Molecular simulation of gas adsorption equilibria in nanoporous materials

This work is divided into two distinct parts. The first part consists of the study of the metal organic framework UiO-66Zr, where the aim was to determine the force field that best describes the adsorption equilibrium properties of two different gases, methane and carbon dioxide. The other part of the work focuses on the study of the single wall carbon nanotube topology for ethane adsorption; the aim was to simplify as much as possible the solid-fluid force field model to increase the computational efficiency of the Monte Carlo simulations. The choice of both adsorbents relies on their potential use in adsorption processes, such as the capture and storage of carbon dioxide, natural gas storage, separation of components of biogas, and olefin/paraffin separations. The adsorption studies on the two porous materials were performed by molecular simulation using the grand canonical Monte Carlo (μ,V,T) method, over the temperature range of 298-343 K and pressure range 0.06-70 bar. The calibration curves of pressure and density as a function of chemical potential and temperature for the three adsorbates under study, were obtained Monte Carlo simulation in the canonical ensemble (N,V,T); polynomial fit and interpolation of the obtained data allowed to determine the pressure and gas density at any chemical potential. The adsorption equilibria of methane and carbon dioxide in UiO-66Zr were simulated and compared with the experimental data obtained by Jasmina H. Cavka et al. The results show that the best force field for both gases is a chargeless united-atom force field based on the TraPPE model. Using this validated force field it was possible to estimate the isosteric heats of adsorption and the Henry constants. In the Grand-Canonical Monte Carlo simulations of carbon nanotubes, we conclude that the fastest type of run is obtained with a force field that approximates the nanotube as a smooth cylinder; this approximation gives execution times that are 1.6 times faster than the typical atomistic runs.

Evaporation from porous building materials and its cooling potential

Evaporative cooling is a traditional strategy to improve summer comfort, which has gained renewed relevance in the context of the transition to a greener economy. Here, the potential for evaporative cooling of two common porous building materials, natural stone and ceramic brick, was evaluated. The work has relevance also to the protection of built heritage becauseevaporation underlies the problems of dampness and salt crystallization, which are so harmful and frequent in this heritage. It was observed that the drying rate of the materials is, in some cases, higher than the evaporation rate of a free water surface. Surface area measurements by a three-dimensional optical technique suggested, as probable cause of this behavior, that surface irregularity gives rise to a large effective surface of evaporation in the material. Surface temperature measurements by infrared were performed afterward during evaporation experiments outside during a hot summer day in Lisbon. Their results indicate that ordinary building materials can be very efficient evaporative media and, thus, may help in achieving higher energy efficiency while maintaining a simultaneous constructive or architectural function.

Visceral leishmaniasis in Rio de Janeiro, Brazil: eco-epidemiological aspects and control

From 1977 (index case) to 2006, 87 cases of visceral leishmaniasis were confirmed in the municipality of Rio de Janeiro, Brazil, in periurban areas on the continental and coastal slopes of the Pedra Branca massif and the continental slopes of the Gericinó massif. The majority (65.5%) of the patients were more than five years old, predominantly males (61.5%), but without any difference between the sexes below the age of 14 years. The overall fatality rate was 10.4%. Two cases of visceral leishmaniasis/human immunodeficiency virus coinfection were detected. Leishmania chagasi was isolated from human and canine cases. The associations between the presence of phlebotomines and human and canine migrations, disorderly occupation involving degradation of environmental preservation areas and poor socioeconomic conditions may have created a favorable setting for the establishment and propagation of the disease. Close epidemiological surveillance associated with traditional control measures and others (active case researches, land clearing and health education), reduced the incidence of human cases from 2.8 per 100,000 inhabitants in 1981 to less than 0.01 per 100,000 since 1997. The canine infection rates decreased from 4.6% in 1984 to 1.6% in 2008. Lutzomyia longipalpis was not detected in some locations where human and canine cases occurred. In the years 2007 and 2008, no new human cases were reported, but there is a persistent and worrisome residual canine seroprevalence.

Development of new membranes based on ionic liquid materials for gas separation

In the field of energy, natural gas is an essential bridge to a clean, low carbon, renewable energy era. However, natural gas processing and transportation regulation require the removal of contaminant compounds such as carbon dioxide (CO2). Regarding clean air, the increasing atmospheric concentrations of greenhouse gases, specifically CO2, is of particular concern. Therefore, new costeffective, high performance technologies for carbon capture have been researched and the design of materials with the ability to efficiently separate CO2 from other gases is of vital importance.(...)

