[Livestock owners with specifically increased disease awareness for Bluetongue: A new approach to disease surveillance]

For the first time in Switzerland, specifically trained livestock owners were included in a national disease surveillance program by the Federal Veterinary Office. A questionnaire on data about clinical and epidemiological aspects of Bluetongue Disease (BT) as well as on herd management was completed by 26 sheep owners three months after they had attended a training course about BT. The control group, consisted of 264 randomly selected sheep and cattle owners who had not visited a training course. Results showed that disease awareness for BT after attending the training course was considerably increased. This was especially evident in the better knowledge of the participants about the great number of possible symptoms. Training courses with the objective of increased disease awareness of livestock owners are an efficient, cost-effective instrument in control programs for exotic diseases.

Integrated pest management in multi-story public housing for the elderly in Houston, Texas

Integrated pest management is a viable alternative to traditional pest control methods. A paired sample design was utilized to measure the effect of IPM education on the number of cockroaches in a 200 unit, seven story public housing building for the elderly in Houston, TX. Glue traps were placed in 71 randomly selected apartments (5traps/unit) and left in place for two nights. Baseline cockroach counts were shared with the property manager, maintenance/janitorial staff, service coordinator, pest control professional and tenant representatives at the end of a one day “Integrated Pest Management in Multi-Family Housing” training course.^ There was a significant decrease in the average number of cockroaches after IPM education and implementation of IPM principles (P < 0.0003). Positive changes in behavior by members of the IPM team and changes in the housing authority operational plan were also found. Paired t-tests comparing the difference between mean cockroach counts at baseline and follow-up by location within the apartment all demonstrated a significant decrease in the number of cockroaches.^ Results supported the premise that IPM education and the implementation of IPM principles are effective measures to change pest control behaviors and control cockroaches. Cockroach infestations in multi-story housing are not solely determined by the actions of individual tenants. The actions of other residents, property managers and pest control professionals are also important factors in pest control.^ Findings support the implementation of IPM education and the adoption of IPM practices by public housing authorities. This study adds to existing evidence that clear communication of policies, a team approach and a commitment to ongoing inspection and monitoring of pests combined with corrective action to eliminate food, water and harborage and the judicial use of low risk pesticides have the potential to improve the living conditions of elderly residents living in public housing.^

El estudio de casos en las prácticas de formación de un profesorado de Educación Especial

En el presente trabajo compartimos una experiencia de formación de educadores especiales desde de la Práctica VI: Estudio de Casos del Profesorado de Educación Especial de la Facultad de Ciencias Humanas de la Universidad Nacional de San Luis. El estudio de casos es un método de investigación cualitativa, que en este espacio de formación, se instituye como una estrategia pedagógica para la formación práctica del Profesor de Educación Especial como profesional crítico, dado que posibilita conocer en profundidad una situación educativa en particular, problematizarla y tomar decisiones acerca de las intervenciones educativas. Consideramos que es necesario que los dispositivos de formación den lugar a la reflexión, y que el estudiante pueda situarse de manera activa y comprometido con el obrar desde un posicionamiento subjetivo, teórico y ético - político. En este sentido es que el estudio de casos es una mediación para la formación profesional.

Patrol team language identification system for DARPA RATS P1 evaluation

This paper describes the language identification (LID) system developed by the Patrol team for the first phase of the DARPA RATS (Robust Automatic Transcription of Speech) program, which seeks to advance state of the art detection capabilities on audio from highly degraded communication channels. We show that techniques originally developed for LID on telephone speech (e.g., for the NIST language recognition evaluations) remain effective on the noisy RATS data, provided that careful consideration is applied when designing the training and development sets. In addition, we show significant improvements from the use of Wiener filtering, neural network based and language dependent i-vector modeling, and fusion.

