Développement d'une méthode microgravimétrique urbaine : intégration dans un SIG et application au projet du M2 lausannois

Résumé La réalisation d'une seconde ligne de métro (M2) dès 2004, passant dans le centre ville de Lausanne, a été l'opportunité de développer une méthodologie concernant des campagnes microgravimétriques dans un environnement urbain perturbé. Les corrections topographiques prennent une dimension particulière dans un tel milieu, car de nombreux objets non géologiques d'origine anthropogénique comme toutes sortes de sous-sols vides viennent perturber les mesures gravimétriques. Les études de génie civil d'avant projet de ce métro nous ont fournis une quantité importante d'informations cadastrales, notamment sur les contours des bâtiments, sur la position prévue du tube du M2, sur des profondeurs de sous-sol au voisinage du tube, mais aussi sur la géologie rencontré le long du corridor du M2 (issue des données lithologiques de forages géotechniques). La planimétrie des sous-sols a été traitée à l'aide des contours des bâtiments dans un SIG (Système d'Information Géographique), alors qu'une enquête de voisinage fut nécessaire pour mesurer la hauteur des sous-sols. Il a été alors possible, à partir d'un MNT (Modèle Numérique de Terrain) existant sur une grille au mètre, de mettre à jour celui ci avec les vides que représentent ces sous-sols. Les cycles de mesures gravimétriques ont été traités dans des bases de données Ac¬cess, pour permettre un plus grand contrôle des données, une plus grande rapidité de traitement, et une correction de relief rétroactive plus facile, notamment lorsque des mises à jour de la topographie ont lieu durant les travaux. Le quartier Caroline (entre le pont Bessières et la place de l'Ours) a été choisi comme zone d'étude. Le choix s'est porté sur ce quartier du fait que, durant ce travail de thèse, nous avions chronologiquement les phases pré et post creusement du tunnel du M2. Cela nous a permis d'effectuer deux campagnes gravimétriques (avant le creu¬sement durant l'été 2005 et après le creusement durant l'été 2007). Ces réitérations nous ont permis de tester notre modélisation du tunnel. En effet, en comparant les mesures des deux campagnes et la réponse gravifique du modèle du tube discrétisé en prismes rectangulaires, nous avons pu valider notre méthode de modélisation. La modélisation que nous avons développée nous permet de construire avec détail la forme de l'objet considéré avec la possibilité de recouper plusieurs fois des interfaces de terrains géologiques et la surface topographique. Ce type de modélisation peut s'appliquer à toutes constructions anthropogéniques de formes linéaires. Abstract The realization of a second underground (M2) in 2004, in downtown Lausanne, was the opportunity to develop a methodology of microgravity in urban environment. Terrain corrections take on special meaning in such environment. Many non-geologic anthropogenic objects like basements act as perturbation of gravity measurements. Civil engineering provided a large amount of cadastral informations, including out¬lines of buildings, M2 tube position, depths of some basements in the vicinity of the M2 corridor, and also on the geology encountered along the M2 corridor (from the lithological data from boreholes). Geometry of basements was deduced from building outlines in a GIS (Geographic Information System). Field investigation was carried out to measure or estimate heights of basements. A DEM (Digital Elevation Model) of the city of Lausanne is updated from voids of basements. Gravity cycles have been processed in Access database, to enable greater control of data, enhance speed processing, and retroactive terrain correction easier, when update of topographic surface are available. Caroline area (between the bridge Saint-Martin and Place de l'Ours) was chosen as the study area. This area was in particular interest because it was before and after digging in this thesis. This allowed us to conduct two gravity surveys (before excavation during summer 2005 and after excavation during summer 2007). These re-occupations enable us to test our modélisation of the tube. Actually, by comparing the difference of measurements between the both surveys and the gravity response of our model (by rectangular prisms), we were able to validate our modeling. The modeling method we developed allows us to construct detailed shape of an object with possibility to cross land geological interfaces and surface topography. This type of modélisation can be applied to all anthropogenic structures.

The evolution of unicoloniality in ant societies : recognition, dispersal and population genetic structure

