Descriptive study of HTLV infection in a population of pregnant women from the state of Pará, Northern Brazil

INTRODUÇÃO: No Brasil, estudos mostram que a soroprevalência do HTLV entre gestantes varia de 0 a 1,8%. Contudo, esta soroprevalência era desconhecida no Estado do Pará, Brasil. O presente estudo descreve, pela primeira vez, a soroprevalência do HTLV entre gestantes do Estado do Pará, Norte do Brasil. MÉTODOS: 13,382 gestantes foram submetidas à triagem para HTLV durante o pré-natal, e aquelas com sorologia alterada para anti-HTLV foram submetidas ao teste de Western Blot (WB), para confirmar e discriminar portadoras do HTLV-1 e do HTLV-2. RESULTADOS: A soroprevalência do HTLV na população de gestantes foi de 0,3%, sendo o HTLV-1 identificado em 95,3% das pacientes. O perfil demográfico das portadoras do HTLV foi de: mulheres com idade entre 20-40 anos (78,4%); residentes na região metropolitana de Belém (67,6%) e com nível educacional igual ao ensino médio (56,8%). Outras variáveis relacionadas à infecção foram: início das relações sexuais compreendido entre 12-18 anos (64,9%), e ter sido aleitada mais de 6 meses (51,4%). A maior parte das mulheres estudadas teve ao menos duas gestações anteriores (35,1%); e nenhum aborto (70,3%). Co-infecções (sífilis e HIV) foram descritas em 10,8% (4/37) das gestantes. A soroprevalência da infecção pelo HTLV em gestantes atendidas em Unidades Básicas de Saúde do Estado do Pará, Norte do Brasil foi de 0,3% semelhante à descrita em outros estudos brasileiros. As variáveis relacionadas com a infecção são indicadores importantes na identificação de gestantes com maior tendência a soropositividade pelo HTLV, sendo uma estratégia de controle e prevenção, evitando a transmissão vertical.

Influence of distance, geometry and number of control stations on quality of local geodetic networks for the purpose of georeferencing of rural properties

The implementation of local geodetic networks for georeferencing of rural properties has become a requirement after publication of the Georeferencing Technical Standard by INCRA. According to this standard, the maximum distance of baselines to GNSS L1 receivers is of 20 km. Besides the length of the baseline, the geometry and the number of geodetic control stations are other factors to be considered in the implementation of geodetic networks. Thus, this research aimed to examine the influence of baseline lengths higher than the regulated limit of 20 km, the geometry and the number of control stations on quality of local geodetic networks for georeferencing, and also to demonstrate the importance of using specific tests to evaluate the solution of ambiguities and on the quality of the adjustment. The results indicated that the increasing number of control stations has improved the quality of the network, the geometry has not influenced on the quality and the baseline length has influenced on the quality; however, lengths higher than 20 km has not interrupted the implementation, with GPS L1 receiver, of the local geodetic network for the purpose of georeferencing. Also, the use of different statistical tests, both for the evaluation of the resolution of ambiguities and for the adjustment, have enabled greater clearness in analyzing the results, which allow that unsuitable observations may be eliminated.

Geosynthetic-Reinforced Soil Structure Built to Restore Original Geometry of a 12 m High Slope After Failure Using Local Soil

This paper presents a study case in which a geosynthetic-reinforced soil (GRS) structure was used to rebuild a 12 m high slope after its failure. The failed slope is located between the parking lot of a private company and a public school. Due to surrounding structures restrictions, this project required a solution with rapidity in execution. In addition, as a requirement established by its owner, this structure should recover the original geometry of the slope. Besides the importance regarding surrounding constructions, an interesting aspect of this study case relies on the versatility of geosynthetic materials. A woven geotextile was used as reinforcement. Five other geosynthetic materials were used in this study case. Facing comprised a geocell filled with local soil cover and grass mats, resulting in a green facing. A geonet was used to hold the grass mats in place before grass roots development. Regarding the drainage system, geocomposite drains and geopipes were installed to drain subsurface water. A nonwoven geotextile was used as filter in drainage trenches, which were placed near the structure toe. Additionally to the GRS structure, the lower portion of the slope was reinforced with soil nailing technique. The face of the nailed soil portion was covered with sandbags and shotcrete. It emphasizes the flexibility of GRS structures regarding their application with other technical options in Geotechnical Engineering. The economic aspect of this study case also deserves attention. It did not require soil transportation and other design and construction steps, e.g. concrete structures design and construction.

