Qualidade de vida de mulheres com baixa massa óssea na pós-menopausa

OBJETIVO: avaliar a qualidade de vida de pacientes com osteoporose e osteopenia, acompanhadas em ambulatórios especializados em osteoporose e climatério, comparando-as com pacientes com densidade mineral óssea (DMO) normal. MÉTODOS: estudo de série de casos transversal, observacional, que se propôs a analisar, por meio do questionário Medical Outcomes Study 36 Short-Form Health Survey (SF-36), a qualidade de vida de mulheres com osteopenia e osteoporose. Foram avaliadas 124 mulheres na pós-menopausa divididas em três grupos: 55 pacientes com diagnóstico densitométrico de osteoporose, 35 com o de osteopenia e 34 que apresentavam DMO normal. Os três grupos foram comparados com relação aos dados demográficos, características clínicas e de estilo de vida e aos diferentes domínios do SF-36. RESULTADOS: as pacientes dos grupos osteopenia e DMO normal apresentaram menor idade média (56,7±7,1 e 52,9±5,4 anos), maior índice de massa corpórea (IMC) (28,6±3,7 e 30,9±5,1 kg/m²) e menor tempo de menopausa (8,4±5,9 e 5,8±4,5 anos) quando comparadas ao grupo osteoporose (61,8±10,1 anos, IMC de 25,7±5,3 kg/m², 15,5±7,5 anos, respectivamente; p<0,05). de acordo com o SF-36, não houve diferença significativa entre os grupos com relação aos domínios, à exceção do domínio vitalidade, que se mostrou superior no grupo osteoporose. Com relação à impressão pessoal sobre seu estado de saúde, das pacientes que o consideraram bom, um maior percentual pertencia ao grupo osteoporose, e entre aquelas que o consideraram ruim, um percentual menor pertencia ao grupo osteopenia. CONCLUSÃO: a qualidade de vida foi similar em mulheres com osteoporose e osteopenia, em relação às com DMO normal, à exceção do domínio vitalidade, que foi superior, paradoxalmente, nas pacientes com osteoporose.

Evaluation of N-acetilglucosaminidase and myeloperoxidase activity in patients with endometriosis-related infertility undergoing intracytoplasmic sperm injection

Aim: Inflammation is as an important factor in ovulation with the active participation of leucocytes and their inflammatory mediators. The present study was performed to compare the activity of the inflammatory enzymes myeloperoxidase (MPO) and N-acetylglucosaminidase (NAG) in patients with endometriosis-related infertility and in normally ovulating women undergoing intracytoplasmic sperm injection (ICSI).Material and Methods: This prospective study included infertile women undergoing ICSI treatment. These women were divided into two groups: endometriosis anovulation (n = 18) and normally ovulating (n = 20). NAG and MPO activity was evaluated colorimetrically in serum and in follicular fluids obtained at the time of oocyte retrieval.Results: There was a significant correlation between the serum and follicular fluid activities of NAG and MPO (tau = 0.256, P = 0.025; and tau = -0.234, P = 0.041; respectively). Both serum and follicular fluid NAG activities were higher in patients with endometriosis compared to the control group (P < 0.001). MPO follicular fluid activity was lower in patients with endometriosis compared to normally ovulating women (P = 0.016).Conclusion: Infertile patients with endometriosis show a distinct pattern of serum and follicular fluid macrophage/neutrophil activation compared to normally ovulating women undergoing ICSI, which may reflect the role of immune and inflammatory alterations in endometriosis-related infertility.

Sub-registro de acidentes do trabalho em localidade do Estado de São Paulo, 1997

OBJETIVO: Estimar o número de acidentes do trabalho ocorridos em determinada localidade e intervalo de tempo e a extensão do sub-registro de casos. MÉTODOS: Amostraram-se 4.782 domicílios residenciais do município de Botucatu, SP, contendo 17.219 moradores, em primeiro de julho de 1997. em cada um dos domicílios, um morador adulto era entrevistado para identificar ocorrência de acidentes do trabalho nos três meses precedentes à entrevista. Nos casos positivos, os acidentados foram entrevistados. Para cálculo do intervalo de confiança utilizou-se a formula de Cochran. RESULTADOS: Confirmaram ter sofrido acidente do trabalho 76 indivíduos, estimando-se em 1.810 o número desses eventos em Botucatu no ano de 1997 e a proporção de incidência em 4,1% (IC95% 3,0%-5,3%). Dos 76 acidentados, 39 não eram cobertos pelo seguro acidente previdenciário (51,3% IC95% 41,1%-61,6%), não se enquadrando na obrigatoriedade de emissão de Comunicação de Acidente do Trabalho (funcionários públicos estatutários, autônomos, assalariados sem registro em carteira, proprietários e outros). Dentre os 37 casos com obrigatoriedade de emissão desse documento, 20 casos não possuíam (54,1% IC39,4%-68,7%). Houve maior proporção de sub-registro de casos em trabalhadores de micro, pequenas e médias empresas, do que entre grandes empresas. Apenas 22,4% (IC13,8%, 30,9%) dos acidentes do trabalho informados nas entrevistas domiciliares foram captados pelos registros previdenciários CONCLUSÕES: Os achados indicam a necessidade de melhoria de utilização de outras fontes de informação, além das Comunicações de Acidentes do Trabalho, para elaboração das estatísticas oficiais sobre acidentes do trabalho.

