Genetic redundancy among durum wheat accessions as assessed with SSRs and endosperm proteins

Reducing duplication in ex-situ collections is complicated and requires good quality genetic markers. This study was conducted to assess the value of endosperm proteins and SSRs for validation of potential duplicates and monitoring intra-accession variability. Fifty durum wheat (Triticum turgidum ssp. durum) accessions grouped in 23 potential duplicates, and previously characterised for 30 agro-morphological traits, were analysed for gliadin and high molecular weight glutenin (HMWG) subunit alleles, total protein, and 24 SSRs, covering a wide genome area. Similarity and dissimilarity matrices were generated based on protein and SSRs alleles. For heterogeneous accessions at gliadins the percent pattern homology (PH) between gliadin patterns and the Nei’s coefficient of genetic identity (I) were computed. Eighteen duplicates identical for proteins showed none or less than 3 unshared SSRs alleles. For heterogeneous accessions PH and I values lower than 80 identified clearly off-types with more than 3 SSRs unshared. Only those biotypes differing in no more than one protein-coding locus were confirmed with SSRs. A good concordance among proteins, morphological traits, and SSR were detected. However, the discrepancy in similarity detected in some cases showed that it is advisable to evaluate redundancy through distinct approaches. The analysis in proteins together with SSRs data are very useful to identify duplicates, biotypes, close related genotypes, and contaminations

Fabrication process of Mo/Au TES at RT

We report on the fabrication details of TES based on Mo/Au bilayers. The Mo layer is deposited by radio frequency (RF) sputtering and capped with a sputter deposited thin Au protection layer. Afterwards, a second Au layer of suitable (lower) resistivity is deposited ex‐situ by e‐beam evaporation, until completion of the total desired Au thickness. The deposition was performed at room temperature (RT) on LPCVD Si3 N4 membranes. Such a deposition procedure is very reproducible and allow controlling the critical temperature (Tc) and normal electrical resistance (RN ) of the Mo/Au bilayer. The process is optimized to achieve low stress bilayers, thus avoiding the undesirable curvature of the membranes. Bilayers are patterned using photolithographic techniques and wet etching procedures. Mo superconducting paths are used to contact the Mo/Au bilayers, thus ensuring good electrical conductivity and thermal isolation. The entire fabrication process let to stable and reproducible sensors with required and tunable functional properties

Individualization and Electrical Characterization of SiGe Nanowires

SiGe nanowires of different Ge atomic fractions up to 15% were grown and ex-situ n-type doped by diffusion from a solid source in contact with the sample. The phenomenon of dielectrophoresis was used to locate single nanowires between pairs of electrodes in order to carry out electrical measurements. The measured resistance of the as-grown nanowires is very high, but it decreases more than three orders of magnitude upon doping, indicating that the doping procedure used has been effective

Plant regeneration from an endangered valuable cork oak tree by somatic embryogenesis.

Among the several applications of in vitro tissue culture techniques, the conservation of plant germplasm is one of the most widely used. The cork oak is one of the principal tree species in the Western Mediterranean región. Within this área, the Balearic Islands are considered to be a glacial refuge, and therefore a reservoir of genetic resources. A singular tree has been found in the small Minorca Island population. The haplotype of this tree is of Tyrrhenian origin, showing a past link between Minorca and Sardinia. Moreover, this tree do not bear a deletion within an ITS from ribosimic nuclear DNA, which is fairly common in many populations of this species, and indicates that ir may be the descendant of a very ancient population. This tree is currently in a precarious condition, and it has not produced acorns in the last years. Hence there is a clear need of vegetative propagation to conserve this genotype. We have previously developed methods to clone adult cork oak tres by somatic embryogenesis, and therefore the aim of the present work was to clone this singular tree. There braches from the corwn were collected in November 2004, and methods previously described were carried out. By February 2005 somatic embryogenesis was obtained from leaves of the tree with percentages on induction ranging from 17 to 54% depending on the branch, which may show a novel source of variation that requires further study. Spontaneously matured somatic embryos germinated at 46% in average, and the first somatic seedlings from the Alfavaret's cork oak tree were obtained. Therefore, this study shows one of the most relevant applications of somatic embryogenesis: the plant regeneration of valuable genotypes for the in situ and ex situ conservation of forest genetic resources.

