999 resultados para Regras de categoria de produto (RCP)
Resumo:
The aim of the present study was to extract vegetable oil from brown linseed (Linum usitatissimum L.), determine fatty acid levels, the antioxidant capacity of the extracted oil and perform a rapid economic assessment of the SFE process in the manufacture of oil. The experiments were conducted in a test bench extractor capable of operating with carbon dioxide and co-solvents, obeying 23 factorial planning with central point in triplicate, and having process yield as response variable and pressure, temperature and percentage of cosolvent as independent variables. The yield (mass of extracted oil/mass of raw material used) ranged from 2.2% to 28.8%, with the best results obtained at 250 bar and 50ºC, using 5% (v/v) ethanol co-solvent. The influence of the variables on extraction kinetics and on the composition of the linseed oil obtained was investigated. The extraction kinetic curves obtained were based on different mathematical models available in the literature. The Martínez et al. (2003) model and the Simple Single Plate (SSP) model discussed by Gaspar et al. (2003) represented the experimental data with the lowest mean square errors (MSE). A manufacturing cost of US$17.85/kgoil was estimated for the production of linseed oil using TECANALYSIS software and the Rosa and Meireles method (2005). To establish comparisons with SFE, conventional extraction tests were conducted with a Soxhlet device using petroleum ether. These tests obtained mean yields of 35.2% for an extraction time of 5h. All the oil samples were sterilized and characterized in terms of their composition in fatty acids (FA) using gas chromatography. The main fatty acids detected were: palmitic (C16:0), stearic (C18:0), oleic (C18:1), linoleic (C18:2n-6) and α-linolenic (C18:3n-3). The FA contents obtained with Soxhlet dif ered from those obtained with SFE, with higher percentages of saturated and monounsaturated FA with the Soxhlet technique using petroleum ether. With respect to α-linolenic content (main component of linseed oil) in the samples, SFE performed better than Soxhlet extraction, obtaining percentages between 51.18% and 52.71%, whereas with Soxhlet extraction it was 47.84%. The antioxidant activity of the oil was assessed in the β-carotene/linoleic acid system. The percentages of inhibition of the oxidative process reached 22.11% for the SFE oil, but only 6.09% for commercial oil (cold pressing), suggesting that the SFE technique better preserves the phenolic compounds present in the seed, which are likely responsible for the antioxidant nature of the oil. In vitro tests with the sample displaying the best antioxidant response were conducted in rat liver homogenate to investigate the inhibition of spontaneous lipid peroxidation or autooxidation of biological tissue. Linseed oil proved to be more efficient than fish oil (used as standard) in decreasing lipid peroxidation in the liver tissue of Wistar rats, yielding similar results to those obtained with the use of BHT (synthetic antioxidant). Inhibitory capacity may be explained by the presence of phenolic compounds with antioxidant activity in the linseed oil. The results obtained indicate the need for more detailed studies, given the importance of linseed oil as one of the greatest sources of ω3 among vegetable oils
Resumo:
Objetivou-se, com este trabalho, avaliar os efeitos da adição de diferentes níveis de enzima mais levedura na dieta de bovinos sobre a digestibilidade aparente dos nutrientes e o desempenho em confinamento, utilizando-se 18 animais machos, mestiços, de origem leiteira, com peso vivo (PV) médio de 190±10 kg e 12 meses de idade, e 27 animais da raça Guzerá com PV médio de 325 kg e idade média de 27 meses. Os níveis de enzima mais levedura foram zero (controle), 5 g de enzima (E) mais 5 g de levedura (L) e 10 g de E mais 5 g de L por animal por dia. Todos os animais receberam a mesma dieta, constituída de 65% de silagem (50% de milho:50% de sorgo) e 35% de concentrado composto de milho (24,6%), farelo de algodão (7,4%), uréia (1,2%), sal mineralizado (0,54%) e calcário (0,86%). Esta dieta apresentava 12,4% de PB; 10,1 MJEM/kg MS e 41,1% de FDN. A adição de enzima mais levedura não alterou o consumo de MS (3,31% do PV ou 126,6 g/kg PV0,75), e CDA da MS (63,0%), PB (68,2%), EE (83,3%), CHOT (61,3%), FDN (47,2%), FDA (43,8%) e valor de NDT (62,8%). O GMD e o CMS diminuíram de forma quadrática e a CA alimentar piorou linearmente, em função dos dias de confinamento. O fornecimento de enzima mais levedura para bovinos de corte não traz benefícios nutricionais ou de desempenho.
