Thermal modelling of semiconductor switches in three-level Neutral Point Clamped Medium Voltage DTC-inverter

The aim of this thesis is to investigate the thermal loading of medium voltage three-level NPC inverter’s semiconductor IGCT switches in different operation points. The objective is to reach both a fairly accurate off-line simulation program and also so simple a simulation model that its implementation into an embedded system could be reasonable in practice and a real time use should become feasible. Active loading limitation of the inverter can be realized with a thermal model which is practical in a real time use. Determining of the component heating has been divided into two parts; defining of component losses and establishing the structure of a thermal network. Basics of both parts are clarified. The simulation environment is Matlab-Simulink. Two different models are constructed – a more accurate one and a simplified one. Potential simplifications are clarified with the help of the first one. Simplifications are included in the latter model and the functionalities of both models are compared. When increasing the calculation time step a decreased number of considered components and time constants of the thermal network can be used in the simplified model. Heating of a switching component is dependent on its topological position and inverter’s operation point. The output frequency of the converter defines mainly which one of the switching components is – because of its losses and heating – the performance limiting component of the converter. Comparison of results given by different thermal models demonstrates that with larger time steps, describing of fast occurring switching losses becomes difficult. Generally articles and papers dealing with this subject are written for two-level inverters. Also inverters which apply direct torque control (DTC) are investigated rarely from the heating point of view. Hence, this thesis completes the former material.

Mäntsälän Sähkö Oy:n jakeluverkon kehittämissuunnitelma

Työn tavoitteena oli laatia Mäntsälän Sähkö Oy:n jakeluverkon kehittämissuunnitelma vuodelle 2020. Työn laadinta aloitettiin selvittämällä verkon nykytila ja käyttövarmuus korvaustilanteissa. Tämän jälkeen työssä paikannettiin alueet, joissa korvattavuuden parantaminen tai kuormituksien kasvaminen tulevaisuudessa edellyttää mittavia investointeja jakeluverkon käyttövarmuuden takaamiseksi. Työssä tarkastellaan yksityiskohtaisemmin Järvelän alueen käyttövarmuuden kehittämistä ja Hennan alueen kuormituksen kasvuun varautumista. Järvelän alueen käyttövarmuuden parantaminen edellyttää joko uutta sähköasemainvestointia tai 110 kV johdon rakentamista. Hennan alueen kuormituksen kasvu edellyttää, alueen kuormituksista riippuen, joko yhtä tai kahta uutta sähköasemainvestointia.

Multilevel converter modulation: implementation and analysis

Multilevel converters provide an attractive solution to bring the benefits of speed-controlled rotational movement to high-power applications. Therefore, multilevel inverters have attracted wide interest in both the academic community and in the industry for the past two decades. In this doctoral thesis, modulation methods suitable especially for series connected H-bridge multilevel inverters are discussed. A concept of duty cycle modulation is presented and its modification is proposed. These methods are compared with other well-known modulation schemes, such as space-vector pulse width modulation and carrier-based modulation schemes. The advantage of the modified duty-cycle modulation is its algorithmic simplicity. A similar mathematical formulation for the original duty cycle modulation is proposed. The modified duty cycle modulation is shown to produce well-formed phase-to-neutral voltages that have lower total harmonic distortion than the space-vector pulse width modulation and the duty cycle modulation. The space-vector-based solution and the duty cycle modulation, on the other hand, result in a better-quality line-to-line voltage and current waveform. The voltage of the DC links in the modules of the series-connected H-bridge inverter are shown to fluctuate while they are under load. The fluctuation causes inaccuracies in the voltage production, which may result in a failure of the flux estimator in the controller. An extension for upper-level modulation schemes, which changes the switching instants of the inverter so that the output voltage meets the reference voltage accurately regardless of the DC link voltages, is proposed. The method is shown to reduce the error to a very low level when a sufficient switching frequency is used. An appropriate way to organize the switching instants of the multilevel inverter is to make only one-level steps at a time. This causes restrictions on the dynamical features of the modulation schemes. The produced voltage vector cannot be rotated several tens of degrees in a single switching period without violating the above-mentioned one-level-step rule. The dynamical capabilities of multilevel inverters are analyzed in this doctoral thesis, and it is shown that the multilevel inverters are capable of operating even in dynamically demanding metal industry applications. In addition to the discussion on modulation schemes, an overvoltage in multilevel converter drives caused by cable reflection is addressed. The voltage reflection phenomenon in drives with long feeder cables causes premature insulation deterioration and also affects the commonmode voltage, which is one of the main reasons for bearing currents. Bearing currents, on the other hand, cause fluting in the bearings, which results in premature bearing failure. The reflection phenomenon is traditionally prevented by filtering, but in this thesis, a modulationbased filterless method to mitigate the overvoltage in multilevel drives is proposed. Moreover, the mitigation method can be implemented as an extension for upper-level modulation schemes. The method exploits the oscillations caused by two consecutive voltage edges so that the sum of the oscillations results in a mitigated peak of the overvoltage. The applicability of the method is verified by simulations together with experiments with a full-scale prototype.

