoformados, sob e sobrepostos a ela. A transparência das córneas receptoras, junto às zonas de enxertia, manteve-se por 14 dias. Para a enxertia interlamelar, observou-se quadro reacional pouco significativo. Para ambas as enxertias, não foram observados sinais de extrusão do material implantado. A escama de sardinha pode ser empregada para fins tectônicos, com bons resultados em ceratoplastias lamelares em cães.

Emprego formal na região nordeste brasileira: seus efeitos na inclusão social

This work aims to study the problem of the formal job in the Brazilian Northeast region and its effect in the social inclusion, taking for base the analysis of variables defined in the Atlas of Social Exclusion, which is based on the 2000 Brazilian Census, choosing the county as unit of analysis. As methodological options, an exploratory data analysis was performed, followed by multivariate statistical techniques, such as weighted multiple regression analysis, cluster analysis and exploratory analysis of spatial data. The results pointed out to low rates of formal job for the active age population as well as low indexes of social inclusion in the Northeast region of Brazil. A strong association of the formal job with the indicators of social inclusion under investigation, was evidenced (schooling, inequality, poverty, youth and income form government transfers), as well as a strong association of the formal job with the new index of social inclusion (IIS), modified from the IES. At the Federative Units, in which better levels of formal job had been found, good indexes of social inclusion are also observed. Highlights for the state of the Rio Grande do Norte, with the best conditions of life, and for the states of the Maranhão and Piauí, with the worst conditions. The situation of the Northeast region, facing the indicators under study, is very precarious, claiming for the necessity of emphasizing programs and governmental actions, specially directed to the raise of formal job levels of the region, reflecting, thus, in improvements on the income inequality, as well as in the social inclusion of the population of Northeastern natives.

O emprego juvenil no limiar do século XXI :estudo a partir da RAIS e dos programas de inserção de jovens no mercado de trabalho de Natal/RN

This study received the title THE JUVENILE EMPLOYMENT IN THE THRESHOLD OF THE XXI CENTURY: study starting from RAIS and of the programs of youths' insert in the labor market of Natal/RN . It presents as main objective to investigate, starting from the officials data of the Ministério do trabalho e emprego - MTE and of the federal and state government programs, the evolution of the formal employment for youths and the difficulties that leads the success of the returned initiatives the youths' insert in the formal market of work in Brazil and in Rio Grande do Norte, in the period from 2000 to 2004. To accomplish the research, it prioritizes the study of the evolution of the formal employment starting from the data of the MTE as form of diagnosing the formal market of the juvenile work. Search a descriptive way to identify the first results of the programs Primeiro Emprego- PPE (federal) and Primeira Chance - PPC (state), to interpret and to identify the existent gaps among the proposal initial of those programs and the first results obtained in the city of Natal. The research has character no-probability and it applies closed questionnaires for youths assisted by the programs. Were interviewed the local representatives of PPE and PPC, besides representatives of the organized civil society all through open structured interview, covering a total of 103 interviews. The results demonstrated that while PPC (state) obtained success inserting youngs, the PPE (federal) just got to insert 1,5% of the amount subsidized by the state program in Natal. That situation demonstrates a clear preference of the companies for PPC (state), in detriment of the federal program

A evolução do emprego formal industrial nas cidades médias do estado do Ceará (Juazeiro do Norte, Crato e Sobral) no período de 1990 a 2010

The work consists in a discussion of the evolution of formal employment in the industrial cities of Ceará state averages from 1990 to 2010, since this period was marked by important changes. It is emphasized that in order to achieve this aim, the present study was based on a survey of relevant literature on the subject, as well as the use of the Annual Report of Social Information (RAIS), published by the Ministry of Labour and Employment (MTE) and the Brazilian Institute of Geography and Statistics (IBGE). The central question to be considered in this study is how we evolved formal employment industry in medium-sized cities (Juazeiro do Norte, Crato and Sobral) of Ceará? The assumption that guides this work is that given the economic policies of the 1990 and 2000 these policies encouraged the relocation, thus implying significant growth in the formal manufacturing employment in these cities. Regarding the results obtained in the survey, it was found that the industrial sector of these cities, showed considerable dynamism in what refers to the expansion of establishments. When observed in percentage terms medium-sized cities (345.5%) had the highest growth in number of establishments in the 1990s with rates higher than the Northeast region (285.9%) and Brazil (167.5%). The highlight was the city of Juazeiro, with the highest concentration of micro and small footwear companies in the state. Regarding the number of formal jobs created in medium-sized cities, it went from 6.596 in 1990 to 41.660 million formal jobs in 2010, with a growth rate of 532%. The sector contributed most to employment generation was the footwear. Although the levels of minimum wages, the 1990 recorded the lowest levels. In the 2000, there were real gains in levels of minimum wages in all cities, however, it may be noted that over the decades there has been significant momentum. However, this momentum was not enough to prevent the end of the study period CMs-Ceará present low wages

