Escore de condição corporal e desempenho reprodutivo de vacas leiteiras mestiças lactantes

The objective was to evaluate the effect of lactation order, racial composition and milk production in the body condition score (BCS) at prepartum and its variation at postpartum. Furthermore, evaluate the effect of BCS at prepartum and its variation at postpartum on reproductive performance in dairy cows. Data was collected, relating to 470 parturitions for two years at 3 properties in Gurinhatã-MG. Milk production was measured monthly and the evaluation of the BCS was made by a single individual in the prepartum and postpartum (from 1.0 to 5.0). Was used the conventional artificial insemination, timed artificial insemination and controlled ride. The pregnancy diagnosis was through rectal palpation from 40 days after the service. The variables were analyzed using the SAS GLIMMIX procedure. The racial composition affected the BCS at prepartum (P=0.0003). Milk production tended to affect the BCS at prepartum (P=0.0957) and its variation in postpartum (P=0.1179). The overall conception rate was 57.3% and was affected (P<0.0001) by type of service. There was no effect of the BCS in prepartum (P=0.1544) and the variation of BCS (P=0.3127) on conception rate. Had no effect of BCS interaction at prepartum (P=0.9516) and the variation of BCS (P=0.9506) with the type of service on conception rate. The BCS at prepartum affect the service period (P<0.0001). Cows with BCS less than 3.25 became pregnant earlier. The variation of the BCS affected the service period (P<0.0001). Cows with loss of ECC became pregnant earlier than cows without loss. The average loss of ECC at postpartum was -0.692 points, not enough to damage the reproductive performance of dairy cows.

Learning Mechanisms for Information Filtering Agents

Postprint

Intelligent Agents = Learning Agents

Postprint

PEG-based solid dispersions enhanced the solubility and dissolution of eprosartan mesylate in-vitro

Abstract - This study investigates the effect of solid dispersions prepared from of polyethylene glycol (PEG) 3350 and 6000 Da alone or combined with the non-ionic surfactant Tween 80 on the solubility and dissolution rate of a poorly soluble drug eprosartan mesylate (ESM) in attempt to improve its bioavailability following its oral administration.

INTRODUCTION

ESM is a potent anti-hypertension [1]. It has low water solubility and is classified as a Class II drug as per the Biopharmaceutical Classification Systems (BCS) leading to low and variable oral bioavailability (approximately 13%). [2]. Thus, improving ESM solubility and/or dissolution rate would eventually improve the drug bioavailability. Solid dispersion is widely used technique to improve the water solubility of poorly water-soluble drugs employing various biocompatible polymers. In this study, we aimed to enhance the solubility and dissolution of EMS employing solid dispersion (SD) formulated from two grades of poly ethylene glycol (PEG) polymers (i.e. PEG 3350 & PEG 6000 Da) either individually or in combination with Tween 80.

MATERIALS AND METHODS

ESM SDs were prepared by solvent evaporation method using either PEG 3350 or PEG 6000 at various (drug: polymer, w/w) ratios 1:1, 1:2, 1:3, 1:4, 1:5 alone or combined with Tween 80 added at fixed percentage of 0.1 of drug by weight?. Physical mixtures (PMs) of drug and carriers were also prepared at same ratios. Drug solid dispersions and physical mixtures were characterized in terms of drug content, drug dissolution using dissolution apparatus USP II and assayed using HPLC method. Drug dissolution enhancement ratio (ER %) from SD in comparison to the plain drug was calculated. Drug-polymer interactions were evaluated using Differential Scanning Calorimetry (DSC) and FT-IR.

RESULTS AND DISCUSSION

The in vitro solubility and dissolution studies showed SDs prepared using both polymers produced a remarkable improvement (p<0.05) in comparison to the plain drug which reached around 32% (Fig. 1). The dissolution enhancement ratio was polymer type and concentration-dependent. Adding Tween 80 to the SD did not show further dissolution enhancement but reduced the required amount of the polymer to get the same dissolution enhancement. The DSC and FT-IR studies indicated that using SD resulted in transformation of drug from crystalline to amorphous form.

