Light curing through glass ceramics with a second- and a third-generation LED curing unit: effect of curing mode on the degree of conversion of dual-curing resin cements

Objectives The aim of this study was to measure the degree of conversion (DC) of five dual-curing resin cements after different curing modes with a second- and a third-generation light-emitting diode (LED) curing unit. Additionally, irradiance of both light curing units was measured at increasing distances and through discs of two glass ceramics for computer-aided design/manufacturing (CAD/CAM). Materials and methods Irradiance and spectra of the Elipar FreeLight 2 (Standard Mode (SM)) and of the VALO light curing unit (High Power Mode (HPM) and Xtra Power Mode (XPM)) were measured with a MARC radiometer. Irradiance was measured at increasing distances (control) and through discs (1.5 to 6 mm thickness) of IPS Empress CAD and IPS e.max CAD. DC of Panavia F2.0, RelyX Unicem 2 Automix, SpeedCEM, BisCem, and BeautiCem SA was measured with an attenuated total reflectance–Fourier transform infrared spectrometer when self-cured (negative control) or light cured in SM for 40 s, HPM for 32 s, or XPM for 18 s. Light curing was performed directly (positive control) or through discs of either 1.5- or 3-mm thickness of IPS Empress CAD or IPS e.max CAD. DC was analysed with Kruskal–Wallis tests followed by pairwise Wilcoxon rank sum tests (α = 0.05). Results Maximum irradiances were 1,545 mW/cm2 (SM), 2,179 mW/cm2 (HPM), and 4,156 mW/cm2 (XPM), and all irradiances decreased by >80 % through discs of 1.5 mm, ≥95 % through 3 mm, and up to >99 % through 6 mm. Generally, self-curing resulted in the lowest DC. For some cements, direct light curing did not result in higher DC compared to when light cured through ceramic discs. For other cements, light curing through ceramic discs of 3 mm generally reduced DC. Conclusions Light curing was favourable for dual-curing cements. Some cements were more susceptible to variations in curing mode than others. Clinical relevance When light curing a given cement, the higher irradiances of the third-generation LED curing unit resulted in similar DC compared to the second-generation one, though at shorter light curing times.

Quinoa production in the Nor Lipez province (Bolivia): Gender roles in export-led agriculture and challenges for research on rural employment

The recent increase in prices and production of quinoa have had important effects on the employment structures and livelihoods of rural communities in the Nor Lipez Province (Bolivia). The "quinoa boom" resulted in significant changes in household incomes and in gender roles in the context of increasing market integration. The nature of these changes however is not easy to grasp, as new official narratives on gender and on traditional systems of labour divisions and shared access to land have surfaced since the election of Evo Morales (2006) and the adoption of a new constitution (2009). Furthermore, rural employment is found to be much more diverse than the term suggests. Women have always participated in the production of quinoa when it was widely considered as a subsistence crop. Our research takes place in the Nor Lipez Province, Bolivia with exploratory studies that were conducted in January and February 2015 in 8 rural communities of quinoa producers. Preliminary results suggest positive effects for local women in that they managed to earn additional income which might have contributed to their empowerment. This article will present both preliminary results, challenges for gender-oriented research in Bolivia and the methodology aiming to capture changes at the individual, the household and the community level through a survey that will be conducted from September to November 2015 in 500 households.

TrypanoCyc: a community-led biochemical pathways database for Trypanosoma brucei.

The metabolic network of a cell represents the catabolic and anabolic reactions that interconvert small molecules (metabolites) through the activity of enzymes, transporters and non-catalyzed chemical reactions. Our understanding of individual metabolic networks is increasing as we learn more about the enzymes that are active in particular cells under particular conditions and as technologies advance to allow detailed measurements of the cellular metabolome. Metabolic network databases are of increasing importance in allowing us to contextualise data sets emerging from transcriptomic, proteomic and metabolomic experiments. Here we present a dynamic database, TrypanoCyc (http://www.metexplore.fr/trypanocyc/), which describes the generic and condition-specific metabolic network of Trypanosoma brucei, a parasitic protozoan responsible for human and animal African trypanosomiasis. In addition to enabling navigation through the BioCyc-based TrypanoCyc interface, we have also implemented a network-based representation of the information through MetExplore, yielding a novel environment in which to visualise the metabolism of this important parasite.

