An empirical hierarchical Bayesian unification of occupational exposure assessment methods.

In occupational exposure assessment of airborne contaminants, exposure levels can either be estimated through repeated measurements of the pollutant concentration in air, expert judgment or through exposure models that use information on the conditions of exposure as input. In this report, we propose an empirical hierarchical Bayesian model to unify these approaches. Prior to any measurement, the hygienist conducts an assessment to generate prior distributions of exposure determinants. Monte-Carlo samples from these distributions feed two level-2 models: a physical, two-compartment model, and a non-parametric, neural network model trained with existing exposure data. The outputs of these two models are weighted according to the expert's assessment of their relevance to yield predictive distributions of the long-term geometric mean and geometric standard deviation of the worker's exposure profile (level-1 model). Bayesian inferences are then drawn iteratively from subsequent measurements of worker exposure. Any traditional decision strategy based on a comparison with occupational exposure limits (e.g. mean exposure, exceedance strategies) can then be applied. Data on 82 workers exposed to 18 contaminants in 14 companies were used to validate the model with cross-validation techniques. A user-friendly program running the model is available upon request.

Blood transfusion and iatrogenic risks in Mexico city: anti-Trypanosoma cruzi seroprevalence in 43,048 blood donors, evaluation of parasitemia, and electrocardiogram findings in seropositive

Iatrogenous transmission of Trypanosoma cruziby blood transfusion was suggested as a potential risk by Pellegrino (1949). Seropositive blood donors in Mexico were first reported in 1978, however, limited information is available due to small sampling, the use of heterogeneous serologic assays, and geographically limited studies. A wide survey carried out in 18 out of the 32 states of Mexico, showed a national mean of 1.6% seropositive among 64,969 donors, ranging from 0.2 to 2.8%. In the present study, we have screened 43,048 voluntary blood donors in a period of five years at the Instituto Nacional de Cardiología I. Chávez, a concentration hospital located in Mexico city which serves mainly the metropolitan area and accepts from all over the country. Standardized ELISA and IIF were used to identify seropositive individuals in addition to hemoculture, PCR and standard 12 lead ECG tests that were applied to a group of seropositive patients (29/161). The result showed a seropositivity of 0.37% (161/43,048). From the group of seropositive individuals 40% (12/29) were potential carriers of T. cruzi at the donation time and 5/29 had subclinical ECG abnormalities. Parasitological tests performed in 70 erythrocyte and platelet fractions from seropositive units (70/161) showed negative results. Our findings strongly support T. cruzi screening in the transfusion medicine practice and identify subclinical heart disease among seropositive blood donors.

Health Risks and Health Inequalities in Housing: an Assessment Tool

This tool is designed to assess the health risks of housing and the residential environment at the scale of a neighbourhood, housing stock or administrative area. For each health risk, the tool enables a judgement to be recorded about the level of health risk attributable to unhealthy or unsafe housing conditions, and for this to be compared with the adequacy of local practice in mitigating the risk.

NanoImpactNet - building a multi-stakeholder dialogue on the health and environmental impact of nanomaterials

