957 resultados para linearity
Resumo:
Over-sampling sigma-delta analogue-to-digital converters (ADCs) are one of the key building blocks of state of the art wireless transceivers. In the sigma-delta modulator design the scaling coefficients determine the overall signal-to-noise ratio. Therefore, selecting the optimum value of the coefficient is very important. To this end, this paper addresses the design of a fourthorder multi-bit sigma-delta modulator for Wireless Local Area Networks (WLAN) receiver with feed-forward path and the optimum coefficients are selected using genetic algorithm (GA)- based search method. In particular, the proposed converter makes use of low-distortion swing suppression SDM architecture which is highly suitable for low oversampling ratios to attain high linearity over a wide bandwidth. The focus of this paper is the identification of the best coefficients suitable for the proposed topology as well as the optimization of a set of system parameters in order to achieve the desired signal-to-noise ratio. GA-based search engine is a stochastic search method which can find the optimum solution within the given constraints.
Resumo:
From the early stages of the twentieth century, polyaniline (PANI), a well-known and extensively studied conducting polymer has captured the attention of scientific community owing to its interesting electrical and optical properties. Starting from its structural properties, to the currently pursued optical, electrical and electrochemical properties, extensive investigations on pure PANI and its composites are still much relevant to explore its potentialities to the maximum extent. The synthesis of highly crystalline PANI films with ordered structure and high electrical conductivity has not been pursued in depth yet. Recently, nanostructured PANI and the nanocomposites of PANI have attracted a great deal of research attention owing to the possibilities of applications in optical switching devices, optoelectronics and energy storage devices. The work presented in the thesis is centered around the realization of highly conducting and structurally ordered PANI and its composites for applications mainly in the areas of nonlinear optics and electrochemical energy storage. Out of the vast variety of application fields of PANI, these two areas are specifically selected for the present studies, because of the following observations. The non-linear optical properties and the energy storing properties of PANI depend quite sensitively on the extent of conjugation of the polymer structure, the type and concentration of the dopants added and the type and size of the nano particles selected for making the nanocomposites. The first phase of the work is devoted to the synthesis of highly ordered and conducting films of PANI doped with various dopants and the structural, morphological and electrical characterization followed by the synthesis of metal nanoparticles incorporated PANI samples and the detailed optical characterization in the linear and nonlinear regimes. The second phase of the work comprises the investigations on the prospects of PANI in realizing polymer based rechargeable lithium ion cells with the inherent structural flexibility of polymer systems and environmental safety and stability. Secondary battery systems have become an inevitable part of daily life. They can be found in most of the portable electronic gadgets and recently they have started powering automobiles, although the power generated is low. The efficient storage of electrical energy generated from solar cells is achieved by using suitable secondary battery systems. The development of rechargeable battery systems having excellent charge storage capacity, cyclability, environmental friendliness and flexibility has yet to be realized in practice. Rechargeable Li-ion cells employing cathode active materials like LiCoO2, LiMn2O4, LiFePO4 have got remarkable charge storage capacity with least charge leakage when not in use. However, material toxicity, chance of cell explosion and lack of effective cell recycling mechanism pose significant risk factors which are to be addressed seriously. These cells also lack flexibility in their design due to the structural characteristics of the electrode materials. Global research is directed towards identifying new class of electrode materials with less risk factors and better structural stability and flexibility. Polymer based electrode materials with inherent flexibility, stability and eco-friendliness can be a suitable choice. One of the prime drawbacks of polymer based cathode materials is the low electronic conductivity. Hence the real task with this class of materials is to get better electronic conductivity with good electrical storage capability. Electronic conductivity can be enhanced by using proper dopants. In the designing of rechargeable Li-ion cells with polymer based cathode active materials, the key issue is to identify the optimum lithiation of the polymer cathode which can ensure the highest electronic conductivity and specific charge capacity possible The development of conducting polymer based rechargeable Li-ion cells with high specific capacity and excellent cycling characteristics is a highly competitive area among research and development groups, worldwide. Polymer based rechargeable batteries are specifically attractive due to the environmentally benign nature and the possible constructional flexibility they offer. Among polymers having electrical transport properties suitable for rechargeable battery applications, polyaniline is the most favoured one due to its tunable electrical conducting properties and the availability of cost effective precursor materials for its synthesis. The performance of a battery depends significantly on the characteristics of its integral parts, the cathode, anode and the electrolyte, which in turn depend on the materials used. Many research groups are involved in developing new electrode and electrolyte materials to enhance the overall performance efficiency of the battery. Currently explored electrolytes for Li ion battery