Data bases for the assessment of medical technologies: examples from Europe.

The assessment of medical technologies has to answer several questions ranging from safety and effectiveness to complex economical, social, and health policy issues. The type of data needed to carry out such evaluation depends on the specific questions to be answered, as well as on the stage of development of a technology. Basically two types of data may be distinguished: (a) general demographic, administrative, or financial data which has been collected not specifically for technology assessment; (b) the data collected with respect either to a specific technology or to a disease or medical problem. On the basis of a pilot inquiry in Europe and bibliographic research, the following categories of type (b) data bases have been identified: registries, clinical data bases, banks of factual and bibliographic knowledge, and expert systems. Examples of each category are discussed briefly. The following aims for further research and practical goals are proposed: criteria for the minimal data set required, improvement to the registries and clinical data banks, and development of an international clearinghouse to enhance information diffusion on both existing data bases and available reports on medical technology assessments.

Estudi de comportaments socials d'aixams robòtics amb aplicació a la neteja d'espais no estructurats

La intel·ligència d’eixams és una branca de la intel·ligència artificial que està agafant molta força en els últims temps, especialment en el camp de la robòtica. En aquest projecte estudiarem el comportament social sorgit de les interaccions entre un nombre determinat de robots autònoms en el camp de la neteja de grans superfícies. Un cop triat un escenari i un robot que s’ajustin als requeriments del projecte, realitzarem una sèrie de simulacions a partir de diferents polítiques de cerca que ens permetran avaluar el comportament dels robots per unes condicions inicials de distribució dels robots i zones a netejar. A partir dels resultats obtinguts serem capaços de determinar quina configuració genera millors resultats.

Research in psychopathology: epistemologic issues.

Etiologic research in psychiatry relies on an objectivist epistemology positing that human cognition is specified by the "reality" of the outer world, which consists of a totality of mind-independent objects. Truth is considered as some sort of correspondence relation between words and external objects, and mind as a mirror of nature. In our view, this epistemology considerably impedes etiologic research. Objectivist epistemology has been recently confronting a growing critique from diverse scientific fields. Alternative models in neurosciences (neuronal selection), artificial intelligence (connectionism), and developmental psychology (developmental biodynamics) converge in viewing living organisms as self-organizing systems. In this perspective, the organism is not specified by the outer world, but enacts its environment by selecting relevant domains of significance that constitute its world. The distinction between mind and body or organism and environment is a matter of observational perspective. These models from empirical sciences are compatible with fundamental tenets of philosophical phenomenology and hermeneutics. They imply consequences for research in psychopathology: symptoms cannot be viewed as disconnected manifestations of discrete localized brain dysfunctions. Psychopathology should therefore focus on how the person's self-coherence is maintained and on the understanding and empirical investigation of the systemic laws that govern neurodevelopment and the organization of human cognition.

Representing diffusion MRI in 5D for segmentation of white matter tracts with a level set method.

We present a method for segmenting white matter tracts from high angular resolution diffusion MR. images by representing the data in a 5 dimensional space of position and orientation. Whereas crossing fiber tracts cannot be separated in 3D position space, they clearly disentangle in 5D position-orientation space. The segmentation is done using a 5D level set method applied to hyper-surfaces evolving in 5D position-orientation space. In this paper we present a methodology for constructing the position-orientation space. We then show how to implement the standard level set method in such a non-Euclidean high dimensional space. The level set theory is basically defined for N-dimensions but there are several practical implementation details to consider, such as mean curvature. Finally, we will show results from a synthetic model and a few preliminary results on real data of a human brain acquired by high angular resolution diffusion MRI.

Estudi i implementació d'un sistema multiagent intel·ligent i la seva aplicació a sistemes difusos

Estudi i implementació d'un sistema multiagent intel·ligent i la seva aplicació a sistemes difusos. Utilització de les llibreries JADE i JFuzzyLogic.