Resumo:
This paper analyzes the political participation of Social Workers at the Social Service Regional Council Region 14th. The theoretical and methodological framework of this investigation has as its perspective the totality of social life and its determining relations within the object of study. To the production, analysis and collecting of data it was used a qualitative approach considering a bibliographical and documental research as well as a series of twelve interviews with 2005-2008 and 2008-2011 managing counselors of CRESS/RN. It was also used the data obtained from other special interviews held with the social workers in the period between 2007 and 2008. The results of this study allow and affirm the political dimension of Caseworkers and the CRESS/RN as a space of political activity with opportunities for effective and collective elaboration of strategies in order to reach the fulfillment of the ethical and professional policy of the Social Work. From a historical viewpoint, the beginning of this process is marked by the struggle for democracy, the end of military dictatorship, the establishment of the State of Human Rights. The Democratization of the so called Federal Council of Social Workers and its Regional Councils of Social Workers, CFAS / CRAS, respectively, area a result of the participation of the category in an effort to fight for democratization in Brazil. The objective of this research, so, is to understand which the socio-historical determinants are, that focus objectively and subjectively in the demobilization of social workers in CRESS Region 14th - in the contemporary and historical context. Among the results obtained we identified the ignorance of some professional workers and also of some advisors, regarding the existence and the role of the Council, as well as the commercialization of Education that compromises the quality of the professional training in its theoretical and methodological, ethical and political dimensions. According to our understanding, this shows a the presence of a non-critical professional profile based on a false reality, on the precariousness of employment contracts which undermine the political organization and submit the worker to various social exploring mechanisms such as double shift and ultimately the fragility of the management of the Regional Council -, as a consequence of the offensive capitalist system that ideologically invests to stop the political organization founded in a critical and democratic perspective. The low participation of some advisors and, in general, the category in CRESS / RN, despite its objective conditions, is a reality and it is presented to us as a challenge to future managements and policy consolidation to society. Inasmuch as the category intends to guarantee the high quality of its social workers, the demands of future counselors, their skills and abilities in dealing with regulatory issues, administrative policies that pervade the everyday life of CRESS / RN are necessary
Resumo:
Software Product Line (SPL) consists of a software development paradigm, whose main focus is to identify features common and variability among applications in a specific domain. An LPS is designed to attend all products requirements from its product family. These requirements and LPS may have changes over time due to several factors, such as evolution of product requirements, evolution of the market, evolution of SLP process, evolution of the technologies used to develop the products. To handle these changes, LPS should be modified and evolve in order to not become obsolete, and adapt itself to new requirements. The Changes Impact Analysis is an activity that understand and identify what consequences these changes are cause on LPS. Impact Analysis on LPS may be supported by traceability relationships, which identify relationships between artefacts created during all phases of software development. Despite the solutions of change impact analysis based on traceability for software, there is a lack of solutions for assessing the change impact analysis based on traceability for LPS, since existing solutions do not include estimates specific to the artefacts of LPS. Thus, this paper proposes a process of change impact analysis and an tool for assessing the change impact through traceability of artefacts in LPS. For this purpose, we specified a process of change impact analysis that considers artifacts produced during the development of LPS. We have also implemented a tool which allows estimating and identifying artefacts and products of LPS affected from changes in other products, changes in class, changes in features, changes between releases of LPS and artefacts related to changes in core assets and variability. Finally, the results were evaluated through metrics
Resumo:
Product derivation tools are responsible for automating the development process of software product lines. The configuration knowledge, which is responsible for mapping the problem space to the solution space, plays a fundamental role on product derivation approaches. Each product derivation approach adopts different strategies and techniques to manage the existing variabilities in code assets. There is a lack of empirical studies to analyze these different approaches. This dissertation has the aim of comparing systematically automatic product derivation approaches through of the development of two different empirical studies. The studies are analyzed under two perspectives: (i) qualitative that analyzes the characteristics of approaches using specific criteria; and (ii) quantitative that quantifies specific properties of product derivation artifacts produced for the different approaches. A set of criteria and metrics are also being proposed with the aim of providing support to the qualitative and quantitative analysis. Two software product lines from the web and mobile application domains are targets of our study
Resumo:
Through the adoption of the software product line (SPL) approach, several benefits are achieved when compared to the conventional development processes that are based on creating a single software system at a time. The process of developing a SPL differs from traditional software construction, since it has two essential phases: the domain engineering - when common and variables elements of the SPL are defined and implemented; and the application engineering - when one or more applications (specific products) are derived from the reuse of artifacts created in the domain engineering. The test activity is also fundamental and aims to detect defects in the artifacts produced in SPL development. However, the characteristics of an SPL bring new challenges to this activity that must be considered. Several approaches have been recently proposed for the testing process of product lines, but they have been shown limited and have only provided general guidelines. In addition, there is also a lack of tools to support the variability management and customization of automated case tests for SPLs. In this context, this dissertation has the goal of proposing a systematic approach to software product line testing. The approach offers: (i) automated SPL test strategies to be applied in the domain and application engineering, (ii) explicit guidelines to support the implementation and reuse of automated test cases at the unit, integration and system levels in domain and application engineering; and (iii) tooling support for automating the variability management and customization of test cases. The approach is evaluated through its application in a software product line for web systems. The results of this work have shown that the proposed approach can help the developers to deal with the challenges imposed by the characteristics of SPLs during the testing process
Resumo:
The tracking between models of the requirements and architecture activities is a strategy that aims to prevent loss of information, reducing the gap between these two initial activities of the software life cycle. In the context of Software Product Lines (SPL), it is important to have this support, which allows the correspondence between this two activities, with management of variability. In order to address this issue, this paper presents a process of bidirectional mapping, defining transformation rules between elements of a goaloriented requirements model (described in PL-AOVgraph) and elements of an architectural description (defined in PL-AspectualACME). These mapping rules are evaluated using a case study: the GingaForAll LPS. To automate this transformation, we developed the MaRiPLA tool (Mapping Requirements to Product Line Architecture), through MDD techniques (Modeldriven Development), including Atlas Transformation Language (ATL) with specification of Ecore metamodels jointly with Xtext , a DSL definition framework, and Acceleo, a code generation tool, in Eclipse environment. Finally, the generated models are evaluated based on quality attributes such as variability, derivability, reusability, correctness, traceability, completeness, evolvability and maintainability, extracted from the CAFÉ Quality Model
Resumo:
The approach Software Product Line (SPL) has become very promising these days, since it allows the production of customized systems on large scale through product families. For the modeling of these families the Features Model is being widely used, however, it is a model that has low level of detail and not may be sufficient to guide the development team of LPS. Thus, it is recommended add the Features Model to other models representing the system from other perspectives. The goals model PL-AOVgraph can assume this role complementary to the Features Model, since it has a to context oriented language of LPS's, which allows the requirements modeling in detail and identification of crosscutting concerns that may arise as result of variability. In order to insert PL-AOVgraph in development of LPS's, this paper proposes a bi-directional mapping between PL-AOVgraph and Features Model, which will be automated by tool ReqSys-MDD. This tool uses the approach of Model-Driven Development (MDD), which allows the construction of systems from high level models through successive transformations. This enables the integration of ReqSys-MDD with other tools MDD that use their output models as input to other transformations. So it is possible keep consistency among the models involved, avoiding loss of informations on transitions between stages of development