Industrialização e emprego formal: uma análise para os municípios da região metropolitana do Cariri nos anos de 1990 e 2000

The Northeast has a record of fighting to reduce disparities. In late 1950, the state intervened through SUDENE, organizing and planning the promotion of development through industrialization. This study aims to identify the characteristics of the industrialization of the Northeast and evolution of formal employment in the metropolitan area of Cariri, located in the southern state of Ceará, in the case of the municipalities of Crato, Juazeiro do Norte and Barbalha (CRAJUBAR) in decades of 1990 and 2000. The assumption permeates the SUDENE with public policies to encourage the industry, causing profound changes in the cities studied. The results indicate that the Cariri since the 1960 has been benefiting the programs implemented by SUDENE. With the implementation of these programs, with in a set of circumstances based on local vocations and state policies, there was a spatial distribution industry, triggering a growth and development on the provision of formal jobs in the industrial sector

Reconfigurações industriais das regiões metropolitanas do Nordeste: uma análise a partir do emprego formal

Industrial development experienced by Brazil from the 1950s, changed the concentration of population in the country. The process of development of domestic industry, concentrated in urban areas, crowded growing portion of the population.The Southeast region during the first stage of industrialization driven by the state, with the implementation of Plan goals, captained the major industrial projects implemented in the period and became the main industrial center of the country.In the decade from 1960 to 1980 the state action was marked by numerous regional development projects, softening the industrial concentration and Brazilian investment redirected to the Northeast.The second National Development Plan implemented in the 1970s led to major investments Northeast.This period marked the widespread urban growth and institutionalization of the first metropolitan areas in Brazil.The change of this developmental process is altered with the fiscal and financial crisis of the state in the 1980s and 1990s and spending cuts aimed at national development, reorienting the economy to liberal policies of economic liberalization and reduction of activity in the economy.Industrial policy was relegated to local development plans from the 1990s to the federating units fitting the wide use of tax incentives, the "war tax" to the continued industrialization process.In this context of the national economy work seeks to analyze the industrial setting in the metropolitan areas of Fortaleza, Recife and Salvador between 1995 and 2010.Although the metropolitan areas of Fortaleza, Recife and Salvador are the main urban centers of the Northeast, responsible for the advancement of industrial development, reconfigurations occurred between 1995 and 2010 by changing the level of industrial specialization built by regional division of labor in these regions.The work will be carried out by the method of descriptive analysis of the literature review on regional and urban development.Constitute quantitative method as the secondary data analysis of formal employment from the Annual Social Information (RAIS) Ministry of Labour and Employment (MTE).Using data RAIS / MTE analyzes the industrial specialization index using the Locational Quotient (LQ).Thus, it is assumed as a parameter analysis QL> 1, when the region has become specialized in a particular sector or QL <1, when the region does not have expertise in industrial sector analyzed.The conclusion of study indicates that there was in these metropolitan areas maintained the same bias hub.Fiscal policies, the states, was not successful in diversifying the productive structure and the Northeast region itself.This result is demonstrated by the need and dependence on state investments in the region to promote development.Industrial policies of recent years have been positive to meet the objectives of employment generation, but there must be specific policies for better diversification of production, in addition to integrating the economy of the Northeast sector and regionally

Declínio dos citros: algo a ver com o sistema de produção de mudas cítricas?