NanoImpactNet (NIN) is a multidisciplinary European Commission funded network on the environmental, health and safety (EHS) impact of nanomaterials. The 24 founding scientific institutes are leading European research groups active in the fields of nanosafety, nanorisk assessment and nanotoxicology. This 4-year project is the new focal point for information exchange within the research community. Contact with other stakeholders is vital and their needs are being surveyed. NIN is communicating with 100s of stakeholders: businesses; internet platforms; industry associations; regulators; policy makers; national ministries; international agencies; standard-setting bodies and NGOs concerned by labour rights, EHS or animal welfare. To improve this communication, internet research, a questionnaire distributed via partners and targeted phone calls were used to identify stakeholders' interests and needs. Knowledge gaps and the necessity for further data mentioned by representatives of all stakeholder groups in the targeted phone calls concerned: • the potential toxic and safety hazards of nanomaterials throughout their lifecycles; • the fate and persistence of nanoparticles in humans, animals and the environment; • the associated risks of nanoparticle exposure; • greater participation in: the preparation of nomenclature, standards, methodologies, protocols and benchmarks; • the development of best practice guidelines; • voluntary schemes on responsibility; • databases of materials, research topics and themes, but also of expertise. These findings suggested that stakeholders and NIN researchers share very similar knowledge needs, and that open communication and free movement of knowledge will benefit both researchers and industry. Subsequently a workshop was organised by NIN focused on building a sustainable multi-stakeholder dialogue. Specific questions were asked to different stakeholder groups to encourage discussions and open communication. 1. What information do stakeholders need from researchers and why? The discussions about this question confirmed the needs identified in the targeted phone calls. 2. How to communicate information? While it was agreed that reporting should be enhanced, commercial confidentiality and economic competition were identified as major obstacles. It was recognised that expertise was needed in the areas of commercial law and economics for a wellinformed treatment of this communication issue. 3. Can engineered nanomaterials be used safely? The idea that nanomaterials are probably safe because some of them have been produced 'for a long time', was questioned, since many materials in common use have been proved to be unsafe. The question of safety is also about whether the public has confidence. New legislation like REACH could help with this issue. Hazards do not materialise if exposure can be avoided or at least significantly reduced. Thus, there is a need for information on what can be regarded as acceptable levels of exposure. Finally, it was noted that there is no such thing as a perfectly safe material but only boundaries. At this moment we do not know where these boundaries lie. The matter of labelling of products containing nanomaterials was raised, as in the public mind safety and labelling are connected. This may need to be addressed since the issue of nanomaterials in food, drink and food packaging may be the first safety issue to attract public and media attention, and this may have an impact on 'nanotechnology as a whole. 4. Do we need more or other regulation? Any decision making process should accommodate the changing level of uncertainty. To address the uncertainties, adaptations of frameworks such as REACH may be indicated for nanomaterials. Regulation is often needed even if voluntary measures are welcome because it mitigates the effects of competition between industries. Data cannot be collected on voluntary bases for example. NIN will continue with an active stakeholder dialogue to further build on interdisciplinary relationships towards a healthy future with nanotechnology.

Factsheet: the health risks of second-hand smoke

This factsheet summarises why one person's smoking can be harmful to others, by highlighting the health risks of second-hand smoke to adults and children.�

Sociodemographic and occupational risk factors associated with the development of different burnout types: the cross-sectional University of Zaragoza study

BACKGROUND: Three different burnout types have been described: The "frenetic" type describes involved and ambitious subjects who sacrifice their health and personal lives for their jobs; the "underchallenged" type describes indifferent and bored workers who fail to find personal development in their jobs, and the "worn-out" in type describes neglectful subjects who feel they have little control over results and whose efforts go unacknowledged. The study aimed to describe the possible associations between burnout types and general sociodemographic and occupational characteristics. METHODS: A cross-sectional study was carried out on a multi-occupational sample of randomly selected university employees (n = 409). The presence of burnout types was assessed by means of the "Burnout Clinical Subtype Questionnaire (BCSQ-36)", and the degree of association between variables was assessed using an adjusted odds ratio (OR) obtained from multivariate logistic regression models. RESULTS: Individuals working more than 40 hours per week presented with the greatest risk for "frenetic" burnout compared to those working fewer than 35 hours (adjusted OR = 5.69; 95% CI = 2.52-12.82; p < 0.001). Administration and service personnel presented the greatest risk of "underchallenged" burnout compared to teaching and research staff (adjusted OR = 2.85; 95% CI = 1.16-7.01; p = 0.023). Employees with more than sixteen years of service in the organisation presented the greatest risk of "worn-out" burnout compared to those with less than four years of service (adjusted OR = 4.56; 95% CI = 1.47-14.16; p = 0.009). CONCLUSIONS: This study is the first to our knowledge that suggests the existence of associations between the different burnout subtypes (classified according to the degree of dedication to work) and the different sociodemographic and occupational characteristics that are congruent with the definition of each of the subtypes. These results are consistent with the clinical profile definitions of burnout syndrome. In addition, they assist the recognition of distinct profiles and reinforce the idea of differential characterisation of the syndrome for more effective treatment.

