Geometry effects on the electronic properties of multi-open dots structures

In this paper we show that the electronic properties of multi-open dots structures are strongly modified by even smalt changes in their geometries. Our discussion of these effects is done in terms of the interaction among localized states (dot-like) and extended states (channel-like), from which a Fano resonance situation arises.

Descriptive study of onychomycosis in a hospital in São Paulo

Onychomychosis, a nail fungus infection is the most frequent nail ailment, constituting about half of all nail disorders. It can be caused by dermatophytes, non-dermatophytes, yeasts and Prothoteca spp. Methods include 5407 samples of patients with suspected onychomycosis, studied from January 2002 to December 2006, by direct mycological examination and fungi culture. The diagnosis of onychomycosis was confirmed in samples from 3822 direct mycological and/or culture positive. The diagnosis was established by culture for fungi. Among the 1.428 identified agents, the dermatophytes were responsible for 68.6% (N = 980) of cases, followed by yeasts with 27.6% (N = 394), non-dermatophytes fungi with 2.2% (N = 31), Prothoteca spp with 0.1% (N = 2), and associations with 1.5% (N = 22). Females were more affected, with 66% (N = 2527) of cases, and the most affected age group ranged from 31 to 60 years of age (median 47 years). Fungal microbiota is often changed in the world, both quantitatively and qualitatively, and is affected by several environmental factors. Thus, the periodic review of the composition of this microbiota is important to evaluate the epidemiology and thus proportion a better therapeutic response.

Finite element analysis of the influence of geometry and design of zirconia crowns on stress distribution

Purpose: To evaluate the influence of the geometry and design of prosthetic crown preparations on stress distribution in compression tests, using finite element analysis (FEA). Materials and Methods: Six combinations of 3D drawings of all-ceramic crowns (yttria-stabilized zirconia framework and porcelain veneer) were evaluated: F, flat preparation and simplified crown; FC, flat preparation and crown with contact point; FCM, flat preparation and modified crown; A, anatomical preparation and simplified anatomical crown framework; AC, anatomical preparation and crown with contact point; and ACM, anatomical preparation and modified crown. Bonded contact types at all interfaces with the mesh were assigned, and the material properties used were according to the literature. A 200 N vertical load was applied at the center of each model. The maximum principal stresses were quantitatively and qualitatively analyzed. Results: The highest values of tensile stress were observed at the interface between the ceramics in the region under the load application for the simplified models (F and A). Reductions in stress values were observed for the model with the anatomical preparation and modified infrastructure (ACM). The stress distribution in the flat models was similar to that of their respective anatomical models. Conclusions: The modified design of the zirconia coping reduces the stress concentration at the interface with the veneer ceramic, and the simplified preparation can exert a stress distribution similar to that of the anatomical preparation at and near the load point, when load is applied to the center of the crown.

Aplicações médicas das abordagens complexas não lineares: a geometria fractal do EEG

Pós-graduação em Saúde Coletiva - FMB

Using Descriptive Feedback In a Sixth Grade Mathematics Classroom

In this action research of my 6th grade math class, I investigated whether or not my students would improve their ability to reflect on their learning process when they received descriptive feedback from a peer. I discovered the process of giving and receiving feedback was challenging for the students to initially learn, but eventually using the feedback was highly beneficial. Descriptive feedback allowed the students to learn and understand their mistakes immediately, which in turn improved their learning. In my action research, I also began to discover more ways to implement descriptive feedback in my instruction so it could be more effectively for the students and efficiently so there would be less time taken out from instruction. As a result of this research, I plan to continue having students provide and receive descriptive feedback and to find more evidence of how descriptive feedback could influence student achievement.

A DESCRIPTIVE ANALYSIS OF THE SEASONAL VARIATION OF PHYSICAL OCEANOGRAPHIC CHARACTERISTICS IN THE NORTHERN REGION OF THE TODOS OS SANTOS BAY (BAHIA, BRAZIL)

