A Ortodontia e aparelhos intra orais no tratamento da SAHOS (Sindrome da Apneia e Hipopneia Obstrutiva do Sono)

A síndrome da apneia e hipopneia obstrutiva do sono (SAHOS) é uma patologia que atinge cerca de 4% da população adulta, é uma doença crónica, progressiva, com alta morbilidade e mortalidade. A apneia do sono e o ronco têm despertado a atenção da área da saúde devido às inúmeras comorbilidades associadas. Esta síndrome é caracterizada por obstrução parcial ou total das vias aéreas superiores durante o sono e manifesta-se como uma redução (hipopneia) ou cessação (apneia) do fluxo aéreo. A queixa habitual dos pacientes além dos problemas sociais como ronco e a hipersonolência diurna, são a preocupação com outros quadros que esta patologia pode desencadear, como insuficiência cardíaca e hipertensão pulmonar. O tratamento da apneia obstrutiva do sono é multidisciplinar e indispensável, podendo ser realizado de diversas formas, tanto conservadoras como cirúrgicas, dependendo de inúmeros fatores como a gravidade da doença, as alterações anatómicas das vias aéreas superiores, idade e condições sistémicas do paciente. Os aparelhos intra orais têm sido usados durante anos, no tratamento da SAHOS como controle da obstrução das vias aéreas superiores. A terapia com aparelhos intraorais é simples e reversível. O sucesso do tratamento com aparelhos intra orais para o ronco e SAHOS leve e moderada é comprovado pela grande maioria dos estudos. A facilidade de uso, manutenção e conforto quando comparados a outros tratamentos faz com que os aparelhos intrabucais sejam considerados de fácil aceitação pelos pacientes. Através de uma revisão de literatura discutiu-se o uso de aparelhos intrabucais para o tratamento dessa patologia, destacando a eficácia e as limitações dessa terapia, os principais sintomas clínicos, os principais efeitos colaterais oclusais, o grau de colaboração e o índice de satisfação dos pacientes. Foi possível concluir que aparelhos intrabucais de avanço mandibular estão amplamente indicados para o tratamento do ronco e da SAHOS como terapia principal, ou alternativa naqueles pacientes que não podem suportar a terapia da pressão positiva das vias aéreas e que para o sucesso do tratamento é fundamental uma equipe multidisciplinar, incluindo um Médico Dentista e a colaboração do paciente.

Évaluation objective de la séquence de récupération des fibres sensitives de la troisième division du nerf trijumeau suite à une ostéotomie sagittale mandibulaire bilatérale (OSMB)

Le projet de recherche est une étude prospective consistant à déterminer la séquence de récupération des fibres sensitives de la troisième division du nerf trijumeau (V3) suite à une ostéotomie sagittale mandibulaire bilatérale (OSMB). Dix-neuf sujets ont été recrutés entre les mois de mars et septembre 2008. Tous ont eu une chirurgie orthognathique d’OSMB afin de corriger une malocclusion. La sensibilité dans le territoire cutané innervé par V3 de chacun des sujets a été évaluée en pré-opératoire de même qu’à cinq autres reprises en post-opératoire (2, 4, 20, 36 et 52 semaines). Deux méthodes d’évaluation objectives de la récupération nerveuse sensitive ont été utilisées. La première consistait à utiliser un appareil nommé Neurometer afin de déterminer l’intensité minimale de courant électrique (Current Perception Threshold [CPT]) pouvant être ressentie spécifiquement par chacun des trois types de fibres nerveuses sensitives (A-Bêta, A-Delta et C) dans le territoire cutané de V3. La deuxième méthode consistait à utiliser les monofilaments de Semmes-Weinstein afin de déterminer le seuil minimal de pression (Von Frey) pouvant être ressenti dans le même territoire cutané. De plus, lors de chacun des rendez-vous post-opératoires, il a été demandé à chaque sujet de quantifier subjectivement sa sensibilité à l’aide d’une échelle visuelle analogue. Cela a permis de corréler les valeurs de CPT, les seuils de perception de la pression et l’évaluation subjective que le patient a de sa propre sensibilité. Il a été démontré que la séquence de récupération des fibres sensitives de V3 suite à une OSMB est la suivante : les fibres A-Delta récupèrent en premier, suivies des fibres C puis des fibres A-Bêta.