Optimization of the power cable for low voltage direct current system

The demand for electricity is constantly growing in contemporary world and, in the same time, quality and reliability requirements are becoming more rigid. In addition, renewable sources of energy have been widely introduced for power generation, and they create specific challenges for the network. Consequently, new solution for distribution system is required, and Low Voltage Direct Current (LVDC) system is the proposed one. This thesis focuses on the investigation of specific cable features for low voltage direct current (LVDC) distribution system. The LVDC system is public ±750 VDC distribution system, which is currently being developed at Lappeen-ranta University of Technology. The aspects, considered in the thesis, are reliable and economic power transmission in distribution networks and possible power line communication in the LVDC cable.

Elintarviketehtaan sähköverkon selvitys ja kehittämissuunnitelma

Työssä selvitetään elintarviketehtaan sähköverkon kunto sen suurimpien sähkönsyöttöjen osalta ja lasketaan oikosulkuvirtojen suuruus, kaapeleiden kuormitettavuus ja jännitteenalenemat verkon eri osissa. Laskentatulosten analysoinnin jälkeen esitetään korjaavat toimenpiteet löydettyjen epäkohtien osalta. Lisäksi tarkastellaan tehtaan energiankulutusta ja suunniteltujen energiansäästöehdotuksien vaikutuksia sähköverkon toimintaan. Työssä arvioidaan myös verkon eri osienvikaantumisen vaikutusta tehtaan tuotantoon ja esitetään parannuskeinoja verkon luotettavuuden parantamiseksi. Lopuksi on esitelty suunnitelma sähköverkon laajentamiselle ja käyty läpi tulevien investointien sähköteknistä mitoitusta ja vaikutusta verkon tulevaan tilaan.

Phase voltage control and filtering in a converter-fed single-phase customer-end system of the LVDC distribution network

In recent years, the network vulnerability to natural hazards has been noticed. Moreover, operating on the limits of the network transmission capabilities have resulted in major outages during the past decade. One of the reasons for operating on these limits is that the network has become outdated. Therefore, new technical solutions are studied that could provide more reliable and more energy efficient power distributionand also a better profitability for the network owner. It is the development and price of power electronics that have made the DC distribution an attractive alternative again. In this doctoral thesis, one type of a low-voltage DC distribution system is investigated. Morespecifically, it is studied which current technological solutions, used at the customer-end, could provide better power quality for the customer when compared with the current system. To study the effect of a DC network on the customer-end power quality, a bipolar DC network model is derived. The model can also be used to identify the supply parameters when the V/kW ratio is approximately known. Although the model provides knowledge of the average behavior, it is shown that the instantaneous DC voltage ripple should be limited. The guidelines to choose an appropriate capacitance value for the capacitor located at the input DC terminals of the customer-end are given. Also the structure of the customer-end is considered. A comparison between the most common solutions is made based on their cost, energy efficiency, and reliability. In the comparison, special attention is paid to the passive filtering solutions since the filter is considered a crucial element when the lifetime expenses are determined. It is found out that the filter topology most commonly used today, namely the LC filter, does not provide economical advantage over the hybrid filter structure. Finally, some of the typical control system solutions are introduced and their shortcomings are presented. As a solution to the customer-end voltage regulation problem, an observer-based control scheme is proposed. It is shown how different control system structures affect the performance. The performance meeting the requirements is achieved by using only one output measurement, when operating in a rigid network. Similar performance can be achieved in a weak grid by DC voltage measurement. An additional improvement can be achieved when an adaptive gain scheduling-based control is introduced. As a conclusion, the final power quality is determined by a sum of various factors, and the thesis provides the guidelines for designing the system that improves the power quality experienced by the customer.

Sähköautojen pikalatauksen verkkovaikutukset

Euroopan unionin energiapolitiikka on luonut paineen parantaa energiatehokkuutta kaikilla energiankäytön aloilla. Merkittävä osa energiasta kulutetaan liikenteessä, joten sähköautojen käyttöönotolla voidaan parantaa energiatehokkuutta merkittävästi. Tämän vuoksi on tarkasteltava sähköautojen laajamittaisen levinneisyyden aiheuttamia vaikutuksia sähköverkolle. Tässä diplomityössä tarkastellaan sähköautojen pikalatauksen verkkovaikutuksia. Tarkastelu painottuu kotilatauksen tarkasteluun taajamissa ja maaseudulla. Kuormituksen kasvu simuloidaan hyödyntäen sähköauton lataukselle laskettua kuormituskäyrää, jonka laskenta perustuu keskimääräiseen henkilöauton liikkumiseen, joka on saatavilla Suomen henkilöliikennetutkimuksesta. Simuloinnin tulosten perusteella sähköauton pikalatauksen verkkovaikutukset ovat merkittäviä keskijänniteverkossa ja pienjänniteverkossa. Suuremmat vaikutukset kohdistuvat pienjänniteverkkoon.

