Implementation of a drive-by monitoring system for transport infrastructure utilising GNSS

Ageing and deterioration of infrastructure is a challenge facing transport authorities. In particular, there is a need for increased bridge monitoring in order to provide adequate maintenance, prioritise allocation of funds and guarantee acceptable levels of transport safety. Existing bridge structural health monitoring (SHM) techniques typically involve direct instrumentation of the bridge with sensors and equipment for the measurement of properties such as frequencies of vibration. These techniques are important as they can indicate the deterioration of the bridge condition. However, they can be labour intensive and expensive due to the requirement for on-site installations. In recent years, alternative low-cost indirect vibrationbased SHM approaches have been proposed which utilise the dynamic response of a vehicle to carry out “drive-by” pavement and/or bridge monitoring. The vehicle is fitted with sensors on its axles thus reducing the need for on-site installations. This paper investigates the use of low-cost sensors incorporating global navigation satellite systems (GNSS) for implementation of the drive-by system in practice, via field trials with an instrumented vehicle. The potential of smartphone technology to be harnessed for drive by monitoring is established, while smartphone GNSS tracking applications are found to compare favourably in terms of accuracy, cost and ease of use to professional GNSS devices.

A Framework for Spatial Road Safety Assessment: Case Study of Northern Ireland

Road traffic injuries are a major health issue worldwide. There are many factors that can
affect the levels of road traffic collisions which in turn increase the levels of people killed or
seriously injured. When road traffic collisions occur, observed facts are recorded in relation
to the incident. These facts are recorded as variable observations, and for this study,
variables and indicators are defined almost equivalently. There can be hundreds of different
indicators for the various collisions, as different countries face different road situations. This
makes it difficult to perform a road safety assessment, which can be applied globally. The
goal of this study is to select the most appropriate indicators and create a composite
indicator as a function of these indicators, which can be used as summary values, allowing
ease of comparisons between the countries/regions that have undergone a road safety
assessment. The composite indicator will then be used to assess the current situation in
Northern Ireland and provide scores for ranking policing in terms of overall road safety on
their road networks.

Spray Pyrolysed Tin Chalcogenide Thin Films: Optimization of optoelectronic properties of SnS for possible photovoltaic application as an absorber layer

In the early 19th century, industrial revolution was fuelled mainly by the development of machine based manufacturing and the increased use of coal. Later on, the focal point shifted to oil, thanks to the mass-production technology, ease of transport/storage and also the (less) environmental issues in comparison with the coal!! By the dawn of 21st century, due to the depletion of oil reserves and pollution resulting from heavy usage of oil the demand for clean energy was on the rising edge. This ever growing demand has propelled research on photovoltaics which has emerged successful and is currently being looked up to as the only solace for meeting our present day energy requirements. The proven PV technology on commercial scale is based on silicon but the recent boom in the demand for photovoltaic modules has in turn created a shortage in supply of silicon. Also the technology is still not accessible to common man. This has onset the research and development work on moderately efficient, eco-friendly and low cost photovoltaic devices (solar cells). Thin film photovoltaic modules have made a breakthrough entry in the PV market on these grounds. Thin films have the potential to revolutionize the present cost structure of solar cells by eliminating the use of the expensive silicon wafers that alone accounts for above 50% of total module manufacturing cost.

Validation of stress indicators for the assessment of animal welfare and prediction of pork meat quality variation at commercial level

