851 resultados para product category
Resumo:
Today lean-philosophy has gathered a lot of popularity and interest in many industries. This customer-oriented philosophy helps to understand customer’s value creation which can be used to improve efficiency. A comprehensive study of lean and lean-methods in service industry were created in this research. In theoretical part lean-philosophy is studied in different levels which will help to understand its diversity. To support lean, this research also presents basic concepts of process management. Lastly theoretical part presents a development model to support process development in systematical way. The empirical part of the study was performed by performing experimental measurements during the service center’s product return process and by analyzing this data. Measurements were used to map out factors that have a negative influence on the process flow. Several development propositions were discussed to remove these factors. Problems mainly occur due to challenges in controlling customers and due to the lack of responsibility and continuous improvement on operational level. Development propositions concern such factors as change in service center’s physical environment, standardization of work tasks and training. These factors will remove waste in the product return process and support the idea of continuous improvement.
Resumo:
Netnography has been studying in various aspects (e.g. definitions of netnography, application of netngoraphy, conducting procedure…) within different industrial contexts. Besides, there are many studies and researches about new product development in various perspectives, such as new product development models, management of new product development project, or interaction between customers and new product design, and so on. However, the connection and the interaction between netnography and new product development have not been studied recently. This opens opportunities for the writer to study and explore unrevealed issues regarding to applying netnography in new product development. In term of the relation between netnography and new product development, there are numerous of matters need to be explored; for instance, the process of applying netnography in order to benefit to new product development, the involvement degree of netnography in new product development process, or eliminating useless information from netnography so that only crucial data is utilized, and so on. In this thesis, writer focuses on exploring how netnography is applied in new product development process, and what benefits netnography can contribute to the succeed of the project. The aims of this study are to understand how netnography is conducted for new product development purpose, and to analyse the contributions of netnography in the new product development process. To do so, a case-study strategy will be conducted with triple case studies. The case studies are chosen bases on many different criteria in order to select the most relevant cases. Eventually, the writer selected three case studies, which are Sunless tanning product project (HYVE), Listerine (NetBase), and Nivea co-creation and netnography in black and white deodorant. The case study strategy applied in this thesis includes four steps e.g. case selection, data collection, case study analysis, and generating the research outcomes from the analysis. This study of the contributions of netnography in the new product development process may be useful for the readers in many ways. It offers the fundamental knowledge of netnography market research method and basic understanding of new product development process. Additionally, it emphasizes the differences between netnography and other market research methods in order to explain the reasons why many companies and market research agents recently utilized netnography in their market research projects. Furthermore, it highlights the contributions of netnography in the new product development process in order to indicate the importance of netnography in developing new product. Thus, the potential readers of the study can be students, marketers, researchers, product developers, or business managers.
Resumo:
The purpose of this study is to identify factors contributory to success or failure of a microenterprise. Microenterprise is an enterprise with less than10 employees. About 99 % of all Finnish enterprises fall in this category. Earlier studies do not provide a comprehensive view on microenterprise success and failure factors. The theoretical part discusses the definition of success and failure, previous research and results already established about the topic and categories of business environment. The empirical part is founded on quantitative survey results from 204 Finnish microenterprises. The questions of the survey were based on previous surveys, literature and intuition. Both success and failure factors were enquired. Summary of the results was made and the results were compared among successful and unsuccessful enterprises. In open-end questions, the most important factors mentioned to affect enterprise performance positively were "Employees", "Customers" and "Skills, knowledge, education and experience." The most important factors affecting enterprise performance negatively were "Economical situation", "Employees availability and attitudes" as well as "Political decisions and passed laws". In Likert-scale set of questions, the most significant factors from the point of view of enterprise performance were "Product and / or service good quality", "Good reputation of the company" and "Staff's strong skills". The least significant factors were "Effect of marketing and promotion", "Conflicts" and "Differences of points of views of different generations". By Likert-scale set of questions, it was also tested which operations the enterprises perform, and according to the results, successful enterprises found "Performing a market research", "Use of distribution channel in sales" and "Expanding to new markets" less important than unsuccessful enterprises. The tests proved that the age of the enterprise correlates with the level of success of the enterprise: The younger the enterprise, the more successful it is. In addition, the results show that if the enterprise is family based, the less successful it is. In addition, there was also slight correlation between success and the level of growth, indicating that higher the level of growth the more successful the enterprise is. From the business environment point of view, the key finding was that internal factors affect more on the success of an enterprise than external factors, and that external factors affect more on the failure of an enterprise than internal factors.
Resumo:
This study will concentrate on Product Data Management (PDM) systems, and sheet metal design features and classification. In this thesis, PDM is seen as an individual system which handles all product-related data and information. The meaning of relevant data is to take the manufacturing process further with fewer errors. The features of sheet metals are giving more information and value to the designed models. The possibility of implementing PDM and sheet metal features recognition are the core of this study. Their integration should make the design process faster and manufacturing-friendly products easier to design. The triangulation method is the basis for this research. The sections of this triangle are: scientific literature review, interview using the Delphi method and the author’s experience and observations. The main key findings of this study are: (1) the area of focus in triangle (the triangle of three different point of views: business, information exchange and technical) depends on the person’s background and their role in the company, (2) the classification in the PDM system (and also in the CAD system) should be done using the materials, tools and machines that are in use in the company and (3) the design process has to be more effective because of the increase of industrial production, sheet metal blank production and the designer’s time spent on actual design and (4) because Design For Manufacture (DFM) integration can be done with CAD-programs, DFM integration with the PDM system should also be possible.
Resumo:
Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014
Resumo:
Presentation at Open Repositories 2014, Helsinki, Finland, June 9-13, 2014
Resumo:
Työn tilaajana toimi Visedo Oy. Työn tavoitteina oli tutkia Visedo Oy:n ohjelmistokehityksen nykytila, tunnistaa seuraavat parannuskohteet ja antaa ohjeita havaittujen parannuskohteiden korjaamiseksi. Visedo Oy:n tehonmuokkain ohjelmistokehityksen nykytilaa käsiteltiin neljän valitun osa-alueen näkökulmasta: ohjelmistoarkkitehtuurityyli, komponenttipohjainen ohjelmistokehitys, ohjelmistotuotelinjojen kehitysmenetelmät ja ohjelmistovariaatioiden hallinta. Valituilla osa-alueilla havaittujen parannuskohteiden perusteella annettiin korjausehdotuksia: ohjelmistoarkkitehtuurin rakenteeseen, komponenttien jakautumiselle, komponenttien koostamiselle ja komponenttien versioinnille. Lisäksi ehdotettiin uudenlaista ohjelmistotuotelinja rakennetta, joka yhdistää kerros- ja komponenttipohjaiset arkkitehtuurityylit mahdollistaen ominaisuuksiltaan eroavien tehonmuokkain ohjelmistojen hallinnan.
Resumo:
The master´s thesis had three aims; to develop a service portfolio, to support the management of services through the developed portfolio, and evaluate effects of service differentiation strategy on the future selection of services. The product oriented case company in service paradox is Hilti (Suomi) Oy, which is entering systematic service management era, supported by the late strategic change. Low return on service business investments is referred as service paradox. The project was carried out as a case study, where the primary information source was twenty-one conducted interviews. The theory part focuses on marketing logics, service strategies, and categorization of services. The empirical part contributes in solving the aim related research questions. As a result of the case study a service portfolio was created, next further steps in service management were suggested, and the effect on selection of services by service differentiation strategy was evaluated. The main goal of creating service portfolio contributes to systematic management of services, which required revising at the case company.