Diagnostic performance of a new red light LED device for approximal caries detection

The aim of this study was to test a newly developed LED-based fluorescence device for approximal caries detection in vitro. We assembled 120 extracted molars without frank cavitations or fillings pairwise in order to create contact areas. The teeth were independently assessed by two examiners using visual caries detection (International Caries Detection and Assessment System, ICDAS), bitewing radiography (BW), laser fluorescence (LFpen), and LED fluorescence (Midwest Caries I.D., MW). The measurements were repeated at least 1 week later. The diagnostic performance was calculated with Bayesian analyses. Post-test probabilities were calculated in order to judge the diagnostic performance of combined methods. Reliability analyses were performed using kappa statistics for nominal data and intraclass correlation (ICC) for absolute data. Histology served as the gold standard. Sensitivities/specificities at the enamel threshold were 0.33/0.84 for ICDAS, 0.23/0.86 for BW, 0.47/0.78 for LFpen, and 0.32/0.87 for MW. Sensitivities/specificities at the dentine threshold were 0.04/0.89 for ICDAS, 0.27/0.94 for BW, 0.39/0.84 for LFpen, and 0.07/0.96 for MW. Reliability data were fair to moderate for MW and good for BW and LFpen. The combination of ICDAS and radiography yielded the best diagnostic performance (post-test probability of 0.73 at the dentine threshold). The newly developed LED device is not able to be recommended for approximal caries detection. There might be too much signal loss during signal transduction from the occlusal aspect to the proximal lesion site and the reverse.

Ribes odoriferum C. Koch (Ribes orientale Led. nec Desf. und villosum C. Koch nec Roxb.)

anonym

The effectiveness of a promotora-led intervention for Mexican Americans with type 2 diabetes

Purpose. The purpose of this randomized control repeated measures trial was to determine the effectiveness of a self-management intervention led by community lay workers called promotoras on the health outcomes of Mexican Americans with type 2 diabetes living in a major city on the Texas - Mexico border. The specific aims of this study, in relation to the intervention group participants, were to: (1) decrease the glycosylated hemoglobin (A1c) blood levels at the six-month assessment, (2) increase diabetes knowledge at the three and six-month assessments, and (3) strengthen the participants' beliefs in their ability to manage diabetes at the three and six-month assessments.^ Methods. One hundred and fifty Mexican American participants were recruited at a Catholic faith-based clinic and randomized into an intervention group and a usual-care control group. Personal characteristics, acculturation and baseline A1c, diabetes knowledge and diabetes health beliefs were measured. The six-month, two-phase intervention was culturally specific and it was delivered entirely by promotoras. Phase One of the intervention consisted of sixteen hours of participative group education and bi-weekly telephone contact follow-up. Phase Two consisted of bi-weekly follow-up using inspirational faith-based health behavior change postcards. The A1c levels, diabetes knowledge and diabetes health beliefs were measured at baseline, and three and six months post-baseline. The mean changes between the groups were analyzed using analysis of covariance. ^ Results. The 80% female sample, with a mean age of 58 years, demonstrated very low: acculturation, income, education, health insurance coverage, and strong Catholicism. No significant changes were noted at the three-month assessment, but the mean change of the A1c levels (F (1, 148 = 10.28, p < .001) and the diabetes knowledge scores (F (1, 148 = 9.0, p < .002) of the intervention group improved significantly at six months, adjusting for health insurance coverage. The diabetes health belief scores decreased in both groups.^ Conclusions. This study demonstrated that an intervention led by promotoras could result in decreased A1c levels and increased diabetes knowledge in spite of the very low acculturation, educational level and insurance coverage of the intervention group participants. Clinical implications and recommendations for future research are suggested. ^

Investigator/IRB-led community communication in genetic research: A descriptive feasibility pilot study

This pilot study, conducted in the Houston, TX, area, established a structured dialogue among a university Institutional Review Board, its researchers, and its local community members (i.e. pool of potential research participants) for the purpose of further educating all three parties about genetic research and community concerns related to such research. An IRB-designed educational presentation aimed at assisting potential subjects in making an informed decision to participate in genetic research was provided to four community groups (n=54); this presentation also included a current example of genetic research being conducted in the community as explained by the researcher, and a question-and-answer session designed to assist the IRB and the researcher in understanding the community's concerns about genetic research. Comparisons of pre- and post- presentation community questionnaires indicate that the joint presentation was effective in increasing community knowledge about genetic research, most notably related to the risks and benefits of this research to the individual, as well as the understanding that protections are in place for research participants. While researchers are optimistic about the idea of a collaborative effort with the IRB and the community, the feasibility of such a program and the benefit to the participating researchers remain unclear; additional research is necessary to establish the most effective method of communication for all groups involved, as well as to obtain statistically significant results with regard to race/ethnicity, gender, and education levels of community participants. ^

Export-Led Growth and Geographic Distribution of the Poultry Meat Industry in Brazil

This paper includes an examination of the sustainability of recent high growth in the poultry meat industry in Brazil. In addition, an assessment is made of the impact of increased production of poultry meat products on the development of local industries. Comparative studies of leading companies in the United States, Mexico, and Brazil reveal competitive advantages in the low costs of feedstuff and labor as well as disadvantages in the scale of business and management efficiency in the Brazilian poultry sector. Increases in domestic and foreign demand for Brazilian poultry meat have promoted development of the Brazilian poultry sector in local areas. The formation of industrial clusters is observed using regional data related to the location of slaughterhouses and the number of chickens farmed. Statistical analyses support observations made in this paper.

LED Jitter-Induced Limitation Effects in the Baud Rate of VLC

In this paper we show that the effect of jitter due to driver and LED is the limiting factor in the baud rate in L-PPM formats for VLC systems.