Designing a sampling scheme to reveal correlations between weeds and soil properties at multiple spatial scales

Weeds tend to aggregate in patches within fields and there is evidence that this is partly owing to variation in soil properties. Because the processes driving soil heterogeneity operate at different scales, the strength of the relationships between soil properties and weed density would also be expected to be scale-dependent. Quantifying these effects of scale on weed patch dynamics is essential to guide the design of discrete sampling protocols for mapping weed distribution. We have developed a general method that uses novel within-field nested sampling and residual maximum likelihood (REML) estimation to explore scale-dependent relationships between weeds and soil properties. We have validated the method using a case study of Alopecurus myosuroides in winter wheat. Using REML, we partitioned the variance and covariance into scale-specific components and estimated the correlations between the weed counts and soil properties at each scale. We used variograms to quantify the spatial structure in the data and to map variables by kriging. Our methodology successfully captured the effect of scale on a number of edaphic drivers of weed patchiness. The overall Pearson correlations between A. myosuroides and soil organic matter and clay content were weak and masked the stronger correlations at >50 m. Knowing how the variance was partitioned across the spatial scales we optimized the sampling design to focus sampling effort at those scales that contributed most to the total variance. The methods have the potential to guide patch spraying of weeds by identifying areas of the field that are vulnerable to weed establishment.

Extractability and characteristics of proteins deriving from wheat DDGS

Wheat Distillers’ Dried Grains with Solubles (DDGS) and in-process samples were used for protein extraction. Prolamins were the predominant protein components in the samples. The absence of extractable α- and γ-gliadins in DDGS indicated protein aggregation during the drum drying processing stage. Prolamin extraction was performed using 70% (v/v) ethanol or alkaline-ethanol solution in the presence of reducing agent. DDGS extracts had relatively low protein contents (14-44.9%, w/w), regardless of the condition applied. The wet solids were the most suitable raw material for protein extraction, with recovery yields of ~ 55% (w/w) and protein content of ~58% (w/w) in 70% (v/v) ethanol. Protein extracts from wet solids were significantly rich in glutamic acid and proline. Mass balance calculations demonstrated the high carbohydrate content (~ 50%, w/w) of solid residues. Overall, the feasibility of utilising in-process samples of DDGS for protein extraction with commercial potential was demonstrated.

Evaluating glucose and xylose as cosubstrates for lipid accumulation and c-linolenic acid biosynthesis of Thamnidium elegans

Aims: To study the biotechnological production of lipids containing rich amounts of the medically and nutritionally important c-linolenic acid (GLA), during cultivation of the Zygomycetes Thamnidium elegans, on mixtures of glucose and xylose, abundant sugars of lignocellulosic biomass. Methods and Results: Glucose and xylose were utilized as carbon sources, solely or in mixtures, under nitrogen-limited conditions, in batch-flask or bioreactor cultures. On glucose, T. elegans produced 31.9 g/L of biomass containing 15.0 g/L lipid with significantly high GLA content (1014 mg/L). Xylose was proved to be an adequate substrate for growth and lipid production. Additionally, xylitol secretion occurred when xylose was utilized as carbon source, solely or in mixtures with glucose. Batch-bioreactor trials on glucose yielded satisfactory lipid production, with rapid substrate consumption rates. Analysis of intracellular lipids showed that the highest GLA content was observed in early stationary growth phase, while the phospholipid fraction was the most unsaturated fraction of T. elegans. Conclusions: Thamnidium elegans represents a promising fungus for the successful valorization of sugar-based lignocellulosic residues into microbial lipids of high nutritional and pharmaceutical interest.

Rhodosporidium toruloides cultivated in NaCl-enriched glucose-based media: adaptation dynamics and lipid production

In the present report and for the first time in the international literature, the impact of the addition of NaCl upon growth and lipid production on the oleaginous yeast Rhodosporidium toruloides was studied. Moreover, equally for first time, lipid production by R. toruloides was performed under non-aseptic conditions. Therefore, the potentiality of R. toruloides DSM 4444 to produce lipid in media containing several initial concentrations of NaCl with glucose employed as carbon source was studied. Preliminary batch-flask trials with increasing amounts of NaCl revealed the tolerance of the strain against NaCl content up to 6.0% (w/v). However, 4.0% (w/v) of NaCl stimulated lipid accumulation for this strain, by enhancing lipid production up to 71.3% (w/w) per dry cell weight. The same amount of NaCl was employed in pasteurized batch-flask cultures in order to investigate the role of the salt as bacterial inhibiting agent. The combination of NaCl and high glucose concentrations was found to satisfactorily suppress bacterial contamination of R. toruloides cultures under these conditions. Batch-bioreactor trials of the yeast in the same media with high glucose content (up to 150 g/L) resulted in satisfactory substrate assimilation, with almost linear kinetic profile for lipid production, regardless of the initial glucose concentration imposed. Finally, fed-batch bioreactor cultures led to the production of 37.2 g/L of biomass, accompanied by 64.5% (w/w) of lipid yield. Lipid yield per unit of glucose consumed received the very satisfactory value of 0.21 g/g, a value amongst the highest ones in the literature. The yeast lipid produced contained mainly oleic acid and to lesser extent palmitic and stearic acids, thus constituting a perfect starting material for “second generation” biodiesel