CONCLUSIONS

This study indicated that SDs prepared by using both polymers i.e. PEG 3350 and PEG 6000 improved the in-vitro solubility and dissolution of ESM remarkably which may result in improving the drug bioavailability in vivo.

Acknowledgments

This work is a part of MSc thesis of O.M. Ali at the Faculty of Pharmacy, Aleppo University, Syria.

REFERENCES

[1] Ruilope L, Jager B: Eprosartan for the treatment of hypertension. Expert Opin Pharmacother 2003; 4(1):107-14

[2] Tenero D, Martin D, Wilson B, Jushchyshyn J, Boike S, Lundberg, D, et al. Pharmacokinetics of intravenously and orally administered Eprosartan in healthy males: absolute bioavailability and effect of food. Biopharm Drug Dispos 1998; 19(6): 351- 6.

ARB: Phase II window of opportunity study of short-term preoperative treatment with enzalutamide in ER-positive and triple-negative breast cancer

The androgen receptor (AR) is expressed in 60-80% of breast cancers (BC) across all molecular phenotypes, with a higher incidence in oestrogen receptor positive (ER+) BC compared to ER negative tumours. In ER+ disease, AR-expression has been linked to endocrine resistance which might be reversed with combined treatment targeting ER and AR. In triple negative BCs (TNBC), preclinical and clinical investigations have described a subset of patients that express the AR and are sensitive to androgen blockade, providing a novel therapeutic target. Enzalutamide, a potent 2nd generation anti-androgen, has demonstrated substantial preclinical and clinical anti-tumour activity in AR+ breast cancer. Short-term preoperative window of opportunity studies are a validated strategy for novel treatments to provide proof-of-concept and define the most appropriate patient population by directly assessing treatment effects in tumour tissue before and after treatment. The ARB study aims to assess the anti-tumour effects of enzalutamide in early ER+ breast cancer and TNBC, to identify the optimal target population for further studies and to directly explore the biologic effects of enzalutamide on BC and stromal cells. Methods: ARB is an international, investigator sponsored WOO phase II study in women with newly diagnosed primary ER+ BC or AR+ TNBC of ≥ 1cm. The study has two cohorts. In the ER+ cohort, postmenopausal patients will be randomised 2:1 to receive either enzalutamide (160mg OD) plus exemestane (50mg OD) or exemestane (25mg OD). In the TNBC cohort, AR+ will receive single agent treatment with enzalutamide (160mg OD). Study treatment is planned for 15–29 days, followed by surgery or neo-adjuvant therapy. Tissue and blood samples are collected before treatment and on the last day of study treatment. The primary endpoint is inhibition of tumour-cell proliferation, as measured by change in Ki67 expression, determined centrally by 2 investigators. Secondary endpoints include induction of apoptosis (Caspase3), circulating hormone levels and safety. ARB aims to recruit ≈235 patients from ≈40 sites in the UK, Germany, Spain and USA. The study is open to recruitment.

Threat Analysis of BlackEnergy Malware for Synchrophasor based Real-time Control and Monitoring in Smart Grid

The BlackEnergy malware targeting critical infrastructures has a long history. It evolved over time from a simple DDoS platform to a quite sophisticated plug-in based malware. The plug-in architecture has a persistent malware core with easily installable attack specific modules for DDoS, spamming, info-stealing, remote access, boot-sector formatting etc. BlackEnergy has been involved in several high profile cyber physical attacks including the recent Ukraine power grid attack in December 2015. This paper investigates the evolution of BlackEnergy and its cyber attack capabilities. It presents a basic cyber attack model used by BlackEnergy for targeting industrial control systems. In particular, the paper analyzes cyber threats of BlackEnergy for synchrophasor based systems which are used for real-time control and monitoring functionalities in smart grid. Several BlackEnergy based attack scenarios have been investigated by exploiting the vulnerabilities in two widely used synchrophasor communication standards: (i) IEEE C37.118 and (ii) IEC 61850-90-5. Specifically, the paper addresses reconnaissance, DDoS, man-in-the-middle and replay/reflection attacks on IEEE C37.118 and IEC 61850-90-5. Further, the paper also investigates protection strategies for detection and prevention of BlackEnergy based cyber physical attacks.

Towards a Resilience Metric Framework for Cyber-Physical Systems

Resilience is widely accepted as a desirable system property for cyber-physical systems. However, there are no metrics that can be used to measure the resilience of cyber-physical systems (CPS) while the multi-dimensional nature of performance in these systems is considered. In this work, we present first results towards a resilience metric framework. The key contributions of this framework are threefold: First, it allows to evaluate resilience with respect to different performance indicators that are of interest. Second, complexities that are relevant to the performance indicators of interest, can be intentionally abstracted. Third and final, it supports the identification of reasons for good or bad resilience to improve system design.

Pathogenic effect of microorganisms on loggerhead eggs

[EN] Different types of fungi and bacteria have been isolated from hatched and non-hatched as well as failed and non-failed eggs in natural sea turtles nests (Marco et al. 2006, Phillott and Parmenter, 2001, Phillott et al. 2001). Microbiota infections are common in artificial incubation activities and they seem to have an important negative impact on embryo development (Phillott, 2002). However, no clear evidences of their pathogenic effects have been described. The aim of this study was to investigate whether fungi and bacteria represent pathogenic agents to sea turtle eggs, and to assess whether there exists a specific period during incubation in which eggs are more susceptible to microorganisms.

Efforts to increase the participation of local communities in the conservation of the endangered loggerhead population of Cape Verde

[EN] The loggerhead population of Cape Verde is one of the most important in the world. Several islands from this archipelago capture nesting females for human consumption. This a widespread practice in the local population that can be killing more than 25% of nesting females every year. This activity is not relevant for the general economy of the country but can be important for some families.

Evaluation of male breeding population inferred from paternity analyses in the Cape Verde islands

[EN] Because of the extensive migrations of marine turtles through the ocean, many aspects of their biology have been unknown for a long time. However, much information has been recently gained from genetic studies and population monitoring of female turtles at their nesting sites. In contrast, still very little is known on the genetic diversity, population structure and dispersal patterns of the male breeding population, mainly because of the difficulty of capturing and monitoring them at sea. The aim of this study is to assess the genetic patterns of the male breeding population of the loggerhead turtle, Caretta caretta, using a non invasive approach and compare them to the female breeding population.

Conservation genetics of North Atlantic loggerhead sea turtles: analysis of nuclear and mitochondrial DNA

[EN] Complex population structure has been described for the loggerhead sea turtle (Caretta caretta), revealing lower levels of population genetic structure in nuclear compared to mitochondrial DNA assays. This may result from mating during spatially overlapping breeding migrations, or male-biased dispersal as previously found for the green turtle (Chelonia mydas). To further investigate these multiple possibilities, we carried out a comparative analysis from twelve newly developed microsatellite loci and the mitochondrial DNA control region (~804 bp) in adult females of the Cape Verde Islands (n=158), and Georgia, USA (n=17).

Deconstruction-reconstruction of Computer Game and Immersive Environment Semiotics

Computer game technology produces compelling ‘immersive environments’ where our digitally-native youth play and explore. Players absorb visual, auditory and other signs and process these in real time, making rapid choices on how to move through the game-space to experience ‘meaningful play’. How can immersive environments be designed to elicit perception and understanding of signs? In this paper we explore game design and gameplay from a semiotic perspective, focusing on the creation of meaning for players as they play the game. We propose a theory of game design based on semiotics.

