Estimation of lung cancer diagnosis and treatment costs based on a patient-level analysis in Catalonia (Spain)

Background: Assessing of the costs of treating disease is necessary to demonstrate cost-effectiveness and to estimate the budget impact of new interventions and therapeutic innovations. However, there are few comprehensive studies on resource use and costs associated with lung cancer patients in clinical practice in Spain or internationally. The aim of this paper was to assess the hospital cost associated with lung cancer diagnosis and treatment by histology, type of cost and stage at diagnosis in the Spanish National Health Service. Methods: A retrospective, descriptive analysis on resource use and a direct medical cost analysis were performed. Resource utilisation data were collected by means of patient files from nine teaching hospitals. From a hospital budget impact perspective, the aggregate and mean costs per patient were calculated over the first three years following diagnosis or up to death. Both aggregate and mean costs per patient were analysed by histology, stage at diagnosis and cost type. Results: A total of 232 cases of lung cancer were analysed, of which 74.1% corresponded to non-small cell lung cancer (NSCLC) and 11.2% to small cell lung cancer (SCLC); 14.7% had no cytohistologic confirmation. The mean cost per patient in NSCLC ranged from 13,218 Euros in Stage III to 16,120 Euros in Stage II. The main cost components were chemotherapy (29.5%) and surgery (22.8%). Advanced disease stages were associated with a decrease in the relative weight of surgical and inpatient care costs but an increase in chemotherapy costs. In SCLC patients, the mean cost per patient was 15,418 Euros for limited disease and 12,482 Euros for extensive disease. The main cost components were chemotherapy (36.1%) and other inpatient costs (28.7%). In both groups, the Kruskall-Wallis test did not show statistically significant differences in mean cost per patient between stages. Conclusions: This study provides the costs of lung cancer treatment based on patient file reviews, with chemotherapy and surgery accounting for the major components of costs. This cost analysis is a baseline study that will provide a useful source of information for future studies on cost-effectiveness and on the budget impact of different therapeutic innovations in Spain.

A pH optode based on thymol blue: application to determination of CO2 using flow injection analysis system

An optode based on thymol blue (TB), an acid-based indicator, has been constructed and evaluated as a detector in FIA system for CO2 determination. The dye was chemically immobilised on the surface of a bifurcated glass optical fibre bundle, using silanisation in organic media. In FIA system, hydrogen carbonate or carbonate samples are injected in a buffer carrier solution, and then are mixed with phosphoric acid solution to generate CO2, which diffuses through a PTFE membrane, in order to be collected in an acceptor carrier fluid, pumped towards to detection cell, in which the optode was adapted. The proposed system presents two linear response ranges, from 1.0 x 10-3 to 1.0 x 10-2 mol l-1, and from 2.0 x 10-2 to 0.10 mol l-1. The sampling frequency was 11 sample h-1, with good repeatability (R.S.D < 4 %, n = 10). In flow conditions the optode lifetime was 170 h. The system was applied in the analysis of commercial mineral water and the results obtained in the hydrogen carbonate determination did not differ significantly from those obtained by potentiometry, at a confidence level of 95 %.

On convergence of transforms based on parabolic scaling

This thesis studies properties of transforms based on parabolic scaling, like Curvelet-, Contourlet-, Shearlet- and Hart-Smith-transform. Essentially, two di erent questions are considered: How these transforms can characterize H older regularity and how non-linear approximation of a piecewise smooth function converges. In study of Hölder regularities, several theorems that relate regularity of a function f : R2 → R to decay properties of its transform are presented. Of particular interest is the case where a function has lower regularity along some line segment than elsewhere. Theorems that give estimates for direction and location of this line, and regularity of the function are presented. Numerical demonstrations suggest also that similar theorems would hold for more general shape of segment of low regularity. Theorems related to uniform and pointwise Hölder regularity are presented as well. Although none of the theorems presented give full characterization of regularity, the su cient and necessary conditions are very similar. Another theme of the thesis is the study of convergence of non-linear M ─term approximation of functions that have discontinuous on some curves and otherwise are smooth. With particular smoothness assumptions, it is well known that squared L2 approximation error is O(M-2(logM)3) for curvelet, shearlet or contourlet bases. Here it is shown that assuming higher smoothness properties, the log-factor can be removed, even if the function still is discontinuous.

Warning system based on theoretical-experimental study of dispersion of soluble pollutants in rivers

Information about capacity of transport and dispersion of soluble pollutants in natural streams are important in the management of water resources, especially in planning preventive measures to minimize the problems caused by accidental or intentional waste, in public health and economic activities that depend on the use of water. Considering this importance, this study aimed to develop a warning system for rivers, based on experimental techniques using tracers and analytical equations of one-dimensional transport of soluble pollutants conservative, to subsidizing the decision-making in the management of water resources. The system was development in JAVA programming language and MySQL database can predict the travel time of pollutants clouds from a point of eviction and graphically displays the temporal distribution of concentrations of passage clouds, in a particular location, downstream from the point of its launch.