The brushstroke and materials of Amadeo de Souza-Cardoso combined in an authentication tool

Nowadays, authentication studies for paintings require a multidisciplinary approach, based on the contribution of visual features analysis but also on characterizations of materials and techniques. Moreover, it is important that the assessment of the authorship of a painting is supported by technical studies of a selected number of original artworks that cover the entire career of an artist. This dissertation is concerned about the work of modernist painter Amadeo de Souza-Cardoso. It is divided in three parts. In the first part, we propose a tool based on image processing that combines information obtained by brushstroke and materials analysis. The resulting tool provides qualitative and quantitative evaluation of the authorship of the paintings; the quantitative element is particularly relevant, as it could be crucial in solving authorship controversies, such as judicial disputes. The brushstroke analysis was performed by combining two algorithms for feature detection, namely Gabor filter and Scale Invariant Feature Transform. Thanks to this combination (and to the use of the Bag-of-Features model), the proposed method shows an accuracy higher than 90% in distinguishing between images of Amadeo’s paintings and images of artworks by other contemporary artists. For the molecular analysis, we implemented a semi-automatic system that uses hyperspectral imaging and elemental analysis. The system provides as output an image that depicts the mapping of the pigments present, together with the areas made using materials not coherent with Amadeo’s palette, if any. This visual output is a simple and effective way of assessing the results of the system. The tool proposed based on the combination of brushstroke and molecular information was tested in twelve paintings obtaining promising results. The second part of the thesis presents a systematic study of four selected paintings made by Amadeo in 1917. Although untitled, three of these paintings are commonly known as BRUT, Entrada and Coty; they are considered as his most successful and genuine works. The materials and techniques of these artworks have never been studied before. The paintings were studied with a multi-analytical approach using micro-Energy Dispersive X-ray Fluorescence spectroscopy, micro-Infrared and Raman Spectroscopy, micro-Spectrofluorimetry and Scanning Electron Microscopy. The characterization of Amadeo’s materials and techniques used on his last paintings, as well as the investigation of some of the conservation problems that affect these paintings, is essential to enrich the knowledge on this artist. Moreover, the study of the materials in the four paintings reveals commonalities between the paintings BRUT and Entrada. This observation is supported also by the analysis of the elements present in a photograph of a collage (conserved at the Art Library of the Calouste Gulbenkian Foundation), the only remaining evidence of a supposed maquete of these paintings. The final part of the thesis describes the application of the image processing tools developed in the first part of the thesis on a set of case studies; this experience demonstrates the potential of the tool to support painting analysis and authentication studies. The brushstroke analysis was used as additional analysis on the evaluation process of four paintings attributed to Amadeo, and the system based on hyperspectral analysis was applied on the painting dated 1917. The case studies therefore serve as a bridge between the first two parts of the dissertation.

Eco-efficient earthen plasters: The influence of the addition of natural fibers.

Clayish earth-based mortars are been recognized, all over the world, as eco-efficient products for plastering. Apart from being a product with low embodied energy when compared to other types of plasters, their application on the interior surface of walls may give a strong contribution for the health and comfort of inhabitants. As part of an ongoing research regarding earth-based plasters this work assesses the influence of the addition of two types of natural fibres – oat straw and typha fiber-wool – on the characteristics of plastering mortars made with a clayish earth. Mechanical and physical characteristics were tested, showing that addition of these fibers contribute to decrease linear drying shrinkage and thermal conductivity, as well as promoting the adhesion strength of plaster to the substrate. The improvement of mechanical resistance reveal to be dependent on the type of fiber added while the hygroscopic capacity of the plaster is maintained regardless of the fiber additions.

Solução construtiva eco-eficiente de paredes monolíticas - contributo para a sua caracterização

Foi desenvolvida uma solução construtiva de paredes monolíticas com base em terra estabilizada com cal aérea, canas e fibras de canas. Apresenta-se um contributo para a otimização da solução construtiva através da caracterização de provetes do material utilizado, nos quais se variaram as proporções dos constituintes. Avaliou-se a massa volúmica no estado seco, a condutibilidade térmica, o comportamento face à água e o comportamento mecânico. Para além da menor massa volúmica e maior resistência térmica, comparativamente a outras soluções de paredes de terra, as resistências mecânicas podem ser particularmente controladas através da proporção (e tipo) de constituintes. Este tipo de solução é ainda particularmente interessante pela facilidade de execução, que permite a sua aplicação por mão-de-obra não especializada, podendo dessa forma promover a criação de emprego e resolver carências habitacionais.

