Multi-Objective and Financial Portfolio Optimization of Carrier-Sense Multiple Access Protocols with Cooperative Diversity

8th International Workshop on Multiple Access Communications (MACOM2015), Helsinki, Finland.

Interoperability on low power devices

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

Web-assisted tobacco intervention in Portuguese : intentions to make behavioural changes and behavioural changes

ABSTRACT - The problem of how to support “intentions to make behavioural changes” (IBC) and “behaviour changes” (BC) in smoking cessation when there is a scarcity of resources is a pressing issue in public health terms. The present research focuses on the use of information and communications technologies and their role in smoking cessation. It is developed in Portugal after the ratification of WHO Framework Convention on Tobacco Control (on 8 November 2005). The prevalence of smokers over fifteen years of age within the population stood at 20.9% (30.9% for men and 11.8% for women). While the strategy of helping people to quit smoking has been emphasised at National Health Service (NHS) level, the uptake of cessation assistance has exceeded the capacity of the service. This induced the search of new theoretical and practical venues to offer alternative options to people willing to stop smoking. Among these, the National Health Plan (NHP) of Portugal (2004-2010), identifies the use of information technologies in smoking cessation. eHealth and the importance of health literacy as a means of empowering people to make behavioural changes is recurrently considered an option worth investigating. The overall objective of this research is to understand, in the Portuguese context, the use of the Internet to help people to stop smoking. Research questions consider factors that may contribute to “intentions to make behavioural changes” (IBC) and “behavioural changes” (BC) while using a Web-Assisted Tobacco Intervention Probe (WATIP). Also consideration is given to the trade-off on the use of the Web as a tool for smoking cessation: can it reach a vast number of people for a small cost (efficiency) demonstrating to work in the domain of smoking cessation (efficacy)”? In addition to the introduction, there is a second chapter in which the use of tobacco is discussed as a public health menace. The health gains achieved by stopping smoking and the means of quitting are also examined, as is the use of the Internet in smoking cessation. Then, several research issues are introduced. These include background theory and the theoretical framework for the Sense of Coherence. The research model is also discussed. A presentation of the methods, materials and of the Web-Assisted Tobacco Intervention Probe (WATIP) follows. In chapter four the results of the use of the Web-Assisted Tobacco Intervention Probe (WATIP) are presented. This study is divided into two sections. The first describes results related to quality control in relation to the Web-Assisted Tobacco Intervention Probe (WATIP) and gives an overview of its users. Of these, 3,150 answered initial eligibility questions. In the end, 1,463 met all eligibility requirements, completed intake, decided on a day to quit smoking (Dday) and declared their “intentions to make behavioural changes” (IBC) while a second targeted group of 650 did not decide on a Dday. With two quit attempts made before joining the platform, most of the participants had experienced past failures while wanting to stop. The smoking rate averaged 21 cigarettes per day. With a mean age of 35, of the participants 55% were males. Among several other considerations, gender and the Sense of Coherence (SOC) influenced the success of participants in their IBC and endeavour to set quit dates. The results of comparing males and females showed that, for current smokers, establishing a Dday was related to gender differences, not favouring males (OR=0.76, p<0.005). Belonging to higher Socio-economic strata (SES) was associated with the intention to consider IBC (when compared to lower SES condition) (OR=1.57, p<0.001) and higher number of school years (OR=0.70, p<0.005) favoured the decision to smoking cessation. Those who demonstrated higher confidence in their likelihood of success in stopping in the shortest time had a higher rate of setting a Dday (OR=0.51, p<0.001). There were differences between groups in IBC reflecting the high and low levels of the SOC score (OR=1.43, p=0.006), as those who considered setting a Dday had higher levels of SOC. After adjusting for all variables, stages of readiness to change and SOC were kept in the model. This is the first Arm of this research where the focus is a discussion of the system’s implications for the participants’ “intentions to make behavioural changes” (IBC). Moreover, a second section of this study (second Arm) offers input collected from 77 in-depth interviews with the Web-Assisted Tobacco Intervention Probe (WATIP) users. Here, “Behaviour Change” (BC) and the usability of the platform are explored a year after IBC was declared. A percentage of 32.9% of self-reported, 12-month quitters in continuous abstinence from smoking from Dday to the 12-month follow- up point of the use of the Web-Assisted Tobacco Intervention Probe (WATIP) has been assessed. Comparing the Sense of Coherence (SOC) scores of participants by their respective means, according to the two groups, there was a significant difference in these scores of non smokers (BC) (M=144,66, SD=22,52) and Sense of Coherence (SOC) of smokers (noBC) (M=131,51, SD=21,43) p=0.014. This WATIP strategy and its contents benefit from the strengthening of the smoker’s sense of coherence (SOC), so that the person’s progress towards a life without tobacco may be experienced as comprehensible, manageable and meaningful. In this sample the sense of coherence (SOC) effect is moderate although it is associated with the day to quit smoking (Dday). Some of the limitations of this research have to do with self-selection bias, sample size (power) and self-reporting (no biochemical validation). The enrolment of participants was therefore not representative of the smoking population. It is not possible to verify the Web-Assisted Tobacco Intervention Probe (WATIP) evaluation of external validity; consequently, the results obtained cannot be applied generalized. No participation bias is provided. Another limitation of this study is the associated limitations of interviews. Interviewees’ perception that fabricating answers could benefit them more than telling the simple truth in response to questions is a risk that is not evaluated (with no external validation like measuring participants’ carbon monoxide levels). What emerges in this analysis is the relevance of the process that leads to the establishment of the quit day (Dday) to stop using tobacco. In addition, technological issues, when tailoring is the focus, are key elements for scrutiny. The high number of dropouts of users of the web platform mandates future research that should concentrate on the matters of the user-centred design of portals. The focus on gains in health through patient-centred care needs more research, so that technology usability be considered within the context of best practices in smoking cessation.