Climate risk in maize crop in the northeastern of Brazil based on climate change scenarios

This study evaluates the impacts of climate change on the agricultural zoning of climatic risk in maize crop cultivated in the Northeastern of Brazil, based on the Intergovernmental Panel on Climate Change (IPCC) reports. The water balance model, combined with geospatial technologies, was used to identify areas of the study region where the crops could suffer yield restrictions due to climate change. The data used in the study were the time series of rainfall with at least 30 years of daily data, crop coefficients, potential evapotranspiration and duration of the crop cycle. The scenarios of the increasing of air temperature used in the simulations were of 1.5ºC, 3ºC and 5ºC. The sowing date of maize crop from January to March appears to be less affected by warming scenarios than the sowing in November and December or April and May.

Simulation of structural stress history based on dynamic analysis

Modern machine structures are often fabricated by welding. From a fatigue point of view, the structural details and especially, the welded details are the most prone to fatigue damage and failure. Design against fatigue requires information on the fatigue resistance of a structure’s critical details and the stress loads that act on each detail. Even though, dynamic simulation of flexible bodies is already current method for analyzing structures, obtaining the stress history of a structural detail during dynamic simulation is a challenging task; especially when the detail has a complex geometry. In particular, analyzing the stress history of every structural detail within a single finite element model can be overwhelming since the amount of nodal degrees of freedom needed in the model may require an impractical amount of computational effort. The purpose of computer simulation is to reduce amount of prototypes and speed up the product development process. Also, to take operator influence into account, real time models, i.e. simplified and computationally efficient models are required. This in turn, requires stress computation to be efficient if it will be performed during dynamic simulation. The research looks back at the theoretical background of multibody dynamic simulation and finite element method to find suitable parts to form a new approach for efficient stress calculation. This study proposes that, the problem of stress calculation during dynamic simulation can be greatly simplified by using a combination of floating frame of reference formulation with modal superposition and a sub-modeling approach. In practice, the proposed approach can be used to efficiently generate the relevant fatigue assessment stress history for a structural detail during or after dynamic simulation. In this work numerical examples are presented to demonstrate the proposed approach in practice. The results show that approach is applicable and can be used as proposed.

Power cycling lifetime estimation of IGBT power modules based on chip temperature modeling

In this doctoral thesis, methods to estimate the expected power cycling life of power semiconductor modules based on chip temperature modeling are developed. Frequency converters operate under dynamic loads in most electric drives. The varying loads cause thermal expansion and contraction, which stresses the internal boundaries between the material layers in the power module. Eventually, the stress wears out the semiconductor modules. The wear-out cannot be detected by traditional temperature or current measurements inside the frequency converter. Therefore, it is important to develop a method to predict the end of the converter lifetime. The thesis concentrates on power-cycling-related failures of insulated gate bipolar transistors. Two types of power modules are discussed: a direct bonded copper (DBC) sandwich structure with and without a baseplate. Most common failure mechanisms are reviewed, and methods to improve the power cycling lifetime of the power modules are presented. Power cycling curves are determined for a module with a lead-free solder by accelerated power cycling tests. A lifetime model is selected and the parameters are updated based on the power cycling test results. According to the measurements, the factor of improvement in the power cycling lifetime of modern IGBT power modules is greater than 10 during the last decade. Also, it is noticed that a 10 C increase in the chip temperature cycle amplitude decreases the lifetime by 40%. A thermal model for the chip temperature estimation is developed. The model is based on power loss estimation of the chip from the output current of the frequency converter. The model is verified with a purpose-built test equipment, which allows simultaneous measurement and simulation of the chip temperature with an arbitrary load waveform. The measurement system is shown to be convenient for studying the thermal behavior of the chip. It is found that the thermal model has a 5 C accuracy in the temperature estimation. The temperature cycles that the power semiconductor chip has experienced are counted by the rainflow algorithm. The counted cycles are compared with the experimentally verified power cycling curves to estimate the life consumption based on the mission profile of the drive. The methods are validated by the lifetime estimation of a power module in a direct-driven wind turbine. The estimated lifetime of the IGBT power module in a direct-driven wind turbine is 15 000 years, if the turbine is located in south-eastern Finland.

