Effect of import time on export patterns

This study examines how the importing process time affects export patterns at an establishment level. We first theoretically discuss the effects of import time on not only exports but also export shipment frequency and exports per shipment. Then, we derive some propositions regarding those effects. Next, by employing highly detailed customs data for Thailand from 2007 to 2011, we empirically investigate those propositions. In this study, the time to import is measured at an establishment level using the difference between the dates on which import shipments arrived in ports and then were released from the container yard. Our main finding is that a longer time reduces total exports, particularly through decreasing export frequency. Significantly negative effects on exports per shipment appear in some specific cases. A longer time to import also reduces total imports, particularly through decreasing import frequency.

Modelos de elementos finitos con aplicación tridimensional de la analogía fluido-fibra, para predecir el comportamiento mecánico de piezas estructurales de madera bajo la presencia de los principales tipos de nudos

Los nudos son los defectos que más disminuyen la resistencia de piezas de madera en la escala estructural, al ocasionar no solo una discontinuidad material, sino también la desviación de las fibras que se encuentran a su alrededor. En la década de los 80 se introdujo la teoría de la analogía fluido-fibra, como un método que aproximaba adecuadamente todas estas desviaciones. Sin embargo en su aplicación tridimensional, nunca se consideraron las diferencias geométricas en el sentido perpendicular al eje longitudinal de las piezas estructurales, lo cual imposibilitaba la simulación numérica de algunos de los principales tipos de nudos, y disminuía la precisión obtenida en aquellos nudos en los que la modelización sí era viable. En este trabajo se propone un modelo programado en lenguaje paramétrico de un software de elementos finitos que, bajo una formulación en tres dimensiones más general, permitirá estudiar de forma automatizada el comportamiento estructural de la madera bajo la influencia de los principales tipos de nudos, a partir de la geometría visible de los mismos y la posición de la médula en la pieza, y el cual ha sido contrastado experimentalmente, simulando de forma muy precisa el comportamiento mecánico de vigas sometidas a ensayos de flexión a cuatro puntos. Knots are the defects that most reduce the strength of lumber at the structural level, by causing not only a material discontinuity but also the deviation of the fibers that surround them. In the 80's it was introduced the theory of the flow-grain analogy as a method to approximating adequately these deviations. However, in three-dimensional applications, geometrical differences in the direction perpendicular to the longitudinal axis of the structural specimens were never considered before, which prevented the numerical simulation of some of the main types of knots, and decreased the achieved precision in those kind of knots where modeling itself was possible. This paper purposes a parametric model programmed in a finite element software, in the way that with a more general three-dimensional formulation, an automated study of the structural behavior of timber under the influence of the main types of knots is allowed by only knowing the visible geometry of such defects, and the position of the pith. Furthermore that has been confirmed experimentally obtaining very accurately simulations of the mechanical behavior of beams under four points bending test.

Estudio de la viabilidad técnica y económica del establecimiento de una terminal de contenedores automatizada en el Mediterráneo español