Resumo:
The Exception Handling (EH) is a widely used mechanism for building robust systems. In Software Product Line (SPL) context it is not different. As EH mechanisms are embedded in most of mainstream programming languages (like Java, C# and C++), we can find exception signalers and handlers spread over code assets associated to common and variable SPL features. When exception signalers and handlers are added to an SPL in an unplanned way, one of the possible consequences is the generation of faulty family instances (i.e., instances on which common or variable features signal exceptions that are mistakenly caught inside the system). In this context, some questions arise: How exceptions flow between the optional and alternative features an LPS? Aiming at providing answers to these questions, this master thesis conducted an exploratory study, based on code inspection and static analysis code, whose goal was to categorize the main ways which exceptions flow in LPSs. To support the study, we developed an static analysis tool called PLEA (Product Line Exception Analyzer) that calculates the exceptional flows of LPSs, and categorize these flows according to the features associated with handlers and signalers. Preliminary results showed that some types of exceptional flows have more potential to yield failures in exceptional behavior of SLPs
Resumo:
Software Products Lines (SPL) is a software engineering approach to developing software system families that share common features and differ in other features according to the requested software systems. The adoption of the SPL approach can promote several benefits such as cost reduction, product quality, productivity, and time to market. On the other hand, the SPL approach brings new challenges to the software evolution that must be considered. Recent research work has explored and proposed automated approaches based on code analysis and traceability techniques for change impact analysis in the context of SPL development. There are existing limitations concerning these approaches such as the customization of the analysis functionalities to address different strategies for change impact analysis, and the change impact analysis of fine-grained variability. This dissertation proposes a change impact analysis tool for SPL development, called Squid Impact Analyzer. The tool allows the implementation of change impact analysis based on information from variability modeling, mapping of variability to code assets, and existing dependency relationships between code assets. An assessment of the tool is conducted through an experiment that compare the change impact analysis results provided by the tool with real changes applied to several evolution releases from a SPL for media management in mobile devices
Resumo:
Web services are computational solutions designed according to the principles of Service Oriented Computing. Web services can be built upon pre-existing services available on the Internet by using composition languages. We propose a method to generate WS-BPEL processes from abstract specifications provided with high-level control-flow information. The proposed method allows the composition designer to concentrate on high-level specifi- cations, in order to increase productivity and generate specifications that are independent of specific web services. We consider service orchestrations, that is compositions where a central process coordinates all the operations of the application. The process of generating compositions is based on a rule rewriting algorithm, which has been extended to support basic control-flow information.We created a prototype of the extended refinement method and performed experiments over simple case studies
Resumo:
This present study aimed to examine the use of games with rules in working with math education in regular classes included in Elementary School, in the municipal education schools of Natal/RN, observing the learning process and development of all students, especially those with disabilities. The theoretical references used are based on Vygotsky's works and other authors from the historical-cultural perspective, as well as researchers in the field of Inclusive Education and Mathematics Education. The investigation was based on the qualitative research guidelines, with the application of semi-structured interviews with educational coordinators and teachers from the schools involved as well as classroom observations, looking for, in the speeches of those involved and in their teaching practices, elements to reflect on the Mathematics Inclusive Education, the use of games with rules -starting from its goals, the participation of disabled students, the pedagogical mediations, up to its accessibility - and from