Contribution to flexible service coordination in mobile prosumer environments

Este trabajo de Tesis se desarrolla en el marco de los escenarios de ejecución distribuida de servicios móviles y contribuye a la definición y desarrollo del concepto de usuario prosumer. El usuario prosumer se caracteriza por utilizar su teléfono móvil para crear, proveer y ejecutar servicios. Este nuevo modelo de usuario contribuye al avance de la sociedad de la información, ya que el usuario prosumer se transforma de creador de contenidos a creador de servicios (estos últimos formados por contenidos y la lógica para acceder a ellos, procesarlos y representarlos). El objetivo general de este trabajo de Tesis es la provisión de un modelo de creación, distribución y ejecución de servicios para entorno móvil que permita a los usuarios no programadores (usuarios prosumer), pero expertos en un determinado dominio, crear y ejecutar sus propias aplicaciones y servicios. Para ello se definen, desarrollan e implementan metodologías, procesos, algoritmos y mecanismos adaptables a dominios específicos, para construir entornos de ejecución distribuida de servicios móviles para usuarios prosumer. La provisión de herramientas de creación adaptadas a usuarios no expertos es una tendencia actual que está siendo desarrollada en distintos trabajos de investigación. Sin embargo, no se ha propuesto una metodología de desarrollo de servicios que involucre al usuario prosumer en el proceso de diseño, desarrollo, implementación y validación de servicios. Este trabajo de Tesis realiza un estudio de las metodologías y tecnologías más innovadoras relacionadas con la co‐creación y utiliza este análisis para definir y validar una metodología que habilita al usuario para ser el responsable de la creación de servicios finales. Siendo los entornos móviles prosumer (mobile prosumer environments) una particularización de los entornos de ejecución distribuida de servicios móviles, en este trabajo se tesis se investiga en técnicas de adaptación, distribución, coordinación de servicios y acceso a recursos identificando como requisitos las problemáticas de este tipo de entornos y las características de los usuarios que participan en los mismos. Se contribuye a la adaptación de servicios definiendo un modelo de variabilidad que soporte la interdependencia entre las decisiones de personalización de los usuarios, incorporando mecanismos de guiado y detección de errores. La distribución de servicios se implementa utilizando técnicas de descomposición en árbol SPQR, cuantificando el impacto de separar cualquier servicio en distintos dominios. Considerando el plano de comunicaciones para la coordinación en la ejecución de servicios distribuidos hemos identificado varias problemáticas, como las pérdidas de enlace, conexiones, desconexiones y descubrimiento de participantes, que resolvemos utilizando técnicas de diseminación basadas en publicación subscripción y algoritmos Gossip. Para lograr una ejecución flexible de servicios distribuidos en entorno móvil, soportamos la adaptación a cambios en la disponibilidad de los recursos, proporcionando una infraestructura de comunicaciones para el acceso uniforme y eficiente a recursos. Se han realizado validaciones experimentales para evaluar la viabilidad de las soluciones propuestas, definiendo escenarios de aplicación relevantes (el nuevo universo inteligente, prosumerización de servicios en entornos hospitalarios y emergencias en la web de la cosas). Abstract This Thesis work is developed in the framework of distributed execution of mobile services and contributes to the definition and development of the concept of prosumer user. The prosumer user is characterized by using his mobile phone to create, provide and execute services. This new user model contributes to the advancement of the information society, as the prosumer is transformed from producer of content, to producer of services (consisting of content and logic to access them, process them and represent them). The overall goal of this Thesis work is to provide a model for creation, distribution and execution of services for the mobile environment that enables non‐programmers (prosumer users), but experts in a given domain, to create and execute their own applications and services. For this purpose I define, develop and implement methodologies, processes, algorithms and mechanisms, adapted to specific domains, to build distributed environments for the execution of mobile services for prosumer users. The provision of creation tools adapted to non‐expert users is a current trend that is being developed in different research works. However, it has not been proposed a service development methodology involving the prosumer user in the process of design, development, implementation and validation of services. This thesis work studies innovative methodologies and technologies related to the co‐creation and relies on this analysis to define and validate a methodological approach that enables the user to be responsible for creating final services. Being mobile prosumer environments a specific case of environments for distributed execution of mobile services, this Thesis work researches in service adaptation, distribution, coordination and resource access techniques, and identifies as requirements the challenges of such environments and characteristics of the participating users. I contribute to service adaptation by defining a variability model that supports the dependency of user personalization decisions, incorporating guiding and error detection mechanisms. Service distribution is implemented by using decomposition techniques based on SPQR trees, quantifying the impact of separating any service in different domains. Considering the communication level for the coordination of distributed service executions I have identified several problems, such as link losses, connections, disconnections and discovery of participants, which I solve using dissemination techniques based on publish‐subscribe communication models and Gossip algorithms. To achieve a flexible distributed service execution in mobile environments, I support adaptation to changes in the availability of resources, while providing a communication infrastructure for the uniform and efficient access to resources. Experimental validations have been conducted to assess the feasibility of the proposed solutions, defining relevant application scenarios (the new intelligent universe, service prosumerization in hospitals and emergency situations in the web of things).