Esta Tesis analiza, en primer lugar, las posibilidades y condiciones de los puertos españoles de Algeciras, Valencia y Barcelona para acoger en el futuro una terminal totalmente automatizada (robotizada) de contenedores con una capacidad aproximada de 1,3-1,4 millones de contenedores/año o 2 millones de TEU/año. Entre las posibles amenazas y oportunidades que pueden afectar al actual tráfico de esos puertos, la Tesis se centra en el desvío del tráfico de contenedores de transbordo, la sustitución de los tráficos marinos por tráficos ferroviarios, la posibilidad de convertir al Mediterráneo español en la puerta de entrada de productos asiáticos, el cambio de la ruta Asia-Europa a través del Canal de Suez por la ruta Asia-Europa a través del Ártico, la posibilidad de circunvalar África para evitar el Canal de Suez y la próxima apertura de nuevo Canal de Panamá ampliado. La Tesis describe el Estado del Arte de la tecnología para las terminales de contenedores automatizadas que pudiera ser aplicada en nuestro país y desarrolla una terminal automatizada con la capacidad ya mencionada de 2 millones de TEU/año. El tema del ferrocarril en las terminales de contenedores, como futura lanzadera para la proyección de la influencia de los puertos, está desarrollado como una parte esencial de una terminal de contenedores. Se investiga, también, la automatización total o parcial en la transferencia de mercancía buque-ferrocarril La Tesis también desarrolla una metodología para desglosar los costes e ingresos de una terminal automatizada. A través de esos costes e ingresos se va desarrollando, mediante la utilización de hojas Excel relacionadas, el método para mostrar la estructuración de los hitos económicos fundamentales hasta llegar al VAN, TIR y Periodo de Retorno de la Inversión como elementos clave para la calificación de la terminal como proyecto de inversión. La Tesis realiza la misma metodología para la terminal convencional de contenedores más habitual en el Mediterráneo español: la terminal que utiliza sistemas de grúas sobre ruedas (RTG) en el patio de contenedores. Por último, la Tesis establece la comparativa entre los dos tipos de terminales analizadas: la convencional y la automatizada, basándose en el coste de la mano de obra portuaria como elemento clave para dicha comparativa. Se establece la frontera que determina en qué niveles de coste del personal portuario la terminal automatizada es mejor proyecto de inversión que la terminal convencional con RTG. Mediante la creación de la metodología descrita, la Tesis permite: - La comparativa entre diferentes tipos de terminales - La posibilidad de analizar un modelo de terminal variando sus parámetros fundamentales: costes de los estibadores, nuevas tecnologías de manipulación, diferentes rendimientos, variación de los ingresos, etc. - Descubrir el modelo más rentable de una futura terminal mediante la comparación de las diferentes tecnologías que se puedan emplear para la construcción de dicha terminal ABSTRACT This Thesis examines, first, the possibilities and conditions of the Spanish ports of Algeciras, Valencia and Barcelona to host in the future a fully automated container terminal (robotized) with a capacity of approximately 1.3-1.4 million containers/year or 2 million TEU/year. Among the potential threats and opportunities that may affect the current traffic of these ports, the thesis focuses on the diversion of container transhipment traffic, the replacing of marine traffic by rail traffic, the possibility of converting the Spanish Mediterranean in the door input of Asian products, the changing of the Asia-Europe route through the Suez Canal by the Asia-Europe route through the Arctic, the possibility of circumnavigating Africa to avoid the Suez Canal and the upcoming opening of the new expanded Canal of Panama. The Thesis describes the state-of-the-art technology for automated container terminals that could be applied in our country and develops an automated terminal with the listed capacity of 2 million TEUs / year. The use of the railway system in container terminals to be used as future shuttle to the projection of the influence of the ports is developed as an essential part of a container terminal. We also investigate the total or partial automation in transferring goods from ship to rail. The Thesis also develops a methodology to break down the costs and revenues of an automated terminal. Through these costs and revenues is developed, using linked Excel sheets, the method to show the formation of structured key economic milestones until the NPV, IRR and Period of Return of Investment as key to determining the terminal as an investment project. The Thesis takes the same methodology for the conventional container terminal more common in the Spanish Mediterranean: the terminal using rubber tyred cranes (RTG) in the container yard. Finally, the Thesis provides a comparison between the two types of analyzed terminals: conventional and automated, based on the cost of stevedores labor as a key point for that comparison. It establishes the boundary that determines what levels of stevedore costs make automated terminal to be better investment project than a conventional terminal using RTG. By creating the above methodology, the Thesis allows: - The comparison between different types of terminals - The possibility of analyzing a model of terminal varying its key parameters: stevedores costs, new technologies of container handling, different loading/unloading rates, changes in incomes and so on - Unveil the most profitable model for a future terminal by comparing the different technologies that can be employed for the construction of that terminal

Diseño de una hoja Excel para un tanque de almacenamiento de gasóleo de automoción

El presente proyecto, consiste en el diseño básico de una hoja Excel para un tanque de almacenamiento de gasóleo de automoción (gasóleo A). El presente tanque se ha situado en el parque de almacenamiento de Loeches (Comunidad de Madrid). Se han realizado los cálculos necesarios para el diseño de todas las partes de dicho tanque, la envolvente, el fondo de tanque y el techo. Al igual que el cálculo de peso de éste, y un listado de accesorios adicionales necesarios para su puesta en marcha. Se ha desarrollado la programación en Excel, de una ficha para calcular los parámetros principales del tanque diseñado. Se ha llevado a cabo el diseño y fabricación de un tanque de acero, vertical, cilíndrico, de fondo plano, no enterrado, soldados, para el almacenamiento de líquidos a temperatura ambiente. La capacidad del tanque es de un volumen nominal de 25.000 m3 y una altura de 20 metros, se almacenará gasóleo de automoción, con una densidad de 835 kg/m3. Este tipo de gasóleo es el producto derivado del petróleo más consumido en España.This project consists of the basic design of an Excel spreadsheet to a storage tank of diesel fuel (oil A). This tank is located in the storage yard Loeches (Madrid). It have been made the necessary calculations for the design of all parts of the tank, the envelope, the tank bottom and roof. As the weight calculation thereof, and a list of additional accessories required for its implementation and location. It has been developed programming Excel, a record key parameters to calculate tank designed. It has been carried out the design and manufacture of a steel tank, vertical, cylindrical, flat bottom, not buried, soldiers, for storing liquids at room temperature. The tank capacity is of a nominal capacity of 25,000 m3 and a height of 20 meters, diesel fuel is stored, with a density of 835 kg/m3. This type of oil is the oil product most consumed in Spain.