Genetic grouping of avian infectious bronchitis virus isolated in Brazil based on RT-PCR/RFLP analysis of the S1 gene

Twelve Brazilian isolates and one reference vaccine strain of avian infectious bronchitis virus (IBV) were propagated in embryonating chicken eggs. The entire S1 glycoprotein gene of these viruses was analysed by reverse-transcriptase-polymerase chain reaction and restriction fragment length polymorphism (RT-PCR-RFLP), using the restriction enzymes HaeIII, XcmI and BstyI. The RFLP patterns led to the classification of these isolates into five distinct genotypes: A, B, C, D and Massachusetts. Five of twelve isolates were grouped in Massachusetts genotype and the remaining seven viruses were classified into four distinct genotypes: A (2), B (2), C (2) or D (1). Such genotyping classification agreed with previous immunological analysis for most of these viruses, highlighting the occurrence of a relevant variability among the IBV strains that are circulating in Brazilian commercial poultry flocks.

Effects of weed "Reestablishment" after hoeing on corn yields

Some growers and researchers sustain the idea that regrowth or root setting of some weeds may occur after hoeing, with detrimental effects over corn. The objective of this study was to evaluate the effects of weed removal from the field, removal after each hoeing, and corn intercropped with gliricidia on weed control and corn yield values. The experimental design consisted of blocks with split-plots and six replicates. Cultivars AG 1051 and BM 2022, planted in the plots, were submitted to the following treatments: no hoeing, two hoeings (at 20 and 40 days after planting), and intercropped with gliricidia. The hoed plots were either submitted to weed removal after the first, second, or both hoeings, or remained without weed removal. In the intercropped treatment, gliricidia was sown by broadcasting at corn planting between the corn rows, at a density of 15 seeds m-2. Twenty-five weed species occurred in the experiment; the most frequent was Digitaria sanguinalis (family Poaceae). The weed control methods tested had similar effects on the cultivars, which were not different from one another with respect to the evaluated traits, except for one-hundred-kernel weight, with cultivar AG 1051 being superior. Weed removal did not influence green corn yield or grain yield. However, the number of kernels/ear was higher in plots where weeds were removed in relation to plots without weed removal, suggesting that weed removal might be beneficial to corn. Besides, a higher dry matter weight was obtained for the above-ground part of weeds removed from the field after the first and second hoeings than the weight of weeds removed after the second hoeing only which, in turn, was higher than the weight of weeds removed after the first hoeing only. Green ear yield, grain yield, and dry matter of the above-ground part of the weeds did not show differences in hoed plots and were superior to the non-weeded plots and the intercropped plots, which were not different from each other; therefore, intercropping with gliricidia did not improve corn yield values.

A contribution to the phytogeography of Brazilian campos: an analysis based on Poaceae

Twenty areas from eight Brazilian states were compared according to a list of 224 species of Poaceae. In order to determinate affinity patterns between the areas, a binary matrix was submitted to cluster and ordination analysis. The patterns found were then faced to climate and geographic position. The scores corresponding to the areas obtained from the cluster analysis showed a strong correlation to temperature. The scores corresponding to the species suggest a gradient that associates distribution patterns to the photosynthetic pathway (C3 or C4). The current results suggest that the traditional classification of the Southern American grasslands might require some modification in order to be broadly applicable in the Brazilian context.

Virtual Testing of Active Magnetic Bearing Systems based on Design Guidelines given by the Standards

Active Magnetic Bearings offer many advantages that have brought new applications to the industry. However, similarly to all new technology, active magnetic bearings also have downsides and one of those is the low standardization level. This thesis is studying mainly the ISO 14839 standard and more specifically the system verification methods. These verifying methods are conducted using a practical test with an existing active magnetic bearing system. The system is simulated with Matlab using rotor-bearing dynamics toolbox, but this study does not include the exact simulation code or a direct algebra calculation. However, this study provides the proof that standardized simulation methods can be applied in practical problems.

Detection of renal dysfunction based on serum creatinine levels in a Brazilian community: the Bambuí Health and Ageing Study