Analysis and Control of Excitation, Field Weakening and Stability in Direct Torque Controlled Electrically Excited Synchronous Motor Drives

Direct torque control (DTC) is a new control method for rotating field electrical machines. DTC controls directly the motor stator flux linkage with the stator voltage, and no stator current controllers are used. With the DTC method very good torque dynamics can be achieved. Until now, DTC has been applied to asynchronous motor drives. The purpose of this work is to analyse the applicability of DTC to electrically excited synchronous motor drives. Compared with asynchronous motor drives, electrically excited synchronous motor drives require an additional control for the rotor field current. The field current control is called excitation control in this study. The dependence of the static and dynamic performance of DTC synchronous motor drives on the excitation control has been analysed and a straightforward excitation control method has been developed and tested. In the field weakening range the stator flux linkage modulus must be reduced in order to keep the electro motive force of the synchronous motor smaller than the stator voltage and in order to maintain a sufficient voltage reserve. The dynamic performance of the DTC synchronous motor drive depends on the stator flux linkage modulus. Another important factor for the dynamic performance in the field weakening range is the excitation control. The field weakening analysis considers both dependencies. A modified excitation control method, which maximises the dynamic performance in the field weakening range, has been developed. In synchronous motor drives the load angle must be kept in a stabile working area in order to avoid loss of synchronism. The traditional vector control methods allow to adjust the load angle of the synchronous motor directly by the stator current control. In the DTC synchronous motor drive the load angle is not a directly controllable variable, but it is formed freely according to the motor’s electromagnetic state and load. The load angle can be limited indirectly by limiting the torque reference. This method is however parameter sensitive and requires a safety margin between the theoretical torque maximum and the actual torque limit. The DTC modulation principle allows however a direct load angle adjustment without any current control. In this work a direct load angle control method has been developed. The method keeps the drive stabile and allows the maximal utilisation of the drive without a safety margin in the torque limitation.

Switching components for medium voltage drives

Nowadays power drives are the essential part almost of all technological processes. Improvement of efficiency and reduction of losses require development of semiconductor switches. It has a particular meaning for the constantly growing market of renewable sources, especially for wind turbines, which demand more powerful semiconductor devices for control with growth of power. Also at present semiconductor switches are the key component in energy transmission, optimization of generation and network connection. The aim of this thesis is to make a survey of contemporary semiconductor components, showing difference in structures, advantages, disadvantages and most suitable applications. There is topical information about voltage, frequency and current limits of different switches. Study tries to compare dimensions and price of different components. Main manufacturers of semiconductor components are presented with the review of devices produced by them, and a conclusion about their availability was made. IGBT is selected as a main component in this study, because nowadays it is the most attractive component for usage in power drives, especially at the low levels of medium voltage. History of development of IGBT structure, static and dynamic characteristics are considered. Thesis tells about assemblies and connection of components and problems which can appear. One of key questions about semiconductor materials and their future development was considered. For the purpose of comparison strong and weak sides of different switches, calculation of losses of IGBT and its basic competitor – IGCT is presented. This master’s thesis makes an effort to answer the question if there are at present possibilities of accurate selection of switches for electrical drives of different rates of power and looks at future possible ways of development of semiconductor market.

