Escola Nacional de Educação Fisica e Desportos : uma possivel historia

Universidade Estadual de Campinas . Faculdade de Educação Física

Da avaliação a gestão de processo : uma proposta de instrumento para acompanhamento da inclusão contextualizada no transcorrer de atividades motoras

Universidade Estadual de Campinas . Faculdade de Educação Física

Effects of the condylar process fracture on facial symmetry in rats submitted to protein undernutrition

PURPOSE: To investigate the facial symmetry of rats submitted to experimental mandibular condyle fracture and with protein undernutrition (8% of protein) by means of cephalometric measurements. METHODS: Forty-five adult Wistar rats were distributed in three groups: fracture group, submitted to condylar fracture with no changes in diet; undernourished fracture group, submitted to hypoproteic diet and condylar fracture; undernourished group, kept until the end of experiment, without condylar fracture. Displaced fractures of the right condyle were induced under general anesthesia. The specimens were submitted to axial radiographic incidence, and cephalometric mensurations were made using a computer system. The values obtained were subjected to statistical analyses among the groups and between the sides in each group. RESULTS: There was significative decrease of the values of serum proteins and albumin in the undernourished fracture group. There was deviation of the median line of the mandible relative to the median line of the maxilla, significative to undernutrition fracture group, as well as asymmetry of the maxilla and mandible, in special in the final period of experiment. CONCLUSION: The mandibular condyle fracture in rats with proteic undernutrition induced an asymmetry of the mandible, also leading to consequences in the maxilla.

Influence of specimens' design and manufacturing process on microtensile bond strength to enamel: laboratory and FEA comparison

This study evaluated the effect of specimens' design and manufacturing process on microtensile bond strength, internal stress distributions (Finite Element Analysis - FEA) and specimens' integrity by means of Scanning Electron Microscopy (SEM) and Laser Scanning Confocal Microscopy (LCM). Excite was applied to flat enamel surface and a resin composite build-ups were made incrementally with 1-mm increments of Tetric Ceram. Teeth were cut using a diamond disc or a diamond wire, obtaining 0.8 mm² stick-shaped specimens, or were shaped with a Micro Specimen Former, obtaining dumbbell-shaped specimens (n = 10). Samples were randomly selected for SEM and LCM analysis. Remaining samples underwent microtensile test, and results were analyzed with ANOVA and Tukey test. FEA dumbbell-shaped model resulted in a more homogeneous stress distribution. Nonetheless, they failed under lower bond strengths (21.83 ± 5.44 MPa)c than stick-shaped specimens (sectioned with wire: 42.93 ± 4.77 MPaª; sectioned with disc: 36.62 ± 3.63 MPa b), due to geometric irregularities related to manufacturing process, as noted in microscopic analyzes. It could be concluded that stick-shaped, nontrimmed specimens, sectioned with diamond wire, are preferred for enamel specimens as they can be prepared in a less destructive, easier, and more precise way.

Effect of nitric oxide inhibitor and donor substances on the infammatory process caused by endodontic irrigants

Nitric oxide (NO) has been considered a key molecule in infammation. OBJECTIVE: The aim of this study was to evaluate the effect of treatment with L-NAME and sodium nitroprussiate, substances that inhibit and release NO, respectively, on tissue tolerance to endodontic irrigants. MATERIAL AND METHODS: The vital dye exudation method was used in a rat subcutaneous tissue model. Injections of 2% Evans blue were administered intravenously into the dorsal penial vein of 14 male rats (200-300 g). The NO inhibitor and donor substances were injected into the subcutaneous tissue in the dorsal region, forming two groups of animals: G1 was inoculated with L-NAME and G2 with sodium nitroprussiate. Both groups received injections of the test endodontic irrigants: acetic acid, 15% citric acid, 17% EDTA-T and saline (control). After 30 min, analysis of the extravasated dye was performed by light absorption spectrophotometry (620 nm). RESULTS: There was statistically signifcant difference (p<0.05) between groups 1 and 2 for all irrigants. L-NAME produced a less intense infammatory reaction and nitroprussiate intensifed this process. CONCLUSIONS: Independently of the administration of NO inhibitors and donors, EDTA-T produced the highest irritating potential in vital tissue among the tested irrigating solutions.

Alveolar osseous defect in rat for cell therapy: preliminary report

PURPOSE: To study were to reproduce an alveolar bone defect model in Wistar rats to be used for testing the efficacy of stem cell therapies. Additionally, we also aimed to determine the osteogenesis process of this osseous defect in the 1 month period post-surgery. METHODS: The animals were randomly divided into two groups of 7 animals each. A gingivobuccal incision was made, and a bone defect of 28 mm² of area was performed in the alveolar region. Animals were killed at 2 weeks after surgery (n=7) and 4 weeks after surgery (n=7). RESULTS: The average area of the alveolar defect at time point of 2 weeks was 22.27 ± 1.31 mm² and the average area of alveolar defect at time point of 4 weeks was 9.03 ± 1.17 mm². The average amount of bone formation at time point of 2 weeks was 5.73 ± 1.31 mm² and the average amount of bone formation at time point of 4 weeks was 19 ± 1.17 mm². Statistically significant differences between the amount of bone formation at 2 weeks and 4 weeks after surgery were seen (p=0.003). CONCLUSION: The highest rate of ossification occurred mostly from 2 to 4 weeks after surgery. This observation suggests that 4 weeks after the bone defect creation should be a satisfactory timing to assess the potential of bone inductive stem cells to accelerate bone regeneration in Wistar rats.