CRYPT4YOU y la utilidad de los MOOCs en la formación online en lengua española.

En los últimos dos años la formación online ha experimentado un auge significativo gracias al paradigma de formación denominado MOOC (Massive Open Online Course). Un MOOC simplifica la formación a distancia gracias a sus características de abierto, colaborativo, masivo y gratuito. Por desgracia en lengua española la utilización de este tipo de recurso formativo todavía es minoritaria. La presente investigación recoge una experiencia de innovación educativa en la que se destaca el diseño, implementación y difusión del primer MOOC en lengua española dedicado a la seguridad de la información por parte de la Universidad Politécnica de Madrid. Esta experiencia aborda las ventajas e inconvenientes de este tipo de recurso formativo, debatiendo aspectos vitales para la elaboración prolongada de cursos tipo MOOC, como son la interactividad y retroalimentación con los usuarios del curso o la forma más adecuada de representar el contenido docente. Todas estas cuestiones reciben respuesta en el MOOC Crypt4you, que con más de 10 meses de vida permite vislumbrar un gran éxito de este tipo de cursos en la formación, al menos en lengua española, de hispanohablantes. ABSTRACT In the last two years, online training has boomed thanks to significant training paradigm called MOOC (Massive Open Online Course). A MOOC simplifies remote training thanks to its open, collaborativend free mass features. Unfortunately, the use of this kind of learning resource in Spanish teaching is still a minority. This research includes an educational experience which emphasizes the design, implementation and dissemination of the first Spanish-language MOOC devoted to information security by the Technical University of Madrid. This experiment addresses the advantages and disadvantages of this kind of learning resource discussing critical issues for developing type MOOC prolonged courses, such as interactivity and feedback from users of the course or the most appropriate way of representing the educational content. All these questions are answered in the MOOC Crypt4you which, over its 10 months of life, can glimpse a great success of this type of training course, at least in Spanish, Spanish-speakers.

From Analysis Model to Software Architecture: a PIM2PIM Mapping.

To our knowledge, no current software development methodology explicitly describes how to transit from the analysis model to the software architecture of the application. This paper presents a method to derive the software architecture of a system from its analysis model. To do this, we are going to use MDA. Both the analysis model and the architectural model are PIMs described with UML 2. The model type mapping designed consists of several rules (expressed using OCL and natural language) that, when applied to the analysis artifacts, generate the software architecture of the application. Specifically the rules act on elements of the UML 2 metamodel (metamodel mapping). We have developed a tool (using Smalltalk) that permits the automatic application of these rules to an analysis model defined in RoseTM to generate the application architecture expressed in the architectural style C2.

Sistema de control de tracción y salida para un monoplaza de la Fórmula SAE

En este proyecto de final de carrera se detalla el proceso de diseño, fabricación, montaje y ajuste de un dispositivo electrónico que sirva como sistema de control de tracción de un vehículo y que acoplaremos sobre un monoplaza de carreras que participa en la competición Formula SAE. La Formula SAE (Society of Automotive Engineers - Sociedad de Ingenieros de Automoción), es una competición de coches de carreras monoplaza a nivel universitario que promueve el desarrollo de la ingeniera aplicada a la automoción. Se pretende que este libro sirva de guía para el correcto manejo y desempeño del sistema fabricado. Además se ha pretendido que su lectura resulte fácil y comprensible para que la persona que lea este libro sea capaz de entender el sistema realizado para así poderlo mejorar. Gracias a la colaboración entre la Escuela Técnica Superior de Ingeniería y Sistemas de Telecomunicación (ETSIST) de la Universidad Politécnica de Madrid (UPM), la Escuela de Ingenieros Industriales de esta misma Universidad (ETSII) y el Instituto Universitario de Investigación del Automóvil (INSIA), se sientan las bases de una plataforma docente en la cual se posibilita la formación y desarrollo de un vehículo tipo formula que participa en la ya mencionada competición Formula SAE. Para ello, se formo en el 2003 el equipo UPMRacing, primer representante español en el evento. El equipo se compone de más de 50 alumnos de la UPM y del Máster de Ingeniería en Automoción del INSIA. Es por tanto, en el vehículo fabricado por el equipo UPMRacing, en el que se pretende instalar este sistema de control de tracción. El control de tracción es un sistema de seguridad del automóvil diseñado para prevenir la perdida de adherencia cuando alguna rueda presenta deslizamiento, bien porque el conductor se excede en la aceleración o bien porque el firme este resbaladizo. La unidad de procesamiento del sistema de control de tracción fabricado lee la velocidad de cada rueda del vehículo mediante unos sensores y determina si existe deslizamiento, en tal caso, manda una señal a la centralita para disminuir la potencia hasta que el deslizamiento disminuya a unos valores controlados. El sistema cuenta con un control remoto que sirve como interfaz para que el piloto pueda manejarlo. Por ultimo, el dispositivo es capaz de conectarse a un bus de comunicaciones CAN para configurar ciertos parámetros. El objetivo del sistema es, básicamente, hacer que el coche no derrape en aceleraciones fuertes; concretamente en las salidas desde parado y al tomar una curva, aumentando así la velocidad en circuito y la seguridad del piloto. ABSTRACT. The purpose of this project is to describe the design, manufacture, assembly and adjustment processes of an electronic device acting as the traction control system (TCS) of a vehicle, that we will attach to a single-seater competition formula SAE car. The Formula SAE (Society of Automotive Engineers) is a graduate-level singleseater racing car competition promoting the development of automotive applied engineering. We also intend this work to serve as a technical user guide of the manufactured system. It is drafted clearly and concisely so that it will be easy for all those to whom it is addressed to understand and subject to further improvements. The close partnership among the Escuela Técnica Superior de Ingeniería y Sistemas de Telecomunicación (ETSIST), Escuela de Ingenieros Industriales (ETSII) of Universidad Politécnica de Madrid (UPM), and the Instituto Universitario de Investigación del Automóvil (INSIA), lays the foundation of a teaching platform enabling the training and development of a single-seater racing car taking part in the already mentioned Formula SAE competition. In this respect, UPMRacing team was created back in 2003, first spanish representative in this event. The team consists of more than 50 students of the UPM and of INSIA Master in Automotive Engineering. It is precisely the vehicle manufactured by UPMRacing team where we intend to install our TCS. TCS is an automotive safety system designed to prevent loss of traction when one wheel has slip, either because the driver exceeds the acceleration or because the firm is slippery. The device’s central processing unit is able to detect the speed of each wheel of the vehicle via special sensors and to determine wheel slip. If this is the case, the system sends a signal to the ECU of the vehicle to reduce the power until the slip is also diminished to controlled values. The device has a remote control that serves as an interface for the pilot to handle it. Lastly, the device is able to connect to a communication bus system CAN to set up certain parameters. The system objective is to prevent skidding under strong acceleration conditions: standing-start from the starting grid or driving into a curve, increasing the speed in circuit and pilot’s safety.