Introduction Societies of ants, bees, wasps and termites dominate many terrestrial ecosystems (Wilson 1971). Their evolutionary and ecological success is based upon the regulation of internal conflicts (e.g. Ratnieks et al. 2006), control of diseases (e.g. Schmid-Hempel 1998) and individual skills and collective intelligence in resource acquisition, nest building and defence (e.g. Camazine 2001). Individuals in social species can pass on their genes not only directly trough their own offspring, but also indirectly by favouring the reproduction of relatives. The inclusive fitness theory of Hamilton (1963; 1964) provides a powerful explanation for the evolution of reproductive altruism and cooperation in groups with related individuals. The same theory also led to the realization that insect societies are subject to internal conflicts over reproduction. Relatedness of less-than-one is not sufficient to eliminate all incentive for individual selfishness. This would indeed require a relatedness of one, as found among cells of an organism (Hardin 1968; Keller 1999). The challenge for evolutionary biology is to understand how groups can prevent or reduce the selfish exploitation of resources by group members, and how societies with low relatedness are maintained. In social insects the evolutionary shift from single- to multiple queens colonies modified the relatedness structure, the dispersal, and the mode of colony founding (e.g. (Crozier & Pamilo 1996). In ants, the most common, and presumably ancestral mode of reproduction is the emission of winged males and females, which found a new colony independently after mating and dispersal flights (Hölldobler & Wilson 1990). The alternative reproductive tactic for ant queens in multiple-queen colonies (polygyne) is to seek to be re-accepted in their natal colonies, where they may remain as additional reproductives or subsequently disperse on foot with part of the colony (budding) (Bourke & Franks 1995; Crozier & Pamilo 1996; Hölldobler & Wilson 1990). Such ant colonies can contain up to several hundred reproductive queens with an even more numerous workforce (Cherix 1980; Cherix 1983). As a consequence in polygynous ants the relatedness among nestmates is very low, and workers raise brood of queens to which they are only distantly related (Crozier & Pamilo 1996; Queller & Strassmann 1998). Therefore workers could increase their inclusive fitness by preferentially caring for their closest relatives and discriminate against less related or foreign individuals (Keller 1997; Queller & Strassmann 2002; Tarpy et al. 2004). However, the bulk of the evidence suggests that social insects do not behave nepotistically, probably because of the costs entailed by decreased colony efficiency or discrimination errors (Keller 1997). Recently, the consensus that nepotistic behaviour does not occur in insect colonies was challenged by a study in the ant Formica fusca (Hannonen & Sundström 2003b) showing that the reproductive share of queens more closely related to workers increases during brood development. However, this pattern can be explained either by nepotism with workers preferentially rearing the brood of more closely related queens or intrinsic differences in the viability of eggs laid by queens. In the first chapter, we designed an experiment to disentangle nepotism and differences in brood viability. We tested if workers prefer to rear their kin when given the choice between highly related and unrelated brood in the ant F. exsecta. We also looked for differences in egg viability among queens and simulated if such differences in egg viability may mistakenly lead to the conclusion that workers behave nepotistically. The acceptance of queens in polygnous ants raises the question whether the varying degree of relatedness affects their share in reproduction. In such colonies workers should favour nestmate queens over foreign queens. Numerous studies have investigated reproductive skew and partitioning of reproduction among queens (Bourke et al. 1997; Fournier et al. 2004; Fournier & Keller 2001; Hammond et al. 2006; Hannonen & Sundström 2003a; Heinze et al. 2001; Kümmerli & Keller 2007; Langer et al. 2004; Pamilo & Seppä 1994; Ross 1988; Ross 1993; Rüppell et al. 2002), yet almost no information is available on whether differences among queens in their relatedness to other colony members affects their share in reproduction. Such data are necessary to compare the relative reproductive success of dispersing and non-dispersing individuals. Moreover, information on whether there is a difference in reproductive success between resident and dispersing queens is also important for our understanding of the genetic structure of ant colonies and the dynamics of within group conflicts. In chapter two, we created single-queen colonies and then introduced a foreign queens originating from another colony kept under similar conditions in order to estimate the rate of queen acceptance into foreign established colonies, and to quantify the reproductive share of resident and introduced queens. An increasing number of studies have investigated the discrimination ability between ant workers (e.g. Holzer et al. 2006; Pedersen et al. 2006), but few have addressed the recognition and discrimination behaviour of workers towards reproductive individuals entering colonies (Bennett 1988; Brown et al. 2003; Evans 1996; Fortelius et al. 1993; Kikuchi et al. 2007; Rosengren & Pamilo 1986; Stuart et al. 1993; Sundström 1997; Vásquez & Silverman in press). These studies are important, because accepting new queens will generally have a large impact on colony kin structure and inclusive fitness of workers (Heinze & Keller 2000). In chapter three, we examined whether resident workers reject young foreign queens that enter into their nest. We introduced mated queens into their natal nest, a foreign-female producing nest, or a foreign male-producing nest and measured their survival. In addition, we also introduced young virgin and mated queens into their natal nest to examine whether the mating status of the queens influences their survival and acceptance by workers. On top of polgyny, some ant species have evolved an extraordinary social organization called 'unicoloniality' (Hölldobler & Wilson 1977; Pedersen et al. 2006). In unicolonial ants, intercolony borders are absent and workers and queens mix among the physically separated nests, such that nests form one large supercolony. Super-colonies can become very large, so that direct cooperative interactions are impossible between individuals of distant nests. Unicoloniality is an evolutionary paradox and a potential problem for kin selection theory because the mixing of queens and workers between nests leads to extremely low relatedness among nestmates (Bourke & Franks 1995; Crozier & Pamilo 1996; Keller 1995). A better understanding of the evolution and maintenance of unicoloniality requests detailed information on the discrimination behavior, dispersal, population structure, and the scale of competition. Cryptic genetic population structure may provide important information on the relevant scale to be considered when measuring relatedness and the role of kin selection. Theoretical studies have shown that relatedness should be measured at the level of the `economic neighborhood', which is the scale at which intraspecific competition generally takes place (Griffin & West 2002; Kelly 1994; Queller 1994; Taylor 1992). In chapter four, we conducted alarge-scale study to determine whether the unicolonial ant Formica paralugubris forms populations that are organised in discrete supercolonies or whether there is a continuous gradation in the level of aggression that may correlate with genetic isolation by distance and/or spatial distance between nests. In chapter five, we investigated the fine-scale population structure in three populations of F. paralugubris. We have developed mitochondria) markers, which together with the nuclear markers allowed us to detect cryptic genetic clusters of nests, to obtain more precise information on the genetic differentiation within populations, and to separate male and female gene flow. These new data provide important information on the scale to be considered when measuring relatedness in native unicolonial populations.

