Whole body vibration training:analysis and characterization

The aim of this work is to contribute to the analysis and characterization of training with whole body vibration (WBV) and the resultant neuromuscular response. WBV aims to mechanically activate muscle by eliciting stretch reflexes. Generally, surface electromyography is utilized to assess muscular response elicited by vibrations. However, EMG analysis could potentially bring to erroneous conclusions if not accurately filtered. Tiny and lightweight MEMS accelerometers were found helpful in monitoring muscle motion. Displacements were estimated integrating twice the acceleration data after gravity and small postural subject adjustments contribution removal. Results showed the relevant presence of motion artifacts on EMG recordings, the high correlation between muscle motion and EMG activity and how resonance frequencies and dumping factors depended on subject and his positioning onto the vibrating platform. Stimulations at the resonant frequency maximize muscles lengthening and in turn, muscle spindle solicitation , which may produce more muscle activation. Local mechanical stimulus characterization (Le, muscle motion analysis) could be meaningful in discovering proper muscle stimulation and may contribute to suggest appropriate and effective WBV exercise protocols. ©2009 IEEE.

Rapid machine tool verification

This paper describes work carried out to develop methods of verifying that machine tools are capable of machining parts to within specification, immediately before carrying out critical material removal operations, and with negligible impact on process times. A review of machine tool calibration and verification technologies identified that current techniques were not suitable due to requirements for significant time and skilled human intervention. A 'solution toolkit' is presented consisting of a selection circular tests and artefact probing which are able to rapidly verify the kinematic errors and in some cases also dynamic errors for different types of machine tool, as well as supplementary methods for tool and spindle error detection. A novel artefact probing process is introduced which simplifies data processing so that the process can be readily automated using only the native machine tool controller. Laboratory testing and industrial case studies are described which demonstrate the effectiveness of this approach.

Epigenetic Basis of Centromere Maintenance and Inheritance

Centromeres are essential chromosomal loci at which kinetochore formation occurs for spindle fiber attachment during mitosis and meiosis, guiding proper segregation of chromosomes. In humans, centromeres are located at large arrays of alpha satellite DNA, contributing to but not defining centromere function. The histone variant CENP-A assembles at alpha satellite DNA, epigenetically defining the centromere. CENP-A containing chromatin exists as an essential domain composed of blocks of CENP-A nucleosomes interspersed with blocks of H3 nucleosomes, and is surrounded by pericentromeric heterochromatin. In order to maintain genomic stability, the CENP-A domain is propagated epigenetically over each cell division; disruption of propagation is associated with chromosome instabilities such as aneuploidy, found in birth defects and in cancer.

The CENP-A chromatin domain occupies 30-45% of the alpha satellite array, varying in genomic distance according to the underlying array size. However, the molecular mechanisms that control assembly and organization of CENP-A chromatin within its genomic context remain unclear. The domain may shift, expand, or contract, as CENP-A is loaded and dispersed each cell cycle. We hypothesized that in order to maintain genome stability, the centromere is inherited as static chromatin domains, maintaining size and position within the pericentric heterochromatin. Utilizing stretched chromatin fibers, I found that CENP-A chromatin is limited to a sub-region of the alpha satellite array that is fixed in size and location through the cell cycle and across populations.

The average amount of CENP-A at human centromeres is largely consistent, implying that the variation in size of CENP-A domains reflects variations in the number of CENP-A subdomains and/or the density of CENP-A nucleosomes. Multi-color nascent protein labeling experiments were utilized to examine the distribution and incorporation of distinct pools of CENP-A over several cell cycles. I found that in each cell cycle there is independent CENP-A distribution, occurring equally between sister centromeres across all chromosomes, in similar quantities. Furthermore, centromere inheritance is achieved through specific placement of CENP-A, following an oscillating pattern that fixes the location and size of the CENP-A domain. These results suggest that spatial and temporal dynamics of CENP-A are important for maintaining centromere and genome stability.

Primary pulmonary myxoid sarcoma with EWSR1-CREB1 fusion: a new tumor entity.