Characterization of a Mo/Au thermometer for ATHENA

The first dark characterization of a thermometer fabricated with our Mo/Au bilayers to be used as a transition edge sensor is presented. High-quality, stress-free Mo layers, whose thickness is used to tune the critical temperature (TC ) down to 100 mK, are deposited by sputtering at room temperature (RT ) on Si3N4 bulk and membranes, and protected from degradation with a 15-nm sputtered Au layer. An extra layer of high-quality Au is deposited by ex situ e-beam to ensure low residual resistance. The thermometer is patterned on a membrane using standard photolithographic techniques and wet etching processes, and is contacted through Mo paths, displaying a sharp superconducting transition (α ≈ 600). Results show a good coupling between Mo and Au layers and excellent TC reproducibility, allowing to accurately correlate dM o and TC . Since dAu is bigger than ξM for all analyzed samples, bilayer residual resistance can be modified without affecting TC . Finally, first current to voltage measurements at different temperatures are measured and analyzed, obtaining the corresponding characterization parameters.

Simbiosis bacteriana y conservación de flora amenazada: el caso del Lupinus mariae-josephae.

Lupinus mariae-josephae H. Pascual es un altramuz endémico de un reducido número de sitios en la Comunidad Valenciana, donde coloniza sustratos de ?terra rossa? sobre afloramientos de lapiaz. Descrito en 2004 a partir de plantas cultivadas, no pudo localizarse en campo hasta 2006, y el hallazgo de sus poblaciones ha estado estrechamente ligado a topónimos relativos a su nombre popular, ?tramús? en valenciano. Se ha demostrado la clara independencia genética, y en consecuencia el valor como ?buen taxon? de esta especie. Hasta ahora se han caracterizado y censado cinco poblaciones silvestres en diferentes localidades, y en todas ellas se observan fuertes fluctuaciones interanuales de sus efectivos, a veces acompañadas de importantes diferencias de vigor de los ejemplares; tres de estas poblaciones están actualmente protegidas mediante sendas microrreservas de flora. Algunos de estos núcleos poblacionales se componen en años concretos de formas poco vigorosas, que a menudo sólo producen 1-2 frutos con 1-2 semillas; por el contrario, las formas más vigorosas pueden producir varias docenas de semillas. La emergencia de plántulas se produce con gran probabilidad tras años de progresiva escarificación de la cubierta de las semillas en el suelo, y probablemente se acelera por procesos de reducción de la cubierta vegetal como los incendios forestales. La germinación experimental ex situ sólo se consigue satisfactoriamente mediante el pretratamiento de escaldado de las semillas.

Biodiversidad de frijol (Phaseolus vulgaris L.) en Honduras. Caracterización agromorfológica, molecular y ecogeográfica