Experimental characterization of an earth eco-efficient plastering mortar

Earthen plastering mortars are becoming recognized as highly eco-efficient. The assessment of their technical properties needs to be standardized but only the German standard DIN 18947 exists for the moment. An extended experimental campaign was developed in order to assess multiple properties of a ready-mixed earth plastering mortar and also to increase scientific knowledge of the influence of test procedures on those properties. The experimental campaign showed that some aspects related to the equipment, type of samples and sample preparation can be very important, while others seemed to have less influence on the results and the classification of mortars. It also showed that some complementary tests can easily be performed and considered together with the standardized ones, while others may need to be improved. The plaster satisfied the requirements of the existing German standard but, most importantly, it seemed adequate for application as rehabilitation plaster on historic and modern masonry buildings. Apart from their aesthetic aspect, the contribution of earthen plasters to eco-efficiency and particularly to hygrometric indoor comfort should be highlighted.

Eco-epidemiologic study of emerging fungi related to the work of babaçu coconut breakers in the State of Maranhão, Brazil

Introduction: There are more than 300,000 extractors using the babaçu coconut as a source of income in the States of Maranhão, Pará, Tocantins and Piauí, and this activity is associated with fungal infections. The objective of this study was to examine the occurrence of emergent fungi in the conjunctiva, nails and surface and subcutaneous injuries of female coconut breakers in Esperantinópolis, Maranhão. Additionally, soil samples and palm structures were collected. Methods: The obtained samples were cultured in Petri dishes containing potato-dextrose-agar and chloramphenicol. The etiological agent was confirmed by a direct mycological exam and growth in culture. Results: In total, 150 domiciles were visited, and samples were collected from 80 patients. From the ground, the most frequently isolated fungus was Aspergillus niger (53. 8%). the most frequently detected fungus in babaçu coconut was Aspergillus niger (66.7%). Conjunctival fungal growth occurred in 76.3% of the women. The ocular fungal microbiota consisted of filamentous fungi (80.6%), and yeasts were present in 19.4% of cases. Onychomycosis was diagnosed in 44% (11/25) of the women. Conclusions: The identification of the genera Neosartorya, Rhizopus and Curvularia in onychomycoses shows that emergent filamentous fungi can be isolated. Aspergillus sp., Penicillium sp. and Scedosporium sp. were the predominant genera found in the babaçu coconut. From ocular conjunctiva, Candida spp. were the most prevalent species isolated, and Fusarium sp. was present only in one woman. The nearly permanent exposure of coconut breakers to the external environment and to the soil is most likely the reason for the existence of a mycotic flora and fungal infections, varying according to the individual's practices and occupation.

Cellulose-based composites as functional conductive materials for printed electronics

In this work, cellulose-based electro and ionic conductive composites were developed for application in cellulose based printed electronics. Electroconductive inks were successfully formulated for screen-printing using carbon fibers (CFs) and multi-walled carbon nanotubes (MWCNTs) as conductive functional material and cellulose derivatives working as binder. The formulated inks were used to fabricate conductive flexible and disposable electrodes on paper-based substrates. Interesting results were obtained after 10 printing passes and drying at RT of the ink with 10 % wt. of pristine CFs and 3% wt. of carboxymethyl cellulose (CMC), exhibiting a resistivity of 1.03 Ωcm and a resolution of 400 μm. Also, a resistivity of 0.57 Ωcm was obtained for only one printing pass using an ink based on 0.5 % wt. MWCNTs and 3 % wt. CMC. It was also demonstrated that ionic conductive cellulose matrix hydrogel can be used in electrolyte-gated transistors (EGTs). The electrolytes revealed a double layer capacitance of 12.10 μFcm-2 and ionic conductivity of 3.56x10-7 Scm-1. EGTs with a planar configuration, using sputtered GIZO as semiconducting layer, reached an ON/OFF ratio of 3.47x105, a VON of 0.2 V and a charge carrier mobility of 2.32 cm2V-1s-1.