Nonrecurrent MECP2 duplications mediated by genomic architecture-driven DNA breaks and break-induced replication repair

Recurrent submicroscopic genomic copy number changes are the result of nonallelic homologous recombination (NAHR). Nonrecurrent aberrations, however, can result from different nonexclusive recombination-repair mechanisms. We previously described small microduplications at Xq28 containing MECP2 in four male patients with a severe neurological phenotype. Here, we report on the fine-mapping and breakpoint analysis of 16 unique microduplications. The size of the overlapping copy number changes varies between 0.3 and 2.3 Mb, and FISH analysis on three patients demonstrated a tandem orientation. Although eight of the 32 breakpoint regions coincide with low-copy repeats, none of the duplications are the result of NAHR. Bioinformatics analysis of the breakpoint regions demonstrated a 2.5-fold higher frequency of Alu interspersed repeats as compared with control regions, as well as a very high GC content (53%). Unexpectedly, we obtained the junction in only one patient by long-range PCR, which revealed nonhomologous end joining as the mechanism. Breakpoint analysis in two other patients by inverse PCR and subsequent array comparative genomic hybridization analysis demonstrated the presence of a second duplicated region more telomeric at Xq28, of which one copy was inserted in between the duplicated MECP2 regions. These data suggest a two-step mechanism in which part of Xq28 is first inserted near the MECP2 locus, followed by breakage-induced replication with strand invasion of the normal sister chromatid. Our results indicate that the mechanism by which copy number changes occur in regions with a complex genomic architecture can yield complex rearrangements.

Insights on eukaryotic translation initiation factor 5A (eIF5A) in the brain and aging

Long-term memory, a persistent form of synaptic plasticity, requires translation of a subset of mRNA present in neuronal dendrites during a short and critical period through a mechanism not yet fully elucidated. Western blotting analysis revealed a high content of eukaryotic translation initiation factor 5A (eIF5A) in the brain of neonatal rats, a period of intense neurogenesis rate, differentiation and synaptic establishment, when compared to adult rats. Immunohistochemistry analysis revealed that eIF5A is present in the whole brain of adult rats showing a variable content among the cells from different areas (e.g. cortex, hippocampus and cerebellum). A high content of eIF5A in the soma and dendrites of Purkinje cells, key neurons in the control of motor long-term memory in the cerebellum, was observed. Detection of high eIF5A content was revealed in dendritic varicosities of Purkinje cells. Evidence is presented herein that a reduction of eIF5A content is associated to brain aging. (C) 2008 Elsevier B.V. All rights reserved.

gamma-zein secondary structure in solution by circular dichroism

The proline-rich N-terminal domain of gamma-zein has been reported in relevant process, which include its ability to cross the cell membranes. Evidences indicate that synthetic hexapeptide (PPPVHL), naturally found in N-terminal portion of gamma-zein, can adopt the polyproline II (PPII) conformation in aqueous solution. The secondary structure of gamma-zein in maize protein bodies had been analyzed by solid state Fourier transform infrared and nuclear magnetic resonance spectroscopies. However, it was not possible to measure PPII content in physiological environment since the beta-sheet and PPII signals overlap in both solid state techniques. Here, the secondary structure of gamma-zein has been analyzed by circular dichroism in SDS aqueous solution with and without ditiothreitol (DTT), and in 60% of 2-propanol and water with DTT The results show that gamma-zein has high helical content in all solutions. The PPII conformation was present at about 7% only in water/DTT solution. (c) 2007 Wiley Periodicals, Inc.

Induced polarization, resistivity, and self-potential: a case history of contamination evaluation due to landfill leakage

This article compares the efficiency of induced polarization (IP) and resistivity in characterizing a contamination plume due to landfill leakage in a typical tropical environment. The resistivity survey revealed denser electrical current flow that induced lower resistivity values due to the high ionic content. The increased ionic concentration diminished the distance of the ionic charges close to the membrane, causing a decrease in the IP phenomena. In addition, the self-potential (SP) method was used to characterize the preferential flow direction of the area. The SP method proved to be effective at determining the flow direction; it is also fast and economical. In this study, the resistivity results were better correlated with the presence of contamination (lower resistivity) than the IP (lower chargeability) data.