The results obtained in the August and December 2003, August 2004 and January 2005 oceanographic campaigns in the northern region of the Todos os Santos Bay (lat. 12 degrees 44.5`S; long. 038 degrees 35.00`W) between the Madre de Deus and Mare islands are analyzed. Instruments of continuous and discrete samplings were used to measure hydrographic properties currents and tides. The water mass of the northern region of the bay is forced by semidiurnal and mesotides of form number 0.08 and the lunar component M(2) height was estimated at 91cm. The time series of the surface currents indicated movements in the N/S direction, forced by the tide with maximum magnitudes of 0.73 m.s(-1) on the December 2003 campaign. However, in August 2004 the currents were dominated by the wind stress forcing, with a maximum speed of 1.85 m.s(-1) and SE direction. Near the bottom, the influence of the tide is not as evident, with a decrease in intensity due to internal and bottom friction, with a maximum velocity of 0.17 m.s(-1). The thermal and haline structures were weakly horizontally, as well as vertically stratified, with extreme values varying in the intervals 23 degrees C (August, 2004) to 28 degrees C (December, 2003) and 31.0 psu (August, 2003) to 36.0 psu (December, 2003), respectively. Some conclusions may be drawn from these results: i) The signs of the dilution of the fresh water discharges of the Caipe, Mataripe and Sao Paulo rivers in the region under the influence of the RLAM were observed only during the winter periods, but in the summer the region was flooded by waters of oceanic origin and the salinities above 36.0 indicated TW mass intrusion; ii) The N-S circulation near the RLAM is strongly dominated by the tide, and the importance of the M(2) component was unequivocal, however, the E-W component presented some tidal modulation away from abrupt bottom topographical changes, and iii) The residual series, calculated as the difference between the original and modeled, is about 1/4 of the original and confirmed its semidiurnal character.

Divertor map with freedom of geometry and safety factor profile

An explicit, area-preserving and integrable magnetic field line map for a single-null divertor tokamak is obtained using a trajectory integration method to represent equilibrium magnetic surfaces. The magnetic surfaces obtained from the map are capable of fitting different geometries with freely specified position of the X-point, by varying free model parameters. The safety factor profile of the map is independent of the geometric parameters and can also be chosen arbitrarily. The divertor integrable map is composed of a nonintegrable map that simulates the effect of external symmetry-breaking resonances, so as to generate a chaotic region near the separatrix passing through the X-point. The composed field line map is used to analyze escape patterns (the connection length distribution and magnetic footprints on the divertor plate) for two equilibrium configurations with different magnetic shear profiles at the plasma edge.

Differential geometry of grassmannians and the Plucker map

Using the Plucker map between grassmannians, we study basic aspects of classic grassmannian geometries. For 'hyperbolic' grassmannian geometries, we prove some facts (for instance, that the Plucker map is a minimal isometric embedding) that were previously known in the 'elliptic' case.

Wing geometry of Anopheles darlingi Root (Diptera: Culicidae) in five major Brazilian ecoregions

We undertook geometric morphometric analysis of wing venation to assess this character's ability to distinguish Anopheles darlingi Root populations and to test the hypothesis that populations from coastal areas of the Brazilian Atlantic Forest differ from those of the interior Atlantic Forest, Cerrado, and the regions South and North of the Amazon River. Results suggest that populations from the coastal and interior Atlantic Forest are more similar to each other than to any of the other regional populations. Notably, the Cerrado population was more similar to that from north of the Amazon River than to that collected of south of the River. thus showing no correlation with geographical distances. We hypothesize that environmental and ecological factors may affect wing evolution in An. darlingi. Although it is premature to associate environmental and ecological determinants with wing features and evolution of the species, investigations on this field are promising. (C) 2012 Elsevier B.V. All rights reserved.

Comparison of wing geometry data and genetic data for assessing the population structure of Aedes aegypti

Aedes aegypti is the most important vector of dengue viruses in tropical and subtropical regions. Because vaccines are still under development, dengue prevention depends primarily on vector control. Population genetics is a common approach in research involving Ae. aegypti. In the context of medical entomology, wing morphometric analysis has been proposed as a strong and low-cost complementary tool for investigating population structure. Therefore, we comparatively evaluated the genetic and phenotypic variability of population samples of Ae. aegypti from four sampling sites in the metropolitan area of Sao Paulo city, Brazil. The distances between the sites ranged from 7.1 to 50 km. This area, where knowledge on the population genetics of this mosquito is incipient, was chosen due to the thousands of dengue cases registered yearly. The analysed loci were polymorphic, and they revealed population structure (global F-ST = 0.062; p < 0.05) and low levels of gene flow (Nm = 0.47) between the four locations. Principal component and discriminant analyses of wing shape variables (18 landmarks) demonstrated that wing polymorphisms were only slightly more common between populations than within populations. Whereas microsatellites allowed for geographic differentiation, wing geometry failed to distinguish the samples. These data suggest that microevolution in this species may affect genetic and morphological characters to different degrees. In this case, wing shape was not validated as a marker for assessing population structure. According to the interpretation of a previous report, the wing shape of Ae. aegypti does not vary significantly because it is stabilised by selective pressure. (C) 2011 Elsevier B.V. All rights reserved.

Spiritual support for people living with HIV/AIDS: A Brazilian explorative, descriptive study

y In this exploratory and descriptive research, we identified the meaning of religion and spirituality in the experience of patients at a public health service for treatment of HIV/AIDS in a Brazilian upcountry town. Eight participants were selected through theoretical sampling. Data were collected through semistructured interviews, and analyzed by means of qualitative content analysis. The emerging themes were religion: a path to support, and God is everything. Religion, as a path that leads patients to different sources of support, included exploration of different churches, acknowledgment of guilt, and finding strength to cope with the disease, rationalization of the disease process, meeting other churchgoers, and finding God and faith. God, an important source of support, was present in prayers, in the belief in healing through faith, and in the feeling of comfort and relief. Because spirituality and religion were seen as important sources of support, in this study we that health professionals include these aspects in care planning.

A critical and descriptive approach to interictal behavior with the Neurobehavior Inventory (NBI)

Purpose: The purpose of this study was to test the psychometric properties of the Neurobehavior Inventory (NBI) in a group of temporal lobe epilepsy (TLE) patients from a tertiary care center, correlating its scores with the presence of psychiatric symptoms. Methods: Clinical and sociodemographic data from ninety-six TLE outpatients were collected, and a neuropsychiatric evaluation was performed with the following instruments: Mini-Mental State Examination (MMSE), structured psychiatric interview (MINI-PLUS), Neurobehavior Inventory (NBI), and Hamilton Depression Rating Scale (HAM-D). Results: Some traits evaluated by the NBI showed adequate internal consistency (mean inter-item correlation between 0.2 and 0.4) and were frequent, such as religiosity (74%) and repetitiveness (60.4%). Principal component analysis showed three factors, named here as emotions (Factor 1), hyposexuality (Factor 2), and unusual ideas (Factor 3). Depressive symptoms on HAM-D showed a strong association with emotions and hyposexuality factors. When patients with left TLE and right TLE were compared, the former exhibited more sadness (p=0.017), and the latter, a greater tendency toward sense of personal destiny (p=0.028). Conclusion: Depression influences NBI scoring, mainly emotionality and hyposexuality traits. Neurobehavior Inventory subscales can be better interpreted with an appropriate evaluation of comorbid mood and anxiety disorders. Compromise in left temporal mesial structures is associated with increased tendency toward sad affect, whereas right temporal pathology is associated with increased beliefs in personal destiny. (C) 2012 Elsevier Inc. All rights reserved.

Effect of sample pre-cracking method and notch geometry in plane strain fracture toughness tests as applied to a PMMA resin

The influence of test method factors (notch shape, square or angular, and pre-cracking method, by tapping onto or pressing a razor blade) on the results obtained in plane strain fracture toughness test according to standard ASTM D5045 using SENB specimens made of a commercial PMMA resin were investigated. Results were analyzed quantitatively by comparing the obtained K-IC values and qualitatively by observing their effect on the Moire fringes observed using photoelasticity, showing that, at 95% significance level, the K-IC values are affected by the pre-cracking method, with the most conservative value being obtained when natural pre-cracks were introduced by tapping onto a razor blade (K-IC = 1.15 +/- 0.11 MPa.m(0.5)). This correlates with a perturbation in the stress field close to the pre-crack tip observed in the photoelasticity test sample when it was introduced by pressing the razor blade. Surprisingly, notch geometry only slightly affects the results. (C) 2012 Elsevier Ltd. All rights reserved.

Structuring depressive discourse: A descriptive narrative process

This study aimed to evaluate the importance of a descriptive narrative process of the significance involved in a depressive phenomenon. The research population consisted of 324 adult and adolescent patients of both genders, located in the central area of the city of Paraiba, for clinical and psychological health care. For surveyed patients, suffering and or psychological pain were the most common complaints. A sample of 159 patients was taken, including male and female adolescents and adults. Data were collected through a narrative interview. Shutz' procedure was used for information analysis. The obtained data offered the opportunity to review concepts, discuss life history and listen to narrative positioning episodes of manifested depression. The narratives were considered to be a determinant factor to consider inherent conflicts.

Mapping the hydrodynamic response to the initial geometry in heavy-ion collisions

We investigate how the initial geometry of a heavy-ion collision is transformed into final flow observables by solving event-by-event ideal hydrodynamics with realistic fluctuating initial conditions. We study quantitatively to what extent anisotropic flow (nu(n)) is determined by the initial eccentricity epsilon(n) for a set of realistic simulations, and we discuss which definition of epsilon(n) gives the best estimator of nu(n). We find that the common practice of using an r(2) weight in the definition of epsilon(n) in general results in a poorer predictor of nu(n) than when using r(n) weight, for n > 2. We similarly study the importance of additional properties of the initial state. For example, we show that in order to correctly predict nu(4) and nu(5) for noncentral collisions, one must take into account nonlinear terms proportional to epsilon(2)(2) and epsilon(2)epsilon(3), respectively. We find that it makes no difference whether one calculates the eccentricities over a range of rapidity or in a single slice at z = 0, nor is it important whether one uses an energy or entropy density weight. This knowledge will be important for making a more direct link between experimental observables and hydrodynamic initial conditions, the latter being poorly constrained at present.