Photoelastic stress analysis of splinted and unitary implant-supported prostheses

The aim of this study was to evaluate the effects that splinting and different lengths of implants have on the stress distribution in implant-supported prostheses by photoelastic analysis. A total of five photoelastic resin models were made with different proposed situations, and 400 load applications were performed for the analysis. Compared with the unitary prosthesis, the splinted implant-supported prosthesis acted favorably in the distribution of stresses and strains to the implant (p < 0.001). The increase in length was a significant factor in the stress distribution (p < 0.05) and, ultimately, the overall reduction in stress. It was concluded that the splinted implant-supported prosthesis behaved better biomechanically compared with the unitary prosthesis.

Risk factors for facial melasma in women: a case-control study

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of Beverages and Mouthwashes on the Hardness of Polymers Used in Intraoral Prostheses

PurposeThe mechanical properties of acrylic resins used in intraoral prostheses may be altered by frequent exposure to liquids such as beverages and mouthwashes. This study aimed to evaluate the effect of thermocycling and liquid immersion on the hardness of four brands of acrylic resins commonly used in removable prostheses (Onda Cryl, QC-20, Classico, Lucitone).Materials and MethodsFor each brand of resin, seven specimens were immersed in each of six solutions (coffee, cola, red wine, Plax-Colgate, Listerine [LI], Oral B), and seven more were placed in artificial saliva (control). The hardness was tested using a microhardness tester before and after 5000 thermocycles and after 1, 3, 24, 48, and 96 hours of immersion. The results were analyzed using three-way repeated-measures ANOVA and Tukey's test (p < 0.05).ResultsThe hardness of the resins decreased following thermocycling and immersion in the solutions. Specimens immersed in cola and wine exhibited significant decreases in hardness after immersion for 96 hours, although the greatest significant decrease in hardness occurred in specimens immersed in LI. However, according to American Dental Association specification 12, the Knoop hardness of acrylic resins for intraoral prostheses should not be below 15. Thus, the median values of superficial hardness observed in most of the acrylic resins in this study are considered clinically acceptable.ConclusionsThe microhardness of polymers used for intraoral prostheses decreases following thermocycling. Among specimens immersed in beverages, those immersed in cola or wine experienced the greatest decrease in microhardness. Immersion of acrylic resins in LI significantly decreased the microhardness in relation to the initial value. Among the resins assessed, QC-20 exhibited the lowest initial hardness.

Stress analysis in oral obturator prostheses, part II: photoelastic imaging

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise da evolução de pacientes com paralisia facial periférica submetidos a reabilitação

INTRODUÇÃO: A paralisia facial periférica (PFP) consiste no acometimento do sétimo nervo craniano, de forma aguda, podendo ser precedida por dor na região mastoidiana e resultando em paralisia completa ou parcial da mímica facial. É, na sua grande maioria, de causa idiopática ou apresenta diversas etiologias como diabetes mellitus, hipertensão arterial, herpes zoster, viroses, otites médias, infecções (lepra, sífilis, doença de Lyme), sarcoidose, traumatismo e tumores. Apesar da paralisia facial periférica ter sido descrita em 1821, por Sir Charles Bell, ainda hoje existe muita controvérsia a respeito da etiologia e tratamento. A incidência da PFP encontra-se entre 20 a 30 casos por 100 mil habitantes, com prevalência ligeiramente maior entre as mulheres. Baseado nessas premissas, este estudo teve por objetivo avaliar a evolução de pacientes com paralisia facial periférica submetidos a um protocolo de reabilitação. METODOLOGIA: No estudo foram incluídos 30 pacientes com diagnóstico de paralisia facial periférica idiopática, atendidos no Centro de Estudos e Reabilitação em Fisioterapia (CEAFIR), da FCT-UNESP, campus de Presidente Prudente. O presente estudo adotou como procedimento fisioterapêutico os protocolos I, II, III e IV. Antes de realizar qualquer técnica, abaixo mencionada, foi explicado ao paciente cada passo, para evitar surpreendê-lo. Conforme os pacientes apresentassem melhora e evoluções nas reavaliações elétricas, foram feitas recomendações de exercícios para mímica facial, em frente ao espelho. As repetições eram aumentadas gradativamente, posteriormente os mesmos exercícios, mas agora ativos resistidos. RESULTADOS: Os valores das variáveis reobase, cronaxia e acomodação, nos garantem que o protocolo usado permite avaliar a condução nervosa do facial, o grau de evolução da condução nervosa, bem como acompanhar... (Resumo completo, clicar acesso eletrônico abaixo)