applications are in liquid or gel form, which makes well-defined sealing essential. The use of solid electrolytes eliminates the need for containment of liquid electrolytes, which will certainly simplify the cell design and improve the safety and durability. The other advantages of polymer electrolytes include dimensional stability, safety and the ability to prevent lithium dendrite formation. One of the ultimate aims of the present work is to realize all solid state, flexible and environment friendly Li-ion cells with high specific capacity and excellent cycling stability. Part of the present work is hence focused on identifying good polymer based solid electrolytes essential for realizing all solid state polymer based Li ion cells.The present work is an attempt to study the versatile roles of polyaniline in two different fields of technological applications like nonlinear optics and energy storage. Conducting form of doped PANI films with good extent of crystallinity have been realized using a level surface assisted casting method in addition to the generally employed technique of spin coating. Metal nanoparticles embedded PANI offers a rich source for nonlinear optical studies and hence gold and silver nanoparticles have been used for making the nanocomposites in bulk and thin film forms. These PANI nanocomposites are found to exhibit quite dominant third order optical non-linearity. The highlight of these studies is the observation of the interesting phenomenon of the switching between saturable absorption (SA) and reverse saturable absorption (RSA) in the films of Ag/PANI and Au/PANI nanocomposites, which offers prospects of applications in optical switching. The investigations on the energy storage prospects of PANI were carried out on Li enriched PANI which was used as the cathode active material for assembling rechargeable Li-ion cells. For Li enrichment or Li doping of PANI, n-Butyllithium (n-BuLi) in hexanes was used. The Li doping as well as the Li-ion cell assembling were carried out in an argon filled glove box. Coin cells were assembled with Li doped PANI with different doping concentrations, as the cathode, LiPF6 as the electrolyte and Li metal as the anode. These coin cells are found to show reasonably good specific capacity around 22mAh/g and excellent cycling stability and coulombic efficiency around 99%. To improve the specific capacity, composites of Li doped PANI with inorganic cathode active materials like LiFePO4 and LiMn2O4 were synthesized and coin cells were assembled as mentioned earlier to assess the electrochemical capability. The cells assembled using the composite cathodes are found to show significant enhancement in specific capacity to around 40mAh/g. One of the other interesting observations is the complete blocking of the adverse effects of Jahn-Teller distortion, when the composite cathode, PANI-LiMn2O4 is used for assembling the Li-ion cells. This distortion is generally observed, near room temperature, when LiMn2O4 is used as the cathode, which significantly reduces the cycling stability of the cells.
Resumo:
This work presents Bayes invariant quadratic unbiased estimator, for short BAIQUE. Bayesian approach is used here to estimate the covariance functions of the regionalized variables which appear in the spatial covariance structure in mixed linear model. Firstly a brief review of spatial process, variance covariance components structure and Bayesian inference is given, since this project deals with these concepts. Then the linear equations model corresponding to BAIQUE in the general case is formulated. That Bayes estimator of variance components with too many unknown parameters is complicated to be solved analytically. Hence, in order to facilitate the handling with this system, BAIQUE of spatial covariance model with two parameters is considered. Bayesian estimation arises as a solution of a linear equations system which requires the linearity of the covariance functions in the parameters. Here the availability of prior information on the parameters is assumed. This information includes apriori distribution functions which enable to find the first and the second moments matrix. The Bayesian estimation suggested here depends only on the second moment of the prior distribution. The estimation appears as a quadratic form y'Ay , where y is the vector of filtered data observations. This quadratic estimator is used to estimate the linear function of unknown variance components. The matrix A of BAIQUE plays an important role. If such a symmetrical matrix exists, then Bayes risk becomes minimal and the unbiasedness conditions are fulfilled. Therefore, the symmetry of this matrix is elaborated in this work. Through dealing with the infinite series of matrices, a representation of the matrix A is obtained which shows the symmetry of A. In this context, the largest singular value of the decomposed matrix of the infinite series is considered to deal with the convergence condition and also it is connected with Gerschgorin Discs and Poincare theorem. Then the BAIQUE model for some experimental designs is computed and compared. The comparison deals with different aspects, such as the influence of the position of the design points in a fixed interval. The designs that are considered are those with their points distributed in the interval [0, 1]. These experimental structures are compared with respect to the Bayes risk and norms of the matrices corresponding to distances, covariance structures and matrices which have to satisfy the convergence condition. Also different types of the regression functions and distance measurements are handled. The influence of scaling on the design points is studied, moreover, the influence of the covariance structure on the best design is investigated and different covariance structures are considered. Finally, BAIQUE is applied for real data. The corresponding outcomes are compared with the results of other methods for the same data. Thereby, the special BAIQUE, which estimates the general variance of the data, achieves a very close result to the classical empirical variance.