Cambridge Main St. Subway, walls and well found in 1910 while excavating for Harvard Sq. station, blueprint, 1912

Contains blueprint from the Boston Elevated Railway's construction of subway lines underneath Harvard Square. Indicates area of Harvard Yard where construction crews discovered stones likely from the foundation of Goffe College.

Letter from Caleb Gannett to Eliphalet Pearson, 6 December 1804

College steward Caleb Gannett wrote this letter to interim Harvard president Eliphalet Pearson outlining supply and labor needs for an on-time completion of the new college, Stoughton Hall, in Spring 1805. Supplies include lumber for staircases, corners, and doors; lime and hair for masonry; window weights, oil, paint, nails, hinges, and locks. Gannett also requests the services of a workman to complete a coating for the roof.

Address to the Freshmen, 1796 September 30

6-page handwritten copy of an address by Eliphalet Pearson to the freshman class regarding "the misdemeanors & rudeness, of which some of you were the last friday guilty, while sitting in this room, while retiring from it, & immediately after in the College yard."

Notebook of Tristram Gilman, 1757-1761

The small volume holds the notebook of Tristram Gilman interleaved on unlined pages in a printed engagement calendar. The original leather cover accompanies the notebook, but is no longer attached. The inside covers of the original leather binding are filled with scribbled words and notes. The volume holds a variety of handwritten notes including account information, transcriptions of biblical passages and related observations, travel information, community news, weather, and astronomy. The volumes does not follow a chronological order, and instead seems to have been repurposed at various times.

Precedents book of Massachusetts law, 1775

A commonplace book kept by Parsons outling various legal issues including getting a negro with child, slander, deceit, bills of exchange, debt,assault and battery, quantum meruit by a physician, ejectment, covenant, and liberty of the yard. Many of these topics include also forms of declaration.

Mathematical notebook attributed to Thaddeus Mason Harris, ca. 1787

Hardcover notebook containing handwritten transcriptions of rules, cases, and examples from 18th century mathematical texts. The author and purpose of the volume is unclear, though it has been connected with Thaddeus Mason Harris (Harvard AB 1787). Most of the entries include questions and related answers, suggesting the notebook was used as a manuscript textbook and workbook. The extracts appear to be copied from John Dean's " Practical arithmetic" (published in 1756 and 1761), Daniel Fenning's "The young algebraist's companion" (published in multiple editions beginning in 1750), and Martin Clare's "Youth's introduction to trade and business" (extracts first included in 1748 edition).

Gulf of Mexico and Caribbean Sea Region, ca. 1715 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: A map of the West-Indies or the islands of America in the North Sea : with ye adjacent countries, explaning [sic] what belongs to Spain, England, France, Holland &c. also ye trade winds, and ye several tracts made by ye galeons and flota from place to place : according to ye newest and most exact observations, by Herman Moll, geographer. It was printed for Tho. Bowles in St. Pauls Church Yard and John Bowles at the Black Horse in Cornhill ca. 1715. Scale [ca. 1:4,300,000]. Covers the Gulf of Mexico and Caribbean Sea Region including parts of southern United States, Mexico, Central America, West Indies, and northern South America.The image inside the map neatline is georeferenced to the surface of the earth and fit to the North American Lambert Conformal Conic coordinate system. All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as drainage, cities and other human settlements, territorial boundaries, shoreline features, and more. Relief shown pictorially. Includes also historical notes and insets.This layer is part of a selection of digitally scanned and georeferenced historic maps from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of originators, ground condition dates, scales, and map purposes.