Diseño de una metodología CASE de desarrollo de software

En la actualidad existe una gran expectación ante la introducción de nuevas herramientas y métodos para el desarrollo de productos software, que permitirán en un futuro próximo un planteamiento de ingeniería del proceso de producción software. Las nuevas metodologías que empiezan a esbozarse suponen un enfoque integral del problema abarcando todas las fases del esquema productivo. Sin embargo el grado de automatización conseguido en el proceso de construcción de sistemas es muy bajo y éste está centrado en las últimas fases del ciclo de vida del software, consiguiéndose así una reducción poco significativa de sus costes y, lo que es aún más importante, sin garantizar la calidad de los productos software obtenidos. Esta tesis define una metodología de desarrollo software estructurada que se puede automatizar, es decir una metodología CASE. La metodología que se presenta se ajusta al modelo de ciclo de desarrollo CASE, que consta de las fases de análisis, diseño y pruebas; siendo su ámbito de aplicación los sistemas de información. Se establecen inicialmente los principios básicos sobre los que la metodología CASE se asienta. Posteriormente, y puesto que la metodología se inicia con la fijación de los objetivos de la empresa que demanda un sistema informático, se emplean técnicas que sirvan de recogida y validación de la información, que proporcionan a la vez un lenguaje de comunicación fácil entre usuarios finales e informáticos. Además, estas mismas técnicas detallarán de una manera completa, consistente y sin ambigüedad todos los requisitos del sistema. Asimismo, se presentan un conjunto de técnicas y algoritmos para conseguir que desde la especificación de requisitos del sistema se logre una automatización tanto del diseño lógico del Modelo de Procesos como del Modelo de Datos, validados ambos conforme a la especificación de requisitos previa. Por último se definen unos procedimientos formales que indican el conjunto de actividades a realizar en el proceso de construcción y cómo llevarlas a cabo, consiguiendo de esta manera una integridad en las distintas etapas del proceso de desarrollo.---ABSTRACT---Nowdays there is a great expectation with regard to the introduction of new tools and methods for the software products development that, in the very near future will allow, an engineering approach in the software development process. New methodologies, just emerging, imply an integral approach to the problem, including all the productive scheme stages. However, the automatization degree obtained in the systems construction process is very low and focused on the last phases of the software lifecycle, which means that the costs reduction obtained is irrelevant and, which is more important, the quality of the software products is not guaranteed. This thesis defines an structured software development methodology that can be automated, that is a CASE methodology. Such a methodology is adapted to the CASE development cycle-model, which consists in analysis, design and testing phases, being the information systems its field of application. Firstly, we present the basic principies on which CASE methodology is based. Secondly, since the methodology starts from fixing the objectives of the company demanding the automatization system, we use some techniques that are useful for gathering and validating the information, being at the same time an easy communication language between end-users and developers. Indeed, these same techniques will detail completely, consistently and non ambiguously all the system requirements. Likewise, a set of techniques and algorithms are shown in order to obtain, from the system requirements specification, an automatization of the Process Model logical design, and of the Data Model logical design. Those two models are validated according to the previous requirement specification. Finally, we define several formal procedures that suggest which set of activities to be accomplished in the construction process, and how to carry them out, getting in this way integrity and completness for the different stages of the development process.

Contribuciones en sistemas de adquisición de datos inteligentes para entornos de fusión por confinamiento magnético