Resumo:
In dieser Arbeit wurde das Adsorptionsverhalten zweier azobenzolfunktionalisierter Liganden auf Goldoberflächen untersucht. Diese Liganden zeichnen sich dadurch aus, dass sie mithilfe von Licht bestimmter Wellenlängen zwischen zwei Isomerisierungszuständen – sowohl in Lösung als auch in den auf der Oberfläche resultierenden Monolage – hin und her geschaltet werden können. Somit ist es möglich, Oberflächen herzustellen, deren physikalische und chemische Eigenschaften zwischen zwei Zuständen variiert werden können. Die Messungen des Adsorptionsverhaltens wurden mittels optischer Frequenzverdopplung durchgeführt. Diese Messmethode ist höchst grenzflächensensitiv und ermöglicht es somit die Adsorption der Liganden in situ und ich Echtzeit zu verfolgen. Neben den Adsorptionsmessungen wurde auch die Phase des frequenzverdoppelten Signals über eine Interferenzmethode gemessen. Die Ergebnisse dieser Phasenmessungen ermöglichen es, eine Aussage über eine mögliche Nichtlinearität der untersuchten Moleküle zu treffen. An die in den Adsorptionsmessungen gewonnenen Messdaten wurden drei kinetische Standardmodelle angepasst. Beschreibt eines dieser Modelle den im Experiment bestimmten Adsorptionsverlauf, kann eine Aussage über die zugrunde liegenden Prozesse des Adsorptionsvorganges getroffen werden. Die Ergebnisse der Adsorptionsmessungen zeigen einen deutlichen Einfluss des Isomerisierungszustandes der Liganden auf den Verlauf der Adsorption. Liegen die Moleküle im geschalteten Zustand vor, so verläuft die Adsorption langsamer. Weiterhin konnte gezeigt werden, dass ebenso intermolekulare Wechselwirkungen über Wasserstoffbrückenbindungen einen verlangsamenden Einfluss auf die Adsorption der Liganden haben. In den durchgeführten Phasenmessungen zeigte sich darüber hinaus, dass Liganden, die über an die Azobenzolgruppe angebundene Amidgruppen verfügen, eine Nichtlinearität aufweisen. Diese Nichtlinearität ist zudem vom Isomerisierungszustand der Liganden abhängig. In den kinetischen Untersuchungen konnte darüber hinaus gezeigt werden, dass sich die Adsorption der Liganden bis auf eine Ausnahme durch die Langmuirkinetik 2. Ordnung beschreiben lässt. Somit handelt es ich bei der Adsorption der untersuchten Liganden um eine Reaktion, der eine Bindungsspaltung voran geht. Dieser Befund konnte durch Vergleich mit weiteren Experimenten bestätigt werden.
Resumo:
The rapid growth in high data rate communication systems has introduced new high spectral efficient modulation techniques and standards such as LTE-A (long term evolution-advanced) for 4G (4th generation) systems. These techniques have provided a broader bandwidth but introduced high peak-to-average power ratio (PAR) problem at the high power amplifier (HPA) level of the communication system base transceiver station (BTS). To avoid spectral spreading due to high PAR, stringent requirement on linearity is needed which brings the HPA to operate at large back-off power at the expense of power efficiency. Consequently, high power devices are fundamental in HPAs for high linearity and efficiency. Recent development in wide bandgap power devices, in particular AlGaN/GaN HEMT, has offered higher power level with superior linearity-efficiency trade-off in microwaves communication. For cost-effective HPA design to production cycle, rigorous computer aided design (CAD) AlGaN/GaN HEMT models are essential to reflect real response with increasing power level and channel temperature. Therefore, large-size AlGaN/GaN HEMT large-signal electrothermal modeling procedure is proposed. The HEMT structure analysis, characterization, data processing, model extraction and model implementation phases have been covered in this thesis including trapping and self-heating dispersion accounting for nonlinear drain current collapse. The small-signal model is extracted using the 22-element modeling procedure developed in our department. The intrinsic large-signal model is deeply investigated in conjunction with linearity prediction. The accuracy of the nonlinear drain current has been enhanced through several issues such as trapping and self-heating characterization. Also, the HEMT structure thermal profile has been investigated and corresponding thermal resistance has been extracted through thermal simulation and chuck-controlled temperature pulsed I(V) and static DC measurements. Higher-order equivalent thermal model is extracted and implemented in the HEMT large-signal model to accurately estimate instantaneous channel temperature. Moreover, trapping and self-heating transients has been characterized through transient measurements. The obtained time constants are represented by equivalent sub-circuits and integrated in the nonlinear drain current implementation to account for complex communication signals dynamic prediction. The obtained verification of this table-based large-size large-signal electrothermal model implementation has illustrated high accuracy in terms of output power, gain, efficiency and nonlinearity prediction with respect to standard large-signal test signals.
