EEG signal analysis via a cleaning procedure based on multivariate empirical mode decomposition

Artifacts are present in most of the electroencephalography (EEG) recordings, making it difficult to interpret or analyze the data. In this paper a cleaning procedure based on a multivariate extension of empirical mode decomposition is used to improve the quality of the data. This is achieved by applying the cleaning method to raw EEG data. Then, a synchrony measure is applied on the raw and the clean data in order to compare the improvement of the classification rate. Two classifiers are used, linear discriminant analysis and neural networks. For both cases, the classification rate is improved about 20%.

The effect of pesticides and alien invesive species on soil biota and litter decomposition rates in a Mediterrean-climate ecosystem of Western Australia

Ecosystems are complex systems and changing one of their components can alter their whole functioning. Decomposition and biodiversity are two factors that play a role in this stability, and it is vital to study how these two factors are interrelated and how other factors, whether of human origin or not, can affect them. This study has tested different hypotheses regarding the effects of pesticides and invasive species on the biodiversity of the soil fauna and litter decomposition rate. Decomposition was measured using the litterbags technique. Our results indicate that pesticides had a negative effect on decomposition whereas invasive species increased decomposition rate. At the same time, the diversity of the soil biota was unaffected by either factor. These results allow us to better understand the response of important ecosystem functions to human‐induced alterations, in order to mitigate harmful effects or restore them wherever necessary.

Disentangling water usage in the European Union: A decomposition analysis

The Water Framework Directive (WFD) defines common objectives for water resources throughout the European Union (EU). Given this general approach to water preservation and water policy, the objective of this paper is to analyse whether common patterns of water consumption exist within Europe. In particular, our study uses two methods to reveal the reasons behind sectoral water use in all EU countries. The first method is based on an accounting indicator that calculates the water intensity of an economy as the sum of sectoral water intensities. The second method is a subsystem input‐output model that divides total water use into different income channels within the production system. The application uses data for the years 2005 and 2009 on water consumption in the production system of the 27 countries of the EU. From our analysis it emerges that EU countries are characterized by very different patterns of water consumption. In particular water consumption by the agriculture sector is extremely high in Central/Eastern Europe, relative to the rest of Europe. In most countries, the water used by the fuel, power and water sector is consumed to satisfy domestic final demand. However, our analysis shows that for some countries exports from this sector are an important driver of water consumption. Focusing on the agricultural sector, the decomposition analysis suggests that water usage in Mediterranean countries is mainly driven by final demand for, and exports of, agricultural products. In Central/Eastern Europe domestic final demand is the main driver of water consumption, but in this region the proportion of water use driven by demand for exports is increasing over time. Given these heterogeneous water consumption patterns, our analysis suggests that Mediterranean and Central/Eastern European countries should adopt specific water policies in order to achieve efficient levels of water consumption in the European Union. JEL codes: N5; C67 Keywords: Water use, Subsystem input–output model; Water intensity, European Union.

Off-axis low-coherence interferometry for surface topology measurement.

In this communication we introduce a low or reduced coherence interferometry technique that can be used to retrieve surface topology on samples with high roughness. Moreover, we will show that the approach enables surface topology measurement also at the interface of so-called turbid media, where multiple scattering inside tissues can be a major issue, preventing accurate measurements.

Available evidence and outcome of off-label use of rituximab in clinical practice

Purpose: To analyze the therapeutic indications for off-label use of rituximab, the available evidence for its use, the outcomes, and the cost. Methods: This was a retrospective analysis of patients treated with rituximab for off-label indications from January 2007 to December 2009 in two tertiary hospitals. Information on patient characteristics, medical conditions, and therapeutic responses was collected from medical records. Available evidence for the efficacy of rituximab in each condition was reviewed, and the cost of treatment was calculated. Results: A total of 101 cases of off-label rituximab use were analyzed. The median age of the patients involved was 53 [interquartile range (IQR) 37.568.0] years; 55.4 % were women. The indications for prescribing rituximab were primarily hematological diseases (46 %), systemic connective tissue disorders (27 %), and kidney diseases (20 %). Available evidence supporting rituximab treatment for these indications mainly came from individual cohort studies (53.5 % of cases) and case series (25.7 %). The short-term outcome (median 3 months, IQR 24 months) was a complete response in 38 % of cases and partial response in 32.6 %. The highest short-term responses were observed for systemic lupus erythematosus and membranous glomerulonephritis, and the lowest was for neuromyelitis optica, idiopathic thrombocytopenic purpura, and miscellaneous indications. Some response was maintained in long-term follow-up (median 23 months IQR 1230months) in 69.2%of patients showing a short-term response. Median cost per patient was 5,187.5 (IQR 5,187.57,781.3). Conclusions: In our study, off-label rituximab was mainly used for the treatment of hematological, kidney, and systemic connective tissue disorders, and the response among our patient cohort was variable depending on the specific disease. The level of evidence supporting the use of rituximab for these indications was low and the cost was very high. We conclude that more clinical trials on the off-label use of rituximab are needed, although these may be difficult to conduct in some rare diseases. Data from observational studies may provide useful information to assist prescribing in clinical practice.

