Solid polymer electrolytes based on chitosan and europium triflate

Solid polymer electrolytes (SPEs) were obtained from chitosan plasticized with glycerol and contained europium (III) trifluoromethanesulfonate salt. The transparent samples were characterized by thermal analysis (DSC and TGA), impedance spectroscopy and electron paramagnetic resonance (EPR). The sample with 55.34 wt.% of europium triflate showed the best ionic conductivity of 1.52 × 10−6 and 7.66 × 10−5 S cm−1 at 30°C and 80°C, respectively. The thermal analysis revealed that the degradation started at around 130–145°C and the weight loss ranged from 20 to 40%. The DSC of the samples showed no Tg, but only a large endothermic peak that was centered between 160 and 200 °C. The EPR analysis showed a broadening of the EPR resonance lines with increasing europium contents in the chitosan membranes due to the magnetic dipole–dipole coupling and spin–spin exchange between the Eu2+ ions. Moreover, the electrolytes based on chitosan and europium triflate presented good flexibility, homogeneity, and transparency.

Dissipative contact force models

"Series: Solid mechanics and its applications, vol. 226"

The appraisal of mesophilic anaerobic digestion and thermophilic aerobic digestion in the treatment of municipal sludge in Ireland

It has been well documented that the optimum feedstock for anaerobic digesters consists of readily biodegradable compounds, as found in primary sludge or even a mixed substrate of primary and excess activated sludge. Due to the requirements of the Urban Wastewater Treatment Plant Directive of 1991, the quantities of secondary sludge generated is set to increase substantially. A pilot scale study was undertaken to evaluate the performance of both Mesophilic Anaerobic Digestion and Thermophilic Aerobic digestion in the treatment of secondary sludge. The results indicated that the anaerobic pilot scale digester achieved a greater solids destruction than the aerobic pilot plant averaging at 28% T.S. removal verses 20% for the aerobic digester, despite the fact that secondary sludge is the optimum feedstock for aerobic digestion. This can, however, be attributed to the greater biomass yield experienced with aerobic systems, and to the absence of Autothermal conditions. At present, the traditional technique of Mesophilic Anaerobic Digestion is in widespread application throughout Ireland, for the stabilisation of sewage sludge. There is only one Autothermal Thermophilic Aerobic Digester at present situated in Killarney, Co. Kerry. A further objectives of the study was to compare full-scale applications of Mesophilic Anaerobic Digestion to ATAD. Two Sludge Treatment plants, situated in Co. Kerry, were used for this purpose, and were assessed mainly under the following headings; process stability, solids reduction on average, the ATAD plant in Killarney has the advantage of producing a “Class A” Biosolid in terms of pathogen reduction, and can effectively treat double the quantity of sludge. In addition, economically the ATAD plant is cheaper to run, costing €190 / t.d.s verses €211 / t.d.s. for the anaerobic digester in Tralee. An overview of additional operational Anaerobic Digestion Plants throughout Ireland is also presented.

The appraisal of anaerobic digestion in Ireland to develop improved designs and operational practice

Mesophilic Anaerobic Digestion treating sewage sludge was investigated at five full-scale sewage treatment plants in Ireland. The anaerobic digestion plants are compared and evaluated in terms of design, equipment, operation, monitoring and management. All digesters are cylindrical, gas mixed and heated Continuously Stirred Tank Reactors (CSTR), varying in size from 130m3 to 800m3. Heat exchanger systems heat all digesters. Three plants reported difficulties with the heating systems ranging from blockages to insufficient insulation and design. Exchangers were modified and replaced within one year of operation at two plants. All but one plant had Combined Heat and Power (CHP) systems installed. Parameter monitoring is a problem at all plants mainly due to a lack of staff and knowledge. The plant operators consider pH and temperature the most important parameters to be measured in terms of successful monitoring of an anaerobic digester. The short time taken and the ease at which pH and temperature can be measured may favour these parameters. Three laboratory scale pilot anaerobic digesters were operated using a variety of feeds over at 144-day period. Two of the pilots were unmixed and the third was mechanically mixed. As expected the unmixed reactors removed more COD by retention of solids in the digesters but also produced greater quantities of biogas than the mixed digester, especially when low solids feed such as whey was used. The mixed digester broke down more solids due to the superior contact between the substrate and the biomass. All three reactors showed good performance results for whey and sewage solids. Scum formation occurred giving operational problems for mixed and unmixed reactors when cattle slurry was used as the main feed source. The pilot test was also used to investigate which parameters were the best indicators of process instability. These trials clearly indicated that total Volatile Fatty Acid (VFA) concentrations was the best parameter to show signs of early process imbalance, while methane composition in the biogas was good to indicate possible nutrient deficiencies in the feed and oxygen shocks. pH was found to be a good process parameter only if the wastewater being treated produced low bicarbonate alkalinities during treatment.

Heterogene Prozesse am Beispiel der Verbrennung fester Stoffe und der Kristallisation aus Lösungen

Heterogeneous processes, solids, combustion, crystallization, kinetics, online-monitoring, gaspotentiometric oxygen sensors, chiral separation, solid/liquid equilibria

Influência de diferentes cavalos e da época de colheita no teor de vitamina C na laranja natal

This paper deals with the variation of the ascorbic acid content in Natal orange as related to the type of rootstock and to the picking time. The determinations were carried out in the juice of fruits which had practically the same ratio total solids/acidity being selected only the highest values of such quotient. The results can be summaryzed as follows: 1. The rootstock has a significant influence on the vitamin C content of the scion; this influence shows two interesting aspects: first, the ascorbic acid contet itself varies as a function of the rootstock; among the three rootstocks studied the highest values were obtained on scion growing on Serra d'água orange; the lowest values were found in "limão rugoso" and "limão francês" was intermediate; the second point to be emphasyzed is the manner of variation of the ascorbic acid content in the different rootstocks: in the case of Serra d'água. the content decreases slowly whereas in "limão francês" the level remains nearly constant and suddenly falls down; finally in the case of "limão rugoso" the amount of ascorbic acid increases significantly to return to the primitive level. 2. The amount of ascorbic acid, not considering the rootstock influence, varies strongly as a function of harvesting time; for this reason the present factor must be borne in mind when sampling for the determination of ascorbic acid in orange is concerned.

O brix na determinação da riqueza em açúcares do mamão como auxiliar no melhoramento do mamoeiro (Carica papaya L.)

There is in the literature a noteworthy lack of sampling methods to be employed in the selection of papaya fruits for genetical improvement purposes. In the present experiment methods applied to melon and watermelon were extended to papaya with good results. The authors tried to correlate the solids content-as determined by a hand refractometer-with total sugars in the fruit. The correlation does exist being significant and positive. A regression equation was worked out; it permits to calculate the total sugar content provided the Brix value determined by the hand refractometer is known. The equation is as follows: a = 0.57 s where a = total amount of sugar as glucose, and s = total solids.

A maturação do abacaxi

In the present work it was sougth to correlate the coloration of the fruit of Ananas comosus variety Perola with the pulp quality, aiming at the orientation of the fruit grower to the correct time of harvest. Pineapple fruit was chosen in 5 stages of maturation recognized by its external characteristics, principally its color. The fruits of each stage of maturation were analysed, determining the. weight, the percentage of soluble solids, and relation of acid to soluble solids. At the same time a test was made classifying the fruits as acid, regular, good, excellent, and spoiled. A correlation was found between the external coloration of the fruit and the degree of maturation. Concluding from this that the best time to harvest the variety Perola is in the third stage in the regions closest to the market and in the second stage in the regions which are farther away. For the cannery industry the fruit should be harvest in the first stage.

Effects of 2-chloroetylphosphonic acid on ripening of mango

Mature fruits of mango 'Paheri' were treated immediately after harvest with ethefon at 0 - 250 - 500 - 1.000 and 2.000 ppm. Fruit ripening was accelerated by all treatments , the time to maturity being reduced from 48 to 72 hours, when compared with controls. Maturation was evaluated, by external colour of fruits, soluble solids and acid contents.

Diversity and structure of microcrustacean assemblages (Cladocera and Copepoda) and limnological variability in perennial and intermittent pools in a semi-arid region, Bahia, Brazil

Temporary wetlands undergo recurrent drought due to the scarcity of water, which disrupts the hydrological connectivity with adjacent aquatic systems. However, some environments retain water for longer periods, allowing greater persistence of the community. The current study evaluated differences in the microcrustacean assemblages and limnological variability between perennial and intermittent pools in a semi-arid region of Brazil. The abiotic features (water temperature, pH, total alkalinity, electrical conductivity and depth) of intermittent pools were affected more than perennial pools due to loss of water volume. This may have contributed to a higher average richness and diversity index in some intermittent pools and differences in the structure of the assemblages. The lowest species richness and diversity were recorded where physical factors, such as a large quantity of suspended solids and variability in the electrical conductivity of the water and pH, make the environment unsuitable for these organisms. These results suggest that community development in intermittent pools is interrupted by the dry season; when the water returns, due to rainfall or rising groundwater, each pond undergoes a different process of colonization. In these circumstances, the biological importance of temporary aquatic environments is clear, since such pools provide shelters and have an important role in the maintenance of the regional diversity of aquatic environments.