Development and efficiency optimizing of the human body energy converters

Nowadays it is known that the human body is continuous source of many types of energy and the devices used for collecting energy taken from the environment also have the required capabilities for the collection of the energy produced by the Human body (HB), but very limited and with very low efficiency. Low power and high yield converters are particularly needed in these cases of collecting energy from human activity and its movements due to the small amount of energy generated this way. But this situation can be improved. Enhancing or focusing the human movements by using mechanical amplifiers applied to the piezoelectric element. By doing so the input of energy in the element increases. As such increasing its output, therefore producing more energy.

Influence of Lean and Green on supply chain performance: an interpretive structural modelling model

This work aims to identify and rank a set of Lean and Green practices and supply chain performance measures on which managers should focus to achieve competitiveness and improve the performance of automotive supply chains. The identification of the contextual relationships among the suggested practices and measures, was performed through literature review. Their ranking was done by interviews with professionals from the automotive industry and academics with wide knowledge on the subject. The methodology of interpretive structural modelling (ISM) is a useful methodology to identify inter relationships among Lean and Green practices and supply chain performance measures and to support the evaluation of automotive supply chain performance. Using the ISM methodology, the variables under study were clustered according to their driving power and dependence power. The ISM methodology was proposed to be used in this work. The model intends to provide a better understanding of the variables that have more influence (driving variables), the others and those which are most influenced (dependent variables) by others. The information provided by this model is strategic for managers who can use it to identify which variables they should focus on in order to have competitive supply chains.