Practical Data Collection: Establishing Methods and Procedures for Measuring Water Clarity and Turbidity of Storm Water Run-Off from Active Major Highway Construction Sites, 2014

In anticipation of regulation involving numeric turbidity limit at highway construction sites, research was done into the most appropriate, affordable methods for surface water monitoring. Measuring sediment concentration in streams may be conducted a number of ways. As part of a project funded by the Iowa Department of Transportation, several testing methods were explored to determine the most affordable, appropriate methods for data collection both in the field and in the lab. The primary purpose of the research was to determine the exchangeability of the acrylic transparency tube for water clarity analysis as compared to the turbidimeter.

Product Standardization of Shell and Tube Heat Exchangers

Diplomityön tavoitteena oli selvittää, kuinka kohdeyrityksessä nykyhetkellä pitkältiräätälöitynä tuotetut putkilämmönvaihtimet voitaisiin standardisoida, jotta pystyttäisiin kohdistamaan resursseja oikein ja parantamaan siten yrityksen taloudellista suorituskykyä. Tutkimuksen edetessä määräävimmäksi tekijäksi työn tuloksia ajatellen nousi taloudellinen standardisointiaste, jonka perusteeksi kohdeyrityksen putkilämmönvaihtimissa valittiin standardisoitu suunnitteluohjeisto. Suunnitteluohjeiston lisäksi tuotestandardiin liitettiin ehdotus toimintapojen automatisoimisesta parametrisen valintataulukon sekä sähköisen manuaalin avulla. Työssä tuotestandardisointia tarkastellaan rationalisointi-investointina ja sen kannattavuutta on tarkasteltu investointilaskelmien sekä herkkyys analyysin avulla. Alkuarvot investointilaskelmissa perustuvat työssä yhdelle putkilämmönvaihtimelletoteutettuun tuotestandardisointitapaan, jos tätä tapaa käytettäisiin jatkossa kaikkiin kyseisen yksikön putkilämmönvaihtimiin.

Decomposition of differences in PISA results in middle income countries

Programme for International Student Assessment

Decomposition of Ruppia cirrhosa (Petagna) Grande in the sediment of a coastal lagoon

The decomposition process of Ruppia cirrhosa was studied in a Mediterranean coastal lagoon in the Delta of the River Ebro (NE Spain). Leaves and shoots of Ruppia were enclosed in 1 mm-mesh and 100 pm-mesh litter bags to ascertain the effect of detritivores, macroinvertebrates, and bacteria and fungi, respectively. Changes in biomass and carbon, and, nitrogen and phosphorus concentrations in the detritus were studied at the sediment-water interface and in the sediment. Significant differences in biomass decay were observed between the two bag types. Significant differences in decomposition were observed between the two experimental conditions studied using 100 pm-mesh bags. These differences were not significant when using the 1 mm-mesh bags. The carbon content in the detritus remained constant during the decomposition process. The percentage of nitrogen increased progressively from an initial 2.4 % to 3 %. The percentage of phosphorus decreased rapidly during the first two days of decomposition from an initial 0.26 % to 0.17 %. This loss is greater in the sediment than in the water column or at the sediment-water interface. From these results we deduce that the activity of microorganisms seems to be more important in the sediment than in the water-sediment interface, and that grazing by macroinvertebrates has less importance in the sediment than in the water column.

Vastuu toimitusvahingoista polttonesteen toimituksissa, case oy Shell ab

Tutkimustyön tavoitteena oli selvittää polttonesteiden toimituksiin osallistuvien tahojen, eli myyjän, itsenäisen rahdinkuljettajan ja ostajan vastuun jakautuminen.. Lähtökohtaisesti myyjällä on viivästystilanteissa sekä kuluttaja-, että yritysasiakkaita kohtaan kontrollivastuu välittömistä ja tuottamusperusteinen vastuu välillisistä vahingoista, mutta korvausvelvollisuudesta voidaan vapautua tietyt tunnusmerkit täyttävän esteen perusteella. Virhevastuukin perustuu samanlaiselle kaksinkertaiselle vahinkolajikohtaiselle vastuuperuste-erottelulle, mutta myyjän on aina korvattava kuluttajalle aiheutuneet välittömät vahingot aiheuttamisvastuun perusteella. Lisäksi hän voi joutua hyvittämään kaikki mahdolliset menetyksen annetun erityisen sitoumuksen nojalla. Maksuviivästystilanteissa ostajan molempia vahinkolajeja koskeva vastuuperuste sijoittuu puhtaan aiheuttamis- ja kontrollivastuun väliin. Lainmukaisen myötävaikutusvelvollisuuden laiminlyönnin aiheuttamat vahingot korvataan noudattamalla myyjän viivästysvastuusäännöksiä, mutta tavaran vastaanottamisen tai noutamisen osalta vastuun toteutuminen edellytetään vielä sitä, että kaupankohteen pois toimittamisella on ollut myyjäpuolelle erityistä merkitystä. Kuluttaja-asiakkaalla ei kuitenkaan ole edellä mainittua vastuuta. Rahdinkuljettajalla on tavara- ja viivästysvahingoista ankara vastuu tietyn force majeure poikkeuksin. Tavallisesti korvausvelvollisuus rajoittuu tavaravahinkojen osalta 20 euroon painokiloa kohti ja viivästysvahingot on korvattava rahtia vastaavaan rahamäärään saakka. Kyseinen taho voi myös vapautua vastuusta kokonaan laissa mainittujen vastuuvapausperusteiden nojalla, mutta tahallinen tai törkeän huolimaton toiminta aiheuttaa täyden vahingonkorvausvastuun.