Relació de la flexibilitat i la força en la prevenció de lesions

El futbol és un esport amb una elevada incidència de lesions. L’estudi pretén comprovar si l’augment de la flexibilitat i la força de les extremitats inferiors redueix aquesta incidència. S’ha dut a terme una recerca sobre les parts del sistema musculesqueletic més afectades per les lesions i els mecanismes corresponents en l’esport del futbol. L’equip juvenil “D” de l’A.E.C.Manlleu ha estat la població de l’estudi. S’ha dividit l’equip en un grup control i un grup d’intervenció, en el qual s’ha dut a terme un entrenament específic durant 3 mesos per tal d’augmentar la flexibilitat i la força de les extremitats inferiors i del tronc. A través de la realització del test Sit & Reach i de l’1RM en sentadeta s’ha comprovat si aquest augment ha estat efectiu i la relació amb el nombre de lesions.

Computational problems in perfect phylogeny haplotyping: Typing without calling the allele

A haplotype is an m-long binary vector. The XOR-genotype of two haplotypes is the m-vector of their coordinate-wise XOR. We study the following problem: Given a set of XOR-genotypes, reconstruct their haplotypes so that the set of resulting haplotypes can be mapped onto a perfect phylogeny (PP) tree. The question is motivated by studying population evolution in human genetics and is a variant of the PP haplotyping problem that has received intensive attention recently. Unlike the latter problem, in which the input is '' full '' genotypes, here, we assume less informative input and so may be more economical to obtain experimentally. Building on ideas of Gusfield, we show how to solve the problem in polynomial time by a reduction to the graph realization problem. The actual haplotypes are not uniquely determined by the tree they map onto and the tree itself may or may not be unique. We show that tree uniqueness implies uniquely determined haplotypes, up to inherent degrees of freedom, and give a sufficient condition for the uniqueness. To actually determine the haplotypes given the tree, additional information is necessary. We show that two or three full genotypes suffice to reconstruct all the haplotypes and present a linear algorithm for identifying those genotypes.

Scour Around Bridge Piers and Abutments, HR-30 and Iowa Highway Research Board Bulletin No. 4, 1956

Man’s never-ending search for better materials and construction methods and for techniques of analysis and design has overcome most of the early difficulties of bridge building. Scour of the stream bed, however, has remained a major cause of bridge failures ever since man learned to place piers and abutments in the stream in order to cross wide rivers. Considering the overall complexity of field conditions, it is not surprising that no generally accepted principles (not even rules of thumb) for the prediction of scour around bridge piers and abutments have evolved from field experience alone. The flow of individual streams exhibits a manifold variation, and great disparity exists among different rivers. The alignment, cross section, discharge, and slope of a stream must all be correlated with the scour phenomenon, and this in turn must be correlated with the characteristics of the bed material ranging from clays and fine silts to gravels and boulders. Finally, the effect of the shape of the obstruction itself-the pier or abutment-must be assessed. Since several of these factors are likely to vary with time to some degree, and since the scour phenomenon as well is inherently unsteady, sorting out the influence of each of the various factors is virtually impossible from field evidence alone. The experimental approach was chosen as the investigative method for this study, but with due recognition of the importance of field measurements and with the realization that the results must be interpreted so as to be compatible with the present-day theories of fluid mechanics and sediment transportation. This approach was chosen because, on the one hand, the factors affecting the scour phenomenon can be controlled in the laboