Susceptibility of Argentinean Biomphalaria tenagophila and Biomphalaria straminea to infection by Schistosoma mansoni and the possibility of geographic expansion of mansoni schistosomiasis

Introduction Human migration and the presence of natural vectors (mollusks) of Schistosoma mansoni are the primary causes of the expansion of mansoni schistosomiasis into southern areas of South America. Water conditions are favorable for the expansion of this disease because of the extensive hydrographic network, which includes the basins of the Paraná and Uruguay rivers and favors mollusk reproduction. These rivers also aid agriculture and tourism in the area. Despite these favorable conditions, natural infection by S. mansoni has not yet been reported in Argentina, Uruguay, or Paraguay. Methods Two species of planorbid from Argentina, Biomphalaria straminea and B. tenagophila, were exposed to the miracidia of five Brazilian strains of S. mansoni. Results Biomphalaria tenagophila (Atalaya, Buenos Aires province) was infected with the SJS strain (infection rate 3.3%), confirming the experimental susceptibility of this Argentinian species. Biomphalaria straminea (Rio Santa Lucía, Corrientes province) was susceptible to two Brazilian strains: SJS (infection rate 6.7%) and Sergipe (infection rate 6.7%). Conclusions These results demonstrate that species from Argentina have the potential to be natural hosts of S. mansoni and that the appearance of foci of mansoni schistosomiasis in Argentina is possible.

Vila Galé: International expansion to Mozambique

The purpose of this project is to understand the outcomes of the implementation of 4 star city hotel from the Vila Galé brand in Maputo, Mozambique, and the conditions under which such project would be financially worthy. Both the tourism market in Mozambique and the Vila Galé Hotels company were studied, aligned with a projection of the operational results. The conclusions allow to infer that this is a project aligned with the overall company strategy and that the sector’s growth prospects in Mozambique would allow to achieve positive results that encourage Vila Galé to invest.

Património Cultural Imaterial: MEMORIAMEDIA e-Museu - métodos, técnicas e práticas / Intagible Cultural Heritage: MEMORIAMEDIA e-Museum - methods, techniques and practices

O projeto MEMORIAMEDIA tem como objetivos o estudo, a inventariação e divulgação de manifestações do património cultural imaterial: expressões orais; práticas performativas; celebrações; o saber-fazer de artes e ofícios e as práticas e conhecimentos relacionados com a natureza e o universo. O MEMORIAMEDIA iniciou em 2006, em pleno debate nacional e internacional das questões do património cultural imaterial. Este livro cruza essas discussões teóricas, metodológicas e técnicas com a caracterização do MEMORIAMEDIA. Os resultados do projeto, organizados num inventário nacional, estão publicados no site www.memoriamedia.net, onde se encontram disponíveis para consulta e partilha. Filomena Sousa é investigadora de pós-doutoramento em antropologia (FCSH/UNL) e doutorada em sociologia (ISCTE-IUL). Membro integrado no Instituto de Estudos de Literatura e Tradição - patrimónios, artes e culturas (IELT) da FCSH/UNL e consultora da Memória Imaterial CRL – organização não-governamental autora e gestora do projeto MEMORIAMEDIA. Desenvolve investigação no âmbito das políticas e instrumentos de identificação, documentação e salvaguarda do património cultural imaterial e realizou vários documentários sobre expressões culturais.

Development and application of NMR techniques to study water-in-CO2 microemulsions

Self-assembly is a phenomenon that occurs frequently throughout the universe. In this work, two self-assembling systems were studied: the formation of reverse micelles in isooctane and in supercritical CO2 (scCO2), and the formation of gels in organic solvents. The goal was the physicochemical study of these systems and the development of an NMR methodology to study them. In this work, AOT was used as a model molecule both to comprehensively study a widely researched system water/AOT/isooctane at different water concentrations and to assess its aggregation in supercritical carbon dioxide at different pressures. In order to do so an NMR methodology was devised, in which it was possible to accurately determine hydrodynamic radius of the micelle (in agreement with DLS measurements) using diffusion ordered spectroscopy (DOSY), the micellar stability and its dynamics. This was mostly assessed by 1H NMR relaxation studies, which allowed to determine correlation times and size of correlating water molecules, which are in agreement with the size of the shell that interacts with the micellar layer. The encapsulation of differently-sized carbohydrates was also studied and allowed to understand the dynamics and stability of the aggregates in such conditions. A W/CO2 microemulsion was prepared using AOT and water in scCO2, with ethanol as cosurfactant. The behaviour of the components of the system at different pressures was assessed and it is likely that above 130 bar reverse microemulsions were achieved. The homogeneity of the system was also determined by NMR. The formation of the gel network by two small molecular organogelators in toluene-d8 was studied by DOSY. A methodology using One-shot DOSY to perform the spectra was designed and applied with success. This yielded an understanding about the role of the solvent and gelator in the aggregation process, as an estimation of the time of gelation.