En el presente trabajo se ha llevado a cabo un estudio de la biodiversidad del frijol común (Phaseolus vulgaris L.) en Honduras, que es el segundo de los cultivos de granos básicos en importancia. Dicho estudio se ha realizado mediante una caracterización agromorfológica, molecular y ecogeográfica en una selección de 300 accesiones conservadas en el banco de germoplasma ubicado en la Escuela Agrícola Panamericana (EAP) El Zamorano, y que se colectaron en 13 departamentos del país durante el periodo de 1990 a 1994. Estas accesiones fueron colectadas cuatro años antes del acontecimiento del huracán Mitch, el cual a su paso afectó al 96% del área total cultivable en su momento, lo cual nos hace considerar que la biodiversidad de razas locales (landraces) de frijol común existentes in situ fueron severamente afectadas. Los trabajos dirigidos a analizar la biodiversidad de razas locales de frijol común en Honduras son escasos, y este trabajo se constituye como el primero que incluye una amplia muestra a ser estudiada a través de una caracterización en tres aspectos complementarios (agromorfológico, molecular y ecogeográfico). Se evaluaron 32 caracteres agromorfológicos, 12 cuantitativos y 20 cualitativos, en distintas partes de la planta. Se establecieron las correlaciones entre los caracteres agromorfológicos y se elaboró un dendrograma con los mismos, en el que se formaron ocho grupos, en parte relacionados principalmente con los colores y tamaños de la semilla. Mediante el análisis de componentes principales se estudiaron los caracteres de más peso en cada uno de los tres primeros componentes. Asimismo, se estudiaron las correlaciones entre caracteres, siendo las más altas la longitud y anchura de la hoja, días a madurez y a cosecha y longitud y peso de semilla. Por otra parte, el mapa de diversidad agromorfológica mostró la existencia de tres zonas con mayor diversidad: en el oeste (en los departamentos de Santa Bárbara, Lempira y Copán), en el centro-norte (en los departamentos de Francisco Morazán, Yoro y Atlántida) y en el sur (en el departamento de El Paraíso y al sur de Francisco Morazán). Para la caracterización molecular partimos de 12 marcadores de tipo microsatélite, evaluados en 54 accesiones, que fueron elegidas por constituir grupos que compartían un mismo nombre local. Finalmente, se seleccionaron los cuatro microsatélites (BM53, GATS91, BM211 y PV-AT007) que resultaron ser más polimórficos e informativos para el análisis de las 300 accesiones, con los que se detectaron un total de 119 alelos (21 de ellos únicos o privados de accesión) y 256 patrones alélicos diferentes. Para estudiar la estructura y relaciones genéticas en las 300 accesiones se incluyeron en el análisis tres controles o accesiones de referencia, pertenecientes dos de ellas al acervo genético Andino y una al Mesoamericano. En el dendrograma se obtuvieron 25 grupos de accesiones con idénticas combinaciones de alelos. Al comparar este dendrograma con el de caracteres agromorfológicos se observaron diversos grupos con marcada similitud en ambos. Un total de 118 accesiones resultaron ser homogéneas y homocigóticas, a la vez que representativas del grupo de 300 accesiones, por lo que se analizaron con más detalle. El análisis de la estructura genética definió la formación de dos grupos, supuestamente relacionados con los acervos genéticos Andino (48) y Mesoamericano (61), y un reducido número de accesiones (9) que podrían tener un origen híbrido, debido a la existencia de un cierto grado de introgresión entre ambos acervos. La diferenciación genética entre ambos grupos fue del 13,3%. Asimismo, 66 de los 82 alelos detectados fueron privados de grupo, 30 del supuesto grupo Andino y 36 del Mesoamericano. Con relación al mapa de diversidad molecular, presentó una distribución bastante similar al de la diversidad agromorfológica, detectándose también las zonas de mayor diversidad genética en el oeste (en los departamentos de Lempira y Santa Bárbara), en el centro-norte (en los departamentos de Yoro y Atlántida) y en el sur (en el departamento de El Paraíso y al sur de Francisco Morazán). Para la caracterización ecogeográfica se seleccionaron variables de tipo bioclimático (2), geofísico (2) y edáfico (8), y mediante el método de agrupamiento de partición alrededor de los medoides, la combinación de los grupos con cada uno de los tres tipos de variables definió un total de 32 categorías ecogeográficas en el país, detectándose accesiones en 16 de ellas. La distribución de las accesiones previsiblemente esté relacionada con la existencia de condiciones más favorables al cultivo de frijol. En el mapa de diversidad ecogeográfica, nuevamente, se observaron varias zonas con alta diversidad tanto en el oeste, como en el centro-norte y en el sur del país. Como consecuencia del estudio realizado, se concluyó la existencia de una marcada biodiversidad en el material analizado, desde el punto de vista tanto agromorfológico como molecular. Por lo que resulta de gran importancia plantear la conservación