the learning of disabled students. The analysis results showed that the concepts underlying the development of inclusive teaching practices still refer to the clinical-medical paradigm, understanding the student with disabilities from their deficiencies; which teachers use, in their majority, the mathematical games with rules in their classes, but which the teaching mediation, during these activities, still needs to be qualified so that they can, effectively, contribute to the learning and development of all students; students with disabilities do not always participate in games with others colleagues; games with rules are rarely accessible; and that the Universal Design principles are not adopted in the selected classrooms for this study. Thus, it is clear that much remains to be done so that Mathematics Education can contribute to the learning and development of all students, and among those actions the teacher continuing education is recommended
Resumo:
Objetivou-se estudar as informações nutricionais de carnes ovinas comercializadas, comparativamente às determinadas por análises laboratoriais, utilizando-se 18 ovinos Ile de France x Ideal (cordeiros não castrados, ovelhas adultas de descarte e capões adultos de descarte). Os cordeiros foram desmamados com 17 kg e abatidos aos 32 kg. As ovelhas e capões, com 55 kg. As informações nutricionais dos rótulos de carne ovina embalada foram obtidas através do contato direto com 19 empresas que comercializam carne ovina. A maioria das empresas avaliadas não utiliza a informação nutricional na rotulagem da carne ovina embalada e também não descrimina a categoria ovina dos cortes da carcaça disponibilizados para venda. Os valores das informações nutricionais, analisadas laboratorialmente, da carne ovina evidenciaram, de modo geral, diferenças entre as categorias ovinas e seus respectivos cortes da carcaça para: valor calórico, teor de carboidratos, proteínas, gorduras totais, colesterol, cálcio e ferro. As empresas estudadas, de maneira geral, desconhecem ou ignoram tais diferenças entre as categorias e os cortes da carcaça ovina quanto às informações nutricionais, sendo necessário melhorar os rótulos comerciais dos cortes da carcaça ovina, a fim de informar o consumidor, de maneira mais simples, sobre o produto que está sendo adquirido para o consumo.
Resumo:
The elaboration of avocado products for commercialization keeping their characteristics of fresh product has been limited. The cut avocado darkens quickly and their sensorial characteristics are modified with the storage. In the present research, the sensorial parameters, microbiological stability, and peroxidase and polyphenoloxidase activity were evaluated in guacamole added with ascorbic acid and conserved under low temperature, by using avocado variety Hass. Products were conditioned in polyethylene+nylon packages with and without vacuum application; then, they were subjected to the slow and fast freezing (-18 degrees C) and stored in freezer (-18 degrees C). Evaluations were performed at the moment of elaboration of the product (t0) and at 3, 7 and 30 days post-storage. At t30, samples were kept under refrigeration (4 +/- 1 degrees C) and evaluated at 3, 5 and 7 days. After the 30 days of storage, -18 degrees C under freezing, followed by thawing and keeping at 4 +/- 1 degrees C for 7 days, the notes for the sensorial parameters decreased. The peroxidase activity was totally inhibited in the elaborated product and the polifenol oxidase activity considerably decreased in the guacamole (20.07 mM catechol/g fresh matter) relative to those in the fruit (58.31 mM catechol/g fresh matter), however with no significant variation during storage (at -18 degrees C). The samples were microbiologically stable under the conditions of the present study. The addition of ascorbic acid contributed to the conservation of the frozen avocado product by decreasing the enzymatic activity. However, the sensorial parameters are prejudiced under thawing and storage at 4 +/- 1 degrees C.
Resumo:
Since the sport of football field as the main focus and it is directly related to sports phenomenon up to understood of changes occurring in the rules and game systems over the years. The main aim was analyzed the historical changes in the soccer with relation to the game systems and rules, and their consequences. The research is qualitative type and uses the bibliographic collection as instrument. For this, it was searched in the published literature data about the present study subject. The results indicated for a soccer tactics and rules set that it was constructed with the evolution and consolidation of the soccer. It was concluded that the game system had suffered many alterations during the historical process of soccer development, but this process leaved poured the spectacle of the game. In the other way, the rules had suffered great alterations with regard to the soccer primaries, but after its consolidation as universal sport, they had remained almost the same, having assisted in the maintenance of the soccer characteristics and status.