Occurrence of Lutzomyia longipalpis andhuman and canine cases of visceral leishmaniasis and evaluation of their expansion in the Northwest region of the State of São Paulo, Brazil

Abstract: INTRODUCTION This paper aims to describe the dispersion of Lutzomyia longipalpis and the autochthonous occurrence of visceral leishmaniasis (VL) in the Northwest region of the State of São Paulo between 2007 and 2013 and to analyze their expansion. METHODS Information about the vector and associated cases was described using maps. The incidence, mortality, and lethality of human visceral leishmaniasis (HVL) were calculated. In municipalities in which more than one HVL case occurred, incidences were calculated according to census sector, and spatial and spatiotemporal clusters were identified. RESULTS The first case of HVL was reported in the municipality of Jales in 2007. By 2013, the vector and the disease had expanded from west to east, with the vector being detected in 29 municipalities. A total of 11 municipalities had cases of canine visceral leishmaniasis (CVL), and six had cases of HVL. Vector expansion occurred by vicinity with previously infested municipalities, and the expansion of VL was related to the major highways and the capital municipalities of the micro-regions in the study area. The highest incidence of HVL occurred in children between 0-4 years old, and the highest mortality and lethality occurred among persons aged 60 and older. The occurrence of HLV was more intense in the peripheral areas of municipalities with the disease. CONCLUSIONS The findings of this study may be useful for improving VL surveillance and control activities by slowing VL expansion and/or mitigating VL effects when they occur.

Geopolymers as infill material for conservation of azulejos

The restoration materials currently used to fill gaps in architectural historical azulejos (e.g. lime or organic resin pastes) usually show serious drawbacks in terms of compatibility, effectiveness and durability. The existing solutions do not fully protect azulejos in outdoor conditions and frequently result in further deterioration. Geopolymers can be a potential solution for azulejo lacunae infill given the chemical-mineralogical similitude to the ceramic body, and also the durability and versatile range of physical properties that can be obtained through the manipulation of their formulation and curing conditions. This work presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in azulejos or to act as “cold” cast ceramic tile surrogates reproducing missing azulejo fragments. The formulation of geopolymers, namely the type of activators, the aluminosilicate source, the amount of water (to meet adequate workability requirements) and curing conditions were studied. The need for post-curing desalination was also considered envisaging their application in the restoration of outdoor architectural historical azulejos frequently exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of azulejos are also discussed. Several techniques were used to study the chemical and physical behavior of geopolymers, namely FT-IR, XRD, MIP, SEM-EDS, WDXRF, electrical conductivity, open porosity, bending strength, adhesion strength, water vapour permeability, thermal expansion and hydric expansion. The results indicate that geopolymers are a promising material for restoration of azulejos, exhibiting some properties, such as adhesion to the ceramic substrate, higher than inorganic materials used nowadays, such as aerial lime based pastes.

Plasma nitriding of AA2011 alloy and surface characterization by NDT techniques

Al-Cu alloys are widely used in the aerospace and automotive industries due to their high specific strength in some tempered conditions. However, due to poor corrosion and wear resistance, they are often anodized and/or painted. Plasma nitriding has been proposed as an alternative, though the developments in this technique are still in a recent stage for Al alloys. Electrical characterization techniques are well implemented NDTs in the industry because of good accuracy associated with lower cost, compared to other methods. Some, like eddy currents and 4-point probe techniques, are often used in coating inspection. The objective of this study was to perform Al nitriding at low temperatures to minimize the tempering initial condition damage and to assess the feasibility of eddy currents technique as a method for evaluating surface properties. The work developed can be divided in two stages. The first one was the process tuning, done at the Shibaura Institute of Technology, in Tokyo; and the second was the electrical characterization done in Faculdade de Ciências e Tecnologia, UNL. Low temperature nitriding of AA2011 alloy specimens was successfully achieved. Electrical conductivity results show that lift-off measurements by eddy currents testing can be related to surface properties.