We present clinicopathologic data on 10 pulmonary myxoid sarcomas, which are defined by distinctive histomorphologic features and characterized by a recurrent fusion gene, that appear to represent a distinct tumor entity at this site. The patients [7 female, 3 male; aged 27 to 67 y (mean, 45 y)] presented with local or systemic symptoms (n=5), symptoms from cerebral metastasis (1), or incidentally (2). Follow-up of 6 patients showed that 1 with brain metastasis died shortly after primary tumor resection, 1 developed a renal metastasis but is alive and well, and 4 are disease free after 1 to 15 years. All tumors involved pulmonary parenchyma, with a predominant endobronchial component in 8 and ranged from 1.5 to 4 cm. Microscopically, they were lobulated and composed of cords of polygonal, spindle, or stellate cells within myxoid stroma, morphologically reminiscent of extraskeletal myxoid chondrosarcoma. Four cases showed no or minimal atypia, 6 showed focal pleomorphism, and 5 had necrosis. Mitotic indices varied, with most tumors not exceeding 5/10 high-power fields. Tumors were immunoreactive for only vimentin and weakly focal for epithelial membrane antigen. Of 9 tumors, 7 were shown to harbor a specific EWSR1-CREB1 fusion by reverse transcription-polymerase chain reaction and direct sequencing, with 7 of 10 showing EWSR1 rearrangement by fluorescence in situ hybridization. This gene fusion has been described previously in 2 histologically and behaviorally different sarcomas: clear cell sarcoma-like tumors of the gastrointestinal tract and angiomatoid fibrous histiocytomas; however, this is a novel finding in tumors with the morphology we describe and that occur in the pulmonary region.

Le sommeil comme marqueur du déclin cognitif dans la maladie de Parkinson

La maladie de Parkinson (MP) est une maladie neurodégénérative qui se caractérise principalement par la présence de symptômes moteurs. Cependant, d’autres symptômes, dits non moteurs, sont fréquents dans la MP et assombrissent le pronostic; ceux ci incluent notamment les désordres du sommeil et les troubles cognitifs. De fait, sur une période de plus de 10 ans, jusqu’à 90 % des patients avec la MP développeraient une démence. L’identification de marqueurs de la démence dans la MP est donc primordiale pour permettre le diagnostic précoce et favoriser le développement d’approches thérapeutiques préventives. Plusieurs études ont mis en évidence la contribution du sommeil dans les processus de plasticité cérébrale, d’apprentissage et de consolidation mnésique, notamment l’importance des ondes lentes (OL) et des fuseaux de sommeil (FS). Très peu de travaux se sont intéressés aux liens entre les modifications de la microarchitecture du sommeil et le déclin cognitif dans la MP. L’objectif de cette thèse est de déterminer, sur le plan longitudinal, si certains marqueurs électroencéphalographiques (EEG) en sommeil peuvent prédire la progression vers la démence chez des patients atteints de la MP. La première étude a évalué les caractéristiques des OL et des FS durant le sommeil lent chez les patients avec la MP selon qu’ils ont développé ou non une démence (MP démence vs MP sans démence) lors du suivi longitudinal, ainsi que chez des sujets contrôles en santé. Comparativement aux patients MP sans démence et aux sujets contrôles, les patients MP démence présentaient au temps de base une diminution de la densité, de l’amplitude et de la fréquence des FS. La diminution de l’amplitude des FS dans les régions postérieures était associée à de moins bonnes performances aux tâches visuospatiales chez les patients MP démence. Bien que l’amplitude des OL soit diminuée chez les deux groupes de patients avec la MP, celle ci n’était pas associée au statut cognitif lors du suivi. La deuxième étude a évalué les marqueurs spectraux du développement de la démence dans la MP à l’aide de l’analyse quantifiée de l’EEG en sommeil lent, en sommeil paradoxal et à l’éveil. Les patients MP démence présentaient une diminution de la puissance spectrale sigma durant le sommeil lent dans les régions pariétales comparativement aux patients MP sans démence et aux contrôles. Durant le sommeil paradoxal, l’augmentation de la puissance spectrale en delta et en thêta, de même qu’un plus grand ratio de ralentissement de l’EEG, caractérisé par un rapport plus élevé des basses fréquences sur les hautes fréquences, était associée au développement de la démence chez les patients avec la MP. D’ailleurs, dans la cohorte de patients, un plus grand ralentissement de l’EEG en sommeil paradoxal dans les régions temporo occipitales était associé à des performances cognitives moindres aux épreuves visuospatiales. Enfin, durant l’éveil, les patients MP démence présentaient au temps de base une augmentation de la puissance spectrale delta, un plus grand ratio de ralentissement de l’EEG ainsi qu’une diminution de la fréquence dominante occipitale alpha comparativement aux patients MP sans démence et aux contrôles. Cette thèse suggère que des anomalies EEG spécifiques durant le sommeil et l’éveil peuvent identifier les patients avec la MP qui vont développer une démence quelques années plus tard. L’activité des FS, ainsi que le ralentissement de l’EEG en sommeil paradoxal et à l’éveil, pourraient donc servir de marqueurs potentiels du développement de la démence dans la MP.