Switching mode power amplifier for bluetooth applications

Modern fully integrated transceivers architectures, require circuits with low area, low cost, low power, and high efficiency. A key block in modern transceivers is the power amplifier, which is deeply studied in this thesis. First, we study the implementation of a classical Class-A amplifier, describing the basic operation of an RF power amplifier, and analysing the influence of the real models of the reactive components in its operation. Secondly, the Class-E amplifier is deeply studied. The different types of implementations are reviewed and theoretical equations are derived and compared with simulations. There were selected four modes of operation for the Class-E amplifier, in order to perform the implementation of the output stage, and the subsequent comparison of results. This led to the selection of the mode with the best trade-off between efficiency and harmonics distortion, lower power consumption and higher output power. The optimal choice was a parallel circuit containing an inductor with a finite value. To complete the implementation of the PA in switching mode, a driver was implemented. The final block (output stage together with the driver) got 20 % total efficiency (PAE) transmitting 8 dBm output power to a 50 W load with a total harmonic distortion (THD) of 3 % and a total consumption of 28 mW. All implementations are designed using standard 130 nm CMOS technology. The operating frequency is 2.4 GHz and it was considered an 1.2 V DC power supply. The proposed circuit is intended to be used in a Bluetooth transmitter, however, it has a wider range of applications.

Three-phase current-source shunt active power filter with solar photovoltaic grid interface

This paper presents the proposal of a three phase current source shunt active power filter (CS-SAPF) with photovoltaic grid interface. The proposed system combines the compensation of reactive power and harmonics with the injection of energy from a solar photovoltaic array into the electrical power grid. The proposed equipment presents the advantage of giving good use to the current source inverter, even when the solar photovoltaic array is not producing energy. The paper describes the control system of the CS SAPF, the energy injection control strategy, and the current harmonics and power factor compensation strategy. Simulation results to assess the performance of the proposed system are also presented.

Comparative environmental life-cycle analysis of concretes using biomass and coal fly ashes as partial cement replacement material

Nowadays, the concrete production sector is challenged by attempts to minimize the usage of raw materials and energy consumption, as well as by environmental concerns. Therefore, it is necessary to choose better options, e.g. new technologies or materials with improved life-cycle performance. One solution for using resources in an efficient manner is to close the materials' loop through the recycling of materials that result either from the end-of-life of products or from being the by-product of an industrial process. It is well known that the production of Portland cement, one of the materials most used in the construction sector, has a significant contribution to the environmental impacts, mainly related with carbon dioxide emission. Therefore, the study and utilization of by-products or wastes usable as cement replacement in concrete can supply more sustainable options, provided that these type of concrete produced has same durability and equivalent quality properties as standard concrete. This work studied the environmental benefits of incorporating different percentages of two types of fly ashes that can be used in concrete as cement replacement. These ashes are waste products of power and heat production sectors using coal or biomass as fuels. The results showed that both ashes provide a benefit for the concrete production both in terms of environmental impact minimization and a better environmental performance through an increase in cement replacement. It is possible to verify that the incorporation of fly ashes is a sustainable option for cement substitution and a possible path to improve the environmental performance of the concrete industry.

Which soft lens power is better for piggyback in keratoconus? Part II

Purpose: To evaluate how soft lens power affects rigid gas-permeable (RGP) lens power and visual acuity (VA) in piggyback fittings for keratoconus. Methods: Sixteen keratoconus subjects (30 eyes) were included in the study. Piggyback contact lens fittings combining Senofilcon-A soft lenses of −6.00, −3.00, +3.00 and +6.00 D with Rose K2 RGP contact lenses were performed. Corneal topography was taken on the naked eye and over each soft contact lens before fitting RGP lenses. Mean central keratometry, over-refraction, RGP back optic zone radius (BOZR) and estimated final power as well as VA were recorded and analyzed. Results: In comparison to the naked eye, the mean central keratometry flattened with both negative lens powers (p < 0.05 in all cases), did not change with the +3.00 soft lens power (p = 1.0); and steepened with the +6.00 soft lens power (p = 0.02). Rigid gas-permeable over-refraction did not change significantly between different soft lens powers (all p > 0.05). RGP’s BOZR decreased significantly with both positive in comparison with both negative soft lens powers (all p < 0.001), but no significant differences were found among negative- or positive-powers separately (both p > 0.05). Estimated RGP’s final power increased significantly with positive in comparison with negative lens powers (all p < 0.001), but no significant differences were found among negative or positive lens powers separately (both p > 0.05). Visual acuity did not change significantly between the different soft lens powers assessed (all p > 0.05). Conclusion: The use of negative-powered soft lenses in piggyback fitting reduces RGP lens power without impacting VA in keratoconus subjects.