Tratamento da classe II divisão 1 na dentição mista

Introdução: Os indivíduos portadores da má oclusão de Classe II Divisão 1 possuem diversas etiologias e podem ser encontrados em todas as etnias. As suas características clínicas e radiográficas se agravam com o crescimento e uma vez não tratada, continuam com esta má oclusão por toda sua vida. Para o tratamento ortodôntico na dentição mista recorre-se a dispositivos como aparelhos extra-orais, aparelhos funcionais fixos e removíveis. Objetivo: O objetivo deste trabalho é fazer uma revisão sobre o diagnóstico e tratamento da Classe II Divisão 1 na dentição mista, salientando a importância do tratamento nesta fase. Materiais e Métodos: Para a concretização do presente trabalho foi realizada uma revisão bibliográfica no presente ano, recorrendo-se ao livro “Ortodontia Contemporânea” do autor William Proffit, diversos motores de busca online, nomeadamente, PubMed, Medline, Elsevier e Scholar Google, utilizando como palavras-chave: “Class II Division 1”, “Mixed Dentition”, “Functional Appliance”, “Extra-Oral Appliance”, e revistas de Ortodontia, nomeadamente, American Journal of Orthodontics, Seminars in Orthodontics, The Angle Orthodontist e Dental Press de Ortodontia e Ortopedia Facial. A pesquisa foi realizada sem qualquer tipo de limites temporais, sendo dada uma maior importância a artigos mais recentes. Os artigos foram selecionados segundo o seu rigor científico e interesse para o tema. Numa fase mais avançada de revisão bibliográfica foram usados artigos citados na bibliografia dos artigos selecionados na primeira pesquisa efetuada. Conclusão: A dentição mista é considerada a fase ideal para iniciar o diagnóstico, prevenção, interceção e possível correção dos problemas dentários e/ou esqueléticos associados a uma Classe II Divisão 1. A Ortopedia Funcional dos Maxilares, removível ou fixa, e o uso de aparelhos extra-orais constituem recursos terapêuticos disponíveis para o tratamento desta má oclusão.

Ancoragem na movimentação ortodôntica

Uma ancoragem eficiente é um factor de extrema importância em Ortodontia. Perante a relevância deste assunto e sendo ainda um desafio para muitos ortodontistas, este trabalho tem como objetivo realizar uma revisão bibliográfica sobre dispositivos de ancoragem, especificamente mini-implantes e mini-placas, entendendo que os mesmos surgiram como auxiliares importantes no tratamento ortodôntico, com a finalidade de relacionar os tipos, indicações, aplicações clínicas, locais de instalação, vantagens, possíveis complicações na sua utilização e cuidados a serem tomados. Alta versatilidade de aplicação clínica, eliminação de movimentos indesejáveis dos dentes pilares, movimentos precisos, movimentos mais rápidos, redução de custos, processo cirúrgico simples e pouco invasivo, substituição de aparelhos extraorais, tamanho reduzido e capacidade de suportar de imediato forças ortodônticas pesadas, são algumas das vantagens na utilização dos mini-implantes e mini-placas que fazem com que a ancoragem óssea absoluta obtida através do seu uso crie melhores condições na obtenção dos objetivos propostos no tratamento ortodôntico com aparatologia fixa.

