Stability of repeated student evaluations of teaching in the second preclinical year of a medical curriculum

RESUME L'étude de la médecine à la Faculté de l'Université de Lausanne est un cursus de six ans. Depuis la réforme générale du curriculum en octobre 1995, le programme de la deuxième année consacrée à l'étude de l'être humain sain a été transformé. L'enseignement intégré par système ou organe a été introduit en remplaçant l'enseignement par discipline. Parallèlement, un système d'évaluation de l'enseignement par les étudiants a été proposé. Il a été amélioré au fil des années et depuis l'année académique 1998-99, l'évaluation est devenue systémique et régulière. Notre étude présente et compare les résultats des évaluations de l'enseignement et des enseignants de neuf cours intégrés dispensés en deuxième année durant deux années académiques (1998-99 et 1999-2000). Une forte corrélation entre les résultats des deux années consécutives ainsi qu'une importante disparité des estimations à l'intérieure de chacune de deux années ont été observées. Ceci démontre un engagement sérieux des étudiants dans le processus d'évaluation, révèle la pertinence de leur analyse et leur bonne capacité de discernement. L'analyse de nos résultats montre que les évaluations effectuées par les étudiants peuvent constituer une source fiable d'informations et contribuer à l'amélioration du processus d'enseignement.

Finite-size scaling investigation of the liquid-liquid critical point in ST2 water and its stability with respect to crystallization.

The liquid-liquid critical point scenario of water hypothesizes the existence of two metastable liq- uid phases low-density liquid (LDL) and high-density liquid (HDL) deep within the supercooled region. The hypothesis originates from computer simulations of the ST2 water model, but the stabil- ity of the LDL phase with respect to the crystal is still being debated. We simulate supercooled ST2 water at constant pressure, constant temperature, and constant number of molecules N for N ≤ 729 and times up to 1 μs. We observe clear differences between the two liquids, both structural and dynamical. Using several methods, including finite-size scaling, we confirm the presence of a liquid-liquid phase transition ending in a critical point. We find that the LDL is stable with respect to the crystal in 98% of our runs (we perform 372 runs for LDL or LDL-like states), and in 100% of our runs for the two largest system sizes (N = 512 and 729, for which we perform 136 runs for LDL or LDL-like states). In all these runs, tiny crystallites grow and then melt within 1 μs. Only for N ≤ 343 we observe six events (over 236 runs for LDL or LDL-like states) of spontaneous crystal- lization after crystallites reach an estimated critical size of about 70 ± 10 molecules.

Final Report Factors Influencing Stability of Granular Base Course Mixes

To evaluate the various factors influencing the stability of granular base course mixes, three primary goals were included in the project: (1) determination of a suitable and realistic laboratory method of compaction; (2) effect of gradation, density and mineralogy of the fines on sheara ing strength; and (3) possible improvement of the shear strength with organic and inorganic chemical stabilization additives.

An Investigation of the Interstate 80 Rutting in Adair County, October 1983

This investigation was initiated to determine the causes of a rutting problem that occurred on Interstate 80 in Adair County. 1-80 from Iowa 25 to the Dallas County line was opened to traffic in November, 1960. The original pavement consisted of 4-1/2" of asphalt cement concrete over 12" of rolled stone base and 12" of granular subbase. A 5-1/2" overlay of asphalt cement concrete was placed in 1964. In 1970-1972, the roadway was resurfaced with 3" of asphalt cement concrete. In 1982, an asphalt cement concrete inlay, designed for a 10-year life, was placed in the eastbound lane. The mix designs for all courses met or exceeded all current criteria being used to formulate job mixes. Field construction reports indicate .that asphalt usage, densities, field voids and filler bitumen determinations were well within specification limits on a very consistent basis. Field laboratory reports indicate that laboratory voids for the base courses were within the prescribed limits for the base course and below the prescribed limits for the surface course. Instructional memorandums do indicate that extreme caution should be exercised when the voids are at or near the lower limits and traffic is not minimal. There is also a provision that provides for field voids controlling when there is a conflict between laboratory voids and field voids. It appears that contract documents do not adequately address the directions that must be taken when this conflict arises since it can readily be shown that laboratory voids must be in the very low or dangerous range if field voids are to be kept below the maximum limit under the current density specifications. A rut depth survey of January, 1983, identified little or no rutting on this section of roadway. Cross sections obtained in October, 1983, identified rutting which ranged from 0 to 0.9" with a general trend of the rutting to increase from a value of approximately 0.3" at MP 88 to a rut depth of 0.7" at MP 98. No areas of significant rutting were identified in the inside lane. Structural evaluation with the Road Rater indicated adequate structural capacity and also indicated that the longitudinal subdrains were functioning properly to provide adequate soil support values. Two pavement sections taken from the driving lane indicated very little distortion in the lower 7" base course. Essentially all of the distortion had occurred in the upper 2" base course and the 1..;1/2" surface course. Analysis of cores taken from this section of Interstate 80 indicated very little densification of either the surface or the upper or lower base courses. The asphalt cement content of both the Type B base courses and the Type A surface course were substantially higher than the intended asphalt cement content. The only explanation for this is that the salvaged material contained a greater percent of asphalt cement than initial extractions indicated. The penetration and viscosity of the blend of new asphalt cement and the asphalt cement recovered from the salvaged material were relatively close to that intended for this project. The 1983 ambient temperatures were extremely high from June 20 through September 10. The rutting is a result of a combination of adverse factors including, (1) high asphalt content, (2) the difference between laboratory and field voids, (3) lack of intermediate sized crushed particles, (4) high ambient temperatures. The high asphalt content in the 2" upper base course produced an asphalt concrete mix that did not exhibit satisfactory resistance to deformation from heavy loading. The majority of the rutting resulted from distortion of the 2" upper base lift. Heater planing is recommended as an interim corrective action. Further recommendation is to design for a 20-year alternative by removing 2-1/2" of material from the driving lane by milling and replacing with 2-1/2" of asphalt concrete with improved stability. This would be .followed by placing 1-1/2" of high quality resurfacing on the entire roadway. Other recommendations include improved density and stability requirements for asphalt concrete on high traffic roadways.

Biotecnologia Ambiental. Aplicacions biotecnològiques a la millora del medi ambient

La biotecnología ambiental comprende el conjunto de actividades tecnológicas que facilitan la comprensión y la gestión de los sistemas biológicos en el medio ambiente, con el fin de proveer productos y servicios. Actualmente, la gestión del medio ambiente y de sus recursos naturales no se comprende si no se realiza de manera sostenible. Los avances científicos y tecnológicos le están permitiendo a la biotecnología ambiental, el desarrollo de nuevas herramientas y aplicaciones con los que responder a los principales retos medioambientales actuales. Entre estos debe destacarse la disponibilidad de recursos hídricos y energéticos. El papel esencial de los microorganismos tanto en el ciclo de los elementos como en el funcionamiento de los ecosistemas naturales ha comportado una estrecha relación entre la biotecnología ambiental y la ecología microbiana. Las nuevas técnicas moleculares de genómica, proteómica i metabolómica, han facilitado a la biotecnología ambiental plantearse nuevas perspectivas a partir de los recientes conocimientos estructurales y funcionales de los consorcios microbianos. La comprensión de la biodiversidad y la funcionalidad de los estos consorcios microbianos está introduciendo una nueva forma de gestionar los recursos naturales y el medio ambiente, de manera similar a como actualmente el estudio de los recursos humanos de una empresa resulta una herramienta esencial para la dirección de empresas y el establecimiento de planes estratégicos. Los principales ámbitos de interés actual de la biotecnología ambiental son aquellos aspectos medioambientales relacionados con el cambio climático, la búsqueda de nuevas fuentes energéticas renovables y alternativas, la mejora de los procesos de reciclaje, el aprovechamiento y la gestión de recursos hídricos, y la mejora de las interacciones entre salud y medio ambiente. No obstante, en nuestro ámbito territorial presentan una mayor importancia y demanda social las actividades y metodologías tecnológicas de la biotecnología ambiental relacionadas con los procesos de reciclaje y bioremediación de suelos contaminados, la mejora de la gestión y el control de la calidad de nuestros recursos hídricos y la mejora de aquellas actividades donde interacciona la salud y el medio ambiente. Las aportaciones significativas de la biotecnología ambiental en el desarrollo de energías realmente alternativas y en el control del cambio climático queda relegadas en un segundo término des de un punto de vista de su aplicabilidad actual y futura a corto plazo.