Avaliação da prevalência do tipo de crescimento crânio facial nas diferentes más oclusões, de acordo com a classificação de angle

During the orthodontic correction planning in addition to dental-jaw correction, facial aesthetics is the orthodontist's and patient's major concern. To prevent facial aesthetics damage is really important to take into account the type of craniofacial growth: mesofacial (balanced), dolichofacial (vertical) or brachyfacial (horizontal). We evaluated 152 documentation files from the Department of Orthodontics of Dental University of Sao Jose dos Campos- UNESP in order to analyze what kind of growth occurs in most Class I malocclusions, Class II and Class III Angle of treated individuals from 6 to 12 years old. From the randomly collected samples, 15 of them belonged to Class I Angle malocclusions; 123 belonged to Angle Class II and 14 to Class III malocclusion. The results showed that in Class I, 66.67% were classified as dolicocephalic; in Class II, 64.23% were classified as dolicocephalic and in Class III, 50% were brachycephalic. We conclude that the dolichofacial was the type which ocurred the most, both in females and males and both in malocclusion Class I and Class II. The brachyfacial type most occurred in Class III malocclusion and the mesofacial type occurred in smaller numbers in the three malocclusions studied

Expressão gênica e protéica de receptores de estrogênio β e progesterona no melasma facial de mulheres e na pele sã adjacente

Pós-graduação em Patologia - FMB

Avaliação da adesão de Staphylococcus spp. em resina acrílica específica para prótese ocular e alteração de cor de botões de íris artificiais, variando a cor e as técnicas de obtenção, ambos após desinfecção química

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Tendência de crescimento facial em ortodontia e ortopedia funcional dos maxilares

The knowledge of the facial growth trend is very important in orthodontic treatment. A lateral headfilm is recommended in all young patients undergoing a preorthodontic guidance program to anticipate the best time to begin any mechanical procedures and the possibilities to determine the type of facial growth trend. In type A it will be observed that the middle and lower face are growing forward and downward in unison, with no change in ANB angle. Type B growth trends reveals that growth is downward and forward, with the middle face growing forward more rapidly than the lower and in type C the lower face is growing downward and forward more rapidly than the middle face revealing a decrease in the size of the ANB angle.

Facial type measurements influence on transverse dimensions of normal occlusion arches

Objective – To correlate facial type measurements of Caucasian individuals with transverse dimensions of normal occlusion arches. Methods – Twenty-one pairs of dental models were selected according to the following inclusion criteria: presence of all permanent teeth from 1 st molar to 1 st molar; normal occlusion; no prosthetic crowns; no previous orthodontic treatment and 2 mm or less of crow- dings or spacings. The cephalometric measurements of lateral cephalometric X-ray of the same individuals were taken and tabulat ed. To evaluate the repetition of arch measurements, paired Student’s t-test and Pearson's correlation coefficient were used. The r elationship between the measurements was analysed by using the Pearson’s correlation. Results – The repetition of the measurements showed high correlation and no systematic error. In the comparison between the measurements, a moderate negative correlation was observed b et- ween facial axis angle and the measurements Upper and Lower 6-6, whereas a positive correlation was observed between dentition height and the latter. Conclusion – It was observed a negative correlation between facial axis angle and upper and lower inter-molar distance as well as a positive correlation between dentition height and upper and lower inter-molar distance.

