Real-Time Visual Ground-Truth System for Indoor Robotic Applications

The robotics community is concerned with the ability to infer and compare the results from researchers in areas such as vision perception and multi-robot cooperative behavior. To accomplish that task, this paper proposes a real-time indoor visual ground truth system capable of providing accuracy with at least more magnitude than the precision of the algorithm to be evaluated. A multi-camera architecture is proposed under the ROS (Robot Operating System) framework to estimate the 3D position of objects and the implementation and results were contextualized to the Robocup Middle Size League scenario.

Neural control of an autonomous robot

This article aims to apply the concepts associated with artificial neural networks (ANN) in the control of an autonomous robot system that is intended to be used in competitions of robots. The robot was tested in several arbitrary paths in order to verify its effectiveness. The results show that the robot performed the tasks with success. Moreover, in the case of arbitrary paths the ANN control outperforms other methodologies, such as fuzzy logic control (FLC).

Simulation Environment for Multi-Robot Cooperative 3D Target Perception

4th International Conference, SIMPAR 2014, Bergamo, Italy, October 20-23, 2014

Uncertainty based Multi-Robot Cooperative Triangulation

The paper presents a multi-robot cooperative framework to estimate the 3D position of dynamic targets, based on bearing-only vision measurements. The uncertainty of the observation provided by each robot equipped with a bearing-only vision system is effectively addressed for cooperative triangulation purposes by weighing the contribution of each monocular bearing ray in a probabilistic manner. The envisioned framework is evaluated in an outdoor scenario with a team of heterogeneous robots composed of an Unmanned Ground and Aerial Vehicle.

Bioelectrochemically-assisted reductive dechlorination of 1,2-dichloroethane by a Dehalococcoides-enriched microbial culture

The aim of this study was to verify the possibility to use a polarized graphite electrode as an electron donor for the reductive dechlorination of 1,2-dichloroethane, an ubiquitous groundwater contaminant. The rate of 1,2-DCA dechlorination almost linearly increased by decreasing the set cathode potential over a broad range of set cathode potentials (i.e., from −300 mV to −900 mV vs. the standard hydrogen electrode). This process was primarily dependent on electrolytic H2 generation. On the other hand, reductive dechlorination proceeded (although quite slowly) with a very high Coulombic efficiency (near 70%) at a set cathode potential of −300 mV, where no H2 production occurred. Under this condition, reductive dechlorination was likely driven by direct electron uptake from the surface of the polarized electrode. Taken as a whole, this study further extends the range of chlorinated contaminants which can be treated with bioelectrochemical systems.

Biosynthesis-Assisted Structural Elucidation of the Bartolosides, Chlorinated Aromatic Glycolipids from Cyanobacteria

The isolation of the bartolosides, unprecedented cyanobacterial glycolipids featuring aliphatic chains with chlorine substituents and C-glycosyl moieties, is reported. Their chlorinated dialkylresorcinol (DAR) core presented a major structural-elucidation challenge. To overcome this, we discovered the bartoloside (brt) biosynthetic gene cluster and linked it to the natural products through in vitro characterization of the DAR-forming ketosynthase and aromatase. Bioinformatic analysis also revealed a novel potential halogenase. Knowledge of the bartoloside biosynthesis constrained the DAR core structure by defining key pathway intermediates, ultimately allowing us to determine the full structures of the bartolosides. This work illustrates the power of genomics to enable the use of biosynthetic information for structure elucidation.