Resumo:
The identification of chemical mechanism that can exhibit oscillatory phenomena in reaction networks are currently of intense interest. In particular, the parametric question of the existence of Hopf bifurcations has gained increasing popularity due to its relation to the oscillatory behavior around the fixed points. However, the detection of oscillations in high-dimensional systems and systems with constraints by the available symbolic methods has proven to be difficult. The development of new efficient methods are therefore required to tackle the complexity caused by the high-dimensionality and non-linearity of these systems. In this thesis, we mainly present efficient algorithmic methods to detect Hopf bifurcation fixed points in (bio)-chemical reaction networks with symbolic rate constants, thereby yielding information about their oscillatory behavior of the networks. The methods use the representations of the systems on convex coordinates that arise from stoichiometric network analysis. One of the methods called HoCoQ reduces the problem of determining the existence of Hopf bifurcation fixed points to a first-order formula over the ordered field of the reals that can then be solved using computational-logic packages. The second method called HoCaT uses ideas from tropical geometry to formulate a more efficient method that is incomplete in theory but worked very well for the attempted high-dimensional models involving more than 20 chemical species. The instability of reaction networks may lead to the oscillatory behaviour. Therefore, we investigate some criterions for their stability using convex coordinates and quantifier elimination techniques. We also study Muldowney's extension of the classical Bendixson-Dulac criterion for excluding periodic orbits to higher dimensions for polynomial vector fields and we discuss the use of simple conservation constraints and the use of parametric constraints for describing simple convex polytopes on which periodic orbits can be excluded by Muldowney's criteria. All developed algorithms have been integrated into a common software framework called PoCaB (platform to explore bio- chemical reaction networks by algebraic methods) allowing for automated computation workflows from the problem descriptions. PoCaB also contains a database for the algebraic entities computed from the models of chemical reaction networks.
Resumo:
Linear graph reduction is a simple computational model in which the cost of naming things is explicitly represented. The key idea is the notion of "linearity". A name is linear if it is only used once, so with linear naming you cannot create more than one outstanding reference to an entity. As a result, linear naming is cheap to support and easy to reason about. Programs can be translated into the linear graph reduction model such that linear names in the program are implemented directly as linear names in the model. Nonlinear names are supported by constructing them out of linear names. The translation thus exposes those places where the program uses names in expensive, nonlinear ways. Two applications demonstrate the utility of using linear graph reduction: First, in the area of distributed computing, linear naming makes it easy to support cheap cross-network references and highly portable data structures, Linear naming also facilitates demand driven migration of tasks and data around the network without requiring explicit guidance from the programmer. Second, linear graph reduction reveals a new characterization of the phenomenon of state. Systems in which state appears are those which depend on certain -global- system properties. State is not a localizable phenomenon, which suggests that our usual object oriented metaphor for state is flawed.
