Semiactive backstepping control for vibration attenuation in structures equipped with magnetorheological actuatorscat

This paper deals with the problem of semiactive vibration control of civil engineering structures subject to unknown external disturbances (for example, earthquakes, winds, etc.). Two kinds of semiactive controllers are proposed based on the backstepping control technique. The experimental setup used is a 6-story test structure equipped with shear-mode semiactive magnetorheological dampers being installed in the Washington University Structural Control and Earthquake Engineering Laboratory (WUSCEEL). The experimental results obtained have verified the effectiveness of the proposed control algorithms

A mixed H2/H∞-based semiactive control for vibration mitigation in flexible structures

In this paper, we address this problem through the design of a semiactive controller based on the mixed H2/H∞ control theory. The vibrations caused by the seismic motions are mitigated by a semiactive damper installed in the bottom of the structure. It is meant by semiactive damper, a device that absorbs but cannot inject energy into the system. Sufficient conditions for the design of a desired control are given in terms of linear matrix inequalities (LMIs). A controller that guarantees asymptotic stability and a mixed H2/H∞ performance is then developed. An algorithm is proposed to handle the semiactive nature of the actuator. The performance of the controller is experimentally evaluated in a real-time hybrid testing facility that consists of a physical specimen (a small-scale magnetorheological damper) and a numerical model (a large-scale three-story building)

QFT control for vibration reduction in structures equipped with MR dampers

This short paper addresses the problem of designing a QFT (quantitative feedback theory) based controllers for the vibration reduction in a 6-story building structure equipped with shear-mode magnetorheological dampers. A new methodology is proposed for characterizing the nonlinear hysteretic behavior of the MR damper through the uncertainty template in the Nichols chart. The design procedure for QFT control design is briefly presented

Innovation In Games

In this lecture we look at how innovation in games has moved from the creation of new genres, to the incorporation of new technology, that has unlocked new ways to play games. In particular we look at casual and social games, motion controllers, virtual reality, augmented reality, location-based games, mixed reality, and alternate reality.

El trabajo en equipo en el Proceso Administrativo y de Compras en OPL Carga de Bucaramanga

El proceso administrativo y de compras de OPL Carga tiene algunas falencias entre ellas: fallas en la Comunicación entre el personal operativo, no se realizan llamadas internas usando con frecuencia el email, produciendo la saturación de solicitudes las cuales terminan sin ser resueltas en cuanto a roles se refiere, no hay enfoque de procesos en vista que no se tiene claras las tareas de cada cargo, adicionalmente no hay claridad en los subprocesos, perjudicando el proceso con el aumento de costos, pérdida de tiempo, las responsabilidades de los funcionario no todas las veces se ejecutan en el tiempo asignado, el liderazgo compartido presenta ambigüedades. Objetivos: Definir el trabajo en equipo en el proceso administrativo y de compras en OPL carga de Bucaramanga. La investigación que a realizar es de tipo descriptivo, busca descubrir las falencias o características que permiten diseñar y desarrollar un modelo de solución para los problemas del equipo de OPL Carga S.A.S. Materiales y métodos: La investigación efectuada es de tipo descriptivo, el objetivo es definir el modelo del trabajo en equipo y describir las falencias en el proceso administrativo y de compras en OPL carga de Bucaramanga, que permitan obtener un diagnóstico integral que conlleve a la implementación de estrategias de solución. Resultados: Se identificaron las falencias en los siguientes aspectos: Variable comunicación, rendimiento, destrezas complementarias, propósito significativo y meta específicas de los funcionarios en OPL carga sección administrativa. Conclusiones: El modelo de trabajo en equipo que OPL aplica es jerárquico, en el que se ofrece estabilidad, seguridad, se toman decisiones en forma piramidal, mediante la planeación de tareas, la colaboración, igualdad y respeto por los miembros, trabajando en pro de la solución de problemas. Se construyó un plano conceptual que permitió exponer la interpretación que la estudiante tiene de las teorías, investigaciones y antecedentes válidos para la comprensión del problema investigado. Área comunicacional: Coordinar acciones tendientes para que los funcionarios respondan a tiempo los emails atenientes a su trabajo. Área condiciones de trabajo: Clarificar y diseñar las reglas de comportamiento al interior de los equipos de trabajo que redunden en el mejoramiento del mismo y la búsqueda de soluciones oportunas. Área metas específicas: Procurar mediante auditorías el cumplimiento de las metas y objetivos propuestos por cada equipo de trabajo.