Laparoscopic Assisted Vaginal Hysterectomy Versus Vaginal Hysterectomy

Introduction: Hysterectomy is the commonest gynecologic operation, performed for malignant and benign conditions. There are many approaches to hysterectomy for benign disease. Studies comparing the techniques have showed that vaginal hysterectomy has benefits in terms of reduced hospital stay, faster recovery and less operating time. Objective: The purpose of this study is to compare the surgical and immediate postoperative outcomes of Laparoscopic Assisted Vaginal Hysterectomy (LAVH) with those of Vaginal Hysterectomy (VH). Methods: Retrospective descriptive study, comparing two groups of women who underwent LAVH or VH in our department during a 24 months period, from January 2009 to December 2010. The two groups were compared regarding age, vaginal deliveries, previous abdominal surgery, uterine and adnexal pathology, intra-operative and post-operative complications, uterus weight, blood loss and number of days until discharge. Results: In our study 42 LAVH and 99 VH were included, with a patient mean age of 47 and 59, respectively. The most frequent indication for hysterectomy was fibroids (80%) for LAVH and POP(58.6%) for HV. In LAVH group 47.6% of patients had previous abdominal surgery, vs 28.2% in VH group. The medium operative time was 167 minutes for LAVH vs 99 minutes for HV. The intra-operative complications were one case (2%) of accidental incision of rectum in LAVH, and one bladder incision in the VH (1%). There were 3 conversions to laparotomy for difficult technique (7%) in LAVH group. There were no significant post-operative complications for LAVH. In VH group there were 2 cases of haemoperitoneum (2%) and 1 case requiring blood transfusion (1%). The mean time for discharge was 4.23 days for LAVH and 4.46 days for VH. Conclusions: In our study, the main advantage for VH was the reduced operative time. In terms of time to discharge there was no difference between the 2 groups. The main intra-operative complication of LAVH was the risk of conversion to laparotomy, but post-operatively this procedure had fewer complications than VH. In conclusion, LAVH is a safe option for women requiring hysterectomy in cases where VH is anticipated to be technically difficult.

A filter algorithm: comparison with NLP solvers

The purpose of this work is to present an algorithm to solve nonlinear constrained optimization problems, using the filter method with the inexact restoration (IR) approach. In the IR approach two independent phases are performed in each iteration—the feasibility and the optimality phases. The first one directs the iterative process into the feasible region, i.e. finds one point with less constraints violation. The optimality phase starts from this point and its goal is to optimize the objective function into the satisfied constraints space. To evaluate the solution approximations in each iteration a scheme based on the filter method is used in both phases of the algorithm. This method replaces the merit functions that are based on penalty schemes, avoiding the related difficulties such as the penalty parameter estimation and the non-differentiability of some of them. The filter method is implemented in the context of the line search globalization technique. A set of more than two hundred AMPL test problems is solved. The algorithm developed is compared with LOQO and NPSOL software packages.

Development of advanced human robot interaction systems

O trabalho aqui apresentado é a Dissertação da minha Tese do curso de Mestrado em Engenharia Eletrotécnica e de Computadores do ISEP, realizada em parceria com o INESC TEC. O trabalho consiste no desenvolvimento de um sistema avançado de interação entre homem-robô, usando ferramentas de software livres e de domínio público e hardware pouco dispendioso e facilmente acessível. Pretende-se que o sistema desenvolvido possa ser adotado por pequenas ou micro empresas, daí a restrição monetária. Este tipo de empresas tem, por norma, uma capacidade de investimento pequena, e ficam impossibilitadas de aceder a este tipo de sistemas automatizados se estes forem caros. No entanto, o robô continua a ser um componente fundamental, sendo dispendioso. Os trabalhos realizados pelos sistemas robóticos podem por um lado, ser repetitivos sem necessidade de grandes ajustes; por outro lado, o trabalho a realizar pode ser bastante diverso, sendo necessários bastantes ajustes com (possivelmente) programação do robô. As empresas podem não ter disponível mão-de-obra qualificada para realização da programação do robô. Pretende-se então um sistema de “ensino” que seja simples e rápido. Este trabalho pretende satisfazer as necessidades de um sistema de interação homem-robô intuitivo mesmo para operadores que não estejam familiarizados com a robótica. Para simplificar a transferência de informação da tarefa a desempenhar pelo sistema robótico é usado um sistema de infravermelhos para delinear a operação a desempenhar, neste caso concreto uma operação de soldadura. O operador usa um apontador com marcadores, a posição destes marcadores é detetada usando duas câmaras para permitir o posicionamento tridimensional no espaço. As câmaras possuem filtros infravermelhos para separar o espectro de luz. Para o controlo do sistema e interface com o robô é usado um computador de baixos recursos computacionais e energéticos, e também de baixo custo. O sistema desenvolvido é portanto computacionalmente leve para poder ser executado neste computador.

