Food webs: Experts consuming families of experts

Food webs of habitats as diverse as takes or desert valleys are known to exhibit common

Positive association between nuclear Runx2 and oestrogen-progesterone receptor gene expression characterises a biological subtype of breast cancer

Purpose: The runt-related transcription factor, Runx2 may have an oncogenic role in mediating metastatic events in breast cancer, but whether Runx2 has a role in the early phases of breast cancer development is not clear. We examined the expression of Runx2 and its relationship with oestrogen receptor (ER) and progesterone receptor (PR) in breast cancer cell lines and tissues.

RUNX3 Inactivation in Colorectal Polyps Arising Through Different Pathways of Colonic Carcinogenesis

OBJECTIVES: We hypothesized that RUNX3 inactivation by promoter hypermethylation in colorectal polyps is an early molecular event in colorectal carcinogenesis.
METHODS: RUNX3 protein expression was analyzed immunohistochemically in 50 sporadic colorectal polyps comprising 19 hyperplastic polyps (HPs), 14 traditional serrated adenomas (TSAs), and 17 sporadic traditional adenomas (sTAs) as well as in 19 familial adenomatous polyposis (FAP) samples from 10 patients showing aberrant crypt foci (ACF) (n=91), small adenomas (SmAds) (n=40), and large adenomas (LAds) (n=13). In addition, we assessed the frequency of promoter hypermethylation of RUNX3 by methylation-specific PCR (MSP) in all the 50 sporadic polyps as well as 38 microdissected FAP polyps comprising ACF, SmAds, and LAds obtained from 7 FAP samples. A total of 12 normal colon samples were also included for RUNX3 MSP analysis.
RESULTS: Compared to normal colon (2 of 12, 16%) and sTAs (3 of 17, 18%), HPs (15 of 19, 79%) and TSAs (8 of 14, 57%) displayed significant inactivation of RUNX3 (P<0.05). In FAP, RUNX3 inactivation was more frequently seen in ACF (78 of 91, 86%), SmAds (25 of 40, 62%), and LAds (6 of 13, 46%) compared to normal mucosa (0 of 19, 0%) in the same samples (all P<0.05). Promoter hypermethylation of RUNX3 was significantly higher in colorectal polyps (64 of 87, 74%) compared to normal colon (2 of 12, 16%) (P=0.001). Serrated polyps such as HPs (17 of 19, 89%) and TSAs (12 of 14, 86%) were significantly more methylated than sTAs (7 of 17, 44%) (P=0.004). RUNX3 hypermethylation was observed in 28 of the total 38 (74%) FAP polyps. Overall, RUNX3 promoter methylation correlated with inactivation of RUNX3 expression in sporadic (27 of 36, 75%) (P=0.022) and FAP (21 of 28, 75%) (P=0.021) polyps.
CONCLUSIONS: Our data suggest that RUNX3 inactivation due to promoter hypermethylation in colorectal polyps represents an early event in colorectal cancer (CRC) progression. In addition, epigenetic RUNX3 inactivation is a frequent event in the serrated colonic polyps as well as in the ACF of FAP polyps.

Impacts of unregulated harvesting on a recovering stock of native oysters (Ostrea edulis)

In Strangford Lough, Northern Ireland stocks of Ostrea edulis collapsed in the 1890s and the species was rarely recorded again until 1998 when the wild stock was estimated to be 100,000. The stock increased to 1.2 million in 2003 but declined to 650,000 by 2005. In 2007 the stock exceeded 1 million. The initial recovery of wild stocks is attributed to the combined effects of spawning commercial O. edulis stocks of and larval retention due to local hydrography. The stock decline between 2003 and 2005 is attributed to unregulated harvesting. Significant differences in abundances between sites over this period may be explained by the exploitation of more-readily accessible sites initially and of less accessible sites later. Oysters at sites where there was minimal exploitation probably contributed to widespread recruitment in 2007. Sustainable management of recovering native oyster stocks in Strangford Lough and elsewhere and will be impossible without appropriate legislation and enforcement.

High-surface thermally stable mesoporous gallium phosphates constituted by nanoparticles as primary building blocks

In constant, search for micro/mesoporous materials, gallium phosphates, have attracted continued interest due to the large pore size reported for some of these solids in comparison with analogous aluminum phosphates. However up to now, the porosity of gallium phosphates collapsed upon template removal or exposure to the ambient moisture. In the present work, we describe high-surface thermally stable mesoporous gallium phosphates synthesized from gallium propoxide and PCl3 and different templating agents such as amines (dipropylamine, piperidine and aminopiperidine) and quaternary ammonium salts (C16H33(CH3)3NBr and C16PyCl). These highly reactive precursors have so far not been used as gallium and phosphate sources for the synthesis of gallophosphates. Conceptually, our present synthetic procedure is based on the fast formation of gallium phosphate nanoparticles via the reaction of gallium propoxide with PCl3 and subsequent construction of the porous material with nanoparticles as building blocks. The organization of the gallophosphate nanoparticles in stable porous structures is effected by the templates. Different experimental procedures varying the molar composition of the sol-gel, pH and the pretreatment of gallium precursor were assayed, most of them leading to satisfactory materials in terms of thermal stability and porosity. In this way, a series of gallium phosphates with surface are above 200 m(2) g(-1), and narrow pore size from 3 to 6 nm and remarkable thermal stability (up to 550 degrees C) have been prepared. In some cases, the structure tends to show some periodicity and regularity as determined by XRD. The remarkable stability has allowed us to test the catalytic activity of gallophosphates for the aerobic oxidation of alkylaromatics with notable good results. Our report reopens the interest for gallophosphates in heterogeneous catalysis. (C) 2010 Elsevier Inc. All rights reserved.

A kinetic study of the liquid-phase hydrogenation of citral on Au/TiO2 and Pt-Sn/TiO2 thin films in capillary microreactors

The kinetics of the liquid-phase hydrogenation of citral (3,7-dimethyl-2,6-octadienal) on Au/TiO2 and Pt-Sn/TiO2 thin films was studied in the temperature range 313-353 K and citral concentrations of 0.25-10.0 mol m(-3). The thin films were deposited onto the inner walls of silica capillaries with internal diameter of 250 mu m. First-order dependence on hydrogen pressure and near zero order dependence on citral concentration were observed for the initial rate of citral hydrogenation over the Pt-Sn/TiO2 and Au/TiO2 thin films. The Au/TiO2 catalyst prevents citronellal formation. The highest yield of unsaturated alcohols was obtained on the Pt-Sn/TiO2 film at a reaction temperature of 343 K, liquid residence time of 30 min and a citral conversion of 99%. (C) 2011 Elsevier B.V. All rights reserved.

Influence of water on the carbon dioxide absorption by 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide

The effect of the addition of water on the absorption of carbon dioxide by the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide was studied experimentally by measuring the low-pressure carbon dioxide solubility and the viscosity of the liquid solvent at temperatures from 303 to 323 K. Water is only partially miscible with the ionic liquid up to a mole fraction of 0.302 at 293 K, 0.321 at 303 K and 0.381 at 323 K. It was observed that the solubility of carbon dioxide decreases with the quantity of water from a mole fraction of 2.63 × 10-2 for the pure ionic liquid at 303.4 K to a value of 1.88 × 10-2, a reduction of 30% of the solubility, for a mole fraction of water of 0.28. The viscosity of the liquid solvent also decreases, up to 40% at 303 K, from 28.6 mPa s for the pure ionic liquid to 16.4 mPa s for a water mole fraction of 0.302.

Spray Congealed Lipid Microparticles with High Protein Loading: Preparation and Solid State Characterization

The spray-congealing technique, a solvent-free drug encapsulation process, was successfully employed to obtain lipid-based particulate systems with high (10–20% w/w) protein loading. Bovine serum albumin (BSA) was utilised as model protein and three low melting lipids (glyceryl palmitostearate, trimirystin and tristearin) were employed as carriers. BSA-loaded lipid microparticles were characterised in terms of particle size, morphology and drug loading. The results showed that the microparticles exhibited a spherical shape, mean diameter in the range 150–300 µm and an encapsulation efficiency higher than 90%. Possible changes in the protein structure as a result of the manufacturing process was then investigated for the first time using UV spectrophotometry in fourth derivative mode and FT-Raman spectroscopy. The results suggested that the structural integrity of the protein was maintained within the particles. Thermal analysis indicated that the effect of protein on the thermal properties of the carriers could be detected. Spray-congealing could thus be considered a suitable technique to produce highly BSA-loaded microparticles preserving the structure of the protein.