de este patrimonio genético tanto ex situ, en bancos de germoplasma, como on farm, en las propias explotaciones de los agricultores del país, siempre que sea posible. ABSTRACT In the present work we have carried out a study of the biodiversity of the common bean (Phaseolus vulgaris L) in Honduras, which is the second of the basic grain crops in importance. This study was conducted through agro-morphological, molecular and ecogeographical characterization of a selection of 300 accessions conserved in the genebank located in the ‘Escuela Agrícola Panamericana (EAP) El Zamorano’ that were collected in 13 departments of the country during the 1990 to 1994 period. These accessions were collected four years before the occurrence of Mitch hurricane, which affected 96% of the total cultivable area at the time, which makes us to consider that the biodiversity of local landraces of common bean existing in situ were severely affected. The work aimed to analyze the biodiversity of local races of common bean in Honduras are scarce, and this work constitutes the first to include a large sample to be studied through a characterization on three complementary aspects (agromorphological, molecular and ecogeographical). Thirty two agromorphological characters, 12 quantitative and 20 qualitative, in various parts of the plant were evaluated. Correlations between agromorphological characters were established and a dendrogram with them was constructed, in which eight groups were formed, in part mainly related to the colors and sizes of the seeds. By principal component analysis the characters with more weight in each of the first three components were studied. Also, correlations between characters were studied, the highest of them being length and leaf width, days to maturity and harvest, and seed length and weight. Moreover, the map of agromorphological diversity showed the existence of three areas with more diversity: the west (departments of Santa Barbara, Copan and Lempira), the center-north (departments of Francisco Morazán, Yoro and Atlántida) and the south (department of El Paraiso and south of Francisco Morazán). For molecular characterization we started with 12 microsatellite markers, evaluated in 54 accessions, which were chosen because they formed groups that shared the same local name. Finally, four microsatellites (BM53, GATS91, BM211 and PV-AT007) were selected for the analysis of 300 accessions, since they were the most polymorphic and informative. They gave a total of 119 alleles (21 of them unique or private for the accession) and 256 different allelic patterns. To study the structure and genetic relationships in the 300 accessions, three controls or accessions of reference were included in the analysis: two of them belonging to the Andean gene pool and one to the Mesoamerican. In the dendrogram, 25 accession groups with identical allele combinations were obtained. Comparing this dendrogram to the obtained with agromorphological characters, several groups with marked similarity in both were observed. A total of 118 accessions were homozygous and homogeneous, while representing the group of 300 accessions, therefore they were analyzed in more detail. The analysis of the genetic structure defined the formation of two groups, supposedly related to the Andean (48) and the Mesoamerican (61) gene pools, and a small number of accessions (9) which may have a hybrid origin, due to the existence of some degree of introgression between both gene pools. Genetic differentiation between both groups was 13.3%. Also, 66 of the 82 detected alleles were private or unique for the group, 30 of the supposed Andean group and 36 of the Mesoamerican. With relation to the map of molecular diversity, it showed a quite similar distribution to the agromorphological, also detecting the areas of greatest genetic diversity in the west (departments of Lempira and Santa Bárbara), in the center-north (departments Atlántida and Yoro) and in the south (departments of El Paraíso and south of Francisco Morazán). For the ecogeographical characterization, bioclimatic (2), geophysical (2) and edaphic (8) variables were selected, and by the method of clustering partition around the medoids, the combination of the groups to each of the three types of variables defined a total of 32 ecogeographical categories in the country, having accessions in 16 of them. The distribution of accessions is likely related to the existence of more favorable conditions for the cultivation of beans. The map of ecogeographical diversity, again, several areas with high diversity both in the west and in the center-north and in the south of the country were observed. As a result of study, the existence of marked biodiversity in the analyzed material was concluded, both from the agromorphological and from the molecular point of view. Consequently it is very important to propose the conservation of this genetic heritage both ex situ, in genebanks, as on farm, in the holdings of the farmers of the country, whenever possible.