Automatic Small Bowel Tumor Diagnosis by Using Multi-Scale Wavelet-Based Analysis in Wireless Capsule Endoscopy Images

BACKGROUND: Wireless capsule endoscopy has been introduced as an innovative, non-invasive diagnostic technique for evaluation of the gastrointestinal tract, reaching places where conventional endoscopy is unable to. However, the output of this technique is an 8 hours video, whose analysis by the expert physician is very time consuming. Thus, a computer assisted diagnosis tool to help the physicians to evaluate CE exams faster and more accurately is an important technical challenge and an excellent economical opportunity. METHOD: The set of features proposed in this paper to code textural information is based on statistical modeling of second order textural measures extracted from co-occurrence matrices. To cope with both joint and marginal non-Gaussianity of second order textural measures, higher order moments are used. These statistical moments are taken from the two-dimensional color-scale feature space, where two different scales are considered. Second and higher order moments of textural measures are computed from the co-occurrence matrices computed from images synthesized by the inverse wavelet transform of the wavelet transform containing only the selected scales for the three color channels. The dimensionality of the data is reduced by using Principal Component Analysis. RESULTS: The proposed textural features are then used as the input of a classifier based on artificial neural networks. Classification performances of 93.1% specificity and 93.9% sensitivity are achieved on real data. These promising results open the path towards a deeper study regarding the applicability of this algorithm in computer aided diagnosis systems to assist physicians in their clinical practice.

Automated segmentation, tracking and evaluation of bacteria in microscopy images

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Algorithm for the Parkinson’s disease behavioural models characterization using a biosensor

Dissertação para obtenção do Grau de Mestre em Engenharia Biomédica

Robot Manipulator Systems: Analysis and Control

Manipulator systems are rather complex and highly nonlinear which makes difficult their analysis and control. Classic system theory is veil known, however it is inadequate in the presence of strong nonlinear dynamics. Nonlinear controllers produce good results [1] and work has been done e. g. relating the manipulator nonlinear dynamics with frequency response [2–5]. Nevertheless, given the complexity of the problem, systematic methods which permit to draw conclusions about stability, imperfect modelling effects, compensation requirements, etc. are still lacking. In section 2 we start by analysing the variation of the poles and zeros of the descriptive transfer functions of a robot manipulator in order to motivate the development of more robust (and computationally efficient) control algorithms. Based on this analysis a new multirate controller which is an improvement of the well known “computed torque controller” [6] is announced in section 3. Some research in this area was done by Neuman [7,8] showing tbat better robustness is possible if the basic controller structure is modified. The present study stems from those ideas, and attempts to give a systematic treatment, which results in easy to use standard engineering tools. Finally, in section 4 conclusions are presented.

Kitchen robot prod. line development. Proj. of Bowden cables cutting and thermal forming machine.

This document presents particular description of work done during student’s internship in PR Metal company realized as ERASMUS PROJECT at ISEP. All information including company’s description and its structure, overview of the problems and analyzed cases, all stages of projects from concept to conclusion can be found here. Description of work done during the internship is divided here into two pieces. First part concerns one activities of the company which is robotic chefs (kitchen robot) production line. Work, that was done for development of this line involved several tasks, among them: creating a single-worker montage station for screwing robots housing’s parts, improve security system for laser welding chamber, what particularly consists in designing automatically closing door system with special surface, that protects against destructive action of laser beam, test station for examination of durability of heating connectors, solving problem with rotors vibrations. Second part tells about main task, realized in second half of internship and stands a complete description of machine development and design. The machine is a part of car handle latch cable production line and its tasks are: cutting cable to required length and hot-forming plastic cover for further assembly needs.

Web-assisted tobacco intervention in Portuguese : intentions to make behavioural changes and behavioural changes