The Performance Characteristics of a Surface-Modified Cutting Tool

In the past, many papers have been presented which show that the coating of cutting tools often yields decreased wear rates and reduced coefficients of friction. Although different theories are proposed, covering areas such as hardness theory, diffusion barrier theory, thermal barrier theory, and reduced friction theory, most have not dealt with the question of how and why the coating of tool substrates with hard materials such as Titanium Nitride (TiN), Titanium Carbide (TiC) and Aluminium Oxide (Al203) transforms the performance and life of cutting tools. This project discusses the complex interrelationship that encompasses the thermal barrier function and the relatively low sliding friction coefficient of TiN on an undulating tool surface, and presents the result of an investigation into the cutting characteristics and performance of EDMed surface-modified carbide cutting tool inserts. The tool inserts were coated with TiN by the physical vapour deposition (PVD) method. PVD coating is also known as Ion-plating which is the general term of the coating method in which the film is created by attracting ionized metal vapour in this the metal was Titanium and ionized gas onto negatively biased substrate surface. Coating by PVD was chosen because it is done at a temperature of not more than 5000C whereas chemical Vapour Deposition CVD process is done at very high temperature of about 8500C and in two stages of heating up the substrates. The high temperatures involved in CVD affects the strength of the (tool) substrates. In this study, comparative cutting tests using TiN-coated control specimens with no EDM surface structures and TiN-coated EDMed tools with a crater-like surface topography were carried out on mild steel grade EN-3. Various cutting speeds were investigated, up to an increase of 40% of the tool manufacturer’s recommended speed. Fifteen minutes of cutting were carried out for each insert at the speeds investigated. Conventional tool inserts normally have a tool life of approximately 15 minutes of cutting. After every five cuts (passes) microscopic pictures of the tool wear profiles were taken, in order to monitor the progressive wear on the rake face and on the flank of the insert. The power load was monitored for each cut taken using an on-board meter on the CNC machine to establish the amount of power needed for each stage of operation. The spindle drive for the machine is an 11 KW/hr motor. Results obtained confirmed the advantages of cutting at all speeds investigated using EDMed coated inserts, in terms of reduced tool wear and low power loads. Moreover, the surface finish on the workpiece was consistently better for the EDMed inserts. The thesis discusses the relevance of the finite element method in the analysis of metal cutting processes, so that metal machinists can design, manufacture and deliver goods (tools) to the market quickly and on time without going through the hassle of trial and error approach for new products. Improvements in manufacturing technologies require better knowledge of modelling metal cutting processes. Technically the use of computational models has a great value in reducing or even eliminating the number of experiments traditionally used for tool design, process selection, machinability evaluation, and chip breakage investigations. In this work, much interest in theoretical and experimental investigations of metal machining were given special attention. Finite element analysis (FEA) was given priority in this study to predict tool wear and coating deformations during machining. Particular attention was devoted to the complicated mechanisms usually associated with metal cutting, such as interfacial friction; heat generated due to friction and severe strain in the cutting region, and high strain rates. It is therefore concluded that Roughened contact surface comprising of peaks and valleys coated with hard materials (TiN) provide wear-resisting properties as the coatings get entrapped in the valleys and help reduce friction at chip-tool interface. The contributions to knowledge: a. Relates to a wear-resisting surface structure for application in contact surfaces and structures in metal cutting and forming tools with ability to give wear-resisting surface profile. b. Provide technique for designing tool with roughened surface comprising of peaks and valleys covered in conformal coating with a material such as TiN, TiC etc which is wear-resisting structure with surface roughness profile compose of valleys which entrap residual coating material during wear thereby enabling the entrapped coating material to give improved wear resistance. c. Provide knowledge for increased tool life through wear resistance, hardness and chemical stability at high temperatures because of reduced friction at the tool-chip and work-tool interfaces due to tool coating, which leads to reduced heat generation at the cutting zones. d. Establishes that Undulating surface topographies on cutting tips tend to hold coating materials longer in the valleys, thus giving enhanced protection to the tool and the tool can cut faster by 40% and last 60% longer than conventional tools on the markets today.