Effects of muscarinic receptor antagonists on acetylcholine-induced contractions of jejunal smooth muscle in horses

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

An unusual gangrenous goat mastitis caused by Staphylococcus aureus, Clostridium perfringens and Escherichia coli co-infection

Relata-se, pela primeira vez no Brasil, a ocorrência de mastite gangrenosa caprina atípica causada pela co-infecção por Staphylococcus aureus, Clostridium perfringens e Escherichia coli em uma cabra da raça Boer, na segunda semana de lactação. Descrevem-se os achados clínicos, os procedimentos de diagnóstico microbiológico e a conduta terapêutica.

Effect of Er : YAG and diode laser irradiation on the root surface: Morphological and thermal analysis

Background: the aim of the present study was to compare the effects of Er:YAG and diode laser treatments of the root surface on intrapulpal temperature after scaling and root planing with hand instruments.Methods: Fifteen extracted single-rooted teeth were scaled and root planed with hand instruments. The teeth were divided into 3 groups of 5 each and irradiated on their buccal and lingual surfaces: group A: Er:YAG laser, 2.94 mum/100 mJ/10 Hz/ 30 seconds; group B: diode laser, 810 nm/1.0 W/0.05 ms/30 seconds; group C: diode laser, 810 nm/1.4 W/0.05 ms/30 seconds. The temperature was monitored by means of a type T thermocouple (copper-constantan) positioned in the pulp chamber to assess pulpal temperature during and before irradiation. Afterwards, the specimens were longitudinally sectioned, and the buccal and lingual surfaces of each root were analyzed by scanning electron microscopy.Results: In the Er:YAG laser group, the thermal analysis revealed an average temperature of -2.2 +/- 1.5degreesC, while in the diode laser groups, temperatures were 1.6 +/- 0.8degreesC at 1.0 W and 3.3 +/- 1.0degreesC at 1.4 W. Electronic micrographs revealed that there were no significant morphological changes, such as charring, melting, or fusion, in any group, although the specimens were found to be more irregular in the Er:YAG laser group.Conclusions: the application of Er:YAG and diode lasers at the utilized parameters did not induce high pulpal temperatures. Root surface irregularities were more pronounced after irradiation with an Er:YAG laser than with a diode laser.

Histological analyses of thermal effect caused by 1.2 W diode laser irradiation at rat periodontal pockets

The aim of this in vivo study was to evaluate the thermal effects caused by 810 nm 1.2 W diode laser irradiation of periodontal tissues. Despite all data available concerning the laser application for periodontal treatment, one of the most relevant challenges is to prevent the harmful tissue heating induced by different clinical protocols. Periodontal pockets were induced at molars in 96 rats. Several irradiation powers under CW mode were investigated: 0, 400, 600, 800, 1000, 1200 mW. The pockets were irradiated using a 300 A mu m frontal illumination fiber. The animals were killed at 4 or 10 days after irradiation. The mandible was surgically removed and histologically processed. The histological sections stained with H/E demonstrated that irradiation parameters up to 1000 mW were thermally safe for the periodontal tissues. The sections stained with Brown & Brenn technique evidenced bacteria in the periodontal tissues. Consequently, the diode laser irradiation as a unique treatment was not capable to eliminate bacteria of the biofilm present in the pockets. According to the methodology used here, it was concluded that the thermal variation promoted by a diode laser can cause damage to periodontal tissues depending on the energy density used. The 1.2 W diode laser irradiation itself does not control the bacteria present in the biofilm of the periodontal pockets without mechanical action. The knowledge of proper high intensity laser parameters and methods of irradiation for periodontal protocols may prevent any undesirable thermal damage to the tissues.