Resumo:
Evolution of compositions in time, space, temperature or other covariates is frequent in practice. For instance, the radioactive decomposition of a sample changes its composition with time. Some of the involved isotopes decompose into other isotopes of the sample, thus producing a transfer of mass from some components to other ones, but preserving the total mass present in the system. This evolution is traditionally modelled as a system of ordinary di erential equations of the mass of each component. However, this kind of evolution can be decomposed into a compositional change, expressed in terms of simplicial derivatives, and a mass evolution (constant in this example). A rst result is that the simplicial system of di erential equations is non-linear, despite of some subcompositions behaving linearly. The goal is to study the characteristics of such simplicial systems of di erential equa- tions such as linearity and stability. This is performed extracting the compositional dif ferential equations from the mass equations. Then, simplicial derivatives are expressed in coordinates of the simplex, thus reducing the problem to the standard theory of systems of di erential equations, including stability. The characterisation of stability of these non-linear systems relays on the linearisation of the system of di erential equations at the stationary point, if any. The eigenvelues of the linearised matrix and the associated behaviour of the orbits are the main tools. For a three component system, these orbits can be plotted both in coordinates of the simplex or in a ternary diagram. A characterisation of processes with transfer of mass in closed systems in terms of stability is thus concluded. Two examples are presented for illustration, one of them is a radioactive decay
Resumo:
La presenta monografía constituye una profundización y ampliación en tres temas de interés: Cultura corporativa, ciencias de la complejidad y desempeño organizacional. Partiendo de un trabajo inicial que realiza una descripción de los anteriores conceptos y sus posibles relaciones, este trabajo resulta ser la continuación y adición de nuevas perspectivas con el fin de generar mayores aportes en el mundo académico y empresarial. Comienza con la Cultura corporativa y la identificación de sus componentes visibles, conjuntamente con una reflexión sobre este concepto como factor para la transformación y la aceptación del cambio en las organizaciones. Luego, retoma conceptos importantes en las Ciencias de la Complejidad y la teoría de sistemas como lo son los agentes, atractores, la no-linealidad y la auto-organización. Además se hace una revisión de los antecedentes y medidas actuales del desempeño organizacional, configurando al Alfa de Jensen como posible candidato para medir el impacto de la cultura corporativa manteniendo lo principios de las Ciencias de la complejidad.
Resumo:
El interés de esta monografía es analizar las interacciones no-lineales con resultados emergentes que mantuvo la comunidad kurda en Siria, durante el periodo 2011-2014, y por las cuales se produjeron formas de auto-organización como resultado de la estructura compleja a la que pertenece. De esta forma, se explica cómo a raíz de la crisis política siria y los enfrentamientos con el Estado Islámico, se transformó el rol de los kurdos en Siria y se influenciaron las estructuras políticas del país y las naciones de la región con población kurda. Por lo tanto, esta investigación se propone analizar este fenómeno a través del enfoque de complejidad en Relaciones Internacionales y el concepto de Auto-Organización. A partir de ello, se indaga sobre las interacciones surgidas en estructuras más pequeñas, que habrían afectado un sistema mayor; estableciendo nuevas formas de organización que no pueden ser explicadas, únicamente, a partir de elementos causales.
Resumo:
L'ús d'esperma criopreservada en la inseminació artificial (IA) d'espècies d'interès productiu permet un major control sanitari i la creació de bancs de germoplasma d'alt valor genètic, entre d'altres avantatges. En el mercat porcí la major part de les inseminacions són encara realitzades amb semen refrigerat degut a l'èxit de l'aplicació de diluents de llarga durada i també a causa de la sensibilitat de l'esperma porcina a la criopreservació. Malgrat que aquesta sensibilitat ve donada per característiques particulars de la fisiologia espermàtica en l'espècie, algunes ejaculacions mantenen els paràmetres de qualitat espermàtica després de la criopreservació (ejaculacions amb bona "congelabilitat", GFEs) enfront d'altres que no sobreviuen al procés (ejaculacions amb mala "congelabilitat", PFEs). El primer objectiu de l'estudi va ser comparar ambdós grups en termes de fertilitat in vivo. El segon objectiu va ser testar l'eficiència de la inseminació postcervical (post-CAI) amb l'esperma criopreservada. El tercer objectiu va ser buscar predictors de la congelabilitat de les ejaculacions, tant en les GFEs com en les PFEs i en tres passos del procés de criopreservació (a 17ºC, a 5ºC i a 240 min postdescongelació). Aquest objectiu es va dur a terme mitjançant l'avaluació