Osteossarcoma, quimioterapia HDMTX e reflexos laboratoriais

O osteossarcoma ou sarcoma osteogénico (OS) é o tumor maligno primário mais comum de origem óssea que ocorre em crianças e adultos jovens. Este tumor surge a partir de células mesenquimais e é histologicamente caracterizado pela presença de células fusiformes e formação aberrante de osteóide. A incidência desta neoplasia apresenta uma distribuição bimodal, com um primeiro pico na adolescência e um segundo pico a ocorrer entre a 6ª e a 7ª década de vida. A maioria dos pacientes apresenta doença localizada à data do diagnóstico, e destes, aproximadamente 15 a 20% apresentam metástases detectáveis, em especial, pulmonares. A abordagem terapêutica ao OS engloba quimioterapia pré-operatória (neoadjuvante) seguida de ressecção cirúrgica do tumor primário e de todas as metástases visíveis e de quimioterapia pós-operatória (adjuvante). Historicamente, muitos agentes foram testados e usados no tratamento do OS, mas desde os anos 90 até à actualidade, o esquema de tratamento baseia-se na utilização de três agentes: Metotrexato (MTX), Doxorrubicina (A) e Ciclofosfamida (P), podendo ou não ser incluído um 4º agente, a Ifosfamida (I) ou o Ectopósido (E). Para surtir efeito, o MTX é administrado em alta dose, habitualmente de 12g/m2, podendo ir até 20g/m2, apresentando vários efeitos adversos. Como tal, outros agentes quimioterápicos têm sido testados, assim como outros tipos de tratamento e alvos, com o intuito de melhorar a performance e a sobrevida sem recorrência. A identificação de biomarcadores que permitam o diagnóstico, prognóstico e monitorização da terapia tem sido outra das principais linhas de investigação relacionadas com o OS. O objetivo deste trabalho centra-se na revisão da importância do tratamento neoadjuvante enquanto fator prognóstico do OS, e da monitorização laboratorial na utilização do MTX por forma a evitar efeitos secundários.

