Task 6: Material Thermal Input for Iowa Materials, May 2008

The present research project was designed to determine thermal properties, such as coefficient of thermal expansion (CTE) and thermal conductivity, of Iowa concrete pavement materials. These properties are required as input values by the Mechanistic-Empirical Pavement Design Guide (MEPDG). In this project, a literature review was conducted to determine the factors that affect thermal properties of concrete and the existing prediction equations for CTE and thermal conductivity of concrete. CTE tests were performed on various lab and field samples of portland cement concrete (PCC) at the Iowa Department of Transportation and Iowa State University. The variations due to the test procedure, the equipment used, and the consistency of field batch materials were evaluated. The test results showed that the CTE variations due to test procedure and batch consistency were less than 5%, and the variation due to the different equipment was less than 15%. Concrete CTE values were significantly affected by different types of coarse aggregate. The CTE values of Iowa concrete made with limestone+graval, quartzite, dolomite, limestone+dolomite, and limestone were 7.27, 6.86, 6.68, 5.83, and 5.69 microstrain/oF (13.08, 12.35, 12.03, 10.50, and 10.25 microstrain/oC), respectively, which were all higher than the default value of 5.50 microstrain/oF in the MEPDG program. The thermal conductivity of a typical Iowa PCC mix and an asphalt cement concrete (ACC) mix (both with limestone as coarse aggregate) were tested at Concrete Technology Laboratory in Skokie, Illinois. The thermal conductivity was 0.77 Btu/hr•ft•oF (1.33 W/m•K) for PCC and 1.21 Btu/hr•ft•oF (2.09 W/m•K) for ACC, which are different from the default values (1.25 Btu/hr•ft•oF or 2.16 W/m•K for PCC and 0.67 Btu/hr•ft•oF or 1.16 W/m•K for ACC) in the MEPDG program. The investigations onto the CTE of ACC and the effects of concrete materials (such as cementitious material and aggregate types) and mix proportions on concrete thermal conductivity are recommended to be considered in future studies.

Material Thermal Inputs of Iowa Materials for MEPDG, 2011

The thermal properties of concrete materials, such as coeffi cient of thermal expansion (CTE), thermal conductivity, and heat capacity, are required by the MEPDG program as the material inputs for pavement design. However, a limited amount of test data is available on the thermal properties of concrete in Iowa. The default values provided by the MEPDG program may not be suitable for Iowa concrete, since aggregate characteristics have signifi cant infl uence on concrete thermal properties.

Reflexiones en torno a la cultura material. nuevas aproximaciones

Para cualquier arqueólogo, la cultura material representa la base de toda investigación ya que es la documentación prioritaria sobre la cual construye sus teorías e interpretaciones. En los últimos años, algunos antropólogos como Appadurai o Kopitoff han propuesto una nueva lectura de cómo analizar la cultura material en el ámbito de la etnografía. Algunas de sus propuestas, debidamente adaptadas, permiten una reflexión más amplia sobre el estudio de la cultura material, que proponemos aquí.

Cela Espín, X. i Revilla Calvo, V., Annexos de Jaume Buxeda i Garrigós i Miquel Ângel Cau Ontiveros; Mariana Pérez-Sala i Rodés; Eva Orri Terrado i Alicia Estrada Martín.: La transició del municipium d'Iluro a Alarona (Mataró). Cultura material i transformacions d"un espai urbà entre els segles V i VII dC. Laietania, 15, 2004

Aquest llibre reuneix un estudi arqueològic extraordinàriament acurat referit a tot un seguit d'actuacions detectades a partir del registre arqueològic, que caracteritzen l'espai urbà de l'antiga Iluro durant el període de l'Antiguitat tardana. S'hi estudia amb molt deteniment cadascuna de les accions detectades -així com tot el mobiliari ceràmic relacionat- amb la finalitat de situar-les correctament en el temps, però també per entendre, a través de la cultura material, la dinàmica que pren la ciutat a les darreries de l'Antiguitat; per a poder intuir, més que saber, quina societat es desenvolupa darrere d¿aquests contenidors plens de productes alimentaris arribats d¿un ultramar llunyà i alhora molt proper; una societat capaç de respondre a l¿estímul exterior amb una producció pròpia que competirà o substituirà una gran part de la que ve de fora.

The total material requirement -concept applied to agriculture : a case study from Finland

Selostus: Luonnonvarojen kokonaiskäyttö sovellettuna maatalouteen: esimerkki Suomesta

Monitoring detrital input and resuspension effects on sediment trap material using mineralogy and stable isotopes (δ18O and δ13C): the case of Lake Neuchatel (Switzerland)

