Diversité microbienne associée au cycle du méthane dans les mares de fonte du pergélisol subarctique

La fonte et l’effondrement du pergélisol riche en glace dans la région subarctique du Québec ont donné lieu à la formation de petits lacs (mares de thermokarst) qui émettent des gaz à effet de serre dans l’atmosphère tels que du dioxyde de carbone et du méthane. Pourtant, la composition de la communauté microbienne qui est à la base des processus biogéochimiques dans les mares de fonte a été très peu étudiée, particulièrement en ce qui concerne la diversité et l’activité des micro-organismes impliqués dans le cycle du méthane. L’objectif de cette thèse est donc d’étudier la diversité phylogénétique et fonctionnelle des micro-organismes dans les mares de fonte subarctiques en lien avec les caractéristiques de l’environnement et les émissions de méthane. Pour ce faire, une dizaine de mares ont été échantillonnées dans quatre vallées situées à travers un gradient de fonte du pergélisol, et disposant de différentes propriétés physico-chimiques. Selon les vallées, les mares peuvent être issues de la fonte de palses (buttes de tourbe, à dominance organique) ou de lithalses (buttes de sol à dominance minérale) ce qui influence la nature du carbone organique disponible pour la reminéralisation microbienne. Durant l’été, les mares étaient fortement stratifiées; il y avait un fort gradient physico-chimique au sein de la colonne d’eau, avec une couche d’eau supérieure oxique et une couche d’eau profonde pauvre en oxygène ou anoxique. Pour identifier les facteurs qui influencent les communautés microbiennes, des techniques de séquençage à haut débit ont été utilisées ciblant les transcrits des gènes de l’ARNr 16S et des gènes impliqués dans le cycle du méthane : mcrA pour la méthanogenèse et pmoA pour la méthanotrophie. Pour évaluer l’activité des micro-organismes, la concentration des transcrits des gènes fonctionnels a aussi été mesurée avec des PCR quantitatives (qPCR). Les résultats montrent une forte dominance de micro-organismes impliqués dans le cycle du méthane, c’est-à-dire des archées méthanogènes et des bactéries méthanotrophes. L’analyse du gène pmoA indique que les bactéries méthanotrophes n’étaient pas seulement actives à la surface, mais aussi dans le fond de la mare où les concentrations en oxygène étaient minimales; ce qui est inattendu compte tenu de leur besoin en oxygène pour consommer le méthane. En général, la composition des communautés microbiennes était principalement influencée par l’origine de la mare (palse ou lithalse), et moins par le gradient de dégradation du pergélisol. Des variables environnementales clefs comme le pH, le phosphore et le carbone organique dissous, contribuent à la distinction des communautés microbiennes entre les mares issues de palses ou de lithalses. Avec l’intensification des effets du réchauffement climatique, ces communautés microbiennes vont faire face à des changements de conditions qui risquent de modifier leur composition taxonomique, et leurs réponses aux changements seront probablement différentes selon le type de mares. De plus, dans le futur les conditions d’oxygénation au sein des mares seront soumises à des modifications majeures associées avec un changement dans la durée des périodes de fonte de glace et de stratification. Ce type de changement aura un impact sur l’équilibre entre la méthanogenèse et la méthanotrophie, et affectera ainsi les taux d’émissions de méthane. Cependant, les résultats obtenus dans cette thèse indiquent que les archées méthanogènes et les bactéries méthanotrophes peuvent développer des stratégies pour survivre et rester actives au-delà des limites de leurs conditions d’oxygène habituelles.

Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma

SILVA, J. S. P. Estudo das características físico-químicas e biológicas pela adesão de osteoblastos em superfícies de titânio modificadas pela nitretação em plasma. 2008. 119 f. Tese (Doutorado) - Faculdade de Medicina, Universidade de São Paulo. São Paulo, 2008.