de paràmetres convencionals de qualitat espermàtica i a través de l'estudi de la localització i la reactivitat sota el microscopi de tres proteïnes (GLUT3, HSP90AA1 i Cu/ZnSOD) relacionades amb la fisiologia espermàtica i amb possibles rols en la congelabilitat. El quart objectiu va ser quantificar l'expressió de les tres proteïnes per transferència western, tant en espermatozoides d'ejaculacions GFEs com en els d'ejaculacions PFEs i en els tres passos abans esmentats, per tal de determinar el seu potencial com a predictores de la congelabilitat. Pel primer i el segon objectiu, 86 truges van ser inseminades per post-CAI amb 26 ejaculacions de mascles Piétrain dividides en una porció refrigerada a 17ºC (tractament control) i una porció criopreservada, ambdues porcions classificades alhora com a GFEs o PFEs. Els resultats més rellevants van demostrar que les probabilitats d'embaràs eren dues vegades menors en inseminacions amb esperma criopreservada d'ejaculacions PFEs (P < 0.05) que en inseminacions amb esperma criopreservada d'ejaculacions GFEs, fet que indica que les ejaculacions amb percentatges elevats d'espermatozoides mòbils progressius i d'integritat de membrana (per sobre del 40% en les GFEs) són més favorables a provocar embarassos que no pas aquelles ejaculacions amb una pobra funció espermàtica in vitro (PFEs). Ni el nombre de truges que van donar a llum, ni la quantitat de garrins, ni el risc de reflux espermàtic van ser significativament diferents entre les inseminacions amb esperma criopreservada d'ejaculacions GFEs i les inseminacions control amb semen refrigerat, la qual cosa demostra la bona aplicabilitat de la inseminació post-CAI amb l'esperma criopreservada. Finalment, pel tercer i quart objectius van ser criopreservades 29 i 11 ejaculacions de mascles Piétrain, respectivament. Dos paràmetres cinètics espermàtics, la linealitat (LIN) i la rectitud (STR), van mostrar una hiperactivació de la mobilitat superior en les ejaculacions PFEs que en les GFEs després de 30 min a 5ºC durant la criopreservació. A més, la combinació d'ambdós paràmetres va donar una fiabilitat propera al 72% en la predicció de la congelabilitat de les ejaculacions porcines. Tot i que no va ser possible predir la congelabilitat mitjançant l'avaluació de les tres proteïnes al microscopi, els resultats de transferència western van revelar diferències en l'expressió de la HSP90AA1 en l'esperma a 17ºC, molt possiblement relacionades amb la millor supervivència a la criopreservació dels espermatozoides d'ejaculacions GFEs. Aquests resultats suggereixen que la promoció de la criopreservació d'esperma porcina per la seva aplicació en IA passa pel desenvolupament de tests per la predicció de la congelabilitat en semen refrigerat.
Resumo:
El benestar psicològic, entès com la vessant psicològica que forma part del concepte més ampli de qualitat de vida, constitueix un àmbit d'estudi en expansió. Tot i tenir un passat més breu en comparació amb d'altres constructes psicosocials, cada vegada investigadors de les més diverses disciplines s'afegeixen a la llista d'estudiosos que fan del benestar psicològic un dels seus objectes d'investigació. Amb tot, l'estudi del benestar psicològic en l'adolescència constitueix probablement un dels àmbits en els quals la necessitat de seguir avançant es fa més evident. El seu estudi en subjectes adolescents té, a més, un doble interès. Per una part, els canvis i transicions que nois i noies experimenten durant l'adolescència comporten amb freqüència que sigui un període estressant per a molts d'ells/es, amb implicacions importants per al seu benestar psicològic. Aprofundir en el seu coneixement durant aquest període té un interès més enllà de l'estrictament científic i permet el disseny de programes de prevenció més ajustats a les problemàtiques que els/les adolescents puguin estar experimentant. L'exploració dels elements del benestar psicològic constitueix una de les estratègies d'aproximació al seu estudi. En aquesta tesi doctoral s'han seleccionat alguns dels elements que de la literatura científica es desprèn que tenen una connexió més estreta amb el benestar psicològic i que són la satisfacció amb la vida globalment i amb àmbits específics de la vida, l'autoestima, el suport social percebut, la percepció de control i els valors. Tot i que existeix un consens elevat en considerar que l'exploració d'aquests elements és de primera necessitat de cares a aprofundir en l'estructura del benestar psicològic, generalment han estat estudiats de forma separada, malgrat no falten intents d'integració teòrica. Les limitacions més importants que presenta l'estudi del benestar psicològic i el dels seus elements en l'actualitat són bàsicament de caràcter epistemològic i fan referència a la dificultat de trobar visions comunes (tant a nivell de definicions com de teories explicatives) compartides per una majoria d'investigadors socials. Aquestes limitacions justifiquen l'interès per dirigir l'atenció vers un altre tipus d'explicacions del benestar psicològic, qualitativament diferents a les disponibles, que no es refugiïn ni en reduccionismes ni en explicacions causals