Les procédures appliquées avant l’abattage des animaux influencent directement la qualité de la viande en modulant l’état physiologique des porcs; ainsi, l’augmentation de la température corporelle, les taux élevés de lactate sanguin et l’épuisement des réserves de glycogène entre autres, occasionnent la majorité des baisses de qualité. L’objectif de cette thèse était de valider des outils indicateurs de stress porcin pour les fermes et les abattoirs. Ceux-ci seraient appliqués à la surveillance du bien-être animal et à la prédiction de variation de qualité de la viande porcine au niveau commercial. Premierement, les résultats de la thèse ont permis de conclure qu’un des outils développés (analyseur portatif de lactate) mesure la variation du niveau de lactate sanguin associé à l’état physiologique des porcs dans la phase péri-mortem et aide à expliquer la variation de la qualité de la viande chez le porc à l’abattoir, en particulier dans les muscles du jambon. Deuxièmement, les résultats des audits du bien-être animal appliqués de la ferme à l’abattoir ont démontré que la qualité du système d’élevage à la ferme d’origine et les compétences du chauffeur de camion sont d’importants critères affectant la réponse comportementale des porcs à la manipulation avant l’abattage. Ces résultats ont également démontré que les conditions de logement à la ferme (la faible densité et l’enrichissement dans les enclos), le comportement des porcs en période pré-abattage (glissade), ainsi que les interventions du manipulateur (utilisation du bâton électrique) dans la zone d’étourdissement de l’abattoir affectent négativement la variation de la qualité de la viande. L’application des protocoles d’audits dans la filière porcine a également démontré que le respect des critères de bien-être animal fixés par un outil de vérification est primordiale et permet de contrôler les conditions de bien-être des porcs à chaque étape de la période pré-abattage, de produire une viande de qualité supérieure et de réduire les pertes. Les audits de bien-être animal sont donc un outil qui apporte des resultats très pertinents pour aider a éviter les variations de la qualité de la viande chez le porc. Troisièmement, la thermographie infrarouge s’est avéré être une technique prometteuse permettant d’évaluer la variation de température corporelle de l’animal pendant et après un stress physique, en particulier lorsque cette mesure est prise derrière les oreilles. En conclusion, les outils validés à travers cette thèse représentent des méthodologies non invasives et potentiellement complémentaires à d’autres approches d’évaluation de l’état physiologique et du bien-être animal par rapport au stress, permettant de réduire les pertes de qualité de viande (par exemple en utilisation conjointe avec le niveau de lactate sanguin et les indicateurs de stress comportemental, entre autres).

Digital accessibility challenges: the impact of locality, usability and technology

Abstract: It is estimated that 1 in 5 will, at some point in their lives, experience a long-term illness or disability that will impact their day to day lives. Access to digital information and technologies can be life changing and a necessity to fully participate in education, work and society. Specialist assistive technologies, such as screen readers, have been available for many years and are now built-into operating systems and devices. In addition, web accessibility standards have been compiled and published since the advent of the World Wide Web over two decades ago. However, internet use by people with disabilities continues to lag significantly behind those with no disability and use of assistive technologies remains lower than should be the case with tools often abandoned. In this seminar we will talk about our work to identify digital accessibility challenges; the barriers experienced by those with disabilities and how computer scientists can play a part in removing obstacles to access and ease of use. We will discuss some of our projects focussing on: • Development of assistive technologies for niche groups of users, • improving accessibility standards to cover a wider range of disabilities, • creating accessibility training resources for developers and stakeholders • embedding accessibility practice within development projects.

An Examination of Customers’ Attitudes about Table Top Technology in Full-Service Restaurants

This paper examines the influence of customer-facing technology in full-service restaurants. As a new addition to the service experience, tabletop devices offer the customer more control over the dining experience, and also increase customer participation in the service process, which has the potential to upset the traditional exchange between service providers and customers in restaurants. To examine how customers react to the use of tabletop devices, this study examines 1,343 point-of-sales transactions from 20 units of a full-service casual dining restaurant chain and matches customer in-restaurant transactions to their reactions to tabletop devices used during their meals. Results show that over 70% of the customers who used tabletop devices reported positive affect toward the device, with approximately 79% of customers reporting that the device improved their experience, citing convenience, ease of use, and credit card security as some benefits of using the technology. Approximately 80% of the customers who used the device reported that they would return to the restaurant because of the positive affect. The results also indicate that likeability of the device and tip percentage were positively and significantly connected to customer reports of the devices having a positive effect on experience and on desire to return. In addition, when customers reported increased return intentions, likeability of the device was higher regardless of reports of the device improving restaurant experience, showing that the introduction of tabletop devices had a positive effect for most—but not all—customers.

Diagnostic Tests and their Application in the Management of Soil- and Water-borne Oomycete Pathogen Species

Oomycete diseases cause significant losses across a broad range of crop and aquaculture commodities worldwide. These losses can be greatly reduced by disease management practices steered by accurate and early diagnoses of pathogen presence. Determinations of disease potential can help guide optimal crop rotation regimes, varietal selections, targeted control measures, harvest timings and crop post-harvest handling. Pathogen detection prior to infection can also reduce the incidence of disease epidemics. Classical methods for the isolation of oomycete pathogens are normally deployed only after disease symptom appearance. These processes are often-time consuming, relying on culturing the putative pathogen(s) and the availability of expert taxonomic skills for accurate identification; a situation that frequently results in either delayed application, or routine ‘blanket’ over-application of control measures. Increasing concerns about pesticides in the environment and the food chain, removal or restriction of their usage combined with rising costs have focussed interest in the development and improvement of disease management systems. To be effective, these require timely, accurate and preferably quantitatve diagnoses. A wide range of rapid diagnostic tools, from point of care immunodiagnostic kits to next generation nucleotide sequencing have potential application in oomycete disease management. Here we review currently-available as well as promising new technologies in the context of commercial agricultural production systems, considering the impacts of specific biotic and abiotic and other important factors such as speed and ease of access to information and cost effectiveness