Hydrothermal carbonization in the synthesis of sustainable porous carbon materials

Carbon materials are found versatile and applicable in wide range of applications. During the recent years research of carbon materials has focussed on the search of environmentally friendly, sustainable, renewable and low-cost starting material sources as well as simple cost-efficient synthesis techniques. As an alternative synthesis technique in the production of carbon materials hydrothermal carbonization (HTC) has shown a great potential. Depending on the application HTC can be performed as such or as a pretreatment technique. This technique allows synthesis of carbon materials i.e. hydrochars in closed vessel in the presence of water and self-generated pressure at relatively low temperatures (180-250 ˚C). As in many applications well developed porosity and heteroatom distribution are in a key role. Therefore in this study different techniques e.g. varying feedstock, templating and post-treatment in order to introduce these properties to the hydrochars structure were performed. Simple monosaccharides i.e. fructose or glucose and more complex compounds such as cellulose and sludge were performed as starting materials. Addition of secondary precursor e.g. thiophenecarboxaldehyde and ovalbumin was successfully exploited in order to alter heteroatom content. It was shown that well-developed porosity (SBET 550 m2/g) can be achieved via one-pot approach (i.e. exploitation of salt mixture) without conventionally used post-carbonization step. Nitrogen-enriched hydrochars indicated significant Pb(II) and Cr(VI) removal efficiency of 240 mg/g and 68 mg/g respectively. Sulphur addition into carbon network was not found to have enhancing effect on the adsorption of methylene blue or change acidity of the carbon material. However, these hydrochars were found to remove 99.9 % methylene blue and adsorption efficiency of these hydrochars remained over 90 % even after regeneration. In addition to water treatment application N-rich high temperature treated carbon materials were proven applicable as electrocatalyst and electrocatalyst support. Hydrothermal carbonization was shown to be workable technique for the production of carbon materials with variable physico-chemical properties and therefore hydrochars could be applied in several different applications e.g. as alternative low-cost adsorbent for pollutant removal from water.

Novel Anti-Campylobacter Compounds Identified Using High Throughput Screening of a Pre-selected Enriched Small Molecules Library

Campylobacter is a leading cause of foodborne bacterial gastroenteritis worldwide and infections can be fatal. The emergence of antibiotic-resistant Campylobacter spp. necessitates the development of new antimicrobials. We identified novel anti-Campylobacter small molecule inhibitors using a high throughput growth inhibition assay. To expedite screening, we made use of a “bioactive” library of 4,182 compounds that we have previously shown to be active against diverse microbes. Screening for growth inhibition of Campylobacter jejuni, identified 781 compounds that were either bactericidal or bacteriostatic at a concentration of 200 µM. Seventy nine of the bactericidal compounds were prioritized for secondary screening based on their physico-chemical properties. Based on the minimum inhibitory concentration against a diverse range of C. jejuni and a lack of effect on gut microbes, we selected 12 compounds. No resistance was observed to any of these 12 lead compounds when C. jejuni was cultured with lethal or sub-lethal concentrations suggesting that C. jejuni is less likely to develop resistance to these compounds. Top 12 compounds also possessed low cytotoxicity to human intestinal epithelial cells (Caco-2 cells) and no hemolytic activity against sheep red blood cells. Next, these 12 compounds were evaluated for ability to clear C. jejuni in vitro. A total of 10 compounds had an anti-C. jejuni effect in Caco-2 cells with some effective even at 25 µM concentrations. These novel 12 compounds belong to five established antimicrobial chemical classes; piperazines, aryl amines, piperidines, sulfonamide and pyridazinone. Exploitation of analogues of these chemical classes may provide Campylobacter specific drugs that can be applied in both human and animal medicine.

Titanium dioxide based nanomaterials for photocatalytic water treatment

Water treatment using photocatalysis has gained extensive attention in recent years. Photocatalysis is promising technology from green chemistry point of view. The most widely studied and used photocatalyst for decomposition of pollutants in water under ultraviolet irradiation is TiO2 because it is not toxic, relatively cheap and highly active in various reactions. Within this thesis unmodified and modified TiO2 materials (powders and thin films) were prepared. Physico-chemical properties of photocatalytic materials were characterized with UV-visible spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometry (XPS), inductively coupled plasma optical emission spectroscopy (ICP-OES), ellipsometry, time-of-flight secondary ion mass spectrometry (ToF-SIMS), Raman spectroscopy, goniometry, diffuse reflectance measurements, thermogravimetric analysis (TGA) and nitrogen adsorption/desorption. Photocatalytic activity of prepared samples in aqueous environment was tested using model compounds such as phenol, formic acid and metazachlor. Also purification of real pulp and paper wastewater effluent was studied. Concentration of chosen pollutants was measured with high pressure liquid chromatography (HPLC). Mineralization and oxidation of organic contaminants were monitored with total organic carbon (TOC) and chemical oxygen demand (COD) analysis. Titanium dioxide powders prepared via sol-gel method and doped with dysprosium and praseodymium were photocatalytically active for decomposition of metazachlor. The highest degradation rate of metazachlor was observed when Pr-TiO2 treated at 450ºC (8h) was used. The photocatalytic LED-based treatment of wastewater effluent from plywood mill using commercially available TiO2 was demonstrated to be promising post-treatment method (72% of COD and 60% of TOC was decreased after 60 min of irradiation). The TiO2 coatings prepared by atomic layer deposition technique on aluminium foam were photocatalytically active for degradation of formic and phenol, however suppression of activity was observed. Photocatalytic activity of TiO2/SiO2 films doped with gold bipyramid-like nanoparticles was about two times higher than reference, which was not the case when gold nanospheres were used.

A transcriptome approach towards understanding the development of ripening capacity in 'Bartlett' pears (Pyrus communis L.)

Background: The capacity of European pear fruit (Pyrus communis L.) to ripen after harvest develops during the final stages of growth on the tree. The objective of this study was to characterize changes in 'Bartlett' pear fruit physico-chemical properties and transcription profiles during fruit maturation leading to attainment of ripening capacity. Results: The softening response of pear fruit held for 14days at 20°C after harvest depended on their maturity. We identified four maturity stages: S1-failed to soften and S2- displayed partial softening (with or without ET-ethylene treatment); S3 - able to soften following ET; and S4 - able to soften without ET. Illumina sequencing and Trinity assembly generated 68,010 unigenes (mean length of 911bp), of which 32.8% were annotated to the RefSeq plant database. Higher numbers of differentially expressed transcripts were recorded in the S3-S4 and S1-S2 transitions (2805 and 2505 unigenes, respectively) than in the S2-S3 transition (2037 unigenes). High expression of genes putatively encoding pectin degradation enzymes in the S1-S2 transition suggests pectic oligomers may be involved as early signals triggering the transition to responsiveness to ethylene in pear fruit. Moreover, the co-expression of these genes with Exps (Expansins) suggests their collaboration in modifying cell wall polysaccharide networks that are required for fruit growth. K-means cluster analysis revealed that auxin signaling associated transcripts were enriched in cluster K6 that showed the highest gene expression at S3. AP2/EREBP (APETALA 2/ethylene response element binding protein) and bHLH (basic helix-loop-helix) transcripts were enriched in all three transition S1-S2, S2-S3, and S3-S4. Several members of Aux/IAA (Auxin/indole-3-acetic acid), ARF (Auxin response factors), and WRKY appeared to play an important role in orchestrating the S2-S3 transition. Conclusions: We identified maturity stages associated with the development of ripening capacity in 'Bartlett' pear, and described the transcription profile of fruit at these stages. Our findings suggest that auxin is essential in regulating the transition of pear fruit from being ethylene-unresponsive (S2) to ethylene-responsive (S3), resulting in fruit softening. The transcriptome will be helpful for future studies about specific developmental pathways regulating the transition to ripening. © 2015 Nham et al.

Estudo das propriedades físico-químicas e avaliação de compostos bioativos em 'Physalis peruviana L.'

O rápido crescimento da procura e na produção de Physalis está associado às suas características nutracêuticas e medicinais, por estarem associadas ao bemestar e à saúde. O reconhecimento e o conceito da qualidade dos frutos é cada vezmais importante, abrangendo a aparência do produto, o aroma, a textura e o valor nutricional. Com a realização deste trabalho pretendeu-se avaliar as propriedades físicoquímicas das bagas de physalis, bem como os conteúdos em compostos bioativos com potenciais benefícios para a saúde humana. Neste trabalho foi avaliada uma variedade de physalis (Physalis peruviana L.), sendo os frutos provenientes de uma exploração localizada na região Norte-Centro de Portugal. Foram realizadas análises físicas às 'physalis' frescas, tendo sido determinados o calibre, a cor e a textura. Na análise química, realizaram-se as determinações, da humidade, da fibra bruta, dos açúcares totais e redutores, da acidez total titulável, do teor de sólidos solúveis totais, do ácido ascórbico, dos carotenóides, dos compostos fenólicos totais, dos orto-difenóis e dos flavonóides. Foi ainda determinada a atividade antioxidante pelos métodos ABTS e DPPH e os extratos submetidos a condições simulantes do trato digestivo. As physalis em estudo apresentaram, em média um diâmetro de 1,69 cm e uma massa de 2,77 g. Relativamente à cor, as bagas apresentaram-se claras, (L*=65,72), e com uma tendência para a cor vermelha (a*=16,69), e uma forte intensidade amarela (b*=58,11). No que diz respeito à textura, a firmeza foi de 2,40 N e a elasticidade foi de 2,94 mm. Quanto à caracterização química foram encontrados os seguintes resultados: 83,02% de água, 4,61% de fibra, 8,79% de açúcares totais, 1,25% de acidez total, expressa em ácido cítrico. A amostra continha ainda 5,95 μg/g de carotenoides 26,7 mg de ácido ascórbico por 100 g. Os valores de fenóis totais (42,74 e 59,95 mg EAG/100 g) e de atividade antioxidante determinada pelo método DPPH (7,73 e 9,61 μmol TE/g), e pelo método ABTS (12,28 e 13,71 μmol TE/g) variam de acordo com as condições de extração. Verificou-se ainda uma correlação forte entre os dois métodos. No que diz respeito às condições in vitro de simulação das condições do trato digestivo, verificou-se um decréscimo ao longo do trato digestivo tanto no teor em compostos fenólicos bem como na atividade antioxidante. Em termos globais houve uma retenção de 43% dos compostos fenólicos totais e 26% da atividade antioxidante.

Effect of sugarcane cropping systems on herbicide losses in surface runoff

Herbicide runoff from cropping fields has been identified as a threat to the Great Barrier Reef ecosystem. A field investigation was carried out to monitor the changes in runoff water quality resulting from four different sugarcane cropping systems that included different herbicides and contrasting tillage and trash management practices. These include (i) Conventional - Tillage (beds and inter-rows) with residual herbicides used; (ii) Improved - only the beds were tilled (zonal) with reduced residual herbicides used; (iii) Aspirational - minimum tillage (one pass of a single tine ripper before planting) with trash mulch, no residual herbicides and a legume intercrop after cane establishment; and (iv) New Farming System (NFS) - minimum tillage as in Aspirational practice with a grain legume rotation and a combination of residual and knockdown herbicides. Results suggest soil and trash management had a larger effect on the herbicide losses in runoff than the physico-chemical properties of herbicides. Improved practices with 30% lower atrazine application rates than used in conventional systems produced reduced runoff volumes by 40% and atrazine loss by 62%. There were a 2-fold variation in atrazine and >10-fold variation in metribuzin loads in runoff water between reduced tillage systems differing in soil disturbance and surface residue cover from the previous rotation crops, despite the same herbicide application rates. The elevated risk of offsite losses from herbicides was illustrated by the high concentrations of diuron (14mugL-1) recorded in runoff that occurred >2.5months after herbicide application in a 1st ratoon crop. A cropping system employing less persistent non-selective herbicides and an inter-row soybean mulch resulted in no residual herbicide contamination in runoff water, but recorded 12.3% lower yield compared to Conventional practice. These findings reveal a trade-off between achieving good water quality with minimal herbicide contamination and maintaining farm profitability with good weed control.

Le Bisphénol A dans la prééclampsie

Résumé : La prééclampsie (PE) est un désordre de la grossesse caractérisée par une dysfonction endothéliale faisant en sorte que l’endothélium devient moins sensible aux signaux de vasodilatation. La réponse provoquée par la liaison de la sérotonine au sous-type de récepteur S[indice inférieur 2] entraîne la libération de molécules aux propriétés vasoconstrictrices, qui, par une boucle de rétroaction positive, entraîne la libération de davantage de sérotonine par les plaquettes. Cette boucle amplifie la réponse et contribue ainsi à l’hypertension présente chez les femmes ayant une PE. Précédemment, il a été démontré par notre laboratoire que le Bisphénol A (BPA) s’accumulait davantage dans le placenta des femmes avec PE en comparaison aux femmes normotensives. Cette accumulation pourrait découler d’une perturbation de sa métabolisation qui impliquerait notamment la β-glucuronidase (GUSB). Des études chez les animaux ont quant à elles démontré que le BPA pouvait inhiber l’activité de la monoamine oxydase (MAO) à forte dose. Nous avons étudié l’effet du BPA à faible concentration (10 ng/ml) sur la MAO-A des cellules placentaires et démontré que le BPA inhibait la MAO-A de façon significative sans affecter son expression protéique. Afin d’expliquer l’accumulation particulière du BPA chez les femmes PE, nous avons comparé l’activité spécifique et l’expression protéique de la β-glucuronidase (GUSB) placentaire en utilisant un devis cas-témoins. Une tendance non significative suggère que la GUSB pourrait partiellement contribuer à l’accumulation du BPA chez les femmes PE. Nous avons étudié la relation entre la concentration sérique maternelle de BPA et la concentration à laquelle le fœtus est exposé par régression linéaire et corrélation de Spearman. Un tel modèle ne pourrait être utilisé pour déterminer de façon quantitative l’exposition fœtale. En revanche, en vue de la forte corrélation entre ces deux variables, une haute concentration sérique maternelle de BPA devrait se refléter par une haute exposition fœtale. Cette corrélation implique aussi que le métabolisme placentaire ne joue pas un rôle significatif dans la protection du fœtus. Le BPA pourrait ainsi contribuer à l’hypertension chez les femmes PE présentant une dysfonction endothéliale en inhibant la MAO-A et ainsi, favorisant la hausse de sérotonine circulante. Cette étude suggère les bases d’un mécanisme par lequel le BPA s’accumulerait davantage chez les femmes PE et affecterait ainsi la MAO-A placentaire et potentiellement, la MAO-A fœtale vu ses propriétés physico-chimiques.