Undergraduate research in medical education: a descriptive study of students' views

Background: Medical students engage in curricular and extracurricular activities, including undergraduate research (UR). The advantages, difficulties and motivations for medical students pursuing research activities during their studies have rarely been addressed. In Brazil, some medical schools have included undergraduate research into their curriculum. The present study aimed to understand the reality of scientific practice among medical students at a well-established Brazilian medical school, analyzing this context from the students' viewpoint.Methods: A cross-sectional survey based on a questionnaire applied to students from years one to six enrolled in an established Brazilian medical school that currently has no curricular UR program.Results: The questionnaire was answered by 415 students, 47.2% of whom were involved in research activities, with greater participation in UR in the second half of the course. Independent of student involvement in research activities, time constraints were cited as the main obstacle to participation. Among students not involved in UR, 91.1% said they favored its inclusion in the curriculum, since this would facilitate the development of such activity. This approach could signify an approximation between the axes of teaching and research. Among students who had completed at least one UR project, 87.7% said they would recommend the activity to students entering the course.Conclusion: Even without an undergraduate research program, students of this medical school report strong involvement in research activities, but discussion of the difficulties inherent in its practice is important to future developments.

Impact of Quantity of Resin, C-factor, and Geometry on Resin Composite Polymerization Shrinkage Stress in Class V Restorations

Objective: This study evaluated the effect of quantity of resin composite, C-factor, and geometry in Class V restorations on shrinkage stress after bulk fill insertion of resin using two-dimensional finite element analysis.Methods: An image of a buccolingual longitudinal plane in the middle of an upper first premolar and supporting tissues was used for modeling 10 groups: cylindrical cavity, erosion, and abfraction lesions with the same C-factor (1.57), a second cylindrical cavity and abfraction lesion with the same quantity of resin (QR) as the erosion lesion, and then all repeated with a bevel on the occlusal cavosurface angle. The 10 groups were imported into Ansys 13.0 for two-dimensional finite element analysis. The mesh was built with 30,000 triangle and square elements of 0.1 mm in length for all the models. All materials were considered isotropic, homogeneous, elastic, and linear, and the resin composite shrinkage was simulated by thermal analogy. The maximum principal (MPS) and von Mises stresses (VMS) were analyzed for comparing the behavior of the groups.Results: Different values of angles for the cavosurface margin in enamel and dentin were obtained for all groups and the higher the angle, the lower the stress concentration. When the groups with the same C-factor and QR were compared, the erosion shape cavity showed the highest MPS and VMS values, and abfraction shape, the lowest. A cavosurface bevel decreased the stress values on the occlusal margin. The geometry factor overcame the effects of C-factor and QR in some situations.Conclusion: Within the limitations of the current methodology, it is possible to conclude that the combination of all variables studied influences the stress, but the geometry is the most important factor to be considered by the operator.

Cartan geometry of spacetimes with a nonconstant cosmological function Lambda

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Geometry effects on the electronic properties of multi-open dots structures

In this paper we show that the electronic properties of multi-open dots structures are strongly modified by even smalt changes in their geometries. Our discussion of these effects is done in terms of the interaction among localized states (dot-like) and extended states (channel-like), from which a Fano resonance situation arises.

Descriptive study of onychomycosis in a hospital in São Paulo

Onychomychosis, a nail fungus infection is the most frequent nail ailment, constituting about half of all nail disorders. It can be caused by dermatophytes, non-dermatophytes, yeasts and Prothoteca spp. Methods include 5407 samples of patients with suspected onychomycosis, studied from January 2002 to December 2006, by direct mycological examination and fungi culture. The diagnosis of onychomycosis was confirmed in samples from 3822 direct mycological and/or culture positive. The diagnosis was established by culture for fungi. Among the 1.428 identified agents, the dermatophytes were responsible for 68.6% (N = 980) of cases, followed by yeasts with 27.6% (N = 394), non-dermatophytes fungi with 2.2% (N = 31), Prothoteca spp with 0.1% (N = 2), and associations with 1.5% (N = 22). Females were more affected, with 66% (N = 2527) of cases, and the most affected age group ranged from 31 to 60 years of age (median 47 years). Fungal microbiota is often changed in the world, both quantitatively and qualitatively, and is affected by several environmental factors. Thus, the periodic review of the composition of this microbiota is important to evaluate the epidemiology and thus proportion a better therapeutic response.

Finite element analysis of the influence of geometry and design of zirconia crowns on stress distribution

Purpose: To evaluate the influence of the geometry and design of prosthetic crown preparations on stress distribution in compression tests, using finite element analysis (FEA). Materials and Methods: Six combinations of 3D drawings of all-ceramic crowns (yttria-stabilized zirconia framework and porcelain veneer) were evaluated: F, flat preparation and simplified crown; FC, flat preparation and crown with contact point; FCM, flat preparation and modified crown; A, anatomical preparation and simplified anatomical crown framework; AC, anatomical preparation and crown with contact point; and ACM, anatomical preparation and modified crown. Bonded contact types at all interfaces with the mesh were assigned, and the material properties used were according to the literature. A 200 N vertical load was applied at the center of each model. The maximum principal stresses were quantitatively and qualitatively analyzed. Results: The highest values of tensile stress were observed at the interface between the ceramics in the region under the load application for the simplified models (F and A). Reductions in stress values were observed for the model with the anatomical preparation and modified infrastructure (ACM). The stress distribution in the flat models was similar to that of their respective anatomical models. Conclusions: The modified design of the zirconia coping reduces the stress concentration at the interface with the veneer ceramic, and the simplified preparation can exert a stress distribution similar to that of the anatomical preparation at and near the load point, when load is applied to the center of the crown.