Na atualidade, a citricultura paulista enfrenta sérios problemas com o surgimento de novas enfermidades limitantes ao processo produtivo. Uma das alternativas para prevenir essas enfermidades é, seguramente, a produção de mudas certificadas, com borbulhas e sementes de assegurada qualidade genética e sanitária, produzidas em containers ou sacos plásticos, sob fiscalização dos órgãos competentes, garantindo-se, assim, a sanidade das mesmas. No entanto, tem-se verificado que grande parte do processo operacional de produção de mudas cítricas foi parcialmente adaptado da produção de essências florestais (eucalipto), onde se insere, principalmente, o emprego de tubetes com comprimento de 12 cm. Tal prática desencadeia uma grave deformidade morfológica no sistema radical das mudas cítricas, reduzindo o seu potencial de crescimento, quando são plantadas a campo, em local definitivo. Como a principal causa desencadeadora do declínio dos citros parece ser o estresse hídrico, plantas oriundas desse sistema de produção de mudas, mostram-se muito mais vulneráveis ao estresse e, conseqüentemente, a esta anomalia. Como atualmente todas as mudas produzidas no Estado de São Paulo provêm desse sistema de produção, seguramente o declínio dos citros tenderá a ser, futuramente, muito mais freqüente e severo nos casos de combinações vulneráveis à sua ocorrência.

Emprego da microscopia eletrônica na avaliação pós-vacinal de epitélio traqueal de patos (Anas platyrhynchos) imunizados contra a doença de Newcastle

Avaliou-se o emprego da microscopia eletrônica de varredura no estudo da reação respiratória pós-vacinal em epitélio traqueal de patos (Anas platyrhynchos) imunizados contra a doença de Newcastle. Foram utilizadas 48 aves, distribuídas em quatro grupos: T1 - grupo de aves-controle (não vacinadas), T2 - grupo de aves vacinadas com a estirpe Ulster 2C, T3 - grupo de aves vacinadas com a estirpe B1 e T4 - grupo de aves vacinadas com a estirpe LaSota. Independente do grupo experimental, as aves não apresentaram sinais clínicos detectáveis de reação respiratória pós-vacinal. Ao microscópio eletrônico de varredura, observou-se que os animais vacinados com as estirpes B1 e LaSota desenvolveram descamação epitelial da traqueia, enquanto os vacinados com a estirpe Ulster 2C não, mostrando um epitélio traqueal íntegro, semelhante ao do grupo-controle. Os patos vacinados com a estirpe B1 mostraram evidências de regeneração epitelial da traqueia decorridos 21 dias pós-vacinação, o que não ocorreu com os vacinados com a amostra LaSota.

Contribuições da pesquisa operacional para gestão da produção e operações : uma análise exploratória da literatura

This research aims to investigate the evolution presented during three decades (1980, 1990 and 2000) of using the tools of Operations Research (OR) as a suport to decision making in Production Operation Management (POM). Hypothesis tests were made to verify the proportional growth of a given area over the decades to the detriment of the areas of facility layout, capacity planning, production scheduling and inventory management. Six journals were selected and from them more than 800 articles were used for classification and analysis in the grounds of review. It also discussed possible ways for future research and comparisons are made with other papers of literature review. As a result, it was found that areas of heuristics and simulation showed a greater quantity of contributions in all POM areas of this study

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developing the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. It s important to point out that, in spite of the loads being normally connected to the transformer s secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Dedução de Funções de Alívio para Priorização de Variantes de Chaveamento Adequadas à Eliminação de Sobrecargas

Eventually, violations of voltage limits at buses or admissible loadings of transmission lines and/or power transformers may occur by the power system operation. If violations are detected in the supervision process, corrective measures may be carried out in order to eliminate them or to reduce their intensity. Loading restriction is an extreme solution and should only be adopted as the last control action. Previous researches have shown that it is possible to control constraints in electrical systems by changing the network topology, using the technique named Corrective Switching, which requires no additional costs. In previous works, the proposed calculations for verifying the ability of a switching variant in eliminating an overload in a specific branch were based on network reduction or heuristic analysis. The purpose of this work is to develop analytical derivation of linear equations to estimate current changes in a specific branch (due to switching measures) by means of few calculations. For bus-bar coupling, derivations will be based on short-circuit theory and Relief Function methodology. For bus-bar splitting, a Relief Function will be derived based on a technique of equivalent circuit. Although systems of linear equations are used to substantiate deductions, its formal solution for each variant, in real time does not become necessary. A priority list of promising variants is then assigned for final check by an exact load flow calculation and a transient analysis using ATP Alternative Transient Program. At last, results obtained by simulation in networks with different features will be presented