Effect of metal conditioners on the adhesive bonding of resin cements to cast titanium

Objective: To assess the effect of metal conditioners on the bond strength between resin cements and cast titanium. Method and Materials: Commercially pure titanium (99.56%) was cast using an arc casting machine. Surfaces were finished with 400-grit silicon carbide paper followed by air abrasion with 50-mu m aluminum oxide. A piece of double-coated tape with a 4-mm circular hole was then positioned on the metal surface to control the area of the bond. The prepared surfaces were then divided into 4 groups (n=10): G1, unprimed Panavia F; G2, Alloy Primer-Panavia F; G3, unprimed Bistite DC; G4, Metaltite-Bistite DC. Forty minutes after insertion of the resin cements, the specimens were detached from the mold and stored in water at 37 C for 24 hours. Shear bond strength was performed in a testing machine (MTS 810) at a crosshead speed of 0.5 mm/min. Data were analyzed using ANOVA and Tukey's test with a .05 significance level. The fractured surfaces were observed through an optical microscope at 10x magnification. Results: the G1 group demonstrated significantly higher shear bond strength (17.95 MPa) than the other groups. G3 (13.79 MPa) and G4 (12.98 MPa) showed similar mean values to each other and were statistically superior to G2 (9.31 MPa). Debonded surfaces generally presented adhesive failure between metal surfaces and resin cements. Conclusion: While the Metaltite conditioner did not influence the bond strength of the Bistite DC cement, the Alloy Primer conditioner significantly decreased the mean bond strength of the Panavia F cement.

Diametral tensile strength and film thickness of an experimental dental luting agent derived from castor oil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Flexural strength of acrylic resin repairs processed by different methods: water bath, microwave energy and chemical polymerization

Denture fractures are common in daily practice, causing inconvenience to the patient and to the dentists. Denture repairs should have adequate strength, dimensional stability and color match, and should be easily and quickly performed as well as relatively inexpensive. Objective: The aim of this study was to evaluate the flexural strength of acrylic resin repairs processed by different methods: warm water-bath, microwave energy, and chemical polymerization. Material and methods: Sixty rectangular specimens (31x10x2.5 mm) were made with warm water-bath acrylic resin (Lucitone 550) and grouped (15 specimens per group) according to the resin type used to make repair procedure: 1) specimens of warm water-bath resin (Lucitone 550) without repair (control group); 2) specimens of warm water-bath resin repaired with warm water-bath; 3) specimens of warm water-bath resin repaired with microwave resin (Acron MC); 4) specimens of warm water-bath resin repaired with autopolymerized acrylic resin (Simplex). Flexural strength was measured with the three-point bending in a universal testing machine (MTS 810 Material Test System) with load cell of 100 kgf under constant speed of 5 mm/min. Data were analyzed statistically by Kruskal-Wallis test (p<0.05). Results: The control group showed the best result (156.04 +/- 1.82 MPa). Significant differences were found among repaired specimens and the results were decreasing as follows: group 3 (43.02 +/- 2.25 MPa), group 2 (36.21 +/- 1.20 MPa) and group 4 (6.74 +/- 0.85 MPa). Conclusion: All repaired specimens demonstrated lower flexural strength than the control group. Repairs with autopolymerized acrylic resin showed the lowest flexural strength.

Flexural strength and hardness of reline and denture base acrylic resins after different exposure times of microwave disinfection

Objectives: To evaluate the effect of microwave disinfection on the flexural strength and Vickers hardness of 4 autopolymerized resins (Kooliner [K], Tokuso Rebase Fast [T], Ufi Gel Hard [U], and New Truliner [N]) and 1 denture base resin (Lucitone 550 [L]). Method and Materials: For each material, 48 specimens (64 x 10 x 3.3 mm) were made and divided into 6 equal groups (n = 8). In the control group, specimens were untreated. Before testing, specimens were immersed in 200 mL of distilled water and submitted to disinfection for 1 of the following irradiation times: 1, 2, 3, 4, or 5 minutes. The irradiation procedure was performed twice. The flexural strength was determined using a testing machine MTS-810 and measurements of Vickers hardness were made on Micromet 2100. The values were submitted to ANOVA and Tukey's test (P = .05). Results: The K material showed a significant increase (P = .0010) in flexural strength following 5 minutes of disinfection compared to control specimens. The flexural strength mean values of materials T, U, and N were not significantly affected (P > .05) by disinfection. Compared to the control group, the K material showed a significant increase in hardness (P < .001) following disinfection for 3, 4, and 5 minutes. For material U, disinfection for 4 and 5 minutes produced specimens with significantly increased hardness values (P < .001) compared to the control group. For material N, disinfection for 5 minutes resulted in significantly higher hardness values (P < .001) than the control group. Conclusion: Regardless of the irradiation time, the flexural strength and hardness of the materials evaluated were not detrimentally affected by microwave disinfection. (Quintessence Int 2008;39:833-840)

Fracture strength of flared bovine roots restored with different intraradicular posts