Dependence of the crossover exponent with the diffusion rate in the generalized contact process model

We study how the crossover exponent, phi, between the directed percolation (DP) and compact directed percolation (CDP) behaves as a function of the diffusion rate in a model that generalizes the contact process. Our conclusions are based in results pointed by perturbative series expansions and numerical simulations, and are consistent with a value phi = 2 for finite diffusion rates and phi = 1 in the limit of infinite diffusion rate.

Transmissão psíquica transgeracional e construção de subjetividade: relato de uma psicoterapia psicanalítica vincular

O presente artigo tem como objetivo refletir acerca do conceito de transmissão psíquica entre gerações, especificamente de uma modalidade - a transmissão psíquica transgeracional - e sua influência na construção das subjetividades individuais e dos vínculos familiares, enfatizando-se aqui o vínculo mãe-filha como gerador de sintomas na criança e conflitos no âmbito familiar, através de um relato clínico de uma psicoterapia psicanalítica vincular, segundo os referenciais de Eiguer (2006) e Berenstein e Puget (1997, 2005). A apresentação do caso clínico permite discutir, ainda, a relação entre a transmissão psíquica transgeracional e o estabelecimento da “maternagem”, bem como os resultados obtidos ao longo de todo o processo psicoterápico. A finalidade desse espaço terapêutico familiar é a de propiciar transformações frente ao legado geracional, promovendo o surgimento de uma subjetividade nova, impulsionadora de vida.

Screening process for activity determination of conductive oxide electrodes for organic oxidation

A modified method for the calculation of the normalized faradaic charge (q fN) is proposed. The method involves the simulation of an oxidation process, by cyclic voltammetry, by employing potentials in the oxygen evolution reaction region. The method is applicable to organic species whose oxidation is not manifested by a defined oxidation peak at conductive oxide electrodes. The variation of q fN for electrodes of nominal composition Ti/RuX Sn1-X O2 (x = 0.3, 0.2 and 0.1), Ti/Ir0.3Ti0.7O2 and Ti/Ru0.3Ti0.7O2 in the presence of various concentrations of formaldehyde was analyzed. It was observed that electrodes containing SnO2 are the most active for formaldehyde oxidation. Subsequently, in order to test the validity of the proposed model, galvanostatic electrolyses (40 mA cm-2) of two different formaldehyde concentrations (0.10 and 0.01 mol dm-3) were performed. The results are in agreement with the proposed model and indicate that this new method can be used to determine the relative activity of conductive oxide electrodes. In agreement with previous studies, it can be concluded that not only the nature of the electrode material, but also the organic species in solution and its concentration are important factors to be considered in the oxidation of organic compounds.

Spectroscopic characterization and investigation of the dynamic of charge compensation process of supramolecular films derived from tetra-2-pyridyl-1,4-pyrazine ligand

This work describes the infrared spectroscopy characterization and the charge compensation dynamics in supramolecular film FeTPPZFeCN derived from tetra-2-pyridyl-1,4-pyrazine (TPPZ) with hexacyanoferrate, as well as the hybrid film formed by FeTPPZFeCN and polypyrrole (PPy). For supramolecular film, it was found that anion flux is greater in a K+ containing solution than in Li+ solution, which seems to be due to the larger crystalline ionic radius of K+. The electroneutralization process is discussed in terms of electrostatic interactions between cations and metallic centers in the hosting matrix. The nature of the charge compensation process differs from others modified electrodes based on Prussian blue films, where only cations such as K+ participate in the electroneutralization process. In the case of FeTPPZFeCN/PPy hybrid film, the magnitude of the anions’s flux is also dependent on the identity of the anion of the supporting electrolyte.

Novas perspectivas na gestão do sistema de saúde da Espanha

Ao longo dos últimos vinte e cinco anos, a organização do sistema de saúde na Espanha vem adotando diversas medidas que reorientaram seu gerenciamento, melhoraram sua eficiência e aprimoraram seu sistema de financiamento, resultado de profundas reformas e da introdução de novos instrumentos de gestão. Este artigo é resultado de uma análise documental que objetivou descrever a trajetória de conformação do sistema de saúde espanhol e sua organização na contemporaneidade. Apresenta alguns determinantes históricos que tornaram possíveis as reformas no setor sanitário, como a descentralização para o nível das Comunidades Autônomas, a incorporação de mecanismos de coordenação e a integração e o financiamento dos novos e distintos formatos organizativos coexistentes no país. Além disso, identifica desafios que emergem no cenário atual do Sistema Nacional de Saúde, como o fenômeno da imigração, o avançado processo de transição demográfica, a crescente demanda por melhorias na qualidade da atenção e de incorporação tecnológica. Todos esses fatores influem na sustentabilidade do sistema, o que motivou a criação de mais um espaço para estabelecimentos de consensos sobre o papel fundamental do sistema sanitário para o Estado de Bem-Estar espanhol.