O estado como empregador de última instância: uma proposta de pleno emprego, estabilidade e condições dignas de trabalho para o Brasil

GOMES, Z. B. ; LOURENÇO, André Luís Cabral de . Atuação do Estado como empregador de última Instância: uma proposta para eliminar o desemprego estrutural do Brasil. In: Encontro Nacional de Economia Política, 13. 2008, João Pessoa/PB. Anais... João Pessoa: ENEP, 2008.

A CSR and communication strategy for Worten

Field lab in marketing

Removable orthodontic appliances: frequency and cleaning agents used by students and recommended by dentists

Aim: To evaluate the prevalence and hygiene habits of 13-19 years-old adolescent users of removable orthodontic appliances (ROA) and to determine hygiene methods for the appliances prescribed by dentists, in the city of Pelotas. Methods: The study had two stages. The first stage was a telephone interview with dentists. Dentists were interview by telephone calls in order to obtain information regarding the hygiene methods for cleaning acrylic appliances. Second stage was a cross-sectional study performed with schoolchildren. Children from public and private schools with secondary level were included in the sample. A questionnaire was applied to the students using any type of ROA. Questionnaires included demographic information and behavioral characteristics. Data collected were subjected to Chi-square test and logistic regression. Results: The prevalence of children using ROA was 5.4%. Students (89.7%) and dentists (47.2%) reported to prefer mechanical methods to clean their ROA. Cleaning with soup, hydrogen peroxide or effervescent tabs were less used. High frequency of use was associated with higher frequency of hygiene on the ROA. Conclusions: The prevalence of schoolchildren using removable appliances was low. The common cleaning method used by children and prescribed by dentists was mechanical. Hygiene frequency was significantly associated with the routine of use of the appliance and with the type of hygiene method.

Motivating the use of public transit through a mobile glanceable display

With increasing concerns about the impact of global warming on human life, policy makers around the world and researchers have sought for technological solutions that have the potential to attenuate this process. This thesis describes the design and evaluation of an information appliance that aims to increase the use of public transportation. We developed a mobile glanceable display that, being aware of the user’s transportation routines, provides awareness cues about bus arrival time, grounded upon the vision of Ambient Intelligence. We present the design process we followed, from ideation to building a prototype and conducting a field study, and conclude with a set of guidelines for the design of relevant personal information systems. More specifically we seek to test the following hypotheses: 1) That the tangible prototype that provides ambient cues will be used more frequently than a similar purpose mobile app, 2) That the tangible prototype will reduce the waiting time at the bus stop, 3) That the tangible prototype will result to reduced anxiety on passengers, 4) That the tangible prototype will result to an increase in the perceived reliability of the transit service, 5) That the tangible prototype will enhance users’ efficiency in reading the bus schedules and 6) That the tangible prototype will make individuals more likely to use public transit. In a field study, we compare the tangible prototype against the mobile app and a control condition where participants were given no external support in obtaining bus arrival information, other than their existing routines. Using qualitative and quantitative data, we test the aforementioned hypotheses and explore users’ reactions to the prototype we developed.