Historical reconstructions of raw materials based on a blue smalt coating applied to a seventeenth-century altarpiece

Based on samples cross-sections from the Main Altarpiece of the Coimbra Old Cathedral, where a blue coating performed in 1685 is observed (that was partly covered with a Prussian blue-containing overpaint), the raw materials present in this coating were reproduced and studied. Blue areas were painted with smalt in oil, according to the contract signed by Manoel da Costa Pereira in 1684 and the analysis by Le Gac in 2009. Based on these, three batches of cobalt-based glasses (S1, S2 and S3) were heated and melted in alumina crucibles in the kiln. S1 contained 6.03 % of cobalt oxide, S2 contained 2.10 %, with the addition of 1.49 % of magnesium oxide, and S3 contained 6.82 % of cobalt oxide, with the addition of 4.63% of antimony trioxide. These batches were ground mechanically with water and manually with different vehicles stated in recipes. The results were studied by means of OM, SEM-EDS, X-Ray CT, Colorimetry and Vickers HT. Different binders were also produced and analyzed by means of μ-FTIR, in order to perform their characterization and obtain Standard Spectra. Since anhydrite was identified in the ground layers, gypsum from Óbidos was also characterized by XRD. The main goal of this thesis was to study all the raw materials present in the 1685-blue coating, in order to allow the historically accurate reconstruction of the layers build-up in the next future.

Dangote Cement Plc building materials

Equity research report

Damage propagation in composite Materials meso-mechanical models

Composite materials have a complex behavior, which is difficult to predict under different types of loads. In the course of this dissertation a methodology was developed to predict failure and damage propagation of composite material specimens. This methodology uses finite element numerical models created with Ansys and Matlab softwares. The methodology is able to perform an incremental-iterative analysis, which increases, gradually, the load applied to the specimen. Several structural failure phenomena are considered, such as fiber and/or matrix failure, delamination or shear plasticity. Failure criteria based on element stresses were implemented and a procedure to reduce the stiffness of the failed elements was prepared. The material used in this dissertation consist of a spread tow carbon fabric with a 0°/90° arrangement and the main numerical model analyzed is a 26-plies specimen under compression loads. Numerical results were compared with the results of specimens tested experimentally, whose mechanical properties are unknown, knowing only the geometry of the specimen. The material properties of the numerical model were adjusted in the course of this dissertation, in order to find the lowest difference between the numerical and experimental results with an error lower than 5% (it was performed the numerical model identification based on the experimental results).

Terra nativa : a relação eco-humana na vida e na obra de Ferreira de Castro

A presente investigação visou contribuir para o estudo da permeabilidade entre Ciência e Arte, explorando, nomeadamente, o diálogo frutífero entre a área científica interdisciplinar da Ecologia Humana e a Literatura Portuguesa. Neste sentido, configura o que pode entender-se como um ensaio de dupla interdisciplinaridade. Recorreu-se a uma metodologia híbrida que integra métodos e fontes das ciências do ambiente e sociais e da análise literária, cujos graus de objetividade variam entre si, e que pode filiar-se na recente área dos “mixed methods”, cuja exploração se acentuou nas últimas duas décadas na Europa e nos Estados Unidos. Em concreto, pretendeu-se analisar a representação literária da Natureza e do vínculo de interdependência que o ser humano estabelece com ela na obra de Ferreira de Castro (1898-1974) ‒ um dos mais aclamados e traduzidos escritores portugueses do século XX, fundador do “romance social” português ‒ e perceber em que medida essa representação irradia da experiência de vida em variados ambientes geográficos, da personalidade e da ideologia do escritor. A tese consta de duas partes principais, traçando a primeira uma “Ecobiografia” do escritor, que averigua a sua relação e a sua conceção pessoal sobre a Natureza; e dedicando-se a segunda à ecocrítica de quatro textos de ficção com cenários em áreas rurais de Portugal continental, escritos entre 1928 e 1947: Emigrantes (1928), “O Natal em Ossela” (1933), Terra Fria (1934) e A Lã e a Neve (1947). Defende-se que, num tempo anterior ao movimento ecológico português, esses textos continham já um significativo teor eco-humano. Apresentam, por isso, um grande potencial de difusão do ambiente biofísico e das modalidades relacionais que o ser humano instituiu com a terra numa época, revelando-se um valioso contributo para a História Ambiental do território português. Esta função extra-artística projeta-se nas gerações leitoras do presente e do futuro e pode atuar em benefício da consciência ambiental e de cidadania neste século XXI. Razão por que é devido à obra castriana este novo lugar na Cultura portuguesa, mais além e mais amplo que a sua aplaudida dimensão literária.

Terra Nativa. A relação eco-humana na vida e na obra de Ferreira de Castro

A presente investigação teve o apoio financeiro da FCT, através de uma Bolsa de Doutoramento.