Revisiting borehole stresses in anisotropic elastic media : comparison of analytical versus numerical solutions

We present a rigorous validation of the analyticalAmadei solution for the stress concentration around arbitrarily orientated borehole in general anisotropic elastic media. First, we revisit the theoretical framework of the Amadei solution and present analytical insights that show that the solution does indeed contain all special cases of symmetry, contrary to previous understanding, provided that the reduced strain coefficients β11 and β55 are not equal. It is shown from theoretical considerations and published experimental data that the β11 and β55 are not equal for realistic rocks. Second, we develop a 3D finite-element elastic model within a hybrid analyticalnumerical workflow that circumvents the need to rebuild and remesh the model for every borehole and material orientation. Third, we show that the borehole stresses computed from the numerical model and the analytical solution match almost perfectly for different borehole orientations (vertical, deviated and horizontal) and for several cases involving isotropic and transverse isotropic symmetries. It is concluded that the analytical Amadei solution is valid with no restrictions on the borehole orientation or elastic anisotropy symmetry.

A comparison between conductive and infrared devices for measuring mean skin temperature at rest, during exercise in the heat, and recovery

Purpose: Skin temperature assessment has historically been undertaken with conductive devices affixed to the skin. With the development of technology, infrared devices are increasingly utilised in the measurement of skin temperature. Therefore, our purpose was to evaluate the agreement between four skin temperature devices at rest, during exercise in the heat, and recovery. Methods: Mean skin temperature (T̅sk) was assessed in thirty healthy males during 30 min rest (24.0± 1.2°C, 56 ± 8%), 30 min cycle in the heat (38.0 ± 0.5°C, 41 ± 2%), and 45 min recovery(24.0 ± 1.3°C, 56 ± 9%). T̅sk was assessed at four sites using two conductive devices(thermistors, iButtons) and two infrared devices (infrared thermometer, infrared camera). Results: Bland–Altman plots demonstrated mean bias ± limits of agreement between the thermistors and iButtons as follows (rest, exercise, recovery): -0.01 ± 0.04, 0.26 ± 0.85, -0.37 ± 0.98°C; thermistors and infrared thermometer: 0.34 ± 0.44, -0.44 ± 1.23, -1.04 ± 1.75°C; thermistors and infrared camera (rest, recovery): 0.83 ± 0.77, 1.88 ± 1.87°C. Pairwise comparisons of T̅sk found significant differences (p < 0.05) between thermistors and both infrared devices during resting conditions, and significant differences between the thermistors and all other devices tested during exercise in the heat and recovery. Conclusions: These results indicate poor agreement between conductive and infrared devices at rest, during exercise in the heat, and subsequent recovery. Infrared devices may not be suitable for monitoring T̅sk in the presence of, or following, metabolic and environmental induced heat stress.

From the bush to the burbs : a comparison of driver situation awareness at rural and urban railway level crossings

The problem of collisions between road users and trains at rail level crossings (RLXs) remains resistant to current countermeasures. One factor underpinning these collisions is poor Situation Awareness (SA) on behalf of the road user involved (i.e. not being aware of an approaching train). Although this is a potential threat at any RLX, the factors influencing SA may differ depending on whether the RLX is located in a rural or urban road environment. Despite this, there has been no empirical investigation regarding how road user SA might differ across distinct RLX environments. This knowledge is needed to establish the extent to which a uniform approach to RLX design and safety is acceptable. The aim of this paper is to investigate the differences in driver SA at rural versus urban RLXs. We present analyses of driver SA in both rural and urban RLX environments based on two recent on-road studies undertaken in Victoria, Melbourne. The findings demonstrate that driver SA is markedly different at rural and urban RLXs, and also that poor SA regarding approaching trains may be caused by different factors. The implications for RLX design and safety are discussed.

The impact of Internet marketing capabilities on international network capability, a cross country study comparison between Australia, Chile and Taiwan internationalised SMEs

The Internet has been shown to positively enhance internationalisation for SMEs, but scant empirical testing limits our understanding of the explicit impact of the Internet on firm internationalisation. This paper highlights key areas where the integration of the Internet can be leveraged through Internet-related capabilities within the internationalisation of the firm. Specifically, this study investigates how Internet marketing capabilities play a role in altering international information availability, international strategic orientation, and international business network relationships. This study provides evidence, indicating that these key relationships may vary between countries. To examine these key relationships this study utilises draws from data small and medium sized enterprises (SMEs) in three export intensive markets; Australia (215 international SMEs), Chile (204 international SMEs) and Taiwan (130 international SMEs); and tests a conceptual model through structural equation modelling. Results from the data show the impact of Internet marketing capabilities in positively impacting traditional internationalisation elements, which varies between countries. That is, our findings highlight the international business network relationships in Australia and Taiwan are directly impacted by Internet marketing capabilities, but not in Chile. We offer some insight into why we see variance across comparative exporting countries in how they leverage new technological capabilities for internationalisation and firm performance.

Planning and governance approaches for protecting World Heritage Areas: A comparison of the Great Barrier Reef and the Florida Everglades

The focus of this paper is on two World Heritage Areas: the Great Barrier Reef in Queensland, Australia and the Everglades in Florida. While both are World Heritage listed by the UNESCO, the Everglades is on the "World Heritage in Danger" list and the Great Barrier Reef could be on this list within the next year if present pressures continue. This paper examines the planning approaches and governance structures used in these two areas (Queensland and Florida) to manage the growth and development pressures. To make the analysis manageable, given the scale of these World Heritage areas, case studies at the local government level will be used: the Cairns Regional Council in Queensland and Monroe County in Florida. The case study analysis will involve three steps: (1) examination of the various plans at the federal, state, local levels that impact upon environmental quality in the Great Barrier Reef and Everglades; (2) assessing the degree to which these plans have been implemented; and (3) determine if (and how) the plans have improved environmental quality. In addition to the planning analysis we will also examine the governance structures (Lebel et al. 2006) within which planning operates. In any comparative analysis context is important (Hantrais 2009). Contextual differences between Queensland and Florida have previously been examined by Sipe, et al. (2007) and will be used as the starting point for this analysis. Our operating hypothesis and preliminary analysis suggests that the planning approaches and governance structures used in Florida and Queensland are considerably different, but the environmental outcomes may be similar. This is based, in part, on Vella (2004) who did a comparative analysis of environmental practices in the sugar industry in Florida and Queensland. This research re-examines this hypothesis and broadens the focus beyond the sugar industry to growth and development more broadly.

Informing methods for preparing public health overviews of reviews: a comparison of public health overviews with Cochrane Overviews published between 1999 and 2014

Background: Overviews of systematic reviews (SRs) are useful for public health policy; however there is an absence of Cochrane Overviews covering public health (PH) topics. Objectives: We sought to analyze the methodological approaches used in existing Cochrane Overviews and Protocols for overviews (primarily clinical in nature), and compare these to the methods and approaches used in PH overviews (non-Cochrane). The intent was to identify issues that would be relevant for undertaking Cochrane overviews. Methods: We conducted a descriptive analysis of overviews published between 1999 and 2014. We searched the Cochrane Database of Systematic Reviews for Cochrane Protocols for overviews and Cochrane Overviews, and the HealthEvidence.org for PH overviews. The primary characteristics of the overviews and elements of the methodology were extracted and compared. Results: A total of 61 overviews of SRs were included in our analysis; specifically, this included 21 Cochrane Protocols for overviews, 15 Cochrane Overviews, and 27 non-Cochrane PH overviews. Amongst the overviews, the most significant differences are that PH overviews (non-Cochrane) tend to: include earlier and more reviews, greater number of participants, allow lower levels of evidence, use assessment tools other than AMSTAR (A Measurement Tool to Assess Systematic Reviews, i.e. a tool for assessing quality of SRs), not assess quality of evidence in reviews, search more databases overall, specify search limits including English-only reviews, and not consider recent primary studies for inclusion. Some of these differences clearly related to quality, however many relate to the nuances of PH interventions. Conclusions: The methodology in Cochrane overviews and PH overviews varies widely. Future PH overviews may benefit from the Cochrane methodology but the Cochrane approach requires modification to accommodate PH research methodology. Additionally, the use of databases that pre-screen and quality assess relevant PH systematic reviews may help expedite the search process.