Mapping Genetic Diversity of Cherimoya (Annona cherimola Mill.): Application of Spatial Analysis for Conservation and Use of Plant Genetic Resources.

There is a growing call for inventories that evaluate geographic patterns in diversity of plant genetic resources maintained on farm and in species' natural populations in order to enhance their use and conservation. Such evaluations are relevant for useful tropical and subtropical tree species, as many of these species are still undomesticated, or in incipient stages of domestication and local populations can offer yet-unknown traits of high value to further domestication. For many outcrossing species, such as most trees, inbreeding depression can be an issue, and genetic diversity is important to sustain local production. Diversity is also crucial for species to adapt to environmental changes. This paper explores the possibilities of incorporating molecular marker data into Geographic Information Systems (GIS) to allow visualization and better understanding of spatial patterns of genetic diversity as a key input to optimize conservation and use of plant genetic resources, based on a case study of cherimoya (Annona cherimola Mill.), a Neotropical fruit tree species. We present spatial analyses to (1) improve the understanding of spatial distribution of genetic diversity of cherimoya natural stands and cultivated trees in Ecuador, Bolivia and Peru based on microsatellite molecular markers (SSRs); and (2) formulate optimal conservation strategies by revealing priority areas for in situ conservation, and identifying existing diversity gaps in ex situ collections. We found high levels of allelic richness, locally common alleles and expected heterozygosity in cherimoya's putative centre of origin, southern Ecuador and northern Peru, whereas levels of diversity in southern Peru and especially in Bolivia were significantly lower. The application of GIS on a large microsatellite dataset allows a more detailed prioritization of areas for in situ conservation and targeted collection across the Andean distribution range of cherimoya than previous studies could do, i.e. at province and department level in Ecuador and Peru, respectively.

Aplicación de la celulosa bacteriana a la restauración del patrimonio bibliográfico y documental en papel