Large-scale Roll Out of Online Prospective Measurement of Mood Symptoms in Affective Disorders

Background and Aims: True Colours is an online prospective mood-monitoring system developed at the University of Oxford to assist local patients and clinicians with monitoring course of illness in bipolar disorder. We report our initial experiences of using True Colours for research purposes in the Bipolar Disorder Research Network (BDRN; www.bdrn.org), a large research network of individuals with mood disorders spread throughout the UK. Methods: After initial piloting to ensure the practicality/acceptability of using True Colours within BDRN, we invited all BDRN participants (n = 7000) to participate in weekly True Colours ratings via three postal invitations sent over an 8-month period. Results: Following the three postal invitations, 915 individuals have so far expressed an interest in joining True Colours, and, of these, 662 (72.3%) have registered. 32 of those who registered for True Colours (5%) have so far asked to leave the system. Positive feedback from participants has focused around the ease of use and convenience of True Colours and potential clinical utility of the graphical representation of weekly mood scores. Conclusions: We have demonstrated that large-scale prospective mood monitoring for research purposes using a contemporary online approach is feasible. Challenges have included: (i) variation in participants’ technological ability; (ii) management of requests for clinical advice based on mood scores within a research setting; and, (iii) resources required to provide access and on-going support for participants using True Colours. We continue to expand recruitment to True Colours within BDRN, and plan to trial email invitations in the next phase of recruitment.

Evaluating the use of mobile collaborative augmented reality within field service networks: the case of Océ Italia – Canon Group

The adoption of Augmented Reality (AR) technologies can make the provision of field services to industrial equipment more effective. In these situations, the cost of deploying skilled technicians in geographically dispersed locations must be accurately traded off with the risks of not respecting the service level agreements with the customers. This paper, through the case study of a leading OEM in the production printing industry, presents the challenges that have to be faced in order to favour the adoption of a particular kind of AR named Mobile Collaborative Augmented Reality (MCAR). In particular, this study uses both qualitative and quantitative research. Firstly, a demonstration to show how MCAR can support field service was settled in order to achieve information about the use experience of the people involved. Then, the entire field force of Océ Italia – Canon Group was surveyed in order to investigate quantitatively the technicians’ perceptions about the usefulness and ease of use of MCAR, as well as their intentions to use this technology.

Corrosion protection of PVD and paint coatings for selective solar absorber surfaces

The selective solar absorber surface is a fundamental part of a solar thermal collector, as it is responsible for the solar radiation absorption and for reduction of radiation heat losses. The surface’s optical properties, the solar absorption (á) and the emittance (å), have great impact on the solar thermal collector efficiency. In this work, two coatings types were studied: coatings obtained by physical vapor deposition (PVDs) and coatings obtained by projection with different paints (PCs) on aluminum substrates. The most common industrial high performing solar selective absorbers are nowadays produced by vacuum deposition methods, showing some disadvantages, such as lower durability, lower resistance to corrosion, adhesion and scratch, higher cost and complex production techniques. Currently, spectrally selective paints are a potential alternative for absorbing surfaces in low temperature applications, with attractive features such as ease of processing, durability and commercial availability with low cost. Solar absorber surfaces were submitted to accelerated ageing tests, specified in ISO 22975-3. This standard is applicable to the evaluation of the long term behavior and service life of selective solar absorbers for solar collectors working under typical domestic hot water system conditions. The studied coatings have, in the case of PVDs solar absorptions between 0.93 and 0.96 and emittance between 0.07 and 0.10, and in the case of PCs, solar absorptions between 0.91 and 0.93 and emittance between 0.40 and 0.60. In addition to evaluating long term behavior based on artificial ageing tests, it is also important to know the degradation mechanism of different coatings that are currently in the market. Electrochemical impedance spectroscopy (EIS) allows for the assessment of mechanistic information concerning the degradation processes, providing quantitative data as output, which can easily relate to the kinetic parameters of the system. EIS measures were carried out on Gamry FAS2 Femostat coupled with a PCL4 Controller. Two electrolytes were used, 0.5 M NaCl and 0.5 M Na2SO4, and the surfaces were tested at different immersion times up to 4 weeks. The following types of specimens have been tested: Aluminium with/without surface treatment, 3 selective paint coatings (one with a poly(urethane) binder and two with silicone binders) and 2 PVD coatings. Based on the behaviour of the specimens throughout the 4 weeks of immersion, it is possible to conclude that the coating showing the best protective properties corresponds to the selective paint coating with a polyurethane resin followed by the other paint coatings, whereas both the PVD coatings do not confer any protection to the substrate, having a deleterious effect as compared to the untreated aluminium reference.