Osteossarcoma, quimioterapia HDMTX e reflexos laboratoriais

O osteossarcoma ou sarcoma osteogénico (OS) é o tumor maligno primário mais comum de origem óssea que ocorre em crianças e adultos jovens. Este tumor surge a partir de células mesenquimais e é histologicamente caracterizado pela presença de células fusiformes e formação aberrante de osteóide. A incidência desta neoplasia apresenta uma distribuição bimodal, com um primeiro pico na adolescência e um segundo pico a ocorrer entre a 6ª e a 7ª década de vida. A maioria dos pacientes apresenta doença localizada à data do diagnóstico, e destes, aproximadamente 15 a 20% apresentam metástases detectáveis, em especial, pulmonares. A abordagem terapêutica ao OS engloba quimioterapia pré-operatória (neoadjuvante) seguida de ressecção cirúrgica do tumor primário e de todas as metástases visíveis e de quimioterapia pós-operatória (adjuvante). Historicamente, muitos agentes foram testados e usados no tratamento do OS, mas desde os anos 90 até à actualidade, o esquema de tratamento baseia-se na utilização de três agentes: Metotrexato (MTX), Doxorrubicina (A) e Ciclofosfamida (P), podendo ou não ser incluído um 4º agente, a Ifosfamida (I) ou o Ectopósido (E). Para surtir efeito, o MTX é administrado em alta dose, habitualmente de 12g/m2, podendo ir até 20g/m2, apresentando vários efeitos adversos. Como tal, outros agentes quimioterápicos têm sido testados, assim como outros tipos de tratamento e alvos, com o intuito de melhorar a performance e a sobrevida sem recorrência. A identificação de biomarcadores que permitam o diagnóstico, prognóstico e monitorização da terapia tem sido outra das principais linhas de investigação relacionadas com o OS. O objetivo deste trabalho centra-se na revisão da importância do tratamento neoadjuvante enquanto fator prognóstico do OS, e da monitorização laboratorial na utilização do MTX por forma a evitar efeitos secundários.

Regulation of mitotic BubR1 phosphorylation by the BubR1 pseudokinase domain

BubR1 est une protéine importante dans le point de contrôle de la mitose pour la stabilisation des interactions entre kinétochores et microtubules (KT-MT). Ces fonctions protègent de la ségrégation anormale des chromosomes et de l’instabilité du génome. BubR1 possède des sites de phosphorylation mitotique hautement conservés dans le domaine régulant l’attachement des kinétochores (KARD), où S676 et S670 sont phosphorylées respectivement par la kinase polo-like 1 (Plk1) et par la kinase cycline-dépendante 1 (Cdk1). Ces sites de phosphorylation sont essentiels pour le recrutement de la phosphatase PP2A-B56, qui stabilise les interactions KT-MT. Nos résultats montrent que la délétion entière ou des mutations qui déstabilisent le domaine pseudokinase de BubR1, causent la perte de phosphorylation des résidus S676 et S670 en mitose. Notre hypothèse est que le domaine pseudokinase de BubR1 peut jouer un rôle essentiel dans la régulation de la phosphorylation du KARD et donc dans la stabilisation des interactions KT-MT.