Cozinha Virtual : uma prova de avaliação Neuropsicológica em Realidade Virtual

Esta dissertação surgiu com o intuito de criar uma prova neuropsicológica com todas as características das tradicionais provas de papel e lápis, com o acréscimo de vantagens que as novas tecnologias lhe podem trazer. Desta forma, desenvolveu-se um ambiente virtual com um propósito avaliativo, semelhante ao da prova em papel Trail Making Test e posteriormente ao seu desenvolvimento elaborou-se uma aplicação que foi testada em dois grupos. Compostas por um total de 47 elementos, estas amostras abrangeram população com e sem diagnóstico de problemas de alcoolismo (Síndrome de Dependência Alcoólica), que foram submetidas à execução das provas Cozinha Virtual e Trail Making Test. Os dados daí resultantes comprovam a capacidade desta prova avaliar os défices cognitivos ao nível da flexibilidade cognitiva, da capacidade de sequenciação, de procura visual, velocidade motora e capacidades atencionais e confirmam também a sua correlação com a prova que lhe deu origem.

Design, testing, and simulation of fibre composite leaf springs for heavy axle loads

This paper summarizes the design, manufacturing, testing, and finite element analysis (FEA) of glass-fibre-reinforced polyester leaf springs for rail freight vehicles. FEA predictions of load-deflection curves under static loading are presented, together with comparisons with test results. Bending stress distribution at typical load conditions is plotted for the springs. The springs have been mounted on a real wagon and drop tests at tare and full load have been carried out on a purpose-built shaker rig. The transient response of the springs from tests and FEA is presented and discussed.

Dynamic virtual environments using really simple syndication

This paper investigates the use of really simple syndication (RSS) to dynamically change virtual environments. The case study presented here uses meteorological data downloaded from the Internet in the form of an RSS feed, this data is used to simulate current weather patterns in a virtual environment. The downloaded data is aggregated and interpreted in conjunction with a configuration file, used to associate relevant weather information to the rendering engine. The engine is able to animate a wide range of basic weather patterns. Virtual reality is a way of immersing a user into a different environment, the amount of immersion the user experiences is important. Collaborative virtual reality will benefit from this work by gaining a simple way to incorporate up-to-date RSS feed data into any environment scenario. Instead of simulating weather conditions in training scenarios, actual weather conditions can be incorporated, improving the scenario and immersion.

Use of auditory cues for wayfinding assistance in virtual environment: music aids route decision

This paper addresses the crucial problem of wayfinding assistance in the Virtual Environments (VEs). A number of navigation aids such as maps, agents, trails and acoustic landmarks are available to support the user for navigation in VEs, however it is evident that most of the aids are visually dominated. This work-in-progress describes a sound based approach that intends to assist the task of 'route decision' during navigation in a VE using music. Furthermore, with use of musical sounds it aims to reduce the cognitive load associated with other visually as well as physically dominated tasks. To achieve these goals, the approach exploits the benefits provided by music to ease and enhance the task of wayfinding, whilst making the user experience in the VE smooth and enjoyable.

Generic control interface for networked haptic virtual environments

As Virtual Reality pushes the boundaries of the human computer interface new ways of interaction are emerging. One such technology is the integration of haptic interfaces (force-feedback devices) into virtual environments. This modality offers an improved sense of immersion to that achieved when relying only on audio and visual modalities. The paper introduces some of the technical obstacles such as latency and network traffic that need to be overcome for maintaining a high degree of immersion during haptic tasks. The paper describes the advantages of integrating haptic feedback into systems, and presents some of the technical issues inherent in a networked haptic virtual environment. A generic control interface has been developed to seamlessly mesh with existing networked VR development libraries.