Resumo:
Tässä tutkielmassa analysoidaan teoksessa ’Diagnostic and Statistical Manual of Men-tal Disorders, Fifth Edition’ (DSM-5) ja tarkemmin sen kappaleessa ’Gender Dysphoria’ käytettyä kieltä. DSM-5 on mielenterveydenalan ammattilaisille suunnattu luokittelu virallisesti tunnustetuista mielenterveyden häiriöistä ja se sisältää myös oireiden kuvai-luun perustuvat ohjeet näiden mielenterveyshäiriöiden diagnosoimiseksi. ’Gender dys-phoria’ (vapaasti suomennettuna sukupuolidysforia) on lääketieteellinen termi, joka viittaa biologisesta sukupuolesta eriävän sukupuoli-identiteetin aiheuttamaan henki-seen pahoinvointiin. Sukupuoli-identiteetin ja mielenterveysongelman yhdistäminen sisältää ideologisiin arvoihin pohjautuvia perusteluja ja tässä tutkielmassa analysoi-daan ’Gender Dysphoria’ – kappaleen ideologista sisältöä kriittisestä näkökulmasta. Tutkimuksen tarkastellaan ’Gender Dysphoria’ – kappaleessa käytetyn kielen ideologi-sia heijastumia ja niiden sosiaalisia vaikutuksia kolmen tutkimuskysymyksen avulla: 1) Kuinka diagnosoitu henkilö esitetään tekstissä? 2) Kuinka tekstissä rakennetaan kuvaa sukupuolidysforiasta mielenterveyshäiriönä? 3) Miten analyysin tulokset saattavat vai-kuttaa käsitykseen sukupuolen yhteydestä mielenterveyteen ja sukupuolidysforian diagnosoimiseen. Analyysissä käytetään metodina M. A. K. Hallidayn transitiivisuusteo-riaa ja tulosten sosiaalisia vaikutuksia analysoidaan Norman Faircloughn diskurssiana-lyysimallin avulla. Transitiivisuusanalyysin avulla tarkastellaan kirjoittajien tekemiä va-lintoja kielenkäytön suhteen, jotka Hallidayn teorian mukaan heijastavat kirjoittajien henkilökohtaisia kokemuksia ympäröivästä maailmasta. Tutkimus paljasti, että sukupuolidysforia esitetään mielenterveysongelmana erotta-malla se yksilöstä erilliseksi toimijaksi, joka suorittaa erilaisia prosesseja yksilön sisällä. Yksilöistä erityisesti lapset esitetään tekstissä voimakkaasti perinteisiin sukupuoliroo-leihin pohjautuvan ideologian valossa, joka heijastuu oireiden kuvailuun. Analyysi osoittaa myös logiikkaongelmia lasten oireiden kuvailussa, jotka johtavat ristiriitoihin oireiden ja mielenterveysongelman yhteydessä ja kumoavat perusteet, joiden pohjalta lapset diagnosoidaan. Tutkimuksen lopussa ehdotetaan, että sukupuolidysforiaan liit-tyvien diagnoosiohjeiden ja – kriteerien perusteita muokataan yleisesti sukupuoli-identiteetin itsemääräämisoikeuteen pohjautuvaksi ja lasten osalta tekstiin sisällytet-täisiin mahdollisia tieteellisiä perusteluja, jotka kumoaisivat diagnoosiohjeiden nyky-muodossaan sisältämät ristiriidat ja perustelisivat lasten diagnosoinnin oikeellisuuden
Resumo:
A process for purifying bovine pancreatic glucagon as a by-product of insulin production is described. The glucagon-containing supernatant from the alkaline crystallization of insulin was precipitated using ammonium sulfate and isoelectric precipitation. The isoelectric precipitate containing glucagon was then purified by ion-exchange chromatography on Q-Sepharose FF, gel filtration on Sephadex G-25 and ion-exchange chromatography on S-Sepharose FF. A pilot scale test was performed with a recovery of 87.6% and a purification factor of 8.78 for the first chromatographic step, a recovery of 75.1% and a purification factor of 3.90 for the second, and a recovery of 76.2% and a purification factor of 2.36 for the last one. The overall yield was 50%, a purification factor of 80.8 was obtained and the fraction containing active glucagon (suitable for pharmaceutical preparations) was 84% pure as analyzed by HPLC
Resumo:
To evaluate the effect of exercise intensity on post-exercise cardiovascular responses, 12 young normotensive subjects performed in a randomized order three cycle ergometer exercise bouts of 45 min at 30, 50 and 80% of VO2peak, and 12 subjects rested for 45 min in a non-exercise control trial. Blood pressure (BP) and heart rate (HR) were measured for 20 min prior to exercise (baseline) and at intervals of 5 to 30 (R5-30), 35 to 60 (R35-60) and 65 to 90 (R65-90) min after exercise. Systolic, mean, and diastolic BP after exercise were significantly lower than baseline, and there was no difference between the three exercise intensities. After exercise at 30% of VO2peak, HR was significantly decreased at R35-60 and R65-90. In contrast, after exercise at 50 and 80% of VO2peak, HR was significantly increased at R5-30 and R35-60, respectively. Exercise at 30% of VO2peak significantly decreased rate pressure (RP) product (RP = HR x systolic BP) during the entire recovery period (baseline = 7930 ± 314 vs R5-30 = 7150 ± 326, R35-60 = 6794 ± 349, and R65-90 = 6628 ± 311, P<0.05), while exercise at 50% of VO2peak caused no change, and exercise at 80% of VO2peak produced a significant increase at R5-30 (7468 ± 267 vs 9818 ± 366, P<0.05) and no change at R35-60 or R65-90. Cardiovascular responses were not altered during the control trial. In conclusion, varying exercise intensity from 30 to 80% of VO2peak in young normotensive humans did not influence the magnitude of post-exercise hypotension. However, in contrast to exercise at 50 and 80% of VO2peak, exercise at 30% of VO2peak decreased post-exercise HR and RP.