Brazil's global aspirations and their implications for the relationship with Argentina in the framework of MERCOSUR

Dissertação de mestrado em Relações Internacionais

Anatomical and energy characteristics of charcoal made from five species

Charcoal is an important energy raw material and its properties are influenced by the wood's anatomical and chemical composition and the production process. The aim of this study was to evaluate the anatomical characteristics, calorific power and volatiles and ash content of carbonized wood from Byrsonima spicata, Calophyllum brasiliense, Cecropia sciadophylla, Cochlospermum orinocense and Schefflera morototoni. The calorific power varied from 26,878 to 31,117 kJ kg-1; the content of volatile materials ranged from 20.9 to 31.7%; ash content ranged from 0.1 to 3.8%; and carbon content varied from 68.2 to 75.3%. Anatomical structures of charcoal can be used for species identification. The studied species are not indicated for charcoal production because the levels of ash and volatile compounds are higher than those recommended for charcoal produced for household use. In addition, the calorific power and level of carbon content are insufficient for use in the steel industry.

Nutritional value, bioactive compounds and antioxidant properties of three edible mushrooms from Poland

Mushrooms contain a multitude of biomolecules with nutritional and/or biological activity. Among the bioactive molecules, phenolic compounds and tocopherols are the most responsible for their antioxidant activity. In the present work, Boletus edulis, Lentinus edodes and Xerocomus badius, three edible mushroom species originated from Poland, were analyzed for their chemical composition and antioxidant activity. Carbohydrates were the most abundant macronutrients, followed by proteins and ash. Fructose, mannitol and trehalose were the prevalent sugars, but glucose was only found in B. edulis. Polyunsaturated fatty acids predominated over mono and saturated fatty acids. Palmitic, oleic and linoleic acids were abundant in the three samples. α- and β- Tocopherols were quantified in all the samples, but γ-tocopherol was only identified in X. badius. Oxalic and fumaric acids were quantified in the three samples; quinic acid was only present in L. edodes, and malic and citric acids were only found in X. badius. p-Hydroxybenzoic, protocatechuic and cinnamic acids were quantified in all the species, while p-coumaric acid was only found in B. edulis. This species and X. badius revealed the highest antioxidant properties, being B. edulis more effective in radicals scavenging activity and reducing power, and X. badius in lipid peroxidation inhibition, which is related with the highest amounts in phenolic compounds and tocopherols, respectively.

Optimization of magnetoelectric composites based on electroactive polymers for energy harvesting and sensor application

Tese de Doutoramento em Engenharia de Materiais.

China and India’s Maritime Geostrategies:: Implications for International Maritime Security and Scenarios for 2030

Dissertação de Mestrado em Estratégia

Personal relations and their effect on behavior in an organizational setting: an experimental study

We study how personal relations affect performance in organizations. In the experimental game we use a manager has to assign different degrees of decision power to two employees. These two employees then have to make distributive decisions which affect themselves and the manager. Our focus is on the effects on managers' assignment of decision power and on employees' distributive decisions of one of the employees and the manager knowing each other personally. Our evidence shows that managers tend to favor employees that they personally know and that these employees tend, more than other employees, to favor the manager in their distributive decisions. However, this behavior does not affect the performance of the employees that do not know the manager. All these effects are independent of whether the employees that know the manager are more or less productive than those who do not know the manager. The results shed light on discrimination and nepotism and its consequences for the performance of family firms and other organizations.