Portland, Oregon, 1921 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Industrial map, Portland, Oregon : showing location of port facilities and principal industries with rail connections, compiled and distributed by the Commission of Public Docks. It was published by The Commission of Public Docks in 1921. Scale [ca. 1:21,000]. Covers also a portion of Vancouver, Washington. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Oregon North State Plane NAD 1983 (in Feet) (Fipszone 3601). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This map shows features such as roads, drainage, selected buildings, Commission of Public Docks properties, private shipyards and dry docks, lumber mills, railroads and street car lines, as well as shipyards and railways of Vancouver, Washington. Includes index and inset: Key map, Portland to the sea, showing ship channel, Columbia & Willamette Rivers. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Chinatown, San Francisco, California 1885 (Raster Image)

This layer is a georeferenced raster image of the historic paper map entitled: Official map of Chinatown in San Francisco, prepared under the supervision of the special committee of the board of supervisors, July 1885, W.B. Farwell, John E. Kunkler, E.B. Pond. It was engraved & printed by Bosqui Eng. & Print Co. in 1885. Scale [1:480]. This image consists of images of a two sheet source map that have been stitched together using image editing software to create one image. The image inside the map neatline is georeferenced to the surface of the earth and fit to the California Zone III State Plane Coordinate System NAD83 (in Feet) (Fipszone 0403). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, index maps, legends, or other information associated with the principal map. This cadastral map shows features such as roads, buildings with street addresses and types of businesses, and more. Buildings colored to show: general Chinese occupancy, Chinese gambling houses, Chinese prostitution, Chinese opium resorts, Chinese Joss houses, and White prostitution. This layer is part of a selection of digitally scanned and georeferenced historic maps from The Harvard Map Collection as part of the Imaging the Urban Environment project. Maps selected for this project represent major urban areas and cities of the world, at various time periods. These maps typically portray both natural and manmade features at a large scale. The selection represents a range of regions, originators, ground condition dates, scales, and purposes.

Cambridge, Massachusetts, 1833 (Raster Image)

This layer is a georeferenced raster image of the historic paper manuscript map entitled: Plan of the village in old Cambridge, by Alex. Wadsworth, Boston, Jan. 1833. Scale [ca. 1:1,200]. Manuscript: Pen-and-ink and watercolor on paper. Covers areas surrounding Harvard Square and Harvard Yard, Cambridge, Massachusetts. The image inside the map neatline is georeferenced to the surface of the earth and fit to the Massachusetts State Plane Coordinate System, Mainland Zone (in Feet) (Fipszone 2001). All map collar and inset information is also available as part of the raster image, including any inset maps, profiles, statistical tables, directories, text, illustrations, or other information associated with the principal map. This map shows roads, properties, landowner names, and building footprints. Property owned by Harvard University is outlined in red. This layer is part of a selection of digitally scanned and georeferenced historic maps of Massachusetts from the Harvard Map Collection. These maps typically portray both natural and manmade features. The selection represents a range of regions, originators, ground condition dates (1755-1922), scales, and purposes. The digitized selection includes maps of: the state, Massachusetts counties, town surveys, coastal features, real property, parks, cemeteries, railroads, roads, public works projects, etc.

Analyse de la distribution d'Escherichia coli, utilisée comme un marqueur microbiologique, dans un réseau de production porcin

La présence d’Escherichia coli pathogènes en élevages porcins entraine des retards de croissance et la mortalité. La transmission des E. coli pathogènes entre les élevages et l'abattoir d’un même réseau de production n'est pas bien décrite. La détection des gènes de virulence des E. coli pathogènes pourrait permettre d’identifier un marqueur de contamination dans le réseau. L’objectif de cette étude a été d’identifier un marqueur de contamination E. coli dans un réseau de production porcine défini afin de décrire certains modes de transmission des E. coli pathogènes. Pour ce faire, une région géographique comprenant 10 fermes d’engraissement, un abattoir et un réseau de transport a été sélectionnée. Trois lots de production consécutifs par ferme ont été suivis pendant 12 mois. Des échantillons environnementaux ont été prélevés à l’intérieur et à l’extérieur des fermes (3 visites d’élevage), dans la cour de l’abattoir (2 visites lors de sorties de lot) et sur le camion de transport. La détection des gènes de virulence (eltB, estA, estB, faeG, stxA, stx2A, eae, cnf, papC, iucD, tsh, fedA) dans les échantillons a été réalisée par PCR multiplexe conventionnelle. La distribution temporelle et spatiale des gènes de virulence a permis d’identifier le marqueur de contamination ETEC/F4 défini par la détection d’au moins un gène d’entérotoxine ETEC (estB, estA et eltB) en combinaison avec le gène de l’adhésine fimbriaire (faeG). La distribution des échantillons positifs ETEC/F4 qualifie la cour de l’abattoir comme un réservoir de contamination fréquenté par les transporteurs, vecteurs de contamination entre les élevages. Ceci suggère le lien microbiologique entre l’élevage, les transporteurs et l’abattoir jouant chacun un rôle dans la dissémination des microorganismes pathogènes et potentiellement zoonotiques en production porcine.