Intravenous tolerance effectively overcomes enhanced pro-inflammatory responses and EAE severity in the absence of IL-12 receptor signaling

Intravenous (i.v.) administration of autoantigen effectively induces Ag-specific tolerance against experimental autoimmune encephalomyelitis (EAE). We and others have shown enhanced EAE severity in mice lacking IL-12 or its receptor, strongly suggesting an immunoregulatory effect of IL-12 signaling. To examine the role of IL-12 responsiveness in autoantigen-induced tolerance in EAE, we administered autoantigen i.v. in two distinct treatment regimes to wildtype and IL-12Rβ2(-/-) mice, immunized to develop EAE. Administration at the induction phase suppressed EAE in wildtype and IL-12Rβ2(-/-) mice however the effect was somewhat less potent in the absence of IL-12Rβ2. Expression of pro-inflammatory cytokines such as IFN-γ, IL-17 and IL-2, was inhibited in wild-type tolerized mice but less so in IL-12Rβ2(-/-) mice. I.v. antigen was also effective in suppressing disease in both genotypes when given during the clinical phase of disease with similar CNS inflammation, demyelination and peripheral inflammatory cytokine profiles observed in both genotypes. There was however a mild impact of a lack of IL-12 signaling on Treg induction during tolerance induction compared to WT mice in this treatment regime. These findings show that the enhanced severity of EAE that occurs in the absence of IL-12 signaling can be effectively overcome by i.v. autoantigen, indicating that this therapeutic effect is not primarily mediated by IL-12 and that i.v. tolerance could be a powerful approach in suppressing severe and aggressive MS.

Genome-wide Association Study Implicates HLA-C*01:02 as a Risk Factor at the Major Histocompatibility Complex Locus in Schizophrenia

BACKGROUND: We performed a genome-wide association study (GWAS) to identify common risk variants for schizophrenia. METHODS: The discovery scan included 1606 patients and 1794 controls from Ireland, using 6,212,339 directly genotyped or imputed single nucleotide polymorphisms (SNPs). A subset of this sample (270 cases and 860 controls) was subsequently included in the Psychiatric GWAS Consortium-schizophrenia GWAS meta-analysis. RESULTS: One hundred eight SNPs were taken forward for replication in an independent sample of 13,195 cases and 31,021 control subjects. The most significant associations in discovery, corrected for genomic inflation, were (rs204999, p combined = 1.34 × 10(-9) and in combined samples (rs2523722 p combined = 2.88 × 10(-16)) mapped to the major histocompatibility complex (MHC) region. We imputed classical human leukocyte antigen (HLA) alleles at the locus; the most significant finding was with HLA-C*01:02. This association was distinct from the top SNP signal. The HLA alleles DRB1*03:01 and B*08:01 were protective, replicating a previous study. CONCLUSIONS: This study provides further support for involvement of MHC class I molecules in schizophrenia. We found evidence of association with previously reported risk alleles at the TCF4, VRK2, and ZNF804A loci.

Association analysis of proopiomelanocortin (POMC) haplotypes in type 1 diabetes in a UK population

Aim

To assess the association of POMC haplotype-tagged single nucleotide polymorphisms (htSNPs) with the development of type 1 diabetes (T1D) in a Caucasian population.

Methods

All exons, intron 1, and approximately 6-kb upstream and 3-kb downstream of the POMC gene were bidirectionally resequenced to identify DNA polymorphisms in 30 individuals. Allele frequencies were determined (60 chromosomes) and efficient htSNPs were selected using the htSNP2 programme. Genotyping was performed in 390 cases, 339 controls and 245 T1D parent-offspring trios, using Taqman, Sequenom and direct-sequencing technologies.