Applications for nanomaterials in critical technologies

This thesis is devoted to the development, synthesis, properties, and applications of nano materials for critical technologies, including three areas: (1) Microbial contamination of drinking water is a serious problem of global significance. About 51% of the waterborne disease outbreaks in the United States can be attributed to contaminated ground water. Development of metal oxide nanoparticles, as viricidal materials is of technological and fundamental scientific importance. Nanoparticles with high surface areas and ultra small particle sizes have dramatically enhanced efficiency and capacity of virus inactivation, which cannot be achieved by their bulk counterparts. A series of metal oxide nanoparticles, such as iron oxide nanoparticles, zinc oxide nanoparticles and iron oxide-silver nanoparticles, coated on fiber substrates was developed in this research for evaluation of their viricidal activity. We also carried out XRD, TEM, SEM, XPS, surface area measurements, and zeta potential of these nanoparticles. MS2 virus inactivation experiments showed that these metal oxide nanoparticle coated fibers were extremely powerful viricidal materials. Results from this research suggest that zinc oxide nanoparticles with diameter of 3.5 nm, showing an isoelectric point (IEP) at 9.0, were well dispersed on fiberglass. These fibers offer an increase in capacity by orders of magnitude over all other materials. Compared to iron oxide nanoparticles, zinc oxide nanoparticles didn’t show an improvement in inactivation kinetics but inactivation capacities did increase by two orders of magnitude to 99.99%. Furthermore, zinc oxide nanoparticles have higher affinity to viruses than the iron oxide nanoparticles in presence of competing ions. The advantages of zinc oxide depend on high surface charge density, small nanoparticle sizes and capabilities of generating reactive oxygen species. The research at its present stage of development appears to offer the best avenue to remove viruses from water. Without additional chemicals and energy input, this system can be implemented by both points of use (POU) and large-scale use water treatment technology, which will have a significant impact on the water purification industry. (2) A new family of aliphatic polyester lubricants has been developed for use in micro-electromechanical systems (MEMS), specifically for hard disk drives that operate at high spindle speeds (>15000rpm). Our program was initiated to address current problems with spin-off of the perfluoroether (PFPE) lubricants. The new polyester lubricant appears to alleviate spin-off problems and at the same time improves the chemical and thermal stability. This new system provides a low cost alternative to PFPE along with improved adhesion to the substrates. In addition, it displays a much lower viscosity, which may be of importance to stiction related problems. The synthetic route is readily scalable in case additional interest emerges in other areas including small motors. (3) The demand for increased signal transmission speed and device density for the next generation of multilevel integrated circuits has placed stringent demands on materials performance. Currently, integration of the ultra low-k materials in dual Damascene processing requires chemical mechanical polishing (CMP) to planarize the copper. Unfortunately, none of the commercially proposed dielectric candidates display the desired mechanical and thermal properties for successful CMP. A new polydiacetylene thermosetting polymer (DEB-TEB), which displays a low dielectric constant (low-k) of 2.7, was recently developed. This novel material appears to offer the only avenue for designing an ultra low k dielectric (1.85k), which can still display the desired modulus (7.7Gpa) and hardness (2.0Gpa) sufficient to withstand the process of CMP. We focused on further characterization of the thermal properties of spin-on poly (DEB-TEB) ultra-thin film. These include the coefficient of thermal expansion (CTE), biaxial thermal stress, and thermal conductivity. Thus the CTE is 2.0*10-5K-1 in the perpendicular direction and 8.0*10-6 K-1 in the planar direction. The low CTE provides a better match to the Si substrate which minimizes interfacial stress and greatly enhances the reliability of the microprocessors. Initial experiments with oxygen plasma etching suggest a high probability of success for achieving vertical profiles.