Efficient learning of reactive robot behaviors with a Neural-Q_learning approach

The purpose of this paper is to propose a Neural-Q_learning approach designed for online learning of simple and reactive robot behaviors. In this approach, the Q_function is generalized by a multi-layer neural network allowing the use of continuous states and actions. The algorithm uses a database of the most recent learning samples to accelerate and guarantee the convergence. Each Neural-Q_learning function represents an independent, reactive and adaptive behavior which maps sensorial states to robot control actions. A group of these behaviors constitutes a reactive control scheme designed to fulfill simple missions. The paper centers on the description of the Neural-Q_learning based behaviors showing their performance with an underwater robot in a target following task. Real experiments demonstrate the convergence and stability of the learning system, pointing out its suitability for online robot learning. Advantages and limitations are discussed

A behavior-based scheme using reinforcement learning for autonomous underwater vehicles

This paper presents a hybrid behavior-based scheme using reinforcement learning for high-level control of autonomous underwater vehicles (AUVs). Two main features of the presented approach are hybrid behavior coordination and semi on-line neural-Q_learning (SONQL). Hybrid behavior coordination takes advantages of robustness and modularity in the competitive approach as well as efficient trajectories in the cooperative approach. SONQL, a new continuous approach of the Q_learning algorithm with a multilayer neural network is used to learn behavior state/action mapping online. Experimental results show the feasibility of the presented approach for AUVs

Infohabitants: laboratori per la simulació d’ infohabitants com agents recomanadors (SIRA)

L’ objectiu del projecte és la implementació d’un simulador de sistema de recomanació que permeti estudiar algoritmes de dissociació entre agent-recomanador i usuari, combinant-los amb diverses tècniques de recomanació i fent servir infohabitants com Agents Recomanadors i veure com treballen en un sistema recomanador

Sistemas inteligentes para mundos virtuales

El desarrollo de mundos virtuales inteligentes requiere el conocimiento de áreas tan diversas como la realidad virtual, la inteligencia artificial, la psicología, la sociología y la física. El documento que se desarrolla a continuación recoge las nociones básicas para entender lo que representa dicho desarrollo, el estado del arte de varias de las técnicas y modelos utilizados en algunas de estas áreas y sus posibles aplicaciones, además de una posible solución para su implementación.

Pattern recognition of sleep in rodents using piezoelectric signals generated by gross body movements.

Current research on sleep using experimental animals is limited by the expense and time-consuming nature of traditional EEG/EMG recordings. We present here an alternative, noninvasive approach utilizing piezoelectric films configured as highly sensitive motion detectors. These film strips attached to the floor of the rodent cage produce an electrical output in direct proportion to the distortion of the material. During sleep, movement associated with breathing is the predominant gross body movement and, thus, output from the piezoelectric transducer provided an accurate respiratory trace during sleep. During wake, respiratory movements are masked by other motor activities. An automatic pattern recognition system was developed to identify periods of sleep and wake using the piezoelectric generated signal. Due to the complex and highly variable waveforms that result from subtle postural adjustments in the animals, traditional signal analysis techniques were not sufficient for accurate classification of sleep versus wake. Therefore, a novel pattern recognition algorithm was developed that successfully distinguished sleep from wake in approximately 95% of all epochs. This algorithm may have general utility for a variety of signals in biomedical and engineering applications. This automated system for monitoring sleep is noninvasive, inexpensive, and may be useful for large-scale sleep studies including genetic approaches towards understanding sleep and sleep disorders, and the rapid screening of the efficacy of sleep or wake promoting drugs.

Effective diagnosis of Alzheimer's disease by means of large margin-based methodology.

BACKGROUND Functional brain images such as Single-Photon Emission Computed Tomography (SPECT) and Positron Emission Tomography (PET) have been widely used to guide the clinicians in the Alzheimer's Disease (AD) diagnosis. However, the subjectivity involved in their evaluation has favoured the development of Computer Aided Diagnosis (CAD) Systems. METHODS It is proposed a novel combination of feature extraction techniques to improve the diagnosis of AD. Firstly, Regions of Interest (ROIs) are selected by means of a t-test carried out on 3D Normalised Mean Square Error (NMSE) features restricted to be located within a predefined brain activation mask. In order to address the small sample-size problem, the dimension of the feature space was further reduced by: Large Margin Nearest Neighbours using a rectangular matrix (LMNN-RECT), Principal Component Analysis (PCA) or Partial Least Squares (PLS) (the two latter also analysed with a LMNN transformation). Regarding the classifiers, kernel Support Vector Machines (SVMs) and LMNN using Euclidean, Mahalanobis and Energy-based metrics were compared. RESULTS Several experiments were conducted in order to evaluate the proposed LMNN-based feature extraction algorithms and its benefits as: i) linear transformation of the PLS or PCA reduced data, ii) feature reduction technique, and iii) classifier (with Euclidean, Mahalanobis or Energy-based methodology). The system was evaluated by means of k-fold cross-validation yielding accuracy, sensitivity and specificity values of 92.78%, 91.07% and 95.12% (for SPECT) and 90.67%, 88% and 93.33% (for PET), respectively, when a NMSE-PLS-LMNN feature extraction method was used in combination with a SVM classifier, thus outperforming recently reported baseline methods. CONCLUSIONS All the proposed methods turned out to be a valid solution for the presented problem. One of the advances is the robustness of the LMNN algorithm that not only provides higher separation rate between the classes but it also makes (in combination with NMSE and PLS) this rate variation more stable. In addition, their generalization ability is another advance since several experiments were performed on two image modalities (SPECT and PET).

A multidimensional segmentation evaluation for medical image data.

Evaluation of segmentation methods is a crucial aspect in image processing, especially in the medical imaging field, where small differences between segmented regions in the anatomy can be of paramount importance. Usually, segmentation evaluation is based on a measure that depends on the number of segmented voxels inside and outside of some reference regions that are called gold standards. Although some other measures have been also used, in this work we propose a set of new similarity measures, based on different features, such as the location and intensity values of the misclassified voxels, and the connectivity and the boundaries of the segmented data. Using the multidimensional information provided by these measures, we propose a new evaluation method whose results are visualized applying a Principal Component Analysis of the data, obtaining a simplified graphical method to compare different segmentation results. We have carried out an intensive study using several classic segmentation methods applied to a set of MRI simulated data of the brain with several noise and RF inhomogeneity levels, and also to real data, showing that the new measures proposed here and the results that we have obtained from the multidimensional evaluation, improve the robustness of the evaluation and provides better understanding about the difference between segmentation methods.

Desenvolupament d'un agent intel·ligent dins el marc de la competició TAC SCM

Aquest projecte està emmarcat dins el grup eXiT d’Intel•lig`encia Artificial del Departament d’Electrònica i Automàtica (EIA) de la Universitat de Girona. Pertany a l’àmbit de la Intel•ligència Artificial i, concretament, en l’apartat d’agents intel•ligents. En el nostre cas, tractarem el desenvolupament d’un agent intel•ligent en un entorn determinat, el de la gestió d’una cadena de producció. Amb l’objectiu de proporcionar un marc experimental on provar diferents tecnologies de suport a la gestió de la cadena de producció, la comunitat d’investigadors va proposar una competició internacional: la Trading Agent Competiton (TAC). En aquesta competició existeixen diferents modalitats. En particular, la Swedish Institution of Computer Science (SICS), juntament amb la Carnegie Mellon University de Pittsburg, Minnesotta, van proposar al 2003 un escenari de muntatge de PC’s basat en el proveïment de recursos, l’embalatge de PC’s i les ventes a clients. Aquesta modalitat és coneguda com aTAC-SCM (Supply Chain Management)

A Negotiation Style Recommender Based on Computational Ecology in Open Negotiation Environments

The system described herein represents the first example of a recommender system in digital ecosystems where agents negotiate services on behalf of small companies. The small companies compete not only with price or quality, but with a wider service-by-service composition by subcontracting with other companies. The final result of these offerings depends on negotiations at the scale of millions of small companies. This scale requires new platforms for supporting digital business ecosystems, as well as related services like open-id, trust management, monitors and recommenders. This is done in the Open Negotiation Environment (ONE), which is an open-source platform that allows agents, on behalf of small companies, to negotiate and use the ecosystem services, and enables the development of new agent technologies. The methods and tools of cyber engineering are necessary to build up Open Negotiation Environments that are stable, a basic condition for predictable business and reliable business environments. Aiming to build stable digital business ecosystems by means of improved collective intelligence, we introduce a model of negotiation style dynamics from the point of view of computational ecology. This model inspires an ecosystem monitor as well as a novel negotiation style recommender. The ecosystem monitor provides hints to the negotiation style recommender to achieve greater stability of an open negotiation environment in a digital business ecosystem. The greater stability provides the small companies with higher predictability, and therefore better business results. The negotiation style recommender is implemented with a simulated annealing algorithm at a constant temperature, and its impact is shown by applying it to a real case of an open negotiation environment populated by Italian companies