Results

Thirteen polymorphisms (two novel) with a minor allele frequency greater than 1% were identified. Six POMC htSNPs (rs3754863 G>A, ss161151662 A>G, rs3754860 C>T, rs1009388 G>C, rs3769671 A>C, rs1042571 G>A) were identified. Allele and haplotype frequencies were similar between case and control groups (P>0.60 by permutation test), and assessment of allele transmission distortion from informative parents to affected offspring also failed to find any association. Stratification of these analyses for age-at-onset and HLA-DR risk group (DR3/DR4) revealed no significant associations. A haplotype block of 9.86-kb from rs3754863 to rs1042571 was identified, encompassing the POMC gene. Comparison of haplotype frequencies identified the GGCGAG haplotype as protective against T1D in 12.9% of cases vs. 18.3% of controls: ?2=8.18, Pc=0.03 by permutation test.

Conclusion

The POMC SNP haplotype GGCGAG may have a protective effect against T1D in the UK population. However, this finding needs to be replicated, and the cellular and molecular processes influenced by this POMC haplotype determined to fully appreciate its impact.

EMAS and ISO 14001 in the German industry – complements or substitutes?

The two environmental management system (EMS) standards EMAS and ISO 14001 have been available in Europe for the last 15 years. ISO 14001 has been taken up at a much larger scale but many firms in the German automotive and engineering industry have certified their EMSs according to both standards. Two research questions are addressed: (i) What explains why companies adopt both EMAS and ISO 14001? (ii) Are EMAS and ISO 14001 complements or substitutes? Based on 21 interviews with industrial and institutional representatives, this study finds that, first, the two standards are adopted for completely different reasons: while ISO 14001 is often done as a response to external pressure, EMAS tends to be motivated internally. Second, it is argued that EMAS and ISO 14001 are likely in a situation of direct competition at present which may well turn into complementarity in the future.

Implementation and testing of Lanczos-based algorithms for Random-Phase Approximation eigenproblems

The treatment of the Random-Phase Approximation Hamiltonians, encountered in different frameworks, like time-dependent density functional theory or Bethe-Salpeter equation, is complicated by their non-Hermicity. Compared to their Hermitian Hamiltonian counterparts, computational methods for the treatment of non-Hermitian Hamiltonians are often less efficient and less stable, sometimes leading to the breakdown of the method. Recently [Gruning et al. Nano Lett. 8 (2009) 28201, we have identified that such Hamiltonians are usually pseudo-Hermitian. Exploiting this property, we have implemented an algorithm of the Lanczos type for Random-Phase Approximation Hamiltonians that benefits from the same stability and computational load as its Hermitian counterpart, and applied it to the study of the optical response of carbon nanotubes. We present here the related theoretical grounds and technical details, and study the performance of the algorithm for the calculation of the optical absorption of a molecule within the Bethe-Salpeter equation framework. (C) 2011 Elsevier B.V. All rights reserved.

Effects of sintering temperature on morphology and mechanical characteristics of 3D printed porous titanium used as dental implant

Porous titanium samples were manufactured using the 3D printing and sintering method in order to determine the effects of final sintering temperature on morphology and mechanical properties. Cylindrical samples were printed and split into groups according to a final sintering temperature (FST). Irregular geometry samples were also printed and split into groups according to their FST. The cylindrical samples were used to determine part shrinkage, in compressive tests to provide stress-strain data, in microCT scans to provide internal morphology data and for optical microscopy to determine surface morphology. All of the samples were used in microhardness testing to establish the hardness. Below 1100 C FST, shrinkage was in the region of 20% but increased to approximately 30% by a FST of 1300 C. Porosity varied from a maximum of approximately 65% at the surface to the region of 30% internally. Between 97 and 99% of the internal porosity is interconnected. Average pore size varied between 24 µm at the surface and 19 µm internally. Sample hardness increased to in excess of 300 HV0.05 with increasing FST while samples with an FST of below 1250 C produced an elastic-brittle stress/strain curve and samples above this displayed elastic-plastic behaviour. Yield strength increased significantly through the range of sintering temperatures while the Young's modulus remained fairly consistent. © 2013 Elsevier B.V.