Valuation of hospital bed-days released by infection control programs: A comparison of methods

We performed a contingent valuation survey to elicit the opportunity cost of bed-days consumed by healthcare-associated infections in 11 European hospitals. The opportunity cost of a bed-day was significantly lower than the accounting cost; median values were i72 and i929, respectively (P ! .001). Accounting methods overestimate the opportunity cost of bed-days...

A comparison of methods to estimate the extent of unlicensed driving: Literature review. Final report to Queensland Transport

Unlicensed driving is a serious problem in many countries, despite ongoing improvements in traffic law enforcement practices and technology. The term ‘unlicensed driver' is generally used to refer to people who operate a motor vehicle or motorcycle without a valid driver's licence, including those who: • have let their licence expire; • have been disqualified or suspended from driving; • hold an inappropriate class of licence for the vehicle they drive; • drive outside the restrictions of a special licence; • don’t currently hold a licence; or • have never held a licence.

Excitation of bound plasmons along nanoscale stripe waveguides: A comparison of end and grating coupling techniques

In this paper we excite bound long range stripe plasmon modes with a highly focused laser beam. We demonstrate highly confined plasmons propagating along a 50 μm long silver stripe 750 nm wide and 30 nm thick. Two excitation techniques were studied: focusing the laser spot onto the waveguide end and focusing the laser spot onto a silver grating. By comparing the intensity of the out-coupling photons at the end of the stripe for both grating and end excitation we are able to show that gratings provide an increase of a factor of two in the output intensity and thus out-coupling of plasmons excited by this technique are easier to detect. Authors expect that the outcome of this paper will prove beneficial for the development of passive nano-optical devices based on stripe waveguides, by providing insight into the different excitation techniques available and the advantages of each technique.

Comparison of Body Composition Assessment Methods in Breast Cancer Survivors

Purpose/Objectives: To examine and compare the reliability of four body composition methods commonly used in assessing breast cancer survivors. Design: Cross-sectional. Setting: A rehabilitation facility at a university-based comprehensive cancer center in the southeastern United States. Sample: 14 breast cancer survivors aged 40-71 years. Methods: Body fat (BF) percentage was estimated via bioelectric impedance analysis (BIA), air displacement plethysmography (ADP), and skinfold thickness (SKF) using both three- and seven-site algorithms, where reliability of the methods was evaluated by conducting two tests for each method (test 1 and test 2), one immediately after the other. An analysis of variance was used to compare the results of BF percentage among the four methods. Intraclass correlation coefficient (ICC) was used to test the reliability of each method. Main Research Variable: BF percentage. Findings: Significant differences in BF percentage were observed between BIA and all other methods (three-site SKF, p < 0.001; seven-site SKF, p < 0.001; ADP, p = 0.002). No significant differences (p > 0.05) in BF percentage between three-site SKF, seven-site SKF, and ADP were observed. ICCs between test 1 and test 2 for each method were BIA = 1, ADP = 0.98, three-site SKF = 0.99, and seven-site SKF = 0.94. Conclusions: ADP and both SKF methods produce similar estimates of BF percentage in all participants, whereas BIA overestimated BF percentage relative to the other measures. Caution is recommended when using BIA as the body composition method for breast cancer survivors who have completed treatment but are still undergoing adjuvant hormonal therapy. Implications for Nursing: Measurements of body composition can be implemented very easily as part of usual care and should serve as an objective outcome measure for interventions designed to promote healthy behaviors among breast cancer survivors. - See more at: https://onf.ons.org/onf/38/4/comparison-body-composition-assessment-methods-breast-cancer-survivors#sthash.5djfTS1Q.dpuf

Can different measures of intelligence be used interchangeably? A comparison of the Wechsler and Stanford-Binet scales