Aplicações médicas das abordagens complexas não lineares: a geometria fractal do EEG

Pós-graduação em Saúde Coletiva - FMB

Using Descriptive Feedback In a Sixth Grade Mathematics Classroom

In this action research of my 6th grade math class, I investigated whether or not my students would improve their ability to reflect on their learning process when they received descriptive feedback from a peer. I discovered the process of giving and receiving feedback was challenging for the students to initially learn, but eventually using the feedback was highly beneficial. Descriptive feedback allowed the students to learn and understand their mistakes immediately, which in turn improved their learning. In my action research, I also began to discover more ways to implement descriptive feedback in my instruction so it could be more effectively for the students and efficiently so there would be less time taken out from instruction. As a result of this research, I plan to continue having students provide and receive descriptive feedback and to find more evidence of how descriptive feedback could influence student achievement.

A DESCRIPTIVE ANALYSIS OF THE SEASONAL VARIATION OF PHYSICAL OCEANOGRAPHIC CHARACTERISTICS IN THE NORTHERN REGION OF THE TODOS OS SANTOS BAY (BAHIA, BRAZIL)

The results obtained in the August and December 2003, August 2004 and January 2005 oceanographic campaigns in the northern region of the Todos os Santos Bay (lat. 12 degrees 44.5`S; long. 038 degrees 35.00`W) between the Madre de Deus and Mare islands are analyzed. Instruments of continuous and discrete samplings were used to measure hydrographic properties currents and tides. The water mass of the northern region of the bay is forced by semidiurnal and mesotides of form number 0.08 and the lunar component M(2) height was estimated at 91cm. The time series of the surface currents indicated movements in the N/S direction, forced by the tide with maximum magnitudes of 0.73 m.s(-1) on the December 2003 campaign. However, in August 2004 the currents were dominated by the wind stress forcing, with a maximum speed of 1.85 m.s(-1) and SE direction. Near the bottom, the influence of the tide is not as evident, with a decrease in intensity due to internal and bottom friction, with a maximum velocity of 0.17 m.s(-1). The thermal and haline structures were weakly horizontally, as well as vertically stratified, with extreme values varying in the intervals 23 degrees C (August, 2004) to 28 degrees C (December, 2003) and 31.0 psu (August, 2003) to 36.0 psu (December, 2003), respectively. Some conclusions may be drawn from these results: i) The signs of the dilution of the fresh water discharges of the Caipe, Mataripe and Sao Paulo rivers in the region under the influence of the RLAM were observed only during the winter periods, but in the summer the region was flooded by waters of oceanic origin and the salinities above 36.0 indicated TW mass intrusion; ii) The N-S circulation near the RLAM is strongly dominated by the tide, and the importance of the M(2) component was unequivocal, however, the E-W component presented some tidal modulation away from abrupt bottom topographical changes, and iii) The residual series, calculated as the difference between the original and modeled, is about 1/4 of the original and confirmed its semidiurnal character.

Divertor map with freedom of geometry and safety factor profile

An explicit, area-preserving and integrable magnetic field line map for a single-null divertor tokamak is obtained using a trajectory integration method to represent equilibrium magnetic surfaces. The magnetic surfaces obtained from the map are capable of fitting different geometries with freely specified position of the X-point, by varying free model parameters. The safety factor profile of the map is independent of the geometric parameters and can also be chosen arbitrarily. The divertor integrable map is composed of a nonintegrable map that simulates the effect of external symmetry-breaking resonances, so as to generate a chaotic region near the separatrix passing through the X-point. The composed field line map is used to analyze escape patterns (the connection length distribution and magnetic footprints on the divertor plate) for two equilibrium configurations with different magnetic shear profiles at the plasma edge.

Differential geometry of grassmannians and the Plucker map

Using the Plucker map between grassmannians, we study basic aspects of classic grassmannian geometries. For 'hyperbolic' grassmannian geometries, we prove some facts (for instance, that the Plucker map is a minimal isometric embedding) that were previously known in the 'elliptic' case.

Wing geometry of Anopheles darlingi Root (Diptera: Culicidae) in five major Brazilian ecoregions

We undertook geometric morphometric analysis of wing venation to assess this character's ability to distinguish Anopheles darlingi Root populations and to test the hypothesis that populations from coastal areas of the Brazilian Atlantic Forest differ from those of the interior Atlantic Forest, Cerrado, and the regions South and North of the Amazon River. Results suggest that populations from the coastal and interior Atlantic Forest are more similar to each other than to any of the other regional populations. Notably, the Cerrado population was more similar to that from north of the Amazon River than to that collected of south of the River. thus showing no correlation with geographical distances. We hypothesize that environmental and ecological factors may affect wing evolution in An. darlingi. Although it is premature to associate environmental and ecological determinants with wing features and evolution of the species, investigations on this field are promising. (C) 2012 Elsevier B.V. All rights reserved.