Adhesives for fixed orthodontic bands

Background: Orthodontic treatment involves using fixed or removable appliances (dental braces) to correct the positions of teeth. It has been shown that the quality of treatment result obtained with fixed appliances is much better than with removable appliances. Fixed appliances are, therefore, favoured by most orthodontists for treatment. The success of a fixed orthodontic appliance depends on the metal attachments (brackets and bands) being attached securely to the teeth so that they do not become loose during treatment. Brackets are usually attached to the front and side teeth, whereas bands (metal rings that go round the teeth) are more commonly used on the back teeth (molars). A number of adhesives are available to attach bands to teeth and it is important to understand which group of adhesives bond most reliably, as well as reducing or preventing dental decay during the treatment period. :Objectives: To evaluate the effectiveness of the adhesives used to attach bands to teeth during fixed appliance treatment, in terms of: (1) how often the bands come off during treatment; and (2) whether they protect the banded teeth against decay during fixed appliance treatment. Search methods: The following electronic databases were searched: Cochrane Oral Health's Trials Register (searched 2 June 2016), Cochrane Central Register of Controlled Trials (CENTRAL; 2016, Issue 5) in the Cochrane Library (searched 2 June 2016), MEDLINE Ovid (1946 to 2 June 2016) and EMBASE Ovid (1980 to 2 June 2016). We searched ClinicalTrials.gov and the World Health Organization International Clinical Trials Registry Platform for ongoing trials. No restrictions were placed on the language or date of publication when searching the electronic databases. Selection criteria: Randomised and controlled clinical trials (RCTs and CCTs) (including split-mouth studies) of adhesives used to attach orthodontic bands to molar teeth were selected. Patients with full arch fixed orthodontic appliance(s) who had bands attached to molars were included. Data collection and analysis: All review authors were involved in study selection, validity assessment and data extraction without blinding to the authors, adhesives used or results obtained. All disagreements were resolved by discussion. Main results: Five RCTs and three CCTs were identified as meeting the review's inclusion criteria. All the included trials were of split-mouth design. Four trials compared chemically cured zinc phosphate and chemically cured glass ionomer; three trials compared chemically cured glass ionomer cement with light cured compomer; one trial compared chemically cured glass ionomer with a chemically cured glass phosphonate. Data analysis was often inappropriate within the studies meeting the inclusion criteria. Authors' conclusions: There is insufficient high quality evidence with regard to the most effective adhesive for attaching orthodontic bands to molar teeth. Further RCTs are required.

Motivating the use of public transit through a mobile glanceable display

With increasing concerns about the impact of global warming on human life, policy makers around the world and researchers have sought for technological solutions that have the potential to attenuate this process. This thesis describes the design and evaluation of an information appliance that aims to increase the use of public transportation. We developed a mobile glanceable display that, being aware of the user’s transportation routines, provides awareness cues about bus arrival time, grounded upon the vision of Ambient Intelligence. We present the design process we followed, from ideation to building a prototype and conducting a field study, and conclude with a set of guidelines for the design of relevant personal information systems. More specifically we seek to test the following hypotheses: 1) That the tangible prototype that provides ambient cues will be used more frequently than a similar purpose mobile app, 2) That the tangible prototype will reduce the waiting time at the bus stop, 3) That the tangible prototype will result to reduced anxiety on passengers, 4) That the tangible prototype will result to an increase in the perceived reliability of the transit service, 5) That the tangible prototype will enhance users’ efficiency in reading the bus schedules and 6) That the tangible prototype will make individuals more likely to use public transit. In a field study, we compare the tangible prototype against the mobile app and a control condition where participants were given no external support in obtaining bus arrival information, other than their existing routines. Using qualitative and quantitative data, we test the aforementioned hypotheses and explore users’ reactions to the prototype we developed.

Load Profile Analysis Tool for Electrical Appliances in Households

This paper presents a methodology to forecast the hourly and daily consumption in households. The methodology was validated for households in Lisbon region, Portugal. The paper shows that the forecast tool allows obtaining satisfactory results for forecasting. Models of demand response allow the support of consumer’s decision in exchange for an economic benefit by the redefinition of load profile or changing the appliance consumption period. It is also in the interest of electric utilities to take advantage of these changes, particularly when consumers have an action on the demand-side management or production. Producers need to understand the load profile of households that are connected to a smart grid, to promote a better use of energy, as well as optimize the use of micro-generation from renewable sources, not only to delivering to the network but also in self-consumption.

Follicular wave synchronization on in vivo embryo production in Santa Ines sheep.

This study aimed to evaluate two hormonal protocols for synchronization of follicular wave emergence on in vivo embryo production in Santa Ines sheep under tropical conditions. The greater PRCL rate in GT probably contributed to the smaller number of viable embryos. Thus, it is suggested the appliance indicated the GEm protocol for in vivo embryo production in Santa Ines sheep under tropical conditions.