Application of solid sampling device for direct determination of chromium and nickel in lubricating oils by graphite furnace atomic absorption spectrometry

One method using a solid sampling device for the direct determination of Cr and Ni in fresh and used lubricating oils by graphite furnace atomic absorption spectrometry are proposed. The high organic content in the samples was minimized using a digestion step at 400 degrees C in combination with an oxidant mixture 1.0% (v v(-1)) HNO3+15% (v v(-1)) H2O2+0.1% (m v(-1)) Triton X-100 for the in situ digestion. The 3-field mode Zeeman-effect allowed the spectrometer calibration up to 5 ng of Cr and Ni. The quantification limits were 0.86 mu g g(-1) for Cr and 0.82 mg g(-1) for Ni, respectively. The analysis of reference materials showed no statistically significant difference between the recommended values and those obtained by the proposed methods.

Biobased composites from tannin-phenolic polymers reinforced with coir fibers

Tannin-phenolic polymers prepared using tannin, a macromolecule obtained from natural sources, were used in the preparation of composites reinforced with coir fibers. The composites based on tannin-phenolic polymers (50% (w/w) of tannin as substitute of the phenol) were prepared using the coir fibers as reinforcement (30-70% (w/w), 3.0-6.0 cm, randomly distributed). The Izod impact strength of the composites showed an improvement in this property due to the incorporation of coir fibers in the tannin-phenolic matrices. The SEM images showed excellent adhesion at the fiber/matrix interface. The coir fiber had bundles regularly spaced, which enhanced the diffusion of the resin into the fiber. In addition, the high lignin content of this fiber results in a high concentration of aromatic rings, which increased the compatibility with the matrix. The values of the diffusion coefficient of water, determined using Fick`s laws, show that there was no correlation between the fiber percentage and the water diffusion. The DMTA curves showed that the storage moduli of the composites reinforced with coir fibers were considerably higher than that of the thermoset, and the increase in the proportion of fibers led to a proportional increase in the storage moduli of these materials. The biobased composites obtained have potential for non-structural applications, such as in the internal parts of automotives vehicles. To our knowledge, this is the first study on this kind of biobased composites. (C) 2010 Elsevier B.V. All rights reserved.

Uma avaliação ex-ante do impacto sobre a capacidade tecnológica da localidade acolhedora das empresas que aderiram ao regime automotivo brasileiro e os seus desdobramentos estaduais : o caso da instalação da General Motors do Brasil em Gravataí, Rio Grande do Sul

Esta tese discute três temas: políticas públicas, gestão tecnológica, e setor automotivo. Tendo por objetivo abreviar o ciclo de absorção e desenvolvimento de tecnologia, um volume expressivo de recursos tem sido transferido do setor público para o setor privado através do que é denominado de Política Pública Indutora (PPI). Os governos pretendem, assim, atrair aquelas empresas tecnologicamente mais capacitadas, na expectativa de que transfiram para a localidade onde se instalam o conhecimento que detêm. No Brasil, um dos setores-alvo deste tipo de política tem sido o automotivo, circunstância observada em diferentes momentos da história. Efetivamente, o Regime Automotivo Brasileiro pretende não apenas acelerar o desenvolvimento do país, mas também promover uma significativa transferência de tecnologia. A análise das PPI, por ser de extrema importância, é bastante influenciada e dificultada quer por seus defensores, quer por seus destratores, que as veêm sob os aspectos de sucesso ou não; mas, não bastasse essa dificuldade, há também o elevado conteúdo ideológico que sustenta as argumentações, que faz com que a avaliação se perca num quadro inconclusivo. Afinal, estas iniciativas são benéficas ou não para o país e para as economias regionais? Finalmente, a eficácia, e portanto o acerto desta estratégia só pode ser avaliado expost facto, quando já comprometidos, quiçá irremediavelmente, os recursos públicos. Por essa razão, este estudo desenvolve uma análise ex-ante das políticas públicas do tipo indutoras, fazendo uso de um modelo compreensivo que permite uma análise longitudinal, captando assim, as mudanças no ambiente. Entre outras, procurou-se responder à seguinte questão: é possível, hoje, inferir quanto à contrib uição, se positiva ou negativa, que o Regime Automotivo Brasileiro e os seus desdobramentos estaduais trarão à capacidade tecnológica no entorno da empresa atraída? O problema e a questão de pesquisa foram abordados, predominantemente, sob um enfoque qualitativo, e o método escolhido foi o estudo de caso. Com o auxílio do modelo proposto foi analisada e avaliada a potencialidade de aumento na capacidade tecnológica induzida pela instalação da unidade montadora da General Motors do Brasil, em Gravataí, Rio Grande do Sul. Ao final conclui- se que os benefícios previstos pelo Regime Automotivo Brasileiro, no que diz respeito a capacitação tecnológica local, dificilmente serão atingidos pela instalação de novas empresas automotivas ou a modernização das existentes.