Caracterização físico-química de complexo de inclusão entre hidroximetilnitrofurazona e hidroxipropil-beta-ciclodextrina

Hydroxymethylnitrofurazone (NFOH) is a prodrug that is active against Trypanosoma cruzi. It however presents low solubility and high toxicity. Hydroxypropyl-beta-cyclodextrin (HP-beta-CD) can be used as a drug-delivery system for NFOH modifying its physico-chemical properties. The aim of this work is to characterize the inclusion complex between NFOH and HP-beta-CD. The rate of NFOH release decreases after complexation and thermodynamic parameters from the solubility isotherm studies revealed that a stable complex is formed (deltaGº= 1.7 kJ/mol). This study focuses on the physico-chemical characterization of a drug-delivery formulation that comes out as a potentially new therapeutic option for Chagas disease treatment.

Aqueous solubilities of five N-(diethylaminothiocarbonyl)benzimido derivatives at T = 298.15 K

N-(diethylaminothiocarbonyl)benzimido derivatives are polar multifunctional substances. A set of these compounds was synthesised by successive substitution on the enamine side, resulting in similar substances with different polarities, providing a set of model compounds with respect to the study of substituent effects on physico-chemical properties. Experimental aqueous solubility data, at T = 298.15 K, of N-(diethylaminothiocarbonyl)benzamidine, PhCNH2NCSNEt2 (1),N-(diethylaminothiocarbonyl)-N'-phenylbenzamidine, PhCNHPhNCSNEt2 (2), N-(diethylaminothiocarbonyl)-N'-monoethylbenzamidine, PhCNHEtNCSNEt2 (3), N-(diethylaminothiocarbonyl)-N',N'-diethylbenzamidine, PhCNEt2NCSNEt2 (4), and N-(diethylaminothiocarbonyl)benzimido ethylester, PhCOEtNCSNEt2 (5) were measured at T = 298.15 K. The obtained data are supplemented by COSMO-RS aqueous solubility predictions as well as other environmentally important partition coefficients. This information is shown in a two-dimensional chemical space diagram, providing indications about the compartment into which the bulk of the compounds is likely to concentrate. The expected quality of COSMO-RS predictions for this type of screening exercise is illustrated on a set of pesticides with established thermophysical property data.

Mineralisation of the fungicide 14C-labelled metalaxyl fungicide in Brazilian soils.

Laboratory incubation experiments were carried out to estimate the mineralisation of metalaxyl 14C {N-(2-6 dimethyphenyl)-N-(methoxyacetyl) alanine methyl ester} in four Brazilian soils with different physico-chemical properties, at 3 and 30 ?g a.i. g-1. In the Petrolina sandy soil the mineralisation presented higher 14CO2 production rates, at two essayed concentrations, after 70 days. Microbiological studies were done to determine the numbers of bacteria, actinobacteria and fungi (CFU g-1 soil). In relation with other microbial community, bacterial population demonstrated to be a major component of the cultivable heterotrophic community after the application.of the compound. No detectable metabolites were found in this study. The results suggest that soil properties and application history may have a strong influence on the fungicide behavior in these soil samples.