La preservación del patrimonio bibliográfico y documental en papel es uno de los mayores retos a los que se enfrentan bibliotecas y archivos de todo el mundo. La búsqueda de soluciones al problema del papel degradado ha sido abordada históricamente desde dos líneas de trabajo predominantes: la conservación de estos documentos mediante la neutralización de los ácidos presentes en ellos con agentes alcalinos, y su restauración mediante el método de laminación fundamentalmente con papel de origen vegetal. Sin embargo, no se ha explorado con éxito la posibilidad de reforzar la celulosa dañada, y el problema sigue sin encontrar una solución satisfactoria. Hasta el día de hoy, el desarrollo de tratamientos basados en biotecnología en la conservación del patrimonio documental ha sido muy escaso, aunque la capacidad de ciertas bacterias de producir celulosa lleva a plantear su uso en el campo de la conservación y restauración del papel. La celulosa bacteriana (CB) es químicamente idéntica a la celulosa vegetal, pero su organización macroscópica es diferente. Sus propiedades únicas (alto grado de cristalinidad, durabilidad, resistencia y biocompatibilidad) han hecho de este material un excelente recurso en diferentes campos. En el desarrollo de esta tesis se ha estudiado el uso de la celulosa bacteriana, de alta calidad, generada por Gluconacetobacter sucrofermentans CECT 7291, para restaurar documentos deteriorados y consolidar los que puedan estar en peligro de degradación, evitando así su destrucción y proporcionando al papel que se restaura unas buenas propiedades mecánicas, ópticas y estructurales. Se desarrollan asimismo protocolos de trabajo que permitan la aplicación de dicha celulosa. En primer lugar se seleccionó el medio de cultivo que proporcionó una celulosa adecuada para su uso en restauración. Para ello se evaluó el efecto que tienen sobre la celulosa generada las fuentes de carbono y nitrógeno del medio de cultivo, manteniendo como parámetros fijos la temperatura y el pH inicial del medio, y efectuando los ensayos en condiciones estáticas. Se evaluó, también, el efecto que tiene en la CB la adición de un 1% de etanol al medio de cultivo. Las capas de celulosa se recolectaron a cuatro tiempos distintos, caracterizando en cada uno de ellos el medio de cultivo (pH y consumo de fuente de carbono), y las capas de CB (pH, peso seco y propiedades ópticas y mecánicas). La mejor combinación de fuentes de carbono y nitrógeno resultó ser fructosa más extracto de levadura y extracto de maíz, con o sin etanol, que proporcionaban una buena relación entre la producción de celulosa y el consumo de fuente de carbono, y que generaban una capa de celulosa resistente y homogénea. La adición de etanol al medio de cultivo, si bien aumentaba la productividad, causaba un descenso apreciable de pH. Las capas de CB obtenidas con los medios de cultivo optimizados se caracterizaron en términos de sus índices de desgarro y estallido, propiedades ópticas, microscopía electrónica de barrido (SEM), difracción de rayos-X, espectroscopía infrarroja con transformada de Fourier (FTIR), grado de polimerización, ángulos de contacto estáticos y dinámicos, y porosimetría de intrusión de mercurio. Por otro lado hay que tener en cuenta que el material restaurado debe ser estable con el tiempo. Por ello esta misma caracterización se efectuó tras someter a las capas de CB a un proceso de envejecimiento acelerado. Los resultados mostraron que la CB resultante tiene un elevado índice de cristalinidad, baja porosidad interna, buenas propiedades mecánicas, y alta estabilidad en el tiempo. Para desarrollar los protocolos de trabajo que permitan la restauración con esta celulosa optimizada, se comienzó con un proceso de selección de los papeles que van a ser restaurados. Se eligieron tres tipos de papeles modelo, hechos con pasta mecánica, química y filtro (antes y después de ser sometidos a un proceso de envejecimiento acelerado), y tres libros viejos adquiridos en el mercado de segunda mano. Estos ejemplares a restaurar se caracterizaron también en términos de sus propiedades mecánicas y fisicoquímicas. El primer protocolo de restauración con CB que se evaluó fue el denominado laminación. Consiste en aplicar un material de refuerzo al documento mediante el uso de un adhesivo. Se seleccionó para ello la CB producida en el medio de cultivo optimizado con un 1% de etanol. Se aplicó un método de purificación alcalino (1 hora a 90 °C en NaOH al 1%) y como adhesivo se seleccionó almidón de trigo. El proceso de laminación se efectuó también con papel japonés (PJ), un material habitualmente utilizado en conservación, para comparar ambos materiales. Se concluyó que no hay diferencias significativas en las características estudiadas entre los dos tipos de materiales de refuerzo. Se caracterizó el material reforzado y, también, después de sufrir un proceso de envejecimiento acelerado. Los papeles laminados con CB mostraban diferencias más marcadas en las propiedades ópticas que los restaurados con PJ, con respecto a los originales. Sin embargo, el texto era más legible cuando el material de restauración era la CB. La mojabilidad disminuía con ambos tipos de refuerzo, aunque en los papeles laminados con CB de manera más marcada e independiente del material a restaurar. Esto se debe a la estructura cerrada de la CB, que también conduce a una disminución en la permeabilidad al aire. Este estudio sugiere que la CB mejora la calidad del papel deteriorado, sin alterar la información que contiene, y que esta mejora se mantiene a lo largo del tiempo. Por tanto, la CB puede ser utilizada como material de refuerzo para laminar, pudiendo ser más adecuada que el PJ para ciertos tipos de papeles. El otro método de restauración que se estudió fue la generación in situ de la CB sobre el papel a restaurar. Para ello se seleccionó el medio de cultivo sin etanol, ya que el descenso de pH que causaba su presencia podría dañar el documento a restaurar. El método de purificación elegido fue un tratamiento térmico (24 horas a 65 °C), menos agresivo para el material a restaurar que el tratamiento alcalino. Se seleccionó la aplicación del medio de cultivo con la bacteria mediante pincel sobre el material a restaurar. Una vez caracterizado el material restaurado, y éste mismo tras sufrir un proceso de envejecimiento acelerado, se concluyó que no hay modificación apreciable en ninguna característica, salvo en la permeabilidad al aire, que disminuye de manera muy evidente con la generación de CB, dando lugar a un material prácticamente impermeable al aire. En general se puede concluir que ha quedado demostrada la capacidad que