Design Aspects of Megawatt-Range Direct-Driven Permanent MagnetWind Generators

Direct-driven permanent magnet synchronous generator is one of the most promising topologies for megawatt-range wind power applications. The rotational speed of the direct-driven generator is very low compared with the traditional electrical machines. The low rotational speed requires high torque to produce megawatt-range power. The special features of the direct-driven generators caused by the low speed and high torque are discussed in this doctoral thesis. Low speed and high torque set high demands on the torque quality. The cogging torque and the load torque ripple must be as low as possible to prevent mechanical failures. In this doctoral thesis, various methods to improve the torque quality are compared with each other. The rotor surface shaping, magnet skew, magnet shaping, and the asymmetrical placement of magnets and stator slots are studied not only by means of torque quality, but also the effects on the electromagnetic performance and manufacturability of the machine are discussed. The heat transfer of the direct-driven generator must be designed to handle the copper losses of the stator winding carrying high current density and to keep the temperature of the magnets low enough. The cooling system of the direct-driven generator applying the doubly radial air cooling with numerous radial cooling ducts was modeled with a lumped-parameter-based thermal network. The performance of the cooling system was discussed during the steady and transient states. The effect of the number and width of radial cooling ducts was explored. The large number of radial cooling ducts drastically increases the impact of the stack end area effects, because the stator stack consists of numerous substacks. The effects of the radial cooling ducts on the effective axial length of the machine were studied by analyzing the crosssection of the machine in the axial direction. The method to compensate the magnet end area leakage was considered. The effect of the cooling ducts and the stack end area effects on the no-load voltages and inductances of the machine were explored by using numerical analysis tools based on the three-dimensional finite element method. The electrical efficiency of the permanent magnet machine with different control methods was estimated analytically over the whole speed and torque range. The electrical efficiencies achieved with the most common control methods were compared with each other. The stator voltage increase caused by the armature reaction was analyzed. The effect of inductance saturation as a function of load current was implemented to the analytical efficiency calculation.

Jännitteenkorotin heikkoihin jakeluverkkoihin

Sähkönkulutuksen kasvaessa jakeluverkossa syntyy yhä enemmän jännitteenalenemia, jotka ylittävät sähkön laatustandardin asettamat raja-arvot. Jännitteenalenemista kärsivät etenkin syrjäseuduilla asuvat ihmiset, joiden käyttökohteet sijaitsevat kaukana jakelumuuntajasta. Perinteinen tapa on ollut kasvattaa syöttävän jakelukaapelin poikkipinta-alaa ja vaihtaa jakelumuuntaja suurempaan ongelman ratkaisemiseksi, mutta investointi on kuitenkin kallis eikä välttämättä maksa itseään koskaan takaisin. On myös mahdollista, että aiempaa suuremman muuntajan tyhjäkäyntihäviöillä on huonontava vaikutus järjestelmän energiatehokkuuteen. Tällöin voi olla kokonaistaloudellisesti kannattavampaa liittää sähköverkkoon laite, jolla voidaan korjata jännitteenalenemia. Diplomityössä tutkitaan säästömuuntajaan perustuvaa jännitteenkorotinta, jolla voidaan vähentää jakeluverkon jännitteenalenemien aiheuttamia haittoja. Työssä tutkitaan laitteen eri kytkintopologioita sekä niiden ohjausmenetelmiä, joilla voidaan muuttaa säästömuuntajan käämikierrosmääriä sen ollessa kuormitettuna.

Rovakaira Oy:n keskijänniteverkon kehittämissuunnitelma toimitusvarmuuskriteeristön näkökulmasta

Diplomityössä tavoitteena on etsiä teknistaloudellisimmat ratkaisut sekä tutkia niiden vaikutuksia sähkönjakeluverkoston käyttövarmuuteen ja luotettavuuteen toimitusvarmuuskriteeristön näkökulmasta. Lisäksi työssä esitetään uusi tunnusluku kriteeristön ylityksestä aiheutuvan haitan arvostukseen. Merkittävä osa Rovakaira Oy:n keskijänniteverkosta joudutaan uusimaan lähivuosikymmeninä teknistaloudellisen pitoajan täyttyessä. Verkon uusiminen antaa mahdollisuuden toteuttaa verkkoa nykyisiin vaatimuksiin paremmin sopivilla ratkaisuilla. Kehitysvaihtoehtoina vertaillaan johdon tien varteen siirtoa, maastokatkaisijoiden lisäämistä, pienitehoisten ja päättyvien haarajohtojen korvaamista 1 kV tekniikalla sekä pienoissähköaseman kannattavuutta. Työssä tarkastellaan yksityiskohtaisemmin Sodankylän käyttövarmuuden parantamista sähköasemavian aikana ja alueen kuormituksenkasvuun varautumista.

Transport of broilers: load microclimate during Brazilian summer

The objective of this study was to characterize the microclimatic profile of broiler transport trucks under commercial conditions, in the summer, by continuous monitoring of environmental variables (temperature and air relative humidity). Three loads were monitored from farm to slaughterhouse, considering factors such as distance and day periods (morning, afternoon, and night). To obtain the profile of the environmental variables during journey, data loggers, that determined the microclimate to which birds were submitted, were installed in the trucks; data loggers also allowed visualization of the Enthalpy Comfort Index (ECI) so that load regions could be classified according to heat comfort limits for 6-week old poultries. Temperature, relative humidity, and ECI in the truck were analyzed, using geostatistics, by the ordinary kriging method. The afternoon was the most critical period, and truck central and rear regions were most problematic for chickens, thus most susceptible to losses.