Le sommeil comme marqueur du déclin cognitif dans la maladie de Parkinson

La maladie de Parkinson (MP) est une maladie neurodégénérative qui se caractérise principalement par la présence de symptômes moteurs. Cependant, d’autres symptômes, dits non moteurs, sont fréquents dans la MP et assombrissent le pronostic; ceux ci incluent notamment les désordres du sommeil et les troubles cognitifs. De fait, sur une période de plus de 10 ans, jusqu’à 90 % des patients avec la MP développeraient une démence. L’identification de marqueurs de la démence dans la MP est donc primordiale pour permettre le diagnostic précoce et favoriser le développement d’approches thérapeutiques préventives. Plusieurs études ont mis en évidence la contribution du sommeil dans les processus de plasticité cérébrale, d’apprentissage et de consolidation mnésique, notamment l’importance des ondes lentes (OL) et des fuseaux de sommeil (FS). Très peu de travaux se sont intéressés aux liens entre les modifications de la microarchitecture du sommeil et le déclin cognitif dans la MP. L’objectif de cette thèse est de déterminer, sur le plan longitudinal, si certains marqueurs électroencéphalographiques (EEG) en sommeil peuvent prédire la progression vers la démence chez des patients atteints de la MP. La première étude a évalué les caractéristiques des OL et des FS durant le sommeil lent chez les patients avec la MP selon qu’ils ont développé ou non une démence (MP démence vs MP sans démence) lors du suivi longitudinal, ainsi que chez des sujets contrôles en santé. Comparativement aux patients MP sans démence et aux sujets contrôles, les patients MP démence présentaient au temps de base une diminution de la densité, de l’amplitude et de la fréquence des FS. La diminution de l’amplitude des FS dans les régions postérieures était associée à de moins bonnes performances aux tâches visuospatiales chez les patients MP démence. Bien que l’amplitude des OL soit diminuée chez les deux groupes de patients avec la MP, celle ci n’était pas associée au statut cognitif lors du suivi. La deuxième étude a évalué les marqueurs spectraux du développement de la démence dans la MP à l’aide de l’analyse quantifiée de l’EEG en sommeil lent, en sommeil paradoxal et à l’éveil. Les patients MP démence présentaient une diminution de la puissance spectrale sigma durant le sommeil lent dans les régions pariétales comparativement aux patients MP sans démence et aux contrôles. Durant le sommeil paradoxal, l’augmentation de la puissance spectrale en delta et en thêta, de même qu’un plus grand ratio de ralentissement de l’EEG, caractérisé par un rapport plus élevé des basses fréquences sur les hautes fréquences, était associée au développement de la démence chez les patients avec la MP. D’ailleurs, dans la cohorte de patients, un plus grand ralentissement de l’EEG en sommeil paradoxal dans les régions temporo occipitales était associé à des performances cognitives moindres aux épreuves visuospatiales. Enfin, durant l’éveil, les patients MP démence présentaient au temps de base une augmentation de la puissance spectrale delta, un plus grand ratio de ralentissement de l’EEG ainsi qu’une diminution de la fréquence dominante occipitale alpha comparativement aux patients MP sans démence et aux contrôles. Cette thèse suggère que des anomalies EEG spécifiques durant le sommeil et l’éveil peuvent identifier les patients avec la MP qui vont développer une démence quelques années plus tard. L’activité des FS, ainsi que le ralentissement de l’EEG en sommeil paradoxal et à l’éveil, pourraient donc servir de marqueurs potentiels du développement de la démence dans la MP.

Chatter avoidance in the milling of thin floors with bull-nose end mills: Model and stability diagrams

The milling of thin parts is a high added value operation where the machinist has to face the chatter problem. The study of the stability of these operations is a complex task due to the changing modal parameters as the part loses mass during the machining and the complex shape of the tools that are used. The present work proposes a methodology for chatter avoidance in the milling of flexible thin floors with a bull-nose end mill. First, a stability model for the milling of compliant systems in the tool axis direction with bull-nose end mills is presented. The contribution is the averaging method used to be able to use a linear model to predict the stability of the operation. Then, the procedure for the calculation of stability diagrams for the milling of thin floors is presented. The method is based on the estimation of the modal parameters of the part and the corresponding stability lobes during the machining. As in thin floor milling the depth of cut is already defined by the floor thickness previous to milling, the use of stability diagrams that relate the tool position along the tool-path with the spindle speed is proposed. Hence, the sequence of spindle speeds that the tool must have during the milling can be selected. Finally, this methodology has been validated by means of experimental tests.

Estudo da função da proteína Mob1 na estrutura dos centrossomas

Dissertação de Mestrado, Oncobiologia - Mecanismos Moleculares do Cancro, Departamento de Ciências Biomédicas e Medicina, Universidade do Algarve, 2016

Investigation on the effect of cutting fluid pressure on surface quality measurement in high speed thread milling of brass alloy (C3600) and aluminium alloy (5083)

The quality of a machined finish plays a major role in the performance of milling operations, good surface quality can significantly improve fatigue strength, corrosion resistance, or creep behaviour as well as surface friction. In this study, the effect of cutting parameters and cutting fluid pressure on the quality measurement of the surface of the crest for threads milled during high speed milling operations has been scrutinised. Cutting fluid pressure, feed rate and spindle speed were the input parameters whilst minimising surface roughness on the crest of the thread was the target. The experimental study was designed using the Taguchi L32 array. Analysing and modelling the effective parameters were carried out using both a multi-layer perceptron (MLP) and radial basis function (RBF) artificial neural networks (ANNs). These were shown to be highly adept for such tasks. In this paper, the analysis of surface roughness at the crest of the thread in high speed thread milling using a high accuracy optical profile-meter is an original contribution to the literature. The experimental results demonstrated that the surface quality in the crest of the thread was improved by increasing cutting speed, feed rate ranging 0.41-0.45 m/min and cutting fluid pressure ranging 2-3.5 bars. These outcomes characterised the ANN as a promising application for surface profile modelling in precision machining.

Understanding the role of CAP proteins in the polarization process of C. elegans

La division cellulaire asymétrique est un processus crucial dans le développement des organismes multicellulaires puisqu’elle permet la génération de la diversité cellulaire. Les cellules qui se divisent de façon asymétrique doivent tout d’abord se polariser et correctement orienter leur fuseau mitotique pour ségréger des déterminants cellulaires en deux entités distinctes. L’embryon du nématode C. elegans est un modèle robuste et largement utilisé pour étudier la division cellulaire asymétrique. Dans cet embryon, le point d'entrée du spermatozoïde détermine l'axe de polarité antéro-postérieur. Suite à la fécondation, le cortex embryonnaire est uniformément contractile et un complexe conservé formé des protéines PAR-3, PAR-6 et PKC-3 (nommé complexe PAR-3 ci-dessous) est localisé sur l'ensemble du cortex. La complétion de la méiose maternelle induit une relaxation corticale au postétieur et un flux cortical vers l’antérieur de l’embryon. Ces contractions corticales asymétriques mènent à la formation d'un domaine antérieur contenant le complexe PAR-3, tandis que le cortex postérieur, dont le complexe PAR-3 s’est délocalisé, est enrichi avec les protéines PAR-2 et PAR-1. Par conséquent, les domaines formés par les protéines PAR définissent un pôle antérieur et un pôle postérieur dans l'embryon suite au remodelage du cytosquelette. Les protéines PAR-4 et PAR-5 restent localisées de façon uniforme dans l'embryon. Curieusement, les protéines PAR exercent une régulation par rétroaction sur la contractilité corticale. Il a été montré qu’une des protéines PAR récemment identifiée, PAR-5, est orthologue à la protéine adaptatrice 14-3-3 et joue un rôle important dans la contractilité corticale. En dépit de son rôle central dans la contractilité corticale et le processus de polarisation cellulaire, le mécanisme par lequel PAR-5 régule la contractilité corticale n’est pas bien compris. Le but de ce projet est de mieux comprendre comment PAR-5 et ses interacteurs contrôlent la régulation des contractions corticales et, de ce fait, la polarité cellulaire. Dans un essai de capture de la protéine GST (GST pull-down), nous avons identifié plusieurs nouveaux interacteurs de PAR-5. Parmi ceux-ci, nous avons trouvé CAP-2 (protéine de coiffage de l'actine), qui a été identifiée dans des éxpériences de capture de 14-3-3 dans trois systèmes modèles différents. CAP-2 est un hétérodimère des protéines CAP, qui sont impliquées dans la régulation de l'actine. Nous avons trouvé que la déplétion des protéines CAP par interférence à l’ARN dans des vers de type sauvage mène à une augmentation létalité embryonnaire, ce qui suggère que ces protéines jouent un rôle important dans le développement embryonnaire. L'imagerie en temps réel d'embryons déplétés pour les protéines CAP montre qu’ils ont une diminution des contractions corticales avec un sillon de pseudoclivage mois stable, suggérant un défaut dans la régulation du cytosquelette d'actine-myosine. Ceci a également été confirmé par la diminution de la vitesse et du nombre de foci de NMY-2::GFP. En outre, ces embryons montrent une légère diminution de la taille du croissant cortical de PAR-2 lors de la phase d’établissement de la polarité. Les embryons déplétés en CAP-2 montrent également un retard dans la progression du cycle cellulaire, mais le lien entre ce phénotype et la régulation des contractions corticales reste à être précisé. La caractérisation des protéines CAP, des régulateurs du remodelage du cytosquelette, permettra d'améliorer notre compréhension des mécanismes qui sous-tendent l'établissement et le maintien de la polarité cellulaire, et donc la division cellulaire asymétrique.