Resumo:
This study was done for ABB Ltd. Motors and Generators business unit in Helsinki. In this study, global data movement in large businesses is examined from a product data management (PDM) and enterprise resource planning (ERP) point-of-view. The purpose of this study was to understand and map out how a large global business handles its data in a multiple site structure and how it can be applied in practice. This was done by doing an empirical interview study on five different global businesses with design locations in multiple countries. Their master data management (MDM) solutions were inspected and analyzed to understand which solution would best benefit a large global architecture with many design locations. One working solution is a transactional hub which negates the effects of multisite transfers and reduces lead times. Also, the requirements and limitations of the current MDM architecture were analyzed and possible reform ideas given.
Resumo:
Työn tavoitteena oli arvioida tuotteen ympäristöjalanjälki –menetelmän (PEF) käytettävyyttä ympäristöviestintään. PEF-metodologiaa vertailtiin muihin ympäristötehokkuuden laskenta- ja viestintätyökaluihin, jotta löydettäisiin PEF:n epäkohtia ja vaihtoehtoja menetelmäpäätösten toimivammaksi muuttamiseen. Työssä tehtiin myös haastattelututkimus yhden tuoteryhmäsääntöjen (PEFCR) laadintaprojektin toimijoille, jotta löydettäisiin PEFCR:ien laadinnan epäkohtia. Työssä arviointiin myös testattavaksi ehdotetun PEF-merkinnän käytettävyyttä ympäristöviestintään. Työssä todettiin, että PEF-metodologiassa on epäkohtia, joiden todellinen merkitys ja vaikutus selviävät vasta pilottivaiheen jälkeen. PEF:ssä on annettu vähemmän vapauksia menetelmäpäätösten tekoon kuin nykyisissä menetelmissä, mutta se mahdollistaa paremmat lähtökohdat halvemmille ja vertailukelpoisemmille selvityksille. Ympäristöviestinnän kannalta erityisesti PEFCR:ien toimivaksi saaminen on hyvin tärkeää, jotta työkalulla on edellytykset käyttöönotolle. Lähtökohdat PEFCR:ien toimivaksi saamiseksi ovat kunnossa, mutta projektin tiukka aikataulu yhdessä PEF:n ja PEFCR:ien kyseenalaisten menetelmäpäätösten kanssa saattavat aiheuttaa ongelmia. Menetelmän käyttöönoton onnistumiseen vaikuttavat myös työkalusta riippumattomat asiat, kuten nykyiset ympäristömerkintäjärjestelmät sekä kuluttajakäytöksen muuttamiseen ja yritysmaailman integrointiin PEF:n käyttäjiksi liittyvät haasteet.
Resumo:
The aim of this thesis was to develop the category planning process in the case company operating in construction industry. As the interest in the field of research has just recently started to emerge towards the benefits of category management and planning, the theoretical background was derived from literature of subjects with a relation to category planning i.e. procurement strategy, purchasing portfolio model, information flow management and cost analysis. The background for the development of category planning process was derived from retail industry, to where the category planning is more researched. The empirical study was executed with mixed method approach: quantitative data of the categories was analyzed and qualitative data was gathered through semi-structured interview and discussions within the case company. As a result, the category planning process was critically analyzed and development proposals addressed for improving the process description. Additionally a tool was developed based on the empirical study to support the category planning process of the case company.