Caracterização para o beneficiamento do carvão de Candiota

O presente trabalho apresenta estudos sistemãticos da caracterização do carvão de Candiota em termos do seu beneficiamento. O carvão de Candiota possui caracteristicas de moabilidade que o indicam como bastantefriável. A geração de finos (-28 malhas) atinge valores superiores a 20% independente do grau de britagem . As distribuições granulométricas resultantes da britagem do carvão obedecem a equação de ROSIN-RAIIMLER-BENNETT, dentro do intervalo previsto (frações menores do ue -4 malhas e maiores do que 100 malhas). Os valores de n e d ' não variam significativamente com a abertura do britador o, que evidencia sua friabiliade. foram estabelecidas equações que relacionam aberturado britador, coeficientes de distribuição e diâmetro médio.Estudos rni croscópicos demonstraram que, o grau de d i-s seminação da matéria inorgânica é muitointenso , e sua liberação atinge malhas muito pequenas (provavelmente menores do que 400 malhas). O teor de cinzas, como por exemplo do grau de disseminação, não variou significativamente com a diminuição de tamanho, como acontece com outros carvões. Foram estabelecidos dois critérios de liberação das particulas em função da quantidade de matéria carbonosa presente nas unidades mistas (20 - 80% e 5 - 95%, respectivamente). Estes indices de partyculas mistas (5 - 95% de matéria carbonosa) mantiveram-se constantes até tamanhos aproximados de 115 malhas, para logo diminuirem nas frações menores. Ainda assim, para frações menores do que 53 micrômetro a quantidade de mistos ( 5 - 95%) foi de 34%. As curvas de lavabilidade deste carvão (tanto da fração grossa quanto afina), reflexo das caracteristicas anteriores, indicam-no como de muito dificil beneficiamento (lavagem). Isto basicamente é devido ao alto grau de "near gravity matterial" presente e de seu grau de liberação. 0s testes de jigagem por bateladas, bem como outros processos de beneficiamento, demonstraram a dificuldade do beneficiamento deste carvão. O melhor teste de jigagem por bateladas, obteve uma recuperação de materia carbonosa de 73, 21 com um teor de cinzas de 45,51 no concretado (alimentação contendo 50% de cinzas). de 37,59% de cinzas (alimentação de 50% de cinzas). Propõe-se, finalmente, um circuito de beneficiamento convencional do carvão de Candiota, incluindo uma classificação do carvão ROM com o objetivo de separar a alimentação em duas frações (+28 e -28 malhas), seguido de um processo de beneficiamento das frações grosseiras por meios densos (tanques), e um tratamento das frações finas por hidrociclonagem. Os resultados obtidos concluem que o carvão de Candiota é o mais dificil de ser lavado dentre os carvões sul-brasileiros devido ao alto teor de cinzas e ao grau de disseminação, sendo que este teor de cinzas não varia muito com a granulometria, o que implica em um grau de liberação muito baixo. Sugere- se como outra alternativa no seu beneficiamento, o estudo de processos não convencionais que incluem um alto grau de cominuiçáo ate completa liberação.

Investigando a experiência da fruição do futebol : estádio versus televisão

A pesquisa procura estudar a forma como o espetáculo futebol é percebido e valorizado por espectadores no estádio e na televisão. O modelo proposto por Holbrook (1999) sustenta a análise de narrativas que relatam comportamentos dos consumidores nos dois ambientes: arquibancada e sofá. Com base na abordagem sugerida por McCracken (1988), os dados foram coletados por entrevistas pessoais, em profundidade, que possibilitaram explorar as experiências dos entrevistados como espectadores regulares de futebol na televisão e no estádio. Foram analisados os tipos de valor do modelo de Holbrook (1999) mais representativos encontrados nos relatos. As narrativas indicaram substantivas diferenças entre os valores percebidos ao longo das experiências na arquibancada e no sofá. Esta dualidade serviu de fio condutor para a emergência de outros duplos conceituais extraídos das entrevistas - que se revelam subsídios para o desenvolvimento de estratégias de marketing. Concluiu-se que a valorização da partida de futebol é influenciada pela forma com a qual o espectador constrói os significados na experiência de consumo. Percebeu-se, desta forma, uma associação entre a abordagem semiológica (Eco, 2001), para a qual o valor (da informação) decorre das possibilidades de significados possíveis; e a proposição de Holbrook, para o qual o valor de consumo se sustenta numa vivência interativa. Impõe-se ao gestor, portanto, a missão de executar a tabelinha sofá-arquibancada. De maneira a potencializar seus respectivos atributos para o consumo - como a riqueza simbólica e a riqueza referencial - e a reforçar os traços complementares apontados nas entrevistas.