Objective: The aim of this study was to evaluate the fracture strength and failure mode of flared bovine roots restored with different intraradicular posts. Material and Methods: Fifty bovine incisors with similar dimensions were selected and their roots were flared until 1.0 mm of dentin wall remained. Next, the roots were allocated into five groups (n=10): GI-cast metal post-and-core; GII-fiber posts plus accessory fiber posts; GIII-direct anatomic post; GIV-indirect anatomic post and GV-control (specimens without intraradicular post). A polyether impression material was used to simulate the periodontal ligament. After periodontal ligament simulation, the specimens were subjected to a compressive load at a crosshead speed of 0.5 mm/min in a servo-hydraulic testing machine (MTS 810) applied at 135 to the long axis of the tooth until failure. The data (N) were subjected to ANOVA and Tukey's post-hoc test (alpha=0.05). Results: GI and GIV presented higher fracture strength (p<0.05) than GII. GIII presented intermediate values without statistically significant differences (p>0.05) from GI, GII and GIV. Control specimens (GV) produced the lowest fracture strength mean values (p<0.05). Despite obtaining the highest mean value, GI presented 100% of unfavorable failures. GII presented 20% of unfavorable failures. GIII, GIV and GV presented only favorable failures. Conclusions: Although further in vitro and in vivo studies are necessary, the results of this study showed that the use of direct and indirect anatomic posts in flared roots could be an alternative to cast metal post-and-core.

Influence of Er:YAG laser on surface treatment of aged composite resin to repair restoration

The purpose of this study was to investigate the effect of Er:YAG laser on surface treatment to the bond strength of repaired composite resin after aged. Sixty specimens (n = 10) were made with composite resin (Z250, 3M) and thermocycled with 500 cycles, oscillating between 5 to 55A degrees C. The specimens were randomly separated in six groups which suffered the following superficial treatments: no treatment (GI, control), wearing with diamond bur (GII), sandblasted with aluminum oxide with 27.5 A mu m particles (GIII) for 10 s, 200 mJ Er:YAG laser (GIV), 300 mJ Er:YAG laser (GV), and 400 mJ Er:YAG laser (GVI), with the last 3 groups under a 10 Hz frequency for 10 s. Restoration repair was done using the same composite. The shear test was done into the Universal testing machine MTS-810. Analyzing the results through ANOVA and Tukey test, no significant differences were found (p-value is 0.5120). Average values analysis showed that superficial treatment with aluminum oxide presented the highest resistance to shear repair interface (8.91MPa) while 400 mJ Er:YAG laser presented the lowest (6.76 MPa). Fracture types analysis revealed that 90% suffered cohesive fractures to GIII. The Er:YAG laser used as superficial treatment of the aged composite resin before the repair showed similar results when used diamond bur and sandblasting with aluminum oxide particles.

Investigation of cytotoxic, apoptosis-inducing, genotoxic and protective effects of the flavonoid rutin in HTC hepatic cells

Rutin is a flavonoid with antioxidant, vasodilatory, anti-inflammatory and immune-stimulating activities. To study the toxicity of rutin and its protective effect, this work investigated the cytotoxic, apoptosis-inducing, genotoxic and protective effects of rutin in HTC cells. In the MTT assay, the highest concentration tested (810 mu M) showed cytotoxicity after 72 h of treatment, where cell viability and cell proliferation was diminished. None of the concentrations of rutin tested induced apoptosis after 24 h treatment. The highest concentration of rutin after 24 h treatment induced DNA damage, shown in the comet assay, but did have a genotoxic effect in the micronucleus test. Rutin was tested against the pro-carcinogenic agent benzo(a)pyrene, at concentrations of 90, 270 and 810 mu M, and was found to reduce induced DNA damage significantly. This protective effect of rutin against a pro-carcinogen, suggests an important biological activity for this compound, which can contribute to human health through the diet. (C) 2010 Elsevier GmbH. All rights reserved.

Respostas fisiológicas durante o exercício contínuo e intermitente: implicações para a avaliação e a prescrição do treinamento aeróbio

The objective of this study was to review the acute responses to maximal and supramaximal intermittent exercise (intensities near or above maximal oxygen uptake - iVO(2)max), and also at submaximal intermittent exercise, with intensities near maximal lactate steady state (MLSS). At the conditions of interval training above 100% iVO(2)max with short repetitions (<60 s), the passive recovery between the repetitions allows higher intensity during sets. For longer repetitions, the active recovery can be more efficient, since promotes greater blood lactate removal and longer time near VO(2)max. At the conditions of submaximal interval training, the relationship between intensity and duration of the repetitions are still maintained, i.e., the longer durations (>300 s) allow lower intensities and the shorter (150-300 s) allow higher intensities, with similar metabolic conditions (i.e., MLSS). However, both recovery types can be utilized, since they proportionate similar intensities at these conditions.