L'experiència pilot desenvolupada a partir del projecte d'innovació "La gestió integrada de la qualitat, el medi ambient i la seguretat en la docència experimental dels estudis de grau de les Facultats de Belles Arts"

Es presenta un projecte d'innovació docent, la recerca desevolupada del qual va incorporar aspectes relacionats amb la seguretat i la sostenibilitat dels procediments realitzats als tallers i laboratoris de les Facultats de Belles Arts, aplicant criteris de gestió de qualitat. Els resultats d'aquestes investigacions tenen una extensió social en l'àmbit de les Belles Arts en general. El projecte d'innovació docent va aplicar criteris de gestió de qualitat. La recerca desenvolupada va incorporar aspectes relacionats amb la seguretat i la sostenibilitat dels procediments als tallers i laboratoris de les Facultats de Belles Arts. Els resultats d¿aquestes investigacions tenen una extensió social en l'àmbit de les Belles Arts en general. Amb aquest projecte es va redissenyar un model de procediment normalitzat de treball (PNT) que 11 tallers diferents de les Facultats de BBAA de Barcelona, Conca i València van utilitzar per a elaborar 14 PNT i 3 vídeos de suport. Aquests es van aplicar durant una experiència pilot (curs 2009-2010). El nombre de participants en l¿experiència va ser de 211 alumnes, 15 professors, 10 tècnics de taller, majoritàriament de BBAA de la Universitat de Barcelona. L'experiència pilot va demostrar satisfactòriament la viabilitat de l'aplicació del model de PNT adoptat i els beneficis, de la seva aplicació, orientats a la millora continuada de la qualitat docent i de la investigació. Per concloure el projecte es va elaborar el procediment general (PG) que determina les pautes per a redactar un PNT. Aquest PG va ser aprovat recentment per la CSSMA del Centre2 i es podrà aplicar en el futur en la Facultat de BBAA de Barcelona. Sobre l'experiència s'han realitzat les publicacions pertinents (un llibre i un DVD) i s'ha participat també en dos congressos.

Surface structure and stability of PdZn and PtZn alloys: Density-functional slab model studies

Geometric parameters of binary (1:1) PdZn and PtZn alloys with CuAu-L10 structure were calculated with a density functional method. Based on the total energies, the alloys are predicted to feature equal formation energies. Calculated surface energies of PdZn and PtZn alloys show that (111) and (100) surfaces exposing stoichiometric layers are more stable than (001) and (110) surfaces comprising alternating Pd (Pt) and Zn layers. The surface energy values of alloys lie between the surface energies of the individual components, but they differ from their composition weighted averages. Compared with the pure metals, the valence d-band widths and the Pd or Pt partial densities of states at the Fermi level are dramatically reduced in PdZn and PtZn alloys. The local valence d-band density of states of Pd and Pt in the alloys resemble that of metallic Cu, suggesting that a similar catalytic performance of these systems can be related to this similarity in the local electronic structures.

Clinal variation in a brown lemur (Eulemur spp.) hybrid zone: Combining morphological, genetic and climatic data to examine stability.

Studies of hybrid zones can inform our understanding of reproductive isolation and speciation. Two species of brown lemur (Eulemur rufifrons and E. cinereiceps) form an apparently stable hybrid zone in the Andringitra region of south-eastern Madagascar. The aim of this study was to identify factors that contribute to this stability. We sampled animals at 11 sites along a 90-km transect through the hybrid zone and examined variation in 26 microsatellites, the D-loop region of mitochondrial DNA, six pelage and nine morphological traits; we also included samples collected in more distant allopatric sites. Clines in these traits were noncoincident, and there was no increase in either inbreeding coefficients or linkage disequilibrium at the centre of the zone. These results could suggest that the hybrid zone is maintained by weak selection against hybrids, conforming to either the tension zone or geographical selection-gradient model. However, a closer examination of clines in pelage and microsatellites indicates that these clines are not sigmoid or stepped in shape but instead plateau at their centre. Sites within the hybrid zone also occur in a distinct habitat, characterized by greater seasonality in precipitation and lower seasonality in temperature. Together, these findings suggest that the hybrid zone may follow the bounded superiority model, with exogenous selection favouring hybrids within the transitional zone. These findings are noteworthy, as examples supporting the bounded superiority model are rare and may indicate a process of ecologically driven speciation without geographical isolation.

