Avaliação e correlação clínica/tomográfica dos biótipos periodontais

O biótipo gengival, definido como a espessura da gengiva no sentido vestíbulo-lingual, desempenha importante papel na homeostasia dos tecidos periodontais, podendo ser considerado um preditor no sucesso em longo prazo das terapias periodontais e periimplantares. Assim sendo, é de suma importância reconhecer as dimensões do tecido gengival e as diferentes formas de qualificá-lo e principalmente quantificá-lo. Apesar de haver descrito na literatura inúmeros métodos para este fim, existem poucos estudos comparando a efetividade de um método em relação a outro. Desta maneira, este estudo buscou avaliar se há concordância entre avaliações clínicas e tomográficas na classificação do biótipo gengival, se existe correlação entre o biótipo gengival e a espessura óssea subjacente, além de descrever um novo método de tomada tomográfica que permita a análise quantitativa do biótipo gengival. Foram avaliados 12 indivíduos os quais realizaram tomografias computadorizadas de feixe cônico como exame imaginológico de diagnóstico ou planejamento pré-cirúrgico. Em cada paciente foram realizados quatro diferentes métodos de avaliação qualitativa da espessura gengival (transparência a sondagem, transgengival, visual através de fotografia e tomográfico), dois métodos de avaliação quantitativa (transgengival e tomográfico) da espessura gengival e avaliação da espessura óssea através da tomografia computadorizada de feixe cônico. Os resultados foram avaliados estatisticamente através do teste KAPPA, Teste t pareado e coeficiente de correlação de Pearson (pM0.05). O novo método de tomada tomográfica descrito neste estudo é eficaz para avaliação do biótipo gengival, havendo grande concordância (86,1% Kappa 0,51) e forte correlação (r=0,824) entre ele e o método transgengival (padrão ouro). A correlação entre a espessura óssea e a espessura gengival foi moderada quando utilizado o método transgengival e tomográfico (r=0,567 e r=0,653 respectivamente).

Novel silica membrane material for molecular sieve applications

Development of new silica membranes properties, e.g., molecular sieving properties, has been increasingly gaining importance in the last few years. A novel unsupported silica membrane, referred to as hydrophobic metal-doped silica, was developed by cobalt-doping within the organic templated silica matrix. The novel material was prepared by the acid-catalyzed hydrolysis and condensation process of tetraethylorthosilicate (TEOS) and methyltriethoxysilane (MTES), which is the precursor for methyl ligand covalently bounded to the silica matrix. The synthesis and surface properties of the novel unsupported silica membrane as well as the unsupported blank silica and modified silica membranes were revealed by surface and microstructural techniques, such as water contact angle measurement, FTIR, X-ray, Solid-state 29Si MAS NMR, TGA and N2 and CO2 adsorption measurements. The results showed that the thermal stability of the organic templated silica matrix was enhanced by cobalt-doping process. A hydrophobic microporous silica membrane material with high thermal stability up to ∼560 °C in oxidizing atmosphere and a narrow pore size distribution centered at 1.1 nm was obtained. Therefore, a novel precursor material for molecular sieve silica membranes applications has been achieved and developed.

Clarke, Daniell, autographed letter signed to Hugh Caukin; Windsor, Conn., 1 side (3 pages), 1652 February 11

Correspondence describing the tooth and gum decay of several of his children. Clarke requests that Caukin show his letter to John Winthrop and solicit his advice regarding potential courses of treatment.

A alfarroba como fonte de ingredientes bioactivos: fibra alimentar, polifenóis e ciclitóis

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Verhalten von Ladungsverstärkern bei verschiedenen Eingangsimpulsformen und -zeiten

In dieser Arbeit wird das Verhalten eines Ladungsverstärkers bei verschiedenen Eingangsimpulsformen und -zeiten untersucht. Als erstes wird der derzeitige Stand der Technik dargelegt und die Funktionsweise eines Ladungsverstärkers erläutert. Um die Messungen am Ladungsverstärker durchzuführen, wurde ein Messprogramm in LabView geschrieben und das verwendete Messsystem auf seine Tauglichkeit untersucht. Dazu wurde unter anderem eine Software entwickelt, die einen Ladungsverstärker simuliert. Nach einer kurzen Betrachtung möglicher Fehlereinflüsse, die bei der Digitalisierung von Messsignalen auftreten können, wurde eine Messunsicherheitsbetrachtung nach dem „Guide to the Expression of Uncertainty in Measurement“ (GUM) durchgeführt. Um den gemessenen Übertragungskoeffizienten des Ladungsverstärkers mit dem herkömmlichen Kalibrierverfahren (sinusförmiges Eingangssignal) vergleichbar zu machen, wurde eine Fourier-Analyse der Messsignale angewendet. Für den Frequenzbereich unterhalb von 20 kHz ergibt sich eine gute Übereinstimmung des Übertragungsverhaltens des Ladungsverstärkers mit dem herkömmlichen Kalibierverfahren bei Anregungen mit verschiedenen impulsförmigen Eingangssignalen. Oberhalb von 20 kHz weichen die Ergebnisse der zwei Messverfahren voneinander ab, da die maximale Signalanstiegsrate des Ladungsverstärkers überschritten wird.