Saúde bucal em Diadema: da odontologia escolar à estratégia saúde da família

Embora a política de saúde bucal no Município de Diadema, SP, no período de 1972 a 2007, objeto deste artigo, tenha acompanhado o processo de transformação das práticas do setor no Brasil, sua evolução nesta cidade industrial na Região Metropolitana da Grande São Paulo foi marcada pela singularidade do processo histórico local. Neste artigo analisa-se essa evolução, relacionando-a com o processo de lutas sociais que levou à criação do Sistema Único de Saúde (SUS) e com as políticas nacionais, estaduais e municipais de saúde bucal. Trata-se de um estudo qualitativo do tipo exploratório. Os dados foram obtidos em documentos oficiais e fontes bibliográficas variadas e por meio de entrevistas semiestruturadas com prefeitos, secretários municipais de saúde, coordenadores de saúde bucal e cirurgiões dentistas que vivenciaram as diversas fases das políticas de saúde bucal no município. Identificam-se as características mais marcantes na organização das práticas assistenciais em saúde desenvolvidas na cidade, localizando-as no cenário estadual e nacional. Conclui-se que, não obstante a consolidação da inserção da saúde bucal no SUS e a experiência adquirida no Município com a gestão dessa modalidade assistencial, também em Diadema observam-se dificuldades para superar o modelo de atenção focado nos grupos populacionais tradicionalmente priorizados, com destaque para escolares, pré-escolares e bebês. Nesse sentido, Diadema compartilha com os demais municípios brasileiros o desafio de reestruturar a atenção básica em saúde bucal, superar o tradicional modelo da odontologia escolar e criar novas possibilidades, como a abordagem familiar, com a finalidade de assegurar a universalidade e a integralidade da atenção.

A gestão do conhecimento na educação ambiental

Information and knowledge are resources of environmental education (EE) that can be performed through knowledge management (KM). The aim of this paper is to propose measures of knowledge creation (KC) to improve performance of EE. This study is based on the research literature without empirical findings; therefore, the results are limited by the methodological resources of the theoretical essay. However, this limitation is the greatest motivation for future research which could investigate the proximity of EE with KM and KC in empirical investigations. Some suggestions for developing the requirements of KC programs to EE are presented as the results: possibility of the SECI process to better perform various aspects of environmental education such as social learning, interaction activities, dialogue, experience exchanging, information and knowledge, and of different ideas and ways of acting, done by EE and, finally, the possibility of Ba to develop a proper space for creation of new environmental knowledge. This article contains academic contributions to KM by providing greater discussion and understanding of KC; to EE when it allows a different view based on the work of information and knowledge about the processes of teaching, when contributing to social programs for EE, improving their practices and, consequently, contributing to an environmentally sustainable economic development.

Architecture for machining process and production monitoring based in open computer numerical control

This paper proposes an architecture for machining process and production monitoring to be applied in machine tools with open Computer numerical control (CNC). A brief description of the advantages of using open CNC for machining process and production monitoring is presented with an emphasis on the CNC architecture using a personal computer (PC)-based human-machine interface. The proposed architecture uses the CNC data and sensors to gather information about the machining process and production. It allows the development of different levels of monitoring systems with mininium investment, minimum need for sensor installation, and low intrusiveness to the process. Successful examples of the utilization of this architecture in a laboratory environment are briefly described. As a Conclusion, it is shown that a wide range of monitoring solutions can be implemented in production processes using the proposed architecture.

Bond Strength of Multicomponent White Cast Iron Coatings Applied by HVOF Thermal Spray Process

Multicomponent white cast iron is a new alloy that belongs to system Fe-C-Cr-W-Mo-V, and because of its excellent wear resistance it is used in the manufacture of hot rolling mills rolls. To date, this alloy has been processed by casting, powder metallurgy, and spray forming. The high-velocity oxyfuel process is now also considered for the manufacture of components with this alloy. The effects of substrate, preheating temperature, and coating thickness on bond strength of coatings have been determined. Substrates of AISI 1020 steel and of cast iron with preheating of 150 A degrees C and at room temperature were used to apply coatings with 200 and 400 mu m nominal thickness. The bond strength of coatings was measured with the pull-off test method and the failure mode by scanning electron microscopic analysis. Coatings with thickness of 200 mu m and applied on substrates of AISI 1020 steel with preheating presented bond strength of 87 +/- A 4 MPa.