Characterization of surface functional groups present on laboratory-generated and ambient aerosol particles by means of heterogeneous titration reactions

A Knudsen flow reactor has been used to quantify surface functional groups on aerosols collected in the field. This technique is based on a heterogeneous titration reaction between a probe gas and a specific functional group on the particle surface. In the first part of this work, the reactivity of different probe gases on laboratory-generated aerosols (limonene SOA, Pb(NO3)2, Cd(NO3)2) and diesel reference soot (SRM 2975) has been studied. Five probe gases have been selected for the quantitative determination of important functional groups: N(CH3)3 (for the titration of acidic sites), NH2OH (for carbonyl functions), CF3COOH and HCl (for basic sites of different strength), and O3 (for oxidizable groups). The second part describes a field campaign that has been undertaken in several bus depots in Switzerland, where ambient fine and ultrafine particles were collected on suitable filters and quantitatively investigated using the Knudsen flow reactor. Results point to important differences in the surface reactivity of ambient particles, depending on the sampling site and season. The particle surface appears to be multi-functional, with the simultaneous presence of antagonistic functional groups which do not undergo internal chemical reactions, such as acid-base neutralization. Results also indicate that the surface of ambient particles was characterized by a high density of carbonyl functions (reactivity towards NH2OH probe in the range 0.26-6 formal molecular monolayers) and a low density of acidic sites (reactivity towards N(CH3)3 probe in the range 0.01-0.20 formal molecular monolayer). Kinetic parameters point to fast redox reactions (uptake coefficient ?0>10-3 for O3 probe) and slow acid-base reactions (?0<10-4 for N(CH3)3 probe) on the particle surface. [Authors]

The evolutionary conserved BER1 gene is involved in microtubule stability in yeast

In yeast, microtubules are dynamic filaments necessary for spindle and nucleus positioning, as well as for proper chromosome segregation. We identify a function for the yeast gene BER1 (Benomyl REsistant 1) in microtubule stability. BER1 belongs to an evolutionary conserved gene family whose founding member Sensitivity to Red light Reduced is involved in red-light perception and circadian rhythms in Arabidopsis. Here, we present data showing that the ber1Delta mutant is affected in microtubule stability, particularly in presence of microtubule-depolymerising drugs. The pattern of synthetic lethal interactions obtained with the ber1Delta mutant suggests that Ber1 may function in N-terminal protein acetylation. Our work thus suggests that microtubule stability might be regulated through this post-translational modification on yet-to-be determined proteins

Stability and robustness of blood variables in an antidoping context.

Introduction:  With the setting up of the newly Athlete's Biological Passport antidoping programme, novel guidelines have been introduced to guarantee results beyond reproach. We investigated in this context, the effect of storage time on the variables commonly measured for the haematological passport. We also wanted to assess for these variables, the within and between analyzer variations. Methods:  Blood samples were obtained from top level male professional cyclists (27 samples for the first part of the study and 102 for the second part) taking part to major stage races. After collection, they were transported under refrigerated conditions (2 °C < T < 12 °C), delivered to the antidoping laboratory, analysed and then stored at approximately 4 °C to conduct analysis at different time points up to 72 h after delivery. A mixed-model procedure was used to determine the stability of the different variables. Results:  As expected haemoglobin concentration was not affected by storage and showed stability for at least 72 h. Under the conditions of our investigation, the reticulocytes percentage showed a much better stability than previous published data (> 48 h) and the technical comparison of the haematology analyzer demonstrated excellent results. Conclusion:  In conclusion, our data clearly demonstrate that as long as the World Anti-Doping Agency's guidelines are followed rigorously, all blood results reach the quality level required in the antidoping context.