A cultura do girassol como estratégia de competitividade para o agronegócio regional e nacional: importância para a agroenergia e a alimentação

Equacionar aquecimento global, escassez de alimentos e a crescente necessidade energética, tornou-se, atualmente, o grande desafio mundial. Existem diversas culturas agrícolas que podem ser exploradas de maneira estratégica e assim colaborar com a solução deste problema. Dentre elas, pode-se destacar a cultura do girassol (Helianthus Annuus). O girassol é uma das quatro maiores culturas oleaginosas no mundo, cultivado com sucesso nos cinco continentes, ocupando uma área de cultivo superior a 22 milhões de hectares. A participação do Brasil nesse montante é inferior a 1%. Acredita-se que essa pequena participação se deva a fatores sócio-econômicos e tecnológicos. Salienta-se, porém que o Brasil, por suas vantagens comparativas naturais e vantagens competitivas construídas possui condições favoráveis para seu desenvolvimento. Diante dos fatos, o objetivo deste trabalho é aprofundar o conhecimento da cadeia produtiva do girassol e através de sua utilização como estratégia de competitividade, avaliar de maneira sistêmica os impactos na matriz agrícola do País. Dentre as inúmeras vantagens dessa cultura, pode-se destacar: características agronômicas, físicas, químicas, organolépticas e versatilidade, que permitem a utilização e otimização dos fatores de produção já disponíveis; época de plantio (adaptabilidade a diferentes condições edafoclimáticas), podendo ser cultivado desde o Rio Grande do Sul até o Estado de Roraima; sistema radicular (raiz pode chegar a dois metros de profundidade), permitindo o melhor aproveitamento dos nutrientes e da água do solo e promovendo a reciclagem de nutrientes; alto teor de óleo nas sementes (30% a 55%) e; alto valor comercial dos co-produtos. Esse conjunto de características é analisado sob a ótica da teoria das vantagens competitivas e das economias de escala e escopo, demonstrando que com inteligência e pragmatismo, a cultura do girassol pode repetir, com vantagens, o que a soja representou para o agronegócio brasileiro.

Estudo da potencialidade da incorporação de resíduo de granito e da queima da casca do café em cerâmica vermelha

The industrial production of ornamental rocks and the burning of coffee husk generate waste that is discarded into the environment. However, with the study of the incorporation of these residues in ceramic products, may be found an alternative to reducing environmental impacts and detrimental effects on human health caused by its indiscriminate disposal of waste in nature. Thus, this work aimed to study the addition of ashes of the coffee husk and granite residue in matrix of red ceramic. The raw materials were dry milled and sieved to mesh 100. To characterize the raw materials were carried out analyzes of X-ray diffraction (XRD), X-ray fluorescence (XRF), particle size analysis (PSA), differential thermal analysis (DTA) and thermogravimetric analysis (TG). Six formulations were prepared where the clay content was kept constant (70%wt) and ashes contents and granite residue varied from 10, 15, 20 and 30%. Dilatometrics analyzes were performed at four selected formulations, containing them: 100% clay (A100); 70% clay and 30% ashes (A70C30); 70% clay and 30% granite residue (A70G30); and 70% clay, 15% granite residue and 15% ashes (A70G15C15). The samples were prepared by uniaxial compaction with pressure of 25 MPa, and fired at temperatures of 800°C, 850ºC, 900ºC, 950ºC, 1000ºC and 1100°C. Assays were performed to determine the linear shrinkage of burning (LSB), water absorption (WA), apparent porosity (AP), density (D) and tensile bending. Also were performed analyzes of X-ray diffraction (XRD) and scanning electron microscopy (SEM) of the samples fired. The formulations incorporating granite residue and/or ashes reached the required limits of water absorption according to NBR 15270-1 and NBR 15310 and tensile bending according to classical literature (SANTOS, 1989) necessary for the production of tiles and ceramic block for masonry sealing