Mancester from Kersal Moor

William Wyld; 1 ft. 9/16 in.x 1 ft. 7 21/64 in. (sheet); watercolour, touches of bodycolour, with gum arabic and scratching out

Natural resin research.

Loose-leaf.

In a nutshell suite : for piano solo /

Originally for orchestra, piano and Deagan percussion instruments.

Pete Appleton (Jablonowski) UM Baseball, 1924-1926, major league card, with New York Yankees in 1933

[Big League Chewing Gum baseball card]

The Evolving Nature of Small-Scale Forestry in Australia

Two forms of small-scale forestry are developing in Australia, each with different impacts on rural communities. One is based on growing short-rotation Eucalyptus globulus (blue gum) for pulp and the other on production of higher-value products from longer-rotation native hard-woods. Several impediments exist to further development of small-scale forestry, including the lack of a small-scale forestry culture, concerns over harvest rights, lack of market development, the long wait for returns, and satisfaction with current land uses. Nevertheless, the rapid increase in farm woodlot establishment in the past five years has paralleled the strong increase in the private industrial plantation estate. As markets develop and hindrances are overcome, landholders not previously interested in small-scale forestry may consider ita worthwhile land use.

Novel formulation strategies for the fabrication of lyophilised orally disintegrating tablets

Orally disintegrating Tablets (ODTs), also known as fast-disintegrating, fast-melt or fast-dissolving tablets, are a relatively novel dosage technology that involves the rapid disintegration or dissolution of the dosage form into a solution or suspension in the mouth without the need for water. The solution containing the active ingredients is swallowed, and the active ingredients are then absorbed through the gastrointestinal epithelium to reach the target and produce the desired effect. Formulation of ODTs was originally developed to address swallowing difficulties of conventional solid oral dosage forms (tablets and capsules) experienced by wide range of patient population, especially children and elderly. The current work investigates the formulation and development of ODTs prepared by freeze drying. Initial studies focused on formulation parameters that influence the manufacturing process and performance of lyophilised tablets based on excipients used in commercial products (gelatin and saccharides). The second phase of the work was followed up by comprehensive studies to address the essential need to create saccharide free ODTs using naturally accruing amino acids individually or in combinations. Furthermore, a factorial design study was carried out to investigate the feasibility of delivering multiparticulate systems of challenging drugs using a novel formulation that exploited the electrostatic associative interaction between gelatin and carrageenan. Finally, studies aimed to replace gelatin with ethically and morally accepted components to the end users were performed and the selected binder was used in factorial design studies to investigate and optimise ODT formulations that incorporated drugs with varies physicochemical properties. Our results show that formulation of elegant lyophilised ODTs with instant disintegration and adequate mechanical strength requires carful optimisation of gelatin concentration and bloom strength in addition to saccharide type and concentration. Successful formulation of saccharides free lyophilised ODTs requires amino acids that crystallise in the frozen state or display relatively high Tg', interact and integrate completely with the binder and, also, display short wetting time with the disintegrating medium. The use of an optimised mixture of gelatin, carrageenan and alanine was able to create viscous solutions to suspend multiparticulate systems and at the same time provide tablets with short disintegration times and adequate mechanical properties. On the other hand, gum arabic showed an outstanding potential for use as a binder in the formulation of lyophilised ODTs. Compared to gelatin formulations, the use of gum arabic simplified the formulation stages, shortened the freeze drying cycles and produced tablets with superior performance in terms of the disintegration time and mechanical strength. Furthermore, formulation of lyophilised ODTs based on gum arabic showed capability to deliver diverse range of drugs with advantages over commercial products.