The Role of College Students' Perceptions of Effort Source on Self-Evaluations of Academic Ability

In the present studies I investigated whether college students’ perceptions of effort source influenced their perceptions of the relation between levels of their own effort and ability in mathematics. In Study 1 (N = 210), I found using hypothetical vignettes that perceptions of task-elicited effort (i.e., effort that arises due to the subjective difficulty or ease of the task) led to perceptions of an inverse relation between one’s effort and ability, and perceptions of self-initiated effort (i.e., effort that arises due to one’s own motivation or lack of motivation) led to perceptions of a positive relation between one’s effort and ability, consistent with my hypotheses and prior research. In Study 2 (N = 160), participants completed an academic task and I used open-ended questions to manipulate their perceptions of effort source. I found that participants in the task-elicited condition endorsed no overall relation between effort and ability, and participants in the self-initiated condition endorsed an overall inverse relation, which is inconsistent with my hypotheses and prior research. Possible explanations for the findings, as well as broader theoretical and educational implications are discussed.

Design of passive methane oxidation biosystems considering their response to the presence of capillary barrier effect

La construction des biosystèmes d’oxydation passive du méthane (BOPM) est une option économique et durable pour réduire les émissions de méthane des sites d’enfouissement de déchets et des effets subséquents du réchauffement climatique. Les BOPM sont constitués de deux couches principales: la couche d'oxydation du méthane (MOL) et la couche de distribution du gaz (GDL). L'oxydation du méthane se produit dans la MOL par les réactions biochimiques des bactéries méthanotrophes, et la GDL est construite sous la MOL pour intercepter et distribuer les émissions fugitives de biogaz à la base de la MOL. Fondamentalement, l'efficacité d'un BOPM est définie en fonction de l'efficacité d'oxydation du méthane dans la MOL. Par conséquent, il est indispensable de fournir des conditions adéquates pour les activités bactériennes des méthanotrophes. En plus des paramètres environnementaux, l'intensité et la distribution du biogaz influencent l'efficacité des BOPM, et ils peuvent rendre le matériau de la MOL - avec une grande capacité d'accueillir les activités bactériennes - inutilisables en termes d'oxydation du méthane sur place. L'effet de barrière capillaire le long de l'interface entre la GDL et la MOL peut provoquer des émissions localisées de méthane, due à la restriction ou la distribution non uniforme de l’écoulement ascendant du biogaz à la base de la MOL. L'objectif principal de cette étude est d'incorporer le comportement hydraulique non saturé des BOPM dans la conception des BOPM, afin d’assurer la facilité et la distribution adéquates de l'écoulement du biogaz à la base de la MOL. Les fonctions de perméabilité à l'air des matériaux utilisés pour construire la MOL des BOPM expérimentaux au site d’enfouissement des déchets de St Nicéphore (Québec, Canada), ainsi que celles d'autres de la littérature technique, ont été étudiés pour évaluer le comportement d'écoulement non saturé du gaz dans les matériaux et pour identifier le seuil de migration sans restriction du gaz. Ce dernier seuil a été introduit en tant que un paramètre de conception avec lequel le critère de conception recommandé ici, c’est à dire la longueur de la migration sans restriction de gaz (LMSG), a été défini. La LMSG est considérée comme la longueur le long de l'interface entre la GDL et la MOL où le biogaz peut migrer à travers la MOL sans restriction. En réalisant des simulations numériques avec SEEP/W, les effets de la pente de l'interface, des paramètres définissant la courbe de rétention d'eau, de la fonction de la conductivité hydraulique du matériau de la MOL sur la valeur de la LMSG (représentant la facilité d'écoulement du biogaz à l'interface) et de la distribution de l'humidité (et par conséquent celle du biogaz) ont été évalués. Selon les résultats des simulations, la conductivité hydraulique saturée et la distribution des tailles de pores du matériau de la MOL sont les paramètres les plus importants sur la distribution de l'humidité le long de l'interface. Ce dernier paramètre influe également sur la valeur du degré de saturation et donc la facilité du biogaz à la base de la MOL. La densité sèche du matériau de MOL est un autre paramètre qui contrôle la facilité d'écoulement ascendant du biogaz. Les limitations principales de la présente étude sont associées au nombre de matériaux de MOL testés et à l'incapacité de SEEP/W de considérer l'évapotranspiration. Toutefois, compte tenu des hypothèses raisonnables dans les simulations et en utilisant les données de la littérature, on a essayé de réduire ces limitations. En utilisant les résultats des expériences et des simulations numériques, des étapes et des considérations de conception pour la sélection du matériau de MOL et de la pente d'interface ont été proposées. En effet,le comportement hydraulique non saturé des matériaux serait intégré dans les nécessités de conception pour un BOPM efficace, de sorte que la capacité maximale possible d'oxydation du méthane du matériau de la MOL soit exploitée.