tiene la celulosa generada por la bacteria Gluconacetobacter sucrofermentans CECT 7291 para ser utilizada como material de refuerzo en la restauración del patrimonio documental en papel. Asimismo se han desarrollado dos métodos de aplicación, uno ex situ y otro in situ, para efectuar esta tarea de restauración. ABSTRACT The preservation of bibliographic and documentary heritage is one of the biggest challenges that libraries and archives around the world have to face. The search for solutions to the problem of degraded paper has historically been focused from two predominants lines of work: the conservation of these documents by the neutralization of acids in them with alkaline agents, and their restoration by lining them with, basically, cellulose from vegetal sources. However, the possibility of strengthening the damaged cellulose has not been successfully explored, and the problem still persists. Until today, the development of biotechnology-based treatments in documentary heritage conservation has been scarce, although the ability of certain bacteria to produce cellulose takes to propose its use in the field of conservation and restoration of paper. The bacterial cellulose (BC) is chemically identical to the plant cellulose, but its macroscopic organization is different. Its unique properties (high degree of crystallinity, durability, strength and biocompatibility), makes it an excellent resource in different fields. The use of high-quality BC generated by Gluconacetobacter sucrofermentans CECT 7291 to restore damaged documents and to consolidate those that may be at risk of degradation, has been studied in this thesis, trying to prevent the document destruction, and to get reinforced papers with good mechanical, optical and structural properties. Protocols that allow the implementation of the BC as a reinforcing material were also developed. First of all, in order to select the culture medium that provides a cellulose suitable for its use in restoration, it has been evaluated the effect that the carbon and nitrogen sources from the culture medium have on the generated BC, keeping the temperature and the initial pH of the medium as fixed parameters, and performing the culture without shaking. The effect of the addition of 1% ethanol to the culture medium on BC properties was also evaluated. The cellulose layers were collected at four different times, characterizing in all of them the culture medium (pH and carbon source consumption), and the BC sheets (pH, dry weight and optical and mechanical properties). The best combination of carbon and nitrogen sources proved to be fructose plus yeast extract and corn steep liquor, with or without ethanol, which provided a good balance between the cellulose production and the consumption of carbon source, and generating BC sheets homogeneous and resistant. The addition of ethanol to the culture medium increased productivity but caused a noticeable decrement in pH. The BC layers generated with these optimized culture media, have been characterized in terms of tear and burst index, optical properties, scanning electron microscopy (SEM), X-ray diffraction, infrared Fourier transform spectroscopy (FTIR), polymerization degree, static and dynamic contact angles, and mercury intrusion porosimetry. Moreover it must be kept in mind that the restored materials should be stable over time. Therefore, the same characterization was performed after subjecting the layers of BC to an accelerated aging process. The results showed that the BC sheets obtained have a high crystallinity index, low internal porosity, good mechanical properties, and high stability over time. To develop working protocols to use this optimized BC in paper restoration, the first step was to select the samples to restore. Three types of model papers, made from mechanical pulp, chemical pulp and filter paper (before and after an accelerated aging process), and three old books purchased in the second hand market, were chosen. These specimens to be restored were also characterized in terms of its mechanical and physicochemical properties. The first protocol of restoration with BC to be evaluated is called linning. It consists on applying a reinforcing material to the document using an adhesive. The BC produced in the optimized culture medium with 1% ethanol was selected. An alkali purification method (1 hour at 90 °C in 1% NaOH) was applied, and wheat starch was selected as adhesive. The linning process was also carried out with Japanese paper (JP), a material commonly used in conservation, in order to compare both materials. It was concluded that there are no significant differences in the characteristics studied of the two types of reinforcing materials. The reinforced materials were characterized before and after undergoing to an accelerated aging. Papers lined with BC showed more marked differences in the optical properties that papers restored with JP. However, the text was more readable when BC was the reinforcing material. Wettability decreased with both types of reinforcement, although in the papers linned with BC it happened more marked and independently of the sample to restore. This is due to the closed structure of BC, which also leads to a decrement in air permeance. This study suggests that BC improves the deteriorated paper quality, without altering the information on it, and that this improvement is maintained over time. Therefore, the BC may be used as reinforcing material for linning, being more suitable than the JP to restore certain types of papers. The other restoration method to be evaluated was the in situ generation of BC over the paper to restore. For this purpose the culture medium without ethanol was selected, as the pH decrement caused by his presence would damage the document to restore. As purification method a heat treatment (24 hours at 65 °C) was chosen, less aggressive to the material to restore than the alkaline treatment. It was decided to apply the culture medium with the bacteria onto the material to restore with a brush. The reinforced material was characterized before and after an accelerated aging process. It was concluded that there was no substantial change in any characteristic, except for air permeance, which decreases very sharply after the generation of BC, getting a substantially air impermeable material. In general, it can be concluded that the ability of BC produced by Gluconacetobacter sucrofermentans CECT 7291 for its use as a reinforcing material in the restoration of paper documentary heritage, has been demonstrated. Also, two restoration methods, one ex situ and another in situ have been developed.