There are few population-based studies of renal dysfunction and none conducted in developing countries. In the present study the prevalence and predictors of elevated serum creatinine levels (SCr > or = 1.3 mg/dl for men and 1.1 mg/dl for women) were determined among Brazilian adults (18-59 years) and older adults (>60 years). Participants included all older adults (N = 1742) and a probabilistic sample of adults (N = 818) from Bambuí town, MG, Southeast Brazil. Predictors were investigated using multiple logistic regression. Mean SCr levels were 0.77 ± 0.15 mg/dl for adults, 1.02 ± 0.39 mg/dl for older men, and 0.81 ± 0.17 mg/dl for older women. Because there were only 4 cases (0.48%) with elevated SCr levels among adults, the analysis of elevated SCr levels was restricted to older adults. The overall prevalence of elevated SCr levels among the elderly was 5.09% (76/1494). The prevalence of hypercreatinemia increased significantly with age (chi² = 26.17, P = 0.000), being higher for older men (8.19%) than for older women (5.29%, chi² = 5.00, P = 0.02). Elevated SCr levels were associated with age 70-79 years (odds ratio [OR] = 2.25, 95% confidence interval [CI]: 1.15-4.42), hypertension (OR = 3.04, 95% CI: 1.34-6.92), use of antihypertensive drugs (OR = 2.46, 95% CI: 1.26-4.82), chest pain (OR = 3.37, 95% CI: 1.31-8.74), and claudication (OR = 3.43, 95% CI: 1.30-9.09) among men, and with age >80 years (OR = 4.88, 95% CI: 2.24-10.65), use of antihypertensive drugs (OR = 4.06, 95% CI: 1.67-9.86), physical inactivity (OR = 2.11, 95% CI: 1.11-4.02) and myocardial infarction (OR = 3.89, 95% CI: 1.58-9.62) among women. The prevalence of renal dysfunction observed was much lower than that reported in other population-based studies, but predictors were similar. New investigations are needed to confirm the variability in prevalence and associated factors of renal dysfunction among populations.

Selection of patients for myocardial perfusion scintigraphy based on fuzzy sets theory applied to clinical-epidemiological data and treadmill test results

Coronary artery disease (CAD) is a worldwide leading cause of death. The standard method for evaluating critical partial occlusions is coronary arteriography, a catheterization technique which is invasive, time consuming, and costly. There are noninvasive approaches for the early detection of CAD. The basis for the noninvasive diagnosis of CAD has been laid in a sequential analysis of the risk factors, and the results of the treadmill test and myocardial perfusion scintigraphy (MPS). Many investigators have demonstrated that the diagnostic applications of MPS are appropriate for patients who have an intermediate likelihood of disease. Although this information is useful, it is only partially utilized in clinical practice due to the difficulty to properly classify the patients. Since the seminal work of Lotfi Zadeh, fuzzy logic has been applied in numerous areas. In the present study, we proposed and tested a model to select patients for MPS based on fuzzy sets theory. A group of 1053 patients was used to develop the model and another group of 1045 patients was used to test it. Receiver operating characteristic curves were used to compare the performance of the fuzzy model against expert physician opinions, and showed that the performance of the fuzzy model was equal or superior to that of the physicians. Therefore, we conclude that the fuzzy model could be a useful tool to assist the general practitioner in the selection of patients for MPS.

New nitric oxide donors based on ruthenium complexes

Nitric oxide (NO) donors produce NO-related activity when applied to biological systems. Among its diverse functions, NO has been implicated in vascular smooth muscle relaxation. Despite the great importance of NO in biological systems, its pharmacological and physiological studies have been limited due to its high reactivity and short half-life. In this review we will focus on our recent investigations of nitrosyl ruthenium complexes as NO-delivery agents and their effects on vascular smooth muscle cell relaxation. The high affinity of ruthenium for NO is a marked feature of its chemistry. The main signaling pathway responsible for the vascular relaxation induced by NO involves the activation of soluble guanylyl-cyclase, with subsequent accumulation of cGMP and activation of cGMP-dependent protein kinase. This in turn can activate several proteins such as K+ channels as well as induce vasodilatation by a decrease in cytosolic Ca2+. Oxidative stress and associated oxidative damage are mediators of vascular damage in several cardiovascular diseases, including hypertension. The increased production of the superoxide anion (O2-) by the vascular wall has been observed in different animal models of hypertension. Vascular relaxation to the endogenous NO-related response or to NO released from NO deliverers is impaired in vessels from renal hypertensive (2K-1C) rats. A growing amount of evidence supports the possibility that increased NO inactivation by excess O2- may account for the decreased NO bioavailability and vascular dysfunction in hypertension.

Production Quality Analysis of Special Elevator Cars Based on Six Sigma Approach

Project scope is to utilize Six Sigma DMAIC approach and lean principles to improve production quality of the case company. Six Sigma tools and techniques are explored through a literature review and later used in the quality control phase. The focus is set on the Pareto analysis to demonstrate the most evident development areas in the production. Materials that are not delivered to the customer or materials that damaged during transportation comprise the biggest share of all feedbacks. The goal is set to reduce these feedbacks by 50 %. Production observation pointed out that not only material shortages but also over-production is a daily situation. As a result, an initial picking list where the purchased and own production components can be seen, is created, reduction of over- and underproduction and material marking improvement are seen the most competitive options so that the goal can be reached. The picking list development should still continue to make sure that the list can be used not only in the case study but also in the industrial scale. The reduction of material missing category can be evaluated reliably not sooner than in few years because it takes time to gather the needed statistical information.