'Unrealart'. A New Medium for Artistic Expression Using a Commercial Game Engine: Galleries and Installations

In this paper, we explore the use of a commercial computer game-engine “Unreal Tournament 2004” (UT2004) to produce “Immersive Environments” (IEs) which provide the digital artist with a new mode of expression, to engage with the viewing public as individuals or in collaboration. We explore two modalities of Art, the ‘gallery’ and the ‘installation’. Through a reflection on various twentieth-century abstract artists, we indicate how this technology may be engaged to more fully realize their philosophies and projects. Finally, we suggest how this technology may lead to new forms of artistic expression in our contemporary digital world.

Microbiological assessment of indoor air quality at different hospital sites

Poor hospital indoor air quality (IAQ) may lead to hospital-acquired infections, sick hospital syndrome and various occupational hazards. Air-control measures are crucial for reducing dissemination of airborne biological particles in hospitals. The objective of this study was to perform a survey of bioaerosol quality in different sites in a Portuguese Hospital, namely the operating theater (OT), the emergency service (ES) and the surgical ward (SW). Aerobic mesophilic bacterial counts (BCs) and fungal load (FL) were assessed by impaction directly onto tryptic soy agar and malt extract agar supplemented with antibiotic chloramphenicol (0.05%) plates, respectively using a MAS-100 air sampler. The ES revealed the highest airborne microbial concentrations (BC range 240-736 CFU/m(3) CFU/m(3); FL range 27-933 CFU/m(3)), exceeding, at several sampling sites, conformity criteria defined in national legislation [6]. Bacterial concentrations in the SW (BC range 99-495 CFU/m(3)) and the OT (BC range 12-170 CFU/m(3)) were under recommended criteria. While fungal levels were below 1 CFU/m(3) in the OT, in the SW (range 1-32 CFU/m(3)), there existed a site with fungal indoor concentrations higher than those detected outdoors. Airborne Gram-positive cocci were the most frequent phenotype (88%) detected from the measured bacterial population in all indoor environments. Staphylococcus (51%) and Micrococcus (37%) were dominant among the bacterial genera identified in the present study. Concerning indoor fungal characterization, the prevalent genera were Penicillium (41%) and Aspergillus (24%). Regular monitoring is essential for assessing air control efficiency and for detecting irregular introduction of airborne particles via clothing of visitors and medical staff or carriage by personal and medical materials. Furthermore, microbiological survey data should be used to clearly define specific air quality guidelines for controlled environments in hospital settings.

Desenvolvimento de um método para correção de curvas de desempenho em bombas centrífugas submersas operando com fluidos viscosos

Electrical Submersible Pump (ESP) is used as an artificial lift technique. However, pumping viscous oil is generally associated with low Reynolds number flows. This condition leads to a performance degradation respect to the performance expected from the regular operation with water that most of the centrifugal pumps are originally designed for. These issues are considered in this investigation through a numerical study of the flow in two different multistage, semi-axial type ESPs. This investigation is carried out numerically using a Computational Fluid Dynamics (CFD) package, where the transient RANS equations are solved numerically. The turbulence is modeled using the SST model. Head curves for several operating conditions are compared with manufacturer’s curves and experimental data for a three-stage ESP, showing good agreement for a wide range of fluid viscosities and rotational speeds. Dimensionless numbers (n, n, n e Re) are used to investigate performance degradation of the ESPs. In addition, flow phenomena through the impellers of the ESPs are investigated using flow field from numerical results. Results show that performance degradation is directly related to rotational Reynolds number, Re. In addition, it was verified that performance degradation occurs for constant normalized specific speedn, which shows that performance degradation occurs similarly for different centrifugal pumps. Moreover, experimental data and numerical results agreed with a correlation from literature between head and flow correction factors proposed by Stepanoff (1967). A definition of modified Reynolds number was proposed and relates the head correction factor to viscosity. A correlation between head correction factor and the modified Reynolds number was proposed, which agreed well with numerical and experimental data. Then, a method to predict performance degradation based on the previous correlations was proposed. This method was compared with others from literature. In general, results and conclusions from this work can also be useful to bring more information about the flow of highly viscous fluids in pumps, especially in semi-axial, multistage ESPs.