The Wechsler and Stanford Binet scales are among the most commonly used tests of intelligence. In clinical practice, they often seem to be used interchangeably. This paper reports the results of two studies that compared the most recent editions of two Wechsler scales (WPPSI-III and WISC-IV) with the Stanford-Binet Fifth Edition (SB5). The participants in the first study were 36 typically developing 4-year-old children who completed the WPPSI-III and SB5 in counter-balanced order. Although correlations of composite scores ranged from r = .59 to r = .82 and were similar to those reported for earlier versions of the two instruments, more than half the sample had a score discrepancy greater than 10 points across the two instruments. In the second study, the WISC-IV and SB5 were administered to 30 children aged 12-14 years. There was a significant difference between Full Scale IQs on the two measures, with scores being higher on the WISC-IV. Differences between the two verbal scales were also significant and favoured the WISC-IV. There were moderate correlations of Full Scale IQs (r = .58) and Nonverbal IQs (r = .54) but the relationship between the two Verbal scales was not significant. For some children, notable score differences led to different categorisations of their level of intellectual ability The findings suggest that the Wechsler and Stanford Binet scales cannot be presumed to be interchangeable. The discussion focuses on how psychologists might reconcile large differences in test scores and the need for caution when interpreting and comparing test results.

Near infrared spectroscopy of marble from Chillagoe, Australia and in comparison with other selected natural carbonates

Marble from the Chillagoe deposits was extensively used in the construction of Australia’s parliament house. Near infrared (NIR) spectroscopy has been applied to study the quality of marble from the Chillagoe marble deposits and to distinguish between different types of marble in the Chillagoe deposits. A comparison of the NIR spectra of marble with dolomite and monohydrocalcite is made. The spectrum of the marble closely resembles that of monohydrocalcite and is different from that of dolomite. The infrared spectra of the minerals are characterised by OH and water stretching vibrations. Both the first and second fundamental overtones of these bands are observed in the NIR spectra. Marble is characterised by NIR bands at 4005, 4268 and 4340 cm–1, attributed to carbonate combination bands and overtones. Marble also shows NIR bands at 5005, 5106, 5234 and 5334 cm–1 assigned to water combination bands. Finally the NIR spectrum of the marble displays broad low-intensity features centred upon 6905 cm–1 attributed to the water first overtones. It appears feasible to identify marble through the use of NIR spectroscopy.

Raman and infrared spectroscopic characterization of the arsenate-bearing mineral tangdanite– and in comparison with the discredited mineral clinotyrolite

The minerals clinotyrolite and fuxiaotuite are discredited in terms of the mineral tangdanite. The mixed anion mineral tangdanite Ca2Cu9(AsO4)4(SO4)0.5(OH)9 9H2O has been studied using a combination of Raman and infrared spectroscopy. Characteristic bands associated with arsenate, sulphate and hydroxyl units are identified. Broad bands in the OH stretching region are observed and are resolved into component bands. These bands are assigned to water and hydroxyl stretching vibrations. Two intense Raman bands at 837 and approximately 734 cm−1 are assigned to the ν1 (AsO4)3− symmetric stretching and ν3 (AsO4)3− antisymmetric stretching modes. Infrared bands at 1023 cm−1 are assigned to the (SO4)2− ν1 symmetric stretching mode, and infrared bands at 1052, 1110 and 1132 cm−1 assigned to (SO4)2− ν3 antisymmetric stretching modes, confirming the presence of the sulphate anion in the tangdanite structure. Raman bands at 593 and 628 cm−1 are attributed to the (SO4)2− ν4 bending modes. Low-intensity Raman bands found at 457 and 472 cm−1 are assigned to the (AsO4)3− ν2 bending modes. A comparison is made with the previously obtained spectral data on the discredited mineral clinotyrolite.

Examining the role of wine brand love on brand loyalty: A multi-country comparison

This study develops and tests a model through a multi-country study that considers consumer wine knowledge and wine experience, wine brand trust and wine brand satisfaction as antecedents of wine brand love, and wine brand loyalty as a consequence of wine brand love. Data were collected in five wine-producing countries (Australia, Chile, France, Mexico and Portugal) with a final sample of 3462 completed surveys. Hypotheses were tested with structural equation modeling and the findings confirm the importance of brand love as both a mediator and direct influence on brand loyalty for wine consumers. Furthermore, brand satisfaction was positively and significantly related to brand love. In addition, wine experience, rather than wine knowledge, positively influenced brand trust and satisfaction. Finally, results also identify differences between countries thereby providing insights into how companies should focus their marketing strategies internationally.