The Single drop drying of heat-sensitive materials

The literature relating to the principles and practice of drying of materials, particularly those susceptible to thermal degradation or undesirable loss of volatile components, has been reviewed. Single droplets of heat-sensitive materials were dried whilst suspended in a horizontal wind tunnel from a specially-designed, rotating thermocouple which enabled direct observation of drying behaviour and continuous measurement of droplet temperature as drying progressed. The effects of drying air temperature and initial solids concentration on the potency of various antibiotics, viz. ampicillin, chloramphenicol, oxytetracycline, streptomycin and tetracycline, were assessed using a modified Drug Sensitivity Testing technique. Only ampicillin was heat-sensitive at temperatures above 100°C, e.g. at an air temperature of 115°C its zone diameter was reduced from 100% to 45%. Selected enzymes, viz. dextran sucrase and invertase, were also dried and their residual activities determined by High Performance Liquid Chromatography. The residual activity of dextran sucrase was rapidly reduced at temperatures above 65°C, and the residual activity of invertase reduced rapidly at temperatures above 65°C; but drying with short residence times will retain most of its activity. The performance of various skin-forming encapsulants, viz. rice and wheat starch, dextrin, coffee, skim milk, fructose, gelatine 60 and 150 Bloom, and gum arabic, was evaluated to determine their capabilities for retention of ethanol as a model volatile, under different operating conditions. The effects of initial solids concentration, air velocity and temperature were monitored for each material tested. Ethanol content was analysed by Gas Liquid Chromatography and in some cases dried crusts were removed for examination. Volatiles retention was concluded to depend in all cases upon the rate and nature of the skin formation and selective diffusion phenomena. The results provided further insight into the inter-relationship between temperature, residence time and thermal degradation of heat-sensitive materials. They should also assist in selection of the preferred dryer for such materials, and of the operating parameter to enable maximum retention of the required physico-chemical characteristics in the dried materials.

Polymer film formulations for the preparation of enteric pharmaceutical capsules

Objectives. Standard pharmaceutical capsules are designed to dissolve in the acidic environment of the stomach releasing the encapsulated contents for absorption. When release is required further along the gastrointestinal tract capsules can be coated with acid insoluble polymers to enable passage through the stomach and dissolution in the intestine. This paper describes formulations that have the potential to be used to produce two-piece hard capsules for post-gastric delivery without the requirement of an exterior coat. Methods. The formulation uses three polysaccharides: sodium alginate, hypromellose and gellan gum to provide acid insolubility and the ability to form capsules using standard industrial equipment. Key findings. The rheological profile, on cooling, of the base material, water content and thickness of the films were shown to be comparable with those of commercial capsules. The capsules remained intact for 2 h in 100 mm HCl at pH 1.2, and within 5 min of being removed from the acid and submerged in phosphate-buffered saline at pH 6.8 were ruptured. Conclusions. Selected formulations from this study have potential for use as delayed release capsules.

Reducing the risk of sexually transmitted infections in genitourinary medicine clinic patients:A systematic review and meta-analysis of behavioural interventions

Objectives: Are behavioural interventions effective in reducing the rate of sexually transmitted infections (STIs) among genitourinary medicine (GUM) clinic patients? Design: Systematic review and meta-analysis of published articles. Data sources: Medline, CINAHL, Embase, PsychINFO, Applied Social Sciences Index and Abstracts, Cochrane Library Controlled Clinical Trials Register, National Research Register (1966 to January 2004). Review methods: Randomised controlled trials of behavioural interventions in sexual health clinic patients were included if they reported change to STI rates or self reported sexual behaviour. Trial quality was assessed using the Jadad score and results pooled using random effects meta-analyses where outcomes were consistent across studies. Results: 14 trials were included; 12 based in the United States. Experimental interventions were heterogeneous and most control interventions were more structured than typical UK care. Eight trials reported data on laboratory confirmed infections, of which four observed a greater reduction in their intervention groups (in two cases this result was statistically significant, p<0.05). Seven trials reported consistent condom use, of which six observed a greater increase among their intervention subjects. Results for other measures of sexual behaviour were inconsistent. Success in reducing STIs was related to trial quality, use of social cognition models, and formative research in the target population. However, effectiveness was not related to intervention format or length. Conclusions: While results were heterogeneous, several trials observed reductions in STI rates. The most effective interventions were developed through extensive formative research. These findings should encourage further research in the United Kingdom where new approaches to preventing STIs are urgently required.

MRI pressure and stress measurement in novel homogeneous soft solids

This paper presents MRI measurements of a novel semi solid MR contrast agent to pressure. The agent is comprised of potassium chloride cross linked carageenan gum at a concentration of 2% w/v, with micron size lipid coated bubbles of air at a concentration of 3% v/v. The choice for an optimum suspending medium, the methods of production and the preliminary MRI results are presented herein. The carageenan gum is shown to be ideally elastic for compressions relating to volume changes less than 15%, in contrast to the inelastic gellan gum also tested. Although slightly lower than that of gellan gum, carageenan has a water diffusion coefficient of 1.72×10-9 m2.s-1 indicating its suitability to this purpose. RARE imaging is performed whilst simultaneously compressing test and control samples and a maximum sensitivity of 1.6% MR signal change per % volume change is found which is shown to be independent of proton density variations due to the presence of microbubbles and compression. This contrast agent could prove useful for numerous applications, and particularly in chemical engineering. More generally the method allows the user to non-invasively image with MRI any process that causes, within the solid, local changes either in bubble size or bubble shape. © 2008 American Institute of Physics.