Los sistemas de adquisición de datos utilizados en los diagnósticos de los dispositivos de fusión termonuclear se enfrentan a importantes retos planteados en los dispositivos de pulso largo. Incluso en los dispositivos de pulso corto, en los que se analizan los datos después de la descarga, existen aún una gran cantidad de datos sin analizar, lo cual supone que queda una gran cantidad de conocimiento por descubrir dentro de las bases de datos existentes. En la última década, la comunidad de fusión ha realizado un gran esfuerzo para mejorar los métodos de análisis off‐line para mejorar este problema, pero no se ha conseguido resolver completamente, debido a que algunos de estos métodos han de resolverse en tiempo real. Este paradigma lleva a establecer que los dispositivos de pulso largo deberán incluir dispositivos de adquisición de datos con capacidades de procesamiento local, capaces de ejecutar avanzados algoritmos de análisis. Los trabajos de investigación realizados en esta tesis tienen como objetivo determinar si es posible incrementar la capacidad local de procesamiento en tiempo real de dichos sistemas mediante el uso de GPUs. Para ello durante el trascurso del periodo de experimentación realizado se han evaluado distintas propuestas a través de casos de uso reales elaborados para algunos de los dispositivos de fusión más representativos como ITER, JET y TCV. Las conclusiones y experiencias obtenidas en dicha fase han permitido proponer un modelo y una metodología de desarrollo para incluir esta tecnología en los sistemas de adquisición para diagnósticos de distinta naturaleza. El modelo define no sólo la arquitectura hardware óptima para realizar dicha integración, sino también la incorporación de este nuevo recurso de procesamiento en los Sistemas de Control de Supervisión y Adquisición de Datos (SCADA) utilizados en la comunidad de fusión (EPICS), proporcionando una solución completa. La propuesta se complementa con la definición de una metodología que resuelve las debilidades detectadas, y permite trazar un camino de integración de la solución en los estándares hardware y software existentes. La evaluación final se ha realizado mediante el desarrollo de un caso de uso representativo de los diagnósticos que necesitan adquisición y procesado de imágenes en el contexto del dispositivo internacional ITER, y ha sido testeada con éxito en sus instalaciones. La solución propuesta en este trabajo ha sido incluida por la ITER IO en su catálogo de soluciones estándar para el desarrollo de sus futuros diagnósticos. Por otra parte, como resultado y fruto de la investigación de esta tesis, cabe destacar el acuerdo llevado a cabo con la empresa National Instruments en términos de transferencia tecnológica, lo que va a permitir la actualización de los sistemas de adquisición utilizados en los dispositivos de fusión. ABSTRACT Data acquisition systems used in the diagnostics of thermonuclear fusion devices face important challenges due to the change in the data acquisition paradigm needed for long pulse operation. Even in shot pulse devices, where data is mainly analyzed after the discharge has finished , there is still a large amount of data that has not been analyzed, therefore producing a lot of buried knowledge that still lies undiscovered in the data bases holding the vast amount of data that has been generated. There has been a strong effort in the fusion community in the last decade to improve the offline analysis methods to overcome this problem, but it has proved to be insufficient unless some of these mechanisms can be run in real time. In long pulse devices this new paradigm, where data acquisition devices include local processing capabilities to be able to run advanced data analysis algorithms, will be a must. The research works done in this thesis aim to determining whether it is possible to increase local capacity for real‐time processing of such systems by using GPUs. For that, during the experimentation period, various proposals have been evaluated through use cases developed for several of the most representative fusion devices, ITER, JET and TCV. Conclusions and experiences obtained have allowed to propose a model, and a development methodology, to include this technology in systems for diagnostics of different nature. The model defines not only the optimal hardware architecture for achieving this integration, but also the incorporation of this new processing resource in one of the Systems of Supervision Control and Data Acquisition (SCADA) systems more relevant at the moment in the fusion community (EPICS), providing a complete solution. The final evaluation has been performed through a use case developed for a generic diagnostic requiring image acquisition and processing for the international ITER device, and has been successfully tested in their premises. The solution proposed in this thesis has been included by the ITER IO in his catalog of standard solutions for the development of their future diagnostics. This has been possible thanks to the technologic transfer agreement signed with xi National Instruments which has permitted us to modify and update one of their core software products targeted for the acquisition systems used in these devices.