rígides. Les teories de la complexitat suposen una alternativa productiva en aquest sentit ja que aquelles característiques a través de les quals la complexitat ve donada (borrositat de límits, punts de catàstrofe, dimensions fractals, processos caòtics i no lineals), són, en definitiva, les mateixes propietats que caracteritzen als fenòmens psicosocials. I això inclou el de benestar psicològic. Les dades de les que disposem, obtingudes mitjançant un estudi transversal, impedeixen fer una aproximació al benestar psicològic des de totes les propietats de la complexitat esmentades a excepció de la característica de la no linealitat. L'objectiu general de la tesi ha estat el de construir un model de benestar psicològic a partir de les dades obtingudes que permetés: 1) Evidenciar relacions entre variables que fins aquests moments no han pogut ser massa explorades, 2) Contemplar aquestes relacions més enllà de la seva unidireccionalitat, i 3) Entendre el benestar psicològic en l'adolescència des d'un punt de vista més integrador i holista i, consegüentment, oferir una manera més comprehensiva d'aproximar-se a aquest fenomen. Aquesta tesi ha de ser entesa com un primer pas, fonamentalment metodològic, per l'elaboració futura de conceptualizacions sobre el benestar psicològic en l'adolescència que es basin en els principis que ens aporten les ciències de la complexitat. Malgrat els resultats obtinguts no estan absents de limitacions, obren noves perspectives d'anàlisi del benestar psicològic en l'adolescència.
Resumo:
The land/sea warming contrast is a phenomenon of both equilibrium and transient simulations of climate change: large areas of the land surface at most latitudes undergo temperature changes whose amplitude is more than those of the surrounding oceans. Using idealised GCM experiments with perturbed SSTs, we show that the land/sea contrast in equilibrium simulations is associated with local feedbacks and the hydrological cycle over land, rather than with externally imposed radiative forcing. This mechanism also explains a large component of the land/sea contrast in transient simulations as well. We propose a conceptual model with three elements: (1) there is a spatially variable level in the lower troposphere at which temperature change is the same over land and sea; (2) the dependence of lapse rate on moisture and temperature causes different changes in lapse rate upon warming over land and sea, and hence a surface land/sea temperature contrast; (3) moisture convergence over land predominantly takes place at levels significantly colder than the surface; wherever moisture supply over land is limited, the increase of evaporation over land upon warming is limited, reducing the relative humidity in the boundary layer over land, and hence also enhancing the land/sea contrast. The non-linearity of the Clausius–Clapeyron relationship of saturation specific humidity to temperature is critical in (2) and (3). We examine the sensitivity of the land/sea contrast to model representations of different physical processes using a large ensemble of climate model integrations with perturbed parameters, and find that it is most sensitive to representation of large-scale cloud and stomatal closure. We discuss our results in the context of high-resolution and Earth-system modelling of climate change.
Resumo:
Investigation of preferred structures of planetary wave dynamics is addressed using multivariate Gaussian mixture models. The number of components in the mixture is obtained using order statistics of the mixing proportions, hence avoiding previous difficulties related to sample sizes and independence issues. The method is first applied to a few low-order stochastic dynamical systems and data from a general circulation model. The method is next applied to winter daily 500-hPa heights from 1949 to 2003 over the Northern Hemisphere. A spatial clustering algorithm is first applied to the leading two principal components (PCs) and shows significant clustering. The clustering is particularly robust for the first half of the record and less for the second half. The mixture model is then used to identify the clusters. Two highly significant extratropical planetary-scale preferred structures are obtained within the first two to four EOF state space. The first pattern shows a Pacific-North American (PNA) pattern and a negative North Atlantic Oscillation (NAO), and the second pattern is nearly opposite to the first one. It is also observed that some subspaces show multivariate Gaussianity, compatible with linearity, whereas others show multivariate non-Gaussianity. The same analysis is also applied to two subperiods, before and after 1978, and shows a similar regime behavior, with a slight stronger support for the first subperiod. In addition a significant regime shift is also observed between the two periods as well as a change in the shape of the distribution. The patterns associated with the regime shifts reflect essentially a PNA pattern and an NAO pattern consistent with the observed global warming effect on climate and the observed shift in sea surface temperature around the mid-1970s.