Avaliação cefalométrica das alterações do perfil facial naturais e induzidas pelos aparelhos de Herbst e Bionator no tratamento da má oclusão de classe II, divisão 1ª

The aim of this study was to evaluate the facial profile changes due to natural growth and induced by Herbst appliance and Bionator in the treatment of Class II, division 1 malocclusion. In order to do that, we used a sample of 90 lateral radiographs of 45 individuals in pre-pubertal stage, divided up in two experimental groups and one control. The first group, composed of 15 brazilian individuals, with initial mean age of 9.4 years, was treated with the Herbst appliance for a period of seven months. The second experimental group consisting of 15 brazilian individuals, initial mean age of 9.9 years has gone through bionator therapy for an average period of 21 months. The control group of 15 individuals, who were not treated orthodontically, comes up from the Burlington Growth Centre, University of Toronto, Canada. The intragroup comparison was performed using the Student t test and intergroup comparisons by ANOVA complemented by the Bonferroni test. The results have shown that only the group treated with the Herbst appliance presented significant changes in facial profile with improvement of its convexity and lower lip protrusion.

Tratamiento de la deformidad facial causada por la hiperplasia condilar: relato de caso

The condylar hyperplasia is an acquired development anomaly, rare, characterized by an excessive and progressive growing, affecting neck, condilar head, body and the mandible bough, provoking an important facial asymmetry. In the article we present a case of male patient, 22-years-old, reclaiming of painful sintomatology in the region of temporomandibular joint and severe facial asymmetry. It was instituted an orthodontic-surgical treatment by means of orthognathic combined surgery and high condilectomy. After six years of post-surgical controlling, the patient is now in a good shape, without recurrence of facial asymmetry and condylar hyperplasia.

Treatment of severe facial asymmetry secondary to osteochondroma of the mandibular condyle: case report

Osteochondroma (OC) is the most common benign tumor of long bones. However it is rarely found in the facial skeleton, being the coronoid process and mandibular condyle the most affected sites in this region. It basically consists in bone growth covered by cartilage. The etiology is still controversial: neoplastic, developmental, reparative and traumatic origins have been discussed in literature. The treatments of these lesions include total condylectomy or local resection of the lesion. This paper aims to report a case of a patient with history of trauma and possible fracture of the mandibular condyle in childhood, which in youth developed dentofacial deformity with severe facial asymmetry. The treatment consisted of resection of lesion both with maxillary and mandibular osteotomies associated with graft from the iliac crest bone. Actually, the patient is with a favorable aesthetic, without functional deficit and absence of lesion’s recurrence.

Reabilitação estético-funcional sobre implantes agulhados e endósseos

This report shows the resolution of a case study whose aim was promote the aesthetic and functional rehabilitation of upper left hemi-arch over endosseous and needle implant prostheses. To improve the position of the needle implants, we performed the bucco-palatal bending of needles splinting them with composite resin; we removed the screwed implant prosthesis in the regions of the premolars (24 and 25) and molar (26). The mini-abutments of the last two implants were replaced, and in the first premolar and canine, we used cemented abutments due to implant angulation having planned soldering because of implant size and contact with one needle implant that could interfere with intimate contact bone/implant damaging biomechanics. Pick-up impressions were performed with an open tray, using a retractor cord in the needle implants and respective transfer copings. Therefore, models were related on semi-adjustable articulator after a face-bow recording and interocclusal indexes. After working cast fabrication and try-in of infra-structures, these were adjusted and related into the articulator again. Then, after ceramic build-up, adjustments, finishing, and torque, chemically-activated resin cement was applied on units 21 to 24. At the end of the case, we concluded that a good aesthetic and functional rehabilitation depends on thorough knowledge of techniques for each clinical situation.

Aplicação de sistemas imunológicos artificiais para biometria facial: Reconhecimento de identidade baseado nas características de padrões binários

Pós-graduação em Engenharia Elétrica - FEIS