A Porposal: "Agro-ERASMUS"

The rural population is getting smaller as percentage of the total population in the countries. There is a constant depopulation of rural areas to urban areas. The most extreme data are in countries like USA, where the rural population is 1.5%, from which 1% of that amount is part time and only 0.5% full time. On the other side, we have countries with more than 50% rural population. Related to training, cultural development, business and specific weight in society, rural residents have no significance in their societies. As they are few, and separated across the territory they have no influence on their societies. Comparing the USA farmer with one from the EU, we see that the American one is a businessperson and the European one, in most cases is a farm worker. To reduce this gap between these different farmers, we believe that we must train the new generations of children belonging to farming Europe. They must have a common language, English; they must know other countries culture and farming systems, live and network with other young Europeans colleagues,future young farmers. It is what we have coined as AGRO-ERASMUS. A project to be placed within the EU Common Agriculture Policies. The project must be designed before its implementation. Even some previous experience should make better viability. It should make use of a network of agricultural universities in several European countries. Each university would build a "farm school" where young people would learn "English?, and visit and work in small agricultural practices with a correct use of the time. One important subject dealing with should be agribusiness. The procedure based on the ?Farm School? (F-S) experience, should start with young people from 13 years up to 18 years. Their attendance, every summer, to the F-S should be rotated between different countries besides their own. The first and second year, with young people 13/14 years old, the Farm School would last less than three weeks in an English speaking country (Ireland, UK or someone else). They should live with a local family the time they stay outside of the Farm School (F-S). This two years period must be devoted to learn and become familiar with the English language and cultural differences. The rest of the four years left, the Farm Schools will have longer duration and be placed in other countries from the network. The living way would be in multinational teams of young people where the only spoken language would be English. After six years of summer oexistence speaking English and learning new competences and skills with colleagues from other countries, we would have a great team of young and future European farmers, able to travel free and confident through the whole Europe and ready to be engaged in productive, commercial and research activities. These new young farmers may revive European agriculture and would not look any more like rural habitants, but international business-farmers, professionally speaking. In a brief survey among the assistants to the Fifth International Academic Conference titled "Alternative Income Sources in Small Agricultural Holdings of the European Union" held in Krakow (PL) in June 2015, participants from universities and countries like Poland, Hungary, Rep. Czech, Portugal, Romania, etc., expressed the necessity of addressing this problem in a new and bold way.

Construção e validação de um sistema de observação em competição no futebol de bolas paradas

Tendo em conta a importância assumida das bolas paradas (BP), como elementos decisivos no desenvolvimento e decisão nos jogos de futebol, o objetivo do estudo foi construir e validar um Sistema de Observação em Competição no Futebol de Bolas Paradas (SOCFutBP), de acordo com a metodologia observacional e suportado por um software de análise de jogo (VideObserver). O estudo foi constituído por uma amostra de 80 ações de bolas paradas observadas numa das partes de um jogo de futebol do Campeonato Nacional de Juvenis de Sub-17. A metodologia de desenvolvimento do sistema de observação adotou os seguintes passos: definição de critérios (e respetivas categorias); seleção e adequação do instrumento; aperfeiçoamento e validação facial do sistema; validação propriamente dita do sistema (intra e inter-observadores) e aplicação do estudo piloto. O Sistema de Observação em Competição de Futebol de Bola Paradas (SOCFutBP) foi construído e validado apresentando dez critérios adequados e ajustados para a recolha e análise de dados no âmbito da investigação focada nas bolas paradas no Futebol, uma vez que todos os critérios apresentaram valores de K superiores a 0,75 na fiabilidade intra-observador e inter-observadores.

A Comunicação Mediada por Interfaces Digitais: a interação humana com os jogos digitais em celulares.