Endovascular techniques for placement of long-term chemotherapy catheters

PURPOSE: To analyze the results from using endovascular techniques to place long-term chemotherapy catheters when advancing the catheter using the external jugular vein is difficult due to obstructions or kinking. METHODS: Between July 1997 and August 2000, 320 long-term chemotherapy catheters were placed, and in 220 cases the external jugular vein was used as the primary venous approach. In 18 of these patients, correct positioning was not achieved and several endovascular techniques were then utilized to overcome these obstacles, including manipulation of a J-wire with a moveable core, venography, and the exchange wire technique. RESULTS: In 94.5% of the patients with difficulties in obtaining the correct positioning, we were able to advance the long-term catheter to the desired position with the assistance of endovascular techniques. CONCLUSIONS: Venography and endovascular guidance techniques are useful for the placement of long-term catheters in the external jugular vein.

A proactive approach o XY international expansion

This work project was conducted under a Direct Research internship (DRI) that consists on an individual dissertation established on a given organization. DRI has a problem solving format to an empirical question to be addressed, «Which country has the highest potential for the next step of XY internationalization process? ». In order to achieve the project’s purpose, it was conducted a scanning process using a top-down approach over an initial list of nine countries given by XY. To do so it was developed an international scanning framework based on different domains and weights that allowed to achieve the top two countries with highest potential. After an in depth analysis over the final set, it was recommended Switzerland as the best country to make the next step of XY internationalization in Europe.

Chesney's: Growing through product expansion

Chesney’s: Growing Through Product Expansion The purpose of this work project is to have a better understanding about how to proceed when a company is challenged by new options to grow and thrive. It aims to decode the next direction of Chesney’s Ltd, a United Kingdom leading company in luxurious replicas of antique fireplaces, wood burning stoves and other architectural pieces. The work project relies on the concepts of strategy, innovation and design thinking in order to encourage dynamic activities within the company. Chesney’s continuously tries to improve and innovate and this work project will assess whether the possible options have strategic fit with the purpose of the company and consequently, create an introduction plan for the opportunity that shows higher probabilities of becoming successful.

The reasons behind the progression in PISA scores: An education production function approach using semi-parametric techniques

Research Masters

Toxicity measurement techniques for building materials with wastes

The innovative Horizon 2020 program sponsored by the European Union (EU) aims to promote and develop processes of waste integration in construction materials. However, several potential health hazards caused by building materials have been identified and, there-fore, there is an ongoing need to develop new recycling methods for hazardous wastes and effi-cient barriers in order to prevent toxic releases from the new construction solutions with wastes. This paper presents an overview that focus on two main aspects: the identification of the health risks related to radioactivity and heavy metals present in building materials and identification of these toxic substances in new construction solutions that contain recycled wastes. Different waste materials were selected and distinct methodologies of toxicity evaluation are presented to analyse the potential hazardous, the feasibility of using those wastes and the achievement of op-timal construction solutions involving wastes.

Ancient materials and techniques to improve the earthen building durability

A substantial part of the world building heritage has been performed by earthen building. The durability of this existing heritage and mainly of the new buildings built with earth is particularly conditioned by the erosion caused by water action, especially in countries with high levels of rainfall. This research aims to contribute to the increase of knowledge about the ancient building techniques that provide enhanced durability. It is possible to analyse the ancestral practices used to protect the earth material from the water action in order to understand how the old earthen buildings were preserved over the centuries, resisting to harsh weather conditions. Among these techniques are: the incorporation of biopolymers (such as oils or fats from animal or vegetable origin); the addition of some minerals; and the earth stabilization with lime. However, this knowledge seems to be forgotten, probably due to the prejudice related to earthen constructions, which several times are associated with a poor building. This research also focuses on the study of new methods of earth stabilization with lime and biopolymers, adapting the ancient knowledge to improve the durability related to the water action. Therefore, alternative solutions can be obtained to improve the performance of earthen buildings, mainly the resistance of the material in the presence of water, reducing its permeability to water. In addition, with the proposed solutions it is possible to obtain good levels of water vapour permeability, one of the major advantages of the construction with earth.

Foamed Bitumen: an alternative way of producing asphalt mixtures

With the constant need to improve and make the production of asphalt mixtures more sustainable, new production techniques have been developed, the implementation of which implies the correct knowledge of their performance. One of the most promising asphalt production techniques is the use of foamed bitumen. However, it is essential to understand how this binder will behave when subject to the expansion process. The loss of volume of the foamed bitumen could be translated by a decay curve, which allows to determine the ideal temperature and water content added to the bitumen in order to assure adequate conditions to the mix the bitumen with the aggregates. On the present study, a conventional 160/220 pen grade bitumen was tested by using different temperatures and water contents, and it was concluded that the optimum temperature for the production of foamed bitumen (with the studied bitumen) is 150 ºC, which corresponds to a viscosity of 0.1 Pa.s. The water content mostly influence the half-life of the bitumen foam, resulting in quicker volume reductions for higher water contents.