Isotopic analyses on bulk carbonates are considered a useful tool for palaeoclimatic reconstruction assuming calcite precipitation occurring at oxygen isotope equilibrium with local water and detrital carbonate input being absent or insignificant. We present results from Lake Neuchatel (western Switzerland) that demonstrate equilibrium precipitation of calcite, except during high productivity periods, and the presence of detrital and resuspended calcite. Mineralogy, geochemistry and stable isotope values of Lake Neuchatel trap sediments and adjacent rivers suspension were studied. Mineralogy of suspended matter in the major inflowing rivers documents an important contribution of detrital carbonates, predominantly calcite with minor amounts of dolomite and ankerite. Using mineralogical data, the quantity of allochthonous calcite can be estimated by comparing the ratio ankerite + dolomite/calcite + ankerite + dolomite in the inflowing rivers and in the traps. Material taken from sediment traps shows an evolution from practically pure endogenic calcite in summer (10-20% detrital material) to higher percentages of detrital material in winter (up to 20-40%). Reflecting these mineralogical variations, delta(13)C and delta(18)O values of calcite from sediment traps are more negative in summer than in winter times. Since no significant variations in isotopic composition of lake water were detected over one year, factors controlling oxygen isotopic composition of calcite in sediment traps are the precipitation temperature, and the percentage of resuspended and detrital calcite. Samples taken close to the river inflow generally have higher delta values than the others, confirming detrital influence. SEM and isotopic studies on different size fractions (<2, 2-6, 6-20, 20-60, >60 mu m) of winter and summer samples allowed the recognition of resuspension and to separate new endogenic calcite from detrital calcite. Fractions >60 and (2 mu m have the highest percentage of detritus, Fractions 2-6 and 6-20 mu m are typical for the new endogenic calcite in summer, as given by calculations assuming isotopic equilibrium with local water. In winter such fractions show similar values than in summer, indicating resuspension. Using the isotopic composition of sediment traps material and of different size fractions, as well as the isotopic composition of lake water, the water temperature measurements and mineralogy, we re-evaluated the bulk carbonate potential for palaeoclimatic reconstruction in the presence of detrital and re-suspended calcite. This re-evaluation leads to the following conclusion: (1) the endogenic signal can be amplified by applying a particle-size separation, once the size of endogenic calcite is known from SEM study; (2) resuspended calcite does not alter the endogenic signal, but it lowers the time resolution; (3) detrital input decreases at increasing distances from the source, and it modifies the isotopic signal only when very abundant; (4) influence of detrital calcite on bulk sediment isotopic composition can be calculated. (C) 1998 Elsevier Science B.V. All rights reserved.

Variations on the nutritional status of eucalypt as influenced by the genetic material and age of tree

The Diagnosis and Recommendation System (DRIS) was applied to eucalypt trees (hybrids of Eucalyptus grandis x E. urophylla) with different ages and growing under different environmental conditions for three different clones. The basic data were obtained from 1,986 trees of commercial stands cultivated in the states of Espírito Santo and south Bahia, Brazil. The DRIS indices were calculated using the Beaufils' Range formula and grouped according to the Nutrient Application Potential Response method. The objective of this paper was to evaluate the N, P and Ca status in eucalypt trees, regarding the tree ages and genetic materials. The DRIS indices discriminated differences in the nutritional status of the trees, both in relation to age and the genetic materials (clones). The results indicated that the deficiency of N and Ca tended to decrease with tree age, whereas the P deficiency tended to increase. Furthermore, of the three evaluated clones, those numbered 00014 and 00034 showed opposite trends regarding to N, P, and Ca nutrition, and the clone numbered 00021, in general, presented the highest degree of unbalanced nutrition of N, P and Ca.

Análisis del formato del material educativo para la docencia de la estadística para psicólogos.

El objetivo del presente trabajo consistió en analizar la valoración que realizan los alumnos de la asignatura Análisi de Dades en Psicologia de los diferentes materiales puestos a su disposición para el proceso de enseñanza-aprendizaje de esta materia, con el fin último de poder facilitar al alumnado el material más adecuado para el fomento de su trabajo autónomo. Para ello se administró un cuestionario elaborado ad-hoc en el que se preguntó sobre el diferente tipo de material que tenían a su disposición los alumnos matriculados en esta asignatura en el primer semestre del curso académico 2008-09; en concreto se trabajó con una muestra de 391 estudiantes. Los resultados mostraron que el material mejor evaluado fue el tradicional, es decir, el formulario de la asignatura, el dossier de problemas junto con sus soluciones y las clases, tanto las magistrales como prácticas; en tanto que el material más basado en las nuevas tecnologías fue el peor valorado (CD-Roms interactivos, páginas Web, glosario generado por los alumnos en el campus virtual de la asignatura).

Análisis del material epigráfico

Forma part de: "Un conjunt de materials d'època tardo-republicana de la ciutat romana de Pollentia (Alcúdia, Mallorca)"

Evaluation of Crushed Limestone Rock as a Mulch Material, HR-171, 1975

Earthen fills and back slopes resulting from highway building and other construction projects pose problems with respect to erosion stabilization and establishing vegetation cover. Sediments from such slopes create stream pollution while the erosion itself results in maintenance problems. Furthermore, adverse conditions aggravated by erosion prevent satisfactory establishing of vegetative cover. A dense vegetative cover is very effective in controlling erosion but even with optimum weather and soil conditions there is a delay of about 10 weeks between seeding and the establishment of a vegetative cover. Under actual field conditions, 3 months to a year may elapse between completion of construction and establishment of a vegetative cover. A research project was initiated early in 1974 to determine the effectiveness of a rock mulch of crushed limestone aggregates in controlling soil losses on highway construction back slopes in Iowa and to find the influence of such treatments on stand establishment of grasses and legumes.

Performance of a chromatographic procedure used in the certification of reference material for polycyclic aromatic hydrocarbons in sewage sludge

Semi-automatic capillary gas chromatographic method with classical flame ionization detection, which satisfies the conditions for required performance and gave acceptable results within the framework of an interlaboratory certification programme for PAHs in sewage sludge, is described. The interesting feature of the procedure is that it incorporates automatic operations such as sample fractionation by semi-preparative HPLC, fraction collection at signal level recognition and evaporation under nitrogen flow. Multiple injections in the GC capillary column are performed in the on-column mode via an autosampler with temperature-programmable injector. Automatic data acquisition and chromatogram treatment are made via computer software. This partially automatic procedure releases personnel from tedious and time-consuming tasks and its robust character was validated through the certification of reference material for PAHs in sewage sludge, demonstrating its reliable performance.