A multi-methodological approach for the study of polymorphism in organic pigments and pharmaceuticals

The study of polymorphism has an important role in several fields of materials science, because structural differences lead to different physico-chemical properties of the system. This PhD work was dedicated to the investigation of polymorphism in Indigo, Thioindigo and Quinacridone, as case studies among the organic pigments employed as semiconductors, and in Paracetamol, Phenytoin and Nabumetone, chosen among some commonly used API. The aim of the research was to improve the understanding on the structures of bulk crystals and thin films, adopting Raman spectroscopy as the method of choice, while resorting to other experimental techniques to complement the gathered information. Different crystalline polymorphs, in fact, may be conveniently distinguished by their Raman spectra in the region of the lattice phonons (10-150 cm-1), the frequencies of which, probing the inter-molecular interactions, are very sensitive to even slight modifications in the molecular packing. In particular, we have used Confocal Raman Microscopy, which is a powerful, yet simple, technique for the investigation of crystal polymorphism in organic and inorganic materials, being capable of monitoring physical modifications, chemical transformations and phase inhomogeneities in crystal domains at the micrometre scale. In this way, we have investigated bulk crystals and thin film samples obtained with a variety of crystal growth and deposition techniques. Pure polymorphs and samples with phase mixing were found and fully characterized. Raman spectroscopy was complemented mainly by XRD measurements for bulk crystals and by AFM, GIXD and TEM for thin films. Structures and phonons of the investigated polymorphs were computed by DFT methods, and the comparison between theoretical and experimental results was used to assess the relative stability of the polymorphs and to assist the spectroscopic investigation. The Raman measurements were thus found to be able to clarify ambiguities in the phase assignments which otherwise the other methods were unable to solve.

Methylmercury and polycyclic aromatic hydrocarbons in Mediterranean seafood: a molecular anthropological perspective

Seafood carries several contaminants, among which mercury and polycyclic aromatic hydrocarbons are those that cause major concern. Evidence exists that human populations are exposed to these environmental chemicals since ancient times, which may have driven the positive selection of specific genetic polymorphisms related to chemicals toxicokinetic. Both mercury and polycyclic aromatic hydrocarbons are able to cause DNA methylation changes in humans. Some Mediterranean populations may be particularly exposed to these contaminants, being the Mediterranean Sea at a high-risk for contamination by toxic compounds, and because of their traditionally high consumption of locally caught seafood. Starting from these premises the present thesis aims to contribute to the understanding of the molecular impact of seafood consumption on the biology of the Mediterranean population. To this end the work has been divided into four main parts: (1) the development and meta-analysis of a georeferenced database on polycyclic aromatic hydrocarbons in Mediterranean seafood aimed at identifying geographical patterns of contamination and trends that could be related to the biology of the marine organisms, to the physico-chemical properties of each hydrocarbon and to the oceanographic characteristic of the Mediterranean; (2) the development and validation of a food frequency questionnaire to estimate the intake of mercury through seafood consumption among a population living in a geographic area that is usually considered a contamination hotspot; (3) the creation of a biobank made of biological samples from members of several Italian communities together with information on their dietary habits, lifestyle and general health; (4) a review of the literature on the genetic component of individual susceptibility to methylmercury and polycyclic aromatic hydrocarbons exposure in humans, to the effects that these pollutants have on human DNA methylation, and to the evidence that Mediterranean coastal communities represent an informative case study to investigate the potential molecular impact of these chemicals.

Properties Of Bologna-type Sausages With Pork Back-fat Replaced With Pork Skin And Amorphous Cellulose.

Bologna-type sausages were produced with 50% of their pork back-fat content replaced with gels elaborated with different ratios of pork skin, water, and amorphous cellulose (1:1:0, 1:1:0.1, 1:1:0.2, 1:1:0.3, and 1:1:0.4). The impact of such replacement on the physico-chemical characteristics and the consumer sensory profiling was evaluated. The modified treatments had 42% less fat, 18% more protein, and 8% more moisture than the control group. Treatments with amorphous cellulose had a lower cooking loss and higher emulsion stability. High amorphous cellulose content (1:1:0.3 and 1:1:0.4) increased hardness, gumminess, and chewiness. The gel formulated with the ratio of 1:1:0.2 (pork skin: water: amorphous cellulose gel) provided a sensory sensation similar to that provided by fat and allowed products of good acceptance to be obtained. Therefore, a combination of pork skin and amorphous cellulose is useful in improving technological quality and producing healthier and sensory acceptable bologna-type sausages.