O trabalho é um estudo exploratório sobre o processamento de mensagens de entretenimento. O objetivo do trabalho foi propor e testar um modelo de processamento de mensagens dedicado à compreensão de jogos digitais. Para realizar tal tarefa realizou-se um extenso levantamento de técnicas de observação de usuários diante de softwares e mídias, para conhecer as qualidades e limitações de cada uma dessas técnicas, bem como de sua abordagem do problema. Também foi realizado um levantamento dos modelos de processamento de mensagens nas mídias tradicionais e nas novas mídias. Com isso foi possível propor um novo modelo de análise de processamento de mensagens de entretenimento. Uma vez criado o modelo teórico, fez-se preciso testar se os elementos propostos como participantes desse processo estavam corretos e se seriam capazes de capturar adequadamente as semelhanças e diferenças entre a interação entre jogadores e as diferentes mídias. Por essa razão, estruturou-se uma ferramenta de coleta de dados, que foi validada junto a designers de jogos digitais, uma vez que esses profissionais conhecem o processo de criação de um jogo, seus elementos e objetivos. Posteriormente, foi feito um primeiro teste, junto a praticantes de jogos digitais de diversas idades em computadores pessoais e TV digital interativa, a fim e verificar como os elementos do modelo relacionavam-se entre si. O teste seguinte fez a coleta de dados de praticantes de jogos digitais em aparelhos celulares, tendo como objetivo capturar como se dá a formação de uma experiência através do processamento da mensagem de entretenimento num meio cujas limitações são inúmeras: tamanho de tela e teclas, para citar algumas delas. Como resultado, verificou-se, por meio de testes estatísticos, que jogos praticados em meios como computadores pessoais atraem mais por seus aspectos estéticos, enquanto a apreciação de um jogo em aparelhos celulares depende muito mais de sua habilidade de manter a interação que um jogo praticado em PC. Com isso conclui-se que o processamento das mensagens de entretenimento depende da capacidade dos seus criadores em entender os limites de cada meio e usar adequadamente os elementos que compõe o ambiente de um jogo, para conseguir levar à apreciação do mesmo.(AU)

A Comunicação Mediada por Interfaces Digitais: a interação humana com os jogos digitais em celulares.

O trabalho é um estudo exploratório sobre o processamento de mensagens de entretenimento. O objetivo do trabalho foi propor e testar um modelo de processamento de mensagens dedicado à compreensão de jogos digitais. Para realizar tal tarefa realizou-se um extenso levantamento de técnicas de observação de usuários diante de softwares e mídias, para conhecer as qualidades e limitações de cada uma dessas técnicas, bem como de sua abordagem do problema. Também foi realizado um levantamento dos modelos de processamento de mensagens nas mídias tradicionais e nas novas mídias. Com isso foi possível propor um novo modelo de análise de processamento de mensagens de entretenimento. Uma vez criado o modelo teórico, fez-se preciso testar se os elementos propostos como participantes desse processo estavam corretos e se seriam capazes de capturar adequadamente as semelhanças e diferenças entre a interação entre jogadores e as diferentes mídias. Por essa razão, estruturou-se uma ferramenta de coleta de dados, que foi validada junto a designers de jogos digitais, uma vez que esses profissionais conhecem o processo de criação de um jogo, seus elementos e objetivos. Posteriormente, foi feito um primeiro teste, junto a praticantes de jogos digitais de diversas idades em computadores pessoais e TV digital interativa, a fim e verificar como os elementos do modelo relacionavam-se entre si. O teste seguinte fez a coleta de dados de praticantes de jogos digitais em aparelhos celulares, tendo como objetivo capturar como se dá a formação de uma experiência através do processamento da mensagem de entretenimento num meio cujas limitações são inúmeras: tamanho de tela e teclas, para citar algumas delas. Como resultado, verificou-se, por meio de testes estatísticos, que jogos praticados em meios como computadores pessoais atraem mais por seus aspectos estéticos, enquanto a apreciação de um jogo em aparelhos celulares depende muito mais de sua habilidade de manter a interação que um jogo praticado em PC. Com isso conclui-se que o processamento das mensagens de entretenimento depende da capacidade dos seus criadores em entender os limites de cada meio e usar adequadamente os elementos que compõe o ambiente de um jogo, para conseguir levar à apreciação do mesmo.(AU)