Occurrence of Hirudinea species in a post urban reach of a Patagonian mountain stream

Temporal (May 2005 to February 2006) and habitat distribution (pools and riffles) of Hirudinea species was analyzed at a post urban reach from Esquel stream (Chubut province, Patagonia, Argentina). Site was located 5.7 km downstream a Waste Treatment Plant. Mean values of nutrients: ammonia, nitrates and soluble reactive phosphate, as well water conductivity, turbidity and total suspended solids indicated physical and organic pollution. Leeches assemblage was composed by the glossiphonids: Helobdella scutifera Blanchard, 1900, H. michaelseni (Blanchard, 1900), H. simplex (Moore, 1911), Helobdella sp., H. hyalina Ringuelet, 1942, H. obscura Ringuelet, 1942 and the semiscolecid Patagoniobdella variabilis (Blanchard, 1900). From these H. hyalina and H. obscura are new records for Chubut province. Helobdella hyalina (810 ind.m-2) and H. simplex (465 ind. m-2) clearly dominated the assemblage at the reach. Only H. simplex displayed a spatial preference being significantly more abundant in pools than in riffle habitats (p<0.001). Species recruitment occurred mostly at September, December and March when juveniles were very abundant. Although several species of Helobdella were able to live in the disturbed section of the stream, only H. simplex and H. hyalina sustained large populations at the site and can be considered as tolerant to organic enrichment. This information is valuable to future studies on stream condition assessment in mountainous areas in Patagonia, and in other areas in which these species are present.

An objective anisotropic elastic plastic model and Algorithm applicable to bone mechanics

The implicit projection algorithm of isotropic plasticity is extended to an objective anisotropic elastic perfectly plastic model. The recursion formula developed to project the trial stress on the yield surface, is applicable to any non linear elastic law and any plastic yield function.A curvilinear transverse isotropic model based on a quadratic elastic potential and on Hill's quadratic yield criterion is then developed and implemented in a computer program for bone mechanics perspectives. The paper concludes with a numerical study of a schematic bone-prosthesis system to illustrate the potential of the model.

Modelling the mechanical aspects of the curing process of magneto-sensitive elastomeric materials

In this paper, a phenomenologically motivated magneto-mechanically coupled finite strain elastic framework for simulating the curing process of polymers in the presence of a magnetic load is proposed. This approach is in line with previous works by Hossain and co-workers on finite strain curing modelling framework for the purely mechanical polymer curing (Hossain et al., 2009b). The proposed thermodynamically consistent approach is independent of any particular free energy function that may be used for the fully-cured magneto-sensitive polymer modelling, i.e. any phenomenological or micromechanical-inspired free energy can be inserted into the main modelling framework. For the fabrication of magneto-sensitive polymers, micron-size ferromagnetic particles are mixed with the liquid matrix material in the uncured stage. The particles align in a preferred direction with the application of a magnetic field during the curing process. The polymer curing process is a complex (visco) elastic process that transforms a fluid to a solid with time. Such transformation process is modelled by an appropriate constitutive relation which takes into account the temporal evolution of the material parameters appearing in a particular energy function. For demonstration in this work, a frequently used energy function is chosen, i.e. the classical Mooney-Rivlin free energy enhanced by coupling terms. Several representative numerical examples are demonstrated that prove the capability of our approach to correctly capture common features in polymers undergoing curing processes in the presence of a magneto-mechanical coupled load.

Simulació de processos de combustió de sòlids prims

L'objecte del projecte consisteix en investigar les capacitats del programari dedinàmica de fluids computacional FLUENT per simular processos transitoris de combustióquan es cremen sòlids. Com el programari FLUENT no incorpora cap mòdul de combustióde sòlids prims, s'hauran de realitzar les funcions d'usuari adients per tal d'incorporar lesequacions i les condicions de contorns que són rellevants en aquests tipus de problemes. Elmodel resultant es validarà amb dades experimentals per a la combustió de fulls decel•lulosa en flames bidimensionals. També es durà a terme una anàlisi de sensibilitat de lasolució variant els paràmetres del model. En funció dels resultats de la validació es durà aterme una extensió del model per a situacions tridimensionals

Prise en charge nutritionnelle préopératoire. [Preoperative nutritional support.]

Undernutrition is an independent factor of postoperative morbidity and mortality The aim of a preoperative nutritional support is to enhance immune muscular and cognitive functions, and to support wound healing This nutritional support (e g dietary management enteral or parenteral nutrition) should be limited to high risk situations with a beneficial effect of nutrition for the patient undernutrition major surgery and elderly Preoperative nutritional support should be scheduled for atleast 7 to 10 days before the surgery During the preoperative period the type and route of an eventual postoperative nutritional assistance should be anticipated In the case of emergency surgery nutritional assessment of the patient should be done as soon as possible before surgery or in the 48 h postoperative period Finally, in elective surgery, preoperative fasting should be limited to 2-3 hours for clear liquids and 6 hours for solids (C) 2010 Published by Elsevier Masson SAS