Visual eye disease simulator

Visually impaired people have a very different view of the world such that seemingly simple environments as viewed by a ‘normally’ sighted people can be difficult for people with visual impairments to access and move around. This is a problem that can be hard to fully comprehend by people with ‘normal vision’ even when guidelines for inclusive design are available. This paper investigates ways in which image processing techniques can be used to simulate the characteristics of a number of common visual impairments in order to provide, planners, designers and architects, with a visual representation of how people with visual impairments view their environment, thereby promoting greater understanding of the issues, the creation of more accessible buildings and public spaces and increased accessibility for visually impaired people in everyday situations.

Immersive co-operative psychological virtual environments (ICPVE)

Virtual Reality (VR) has been used in a variety of forms to assist in the treatment of a wide range of psychological illness. VR can also fulfil the need that psychologists have for safe environments in which to conduct experiments. Currently the main barrier against using this technology is the complexity in developing applications. This paper presents two different co-operative psychological applications which have been developed using a single framework. These applications require different levels of co-operation between the users and clients, ranging from full psychologist involvement to their minimal intervention. This paper will also discuss our approach to developing these different environments and our experiences to date in utilising these environments.

Estimation of distances in virtual environments using size constancy

It is reported in the literature that distances from the observer are underestimated more in virtual environments (VEs) than in physical world conditions. On the other hand estimation of size in VEs is quite accurate and follows a size-constancy law when rich cues are present. This study investigates how estimation of distance in a CAVETM environment is affected by poor and rich cue conditions, subject experience, and environmental learning when the position of the objects is estimated using an experimental paradigm that exploits size constancy. A group of 18 healthy participants was asked to move a virtual sphere controlled using the wand joystick to the position where they thought a previously-displayed virtual cube (stimulus) had appeared. Real-size physical models of the virtual objects were also presented to the participants as a reference of real physical distance during the trials. An accurate estimation of distance implied that the participants assessed the relative size of sphere and cube correctly. The cube appeared at depths between 0.6 m and 3 m, measured along the depth direction of the CAVE. The task was carried out in two environments: a poor cue one with limited background cues, and a rich cue one with textured background surfaces. It was found that distances were underestimated in both poor and rich cue conditions, with greater underestimation in the poor cue environment. The analysis also indicated that factors such as subject experience and environmental learning were not influential. However, least square fitting of Stevens’ power law indicated a high degree of accuracy during the estimation of object locations. This accuracy was higher than in other studies which were not based on a size-estimation paradigm. Thus as indirect result, this study appears to show that accuracy when estimating egocentric distances may be increased using an experimental method that provides information on the relative size of the objects used.

Operator performance evaluation of controlled depth of field in a stereographically displayed virtual environment

Retinal blurring resulting from the human eye's depth of focus has been shown to assist visual perception. Infinite focal depth within stereoscopically displayed virtual environments may cause undesirable effects, for instance, objects positioned at a distance in front of or behind the observer's fixation point will be perceived in sharp focus with large disparities thereby causing diplopia. Although published research on incorporation of synthetically generated Depth of Field (DoF) suggests that this might act as an enhancement to perceived image quality, no quantitative testimonies of perceptional performance gains exist. This may be due to the difficulty of dynamic generation of synthetic DoF where focal distance is actively linked to fixation distance. In this paper, such a system is described. A desktop stereographic display is used to project a virtual scene in which synthetically generated DoF is actively controlled from vergence-derived distance. A performance evaluation experiment on this system which involved subjects carrying out observations in a spatially complex virtual environment was undertaken. The virtual environment consisted of components interconnected by pipes on a distractive background. The subject was tasked with making an observation based on the connectivity of the components. The effects of focal depth variation in static and actively controlled focal distance conditions were investigated. The results and analysis are presented which show that performance gains may be achieved by addition of synthetic DoF. The merits of the application of synthetic DoF are discussed.