Uso de técnicas de otimização baseadas em derivadas como suporte do planejamento operacional de redes de distribuição de energia elétrica

The usual programs for load flow calculation were in general developped aiming the simulation of electric energy transmission, subtransmission and distribution systems. However, the mathematical methods and algorithms used by the formulations were based, in majority, just on the characteristics of the transmittion systems, which were the main concern focus of engineers and researchers. Though, the physical characteristics of these systems are quite different from the distribution ones. In the transmission systems, the voltage levels are high and the lines are generally very long. These aspects contribute the capacitive and inductive effects that appear in the system to have a considerable influence in the values of the interest quantities, reason why they should be taken into consideration. Still in the transmission systems, the loads have a macro nature, as for example, cities, neiborhoods, or big industries. These loads are, generally, practically balanced, what reduces the necessity of utilization of three-phase methodology for the load flow calculation. Distribution systems, on the other hand, present different characteristics: the voltage levels are small in comparison to the transmission ones. This almost annul the capacitive effects of the lines. The loads are, in this case, transformers, in whose secondaries are connected small consumers, in a sort of times, mono-phase ones, so that the probability of finding an unbalanced circuit is high. This way, the utilization of three-phase methodologies assumes an important dimension. Besides, equipments like voltage regulators, that use simultaneously the concepts of phase and line voltage in their functioning, need a three-phase methodology, in order to allow the simulation of their real behavior. For the exposed reasons, initially was developped, in the scope of this work, a method for three-phase load flow calculation in order to simulate the steady-state behaviour of distribution systems. Aiming to achieve this goal, the Power Summation Algorithm was used, as a base for developping the three phase method. This algorithm was already widely tested and approved by researchers and engineers in the simulation of radial electric energy distribution systems, mainly for single-phase representation. By our formulation, lines are modeled in three-phase circuits, considering the magnetic coupling between the phases; but the earth effect is considered through the Carson reduction. Its important to point out that, in spite of the loads being normally connected to the transformers secondaries, was considered the hypothesis of existence of star or delta loads connected to the primary circuit. To perform the simulation of voltage regulators, a new model was utilized, allowing the simulation of various types of configurations, according to their real functioning. Finally, was considered the possibility of representation of switches with current measuring in various points of the feeder. The loads are adjusted during the iteractive process, in order to match the current in each switch, converging to the measured value specified by the input data. In a second stage of the work, sensibility parameters were derived taking as base the described load flow, with the objective of suporting further optimization processes. This parameters are found by calculating of the partial derivatives of a variable in respect to another, in general, voltages, losses and reactive powers. After describing the calculation of the sensibility parameters, the Gradient Method was presented, using these parameters to optimize an objective function, that will be defined for each type of study. The first one refers to the reduction of technical losses in a medium voltage feeder, through the installation of capacitor banks; the second one refers to the problem of correction of voltage profile, through the instalation of capacitor banks or voltage regulators. In case of the losses reduction will be considered, as objective function, the sum of the losses in all the parts of the system. To the correction of the voltage profile, the objective function will be the sum of the square voltage deviations in each node, in respect to the rated voltage. In the end of the work, results of application of the described methods in some feeders are presented, aiming to give insight about their performance and acuity

Análise operacional e econômica do processamento de madeira de Eucalitpo com Hypro em região montanhosa

O processo constante de avaliação técnica e econômica dos sistemas de colheita de madeira é intrínseco às empresas florestais, devido ao fato de corresponder a uma fase de suma importância que despende elevado investimento financeiro. No experimento deste trabalho, estudaram-se o rendimento operacional e custos operacionais e de produção do processador florestal Hypro. A análise técnica englobou estudos de tempos e movimentos pelo método de tempo contínuo. O rendimento operacional foi determinado através do volume, em metros cúbicos de madeira processada. A análise econômica incorporou os parâmetros do custo operacional, custo de processamento da madeira e rendimento energético. A análise dos dados evidenciou que o rendimento operacional por hora efetiva de trabalho foi de 38 árvores e, em metros cúbicos sem casca por hora efetiva de trabalho, de 11,68 m³ h-1, com custo de processamento de madeira sem casca de US$ 6.85 por metro cúbico.