Raspberry Pi-pohjainen dataloggeri

Dataloggerit ovat tärkeitä mittaustekniikassa käytettäviä mittalaitteita, joiden tarkoituksena on kerätä talteen mittausdataa pitkiltä aikaväleiltä. Dataloggereita voidaan käyttää esimerkiksi teollista prosessia osana olevien toimilaitteiden tai kotitalouden energiajärjestelmän seurannassa. Teollisen luokan dataloggerit ovat yleensä hinnaltaan satojen tai tuhansien eurojen luokkaa. Työssä pyrittiin löytämään teollisen luokan laitteille halpa ja helppokäyttöinen vaihtoehto, joka on kuitenkin riittävän tehokas ja toimiva. Työssä suunniteltiin ja toteutettiin dataloggeri Raspberry Pi-alustalle ja testattiin sitä oikeaa teollista ympäristöä vastaavissa olosuhteissa. Kirjallisuudesta ja internet artikkeleista etsittiin samankaltaisia laite- ja ohjelmistoratkaisuja ja niitä käytettiin dataloggausjärjestelmän pohjana. Raspberry Pi-alustalle koodattiin yksinkertainen Python-kielinen data-loggausohjelma, joka käyttää Modbus-tiedonsiirtoprotokollaa. Testien perusteella voidaan todeta, että toteutettu dataloggeri on toimiva ja kykenee kaupallisten dataloggereiden tasoiseen mittaukseen ainakin pienillä näytteistystaajuuksilla. Toteutettu dataloggeri on myös huomattavasti kaupallisia dataloggereita halvempi. Helppokäyttöisyyden näkökulmasta dataloggerissa havaittiin puutteita, joita käydään läpi jatkokehitysideoiden muodossa.

Speech by Mr. Alban Sandi Bonilla, Dean, Faculty of Arts at the Inauguration of Professional Lecture "Managing Information in Specialized Areas in Costa Rican

Friends: Although we have not devoted special sessions to discuss the matter, the truth is that in some informal occasions we talked lightly about the relevance of the School of Library, Documentation and Information is at the Faculty of Arts. We have consistently defined our School Faculty as a humanist. The human reality in all its modes of symbolic production is the object of study that brings us together as an area of knowledge. A school is that, a major academic unit, which it brings together different disciplines deserve epistemological affinity for joint development. Cooperation, ease of interdisciplinary association are elements that justify the existence of the faculties. And our conversations, I insist, casual and light, have led us to establish two positions may seem superficially divergent, but are not. The Library mates look as techniques themselves, and feel that can be placed almost anywhere Faculty, and at first glance does not explain its presence in a humanities faculty. Let me turn away from this self-image.

Improvement of the oral praziquantel anthelmintic effect by cyclodextrin complexation

Schistosomiasis is a parasitic disease which kills a half million people per year, a I I over the world. Praziquantel (PZQ) is the drug-of-choice for schistosomiasis because of its effectiveness, ease of administration, and low cost. However, poor solubility restricts its delivery, especially via the oral route. In this study, we describe beta-cyclodextrin (beta-CD) complexation as an alternative to improve the PZQ bioavailability. Physicochemical analysis were performed to characterize the inclusion complex formed between PZQ and beta-CD. Differential scanning calorimetry (DSC) thermograms and morphological analysis using scanning electronic microscopy (SEM) gave evidences of the complex formation. Diffusion NMR experiments allowed determination of the fraction of PZQ bound to beta-CD (37%) and the association constant (941 +/- 47 M(-1)). The in vivo evaluation of the complexation on the effect of PZQ was performed on mice infected with Schistosoma mansoni (BH strain); after 15 days of treatment with the PZQ:beta-CD complex the efficacy, evaluated by the number of remaining alive worms, was 99%, against 59% elicited by plain PZQ.