Parental occupational exposure to organic solvents and anencephaly in Mexico

Objective: To assess the relationship between parental occupational exposure to organic solvents, and the risk of anencephaly in Mexico. Methods: A case-control study was conducted based on the registers of the Epidemiological Surveillance System for Neural Tube Defects in Mexico; 151 cases of anencephaly of ≥20 weeks’ gestation were included. A control, born alive and without any apparent congenital malformations at birth, was selected for each case in the same maternity service in which the case was born. Information on occupational exposures, lifestyle habits, reproductive history, use of medicines, supplementation with multivitamins and folic acid, was obtained by a general questionnaire; a food frequency questionnaire was also applied to obtain information of daily intake of folate and other B vitamins. Occupational exposure to organic solvents was based on job title as a proxy for exposure and analysed considering two critical periods around conception. Results: In logistic regression analysis, the odds of having a child with anencephaly was higher if the mother or the father was occupationally exposed to organic solvents during the periconceptional period, or when both parents or at least one of them were occupationally exposed during this period with an adjusted odds ratio of 2.97 (95% CI 1.36 to 6.52). Conclusions: The results support the hypothesis that both maternal and paternal occupational exposure to organic solvents can increase the probability of having a child with anencephaly.

Identifying pesticide use patterns among flower growers to assess occupational exposure to mixtures

Objectives Exposure assessment to a single pesticide does not capture the complexity of the occupational exposure. Recently, pesticide use patterns analysis has emerged as an alternative to study these exposures. The aim of this study is to identify the pesticide use pattern among flower growers in Mexico participating in the study on the endocrine and reproductive effects associated with pesticide exposure. Methods A cross-sectional study was carried out to gather retrospective information on pesticide use applying a questionnaire to the person in charge of the participating flower growing farms. Information about seasonal frequency of pesticide use (rainy and dry) for the years 2004 and 2005 was obtained. Principal components analysis was performed. Results Complete information was obtained for 88 farms and 23 pesticides were included in the analysis. Six principal components were selected, which explained more than 70% of the data variability. The identified pesticide use patterns during both years were: 1. fungicides benomyl, carbendazim, thiophanate and metalaxyl (both seasons), including triadimephon during the rainy season, chlorotalonyl and insecticide permethrin during the dry season; 2. insecticides oxamyl, biphenthrin and fungicide iprodione (both seasons), including insecticide methomyl during the dry season; 3. fungicide mancozeb and herbicide glyphosate (only during the rainy season); 4. insecticides metamidophos and parathion (both seasons); 5. insecticides omethoate and methomyl (only rainy season); and 6. insecticides abamectin and carbofuran (only dry season). Some pesticides do not show a clear pattern of seasonal use during the studied years. Conclusions The principal component analysis is useful to summarise a large set of exposure variables into smaller groups of exposure patterns, identifying the mixtures of pesticides in the occupational environment that may have an interactive effect on a particular health effect.

Nanoparticle usage and protection measures in the manufacturing industry : a representative survey

Addressing the risks of nanoparticles requires knowledge about release into the environment and occupational exposure. However, such information currently is not systematically collected; therefore, this risk assessment lacks quantitative data. The goal was to evaluate the current level of nanoparticle usage in Swiss industry as well as health, safety, and environmental measures, and the number of potentially exposed workers. A representative, stratified mail survey was conducted among 1626 clients of the Swiss National Accident Insurance Fund (SUVA), which insures 80,000 manufacturing firms, representing 84% of all Swiss manufacturing companies (947 companies answered the survey for a 58.3% response rate). The extrapolation to all Swiss manufacturing companies results in 1309 workers (95% confidence interval [CI]: 1073 to 1545) potentially exposed to nanoparticles in 586 companies (95% CI: 145 to 1027). This corresponds to 0.08% of workers (95% CI: 0.06% to 0.09%) and to 0.6% of companies (95% CI: 0.2% to 1.1%). The industrial chemistry sector showed the highest percentage of companies using nanoparticles (21.2%). Other important sectors also reported nanoparticles. Personal protection equipment was the predominant protection strategy. Only a few applied specific environmental protection measures. This is the first nationwide representative study on nanoparticle use in the manufacturing sector. The information gained can be used for quantitative risk assessment. It can also help policymakers design strategies to support companies developing a safer use of nanomaterial. Notingthe current low use of nanoparticles, there is still time to proactively introduce protective methods. If the predicted "nano-revolution" comes true, now is the time to take action. [Supplementary materials are available for this article. Go to the publisher's online edition of Journal of occupational and Environmental Hygiene for the following free supplemental resource: a pdf file containing a detailed description of the approach to statistical analyses, English translation of the questionnaire, additional information for Figure 1, and additional information for the SUVA-code.] [Authors]