ABSTRACT - The problem of how to support “intentions to make behavioural changes” (IBC) and “behaviour changes” (BC) in smoking cessation when there is a scarcity of resources is a pressing issue in public health terms. The present research focuses on the use of information and communications technologies and their role in smoking cessation. It is developed in Portugal after the ratification of WHO Framework Convention on Tobacco Control (on 8 November 2005). The prevalence of smokers over fifteen years of age within the population stood at 20.9% (30.9% for men and 11.8% for women). While the strategy of helping people to quit smoking has been emphasised at National Health Service (NHS) level, the uptake of cessation assistance has exceeded the capacity of the service. This induced the search of new theoretical and practical venues to offer alternative options to people willing to stop smoking. Among these, the National Health Plan (NHP) of Portugal (2004-2010), identifies the use of information technologies in smoking cessation. eHealth and the importance of health literacy as a means of empowering people to make behavioural changes is recurrently considered an option worth investigating. The overall objective of this research is to understand, in the Portuguese context, the use of the Internet to help people to stop smoking. Research questions consider factors that may contribute to “intentions to make behavioural changes” (IBC) and “behavioural changes” (BC) while using a Web-Assisted Tobacco Intervention Probe (WATIP). Also consideration is given to the trade-off on the use of the Web as a tool for smoking cessation: can it reach a vast number of people for a small cost (efficiency) demonstrating to work in the domain of smoking cessation (efficacy)”? In addition to the introduction, there is a second chapter in which the use of tobacco is discussed as a public health menace. The health gains achieved by stopping smoking and the means of quitting are also examined, as is the use of the Internet in smoking cessation. Then, several research issues are introduced. These include background theory and the theoretical framework for the Sense of Coherence. The research model is also discussed. A presentation of the methods, materials and of the Web-Assisted Tobacco Intervention Probe (WATIP) follows. In chapter four the results of the use of the Web-Assisted Tobacco Intervention Probe (WATIP) are presented. This study is divided into two sections. The first describes results related to quality control in relation to the Web-Assisted Tobacco Intervention Probe (WATIP) and gives an overview of its users. Of these, 3,150 answered initial eligibility questions. In the end, 1,463 met all eligibility requirements, completed intake, decided on a day to quit smoking (Dday) and declared their “intentions to make behavioural changes” (IBC) while a second targeted group of 650 did not decide on a Dday. With two quit attempts made before joining the platform, most of the participants had experienced past failures while wanting to stop. The smoking rate averaged 21 cigarettes per day. With a mean age of 35, of the participants 55% were males. Among several other considerations, gender and the Sense of Coherence (SOC) influenced the success of participants in their IBC and endeavour to set quit dates. The results of comparing males and females showed that, for current smokers, establishing a Dday was related to gender differences, not favouring males (OR=0.76, p<0.005). Belonging to higher Socio-economic strata (SES) was associated with the intention to consider IBC (when compared to lower SES condition) (OR=1.57, p<0.001) and higher number of school years (OR=0.70, p<0.005) favoured the decision to smoking cessation. Those who demonstrated higher confidence in their likelihood of success in stopping in the shortest time had a higher rate of setting a Dday (OR=0.51, p<0.001). There were differences between groups in IBC reflecting the high and low levels of the SOC score (OR=1.43, p=0.006), as those who considered setting a Dday had higher levels of SOC. After adjusting for all variables, stages of readiness to change and SOC were kept in the model. This is the first Arm of this research where the focus is a discussion of the system’s implications for the participants’ “intentions to make behavioural changes” (IBC). Moreover, a second section of this study (second Arm) offers input collected from 77 in-depth interviews with the Web-Assisted Tobacco Intervention Probe (WATIP) users. Here, “Behaviour Change” (BC) and the usability of the platform are explored a year after IBC was declared. A percentage of 32.9% of self-reported, 12-month quitters in continuous abstinence from smoking from Dday to the 12-month follow- up point of the use of the Web-Assisted Tobacco Intervention Probe (WATIP) has been assessed. Comparing the Sense of Coherence (SOC) scores of participants by their respective means, according to the two groups, there was a significant difference in these scores of non smokers (BC) (M=144,66, SD=22,52) and Sense of Coherence (SOC) of smokers (noBC) (M=131,51, SD=21,43) p=0.014. This WATIP strategy and its contents benefit from the strengthening of the smoker’s sense of coherence (SOC), so that the person’s progress towards a life without tobacco may be experienced as comprehensible, manageable and meaningful. In this sample the sense of coherence (SOC) effect is moderate although it is associated with the day to quit smoking (Dday). Some of the limitations of this research have to do with self-selection bias, sample size (power) and self-reporting (no biochemical validation). The enrolment of participants was therefore not representative of the smoking population. It is not possible to verify the Web-Assisted Tobacco Intervention Probe (WATIP) evaluation of external validity; consequently, the results obtained cannot be applied generalized. No participation bias is provided. Another limitation of this study is the associated limitations of interviews. Interviewees’ perception that fabricating answers could benefit them more than telling the simple truth in response to questions is a risk that is not evaluated (with no external validation like measuring participants’ carbon monoxide levels). What emerges in this analysis is the relevance of the process that leads to the establishment of the quit day (Dday) to stop using tobacco. In addition, technological issues, when tailoring is the focus, are key elements for scrutiny. The high number of dropouts of users of the web platform mandates future research that should concentrate on the matters of the user-centred design of portals. The focus on gains in health through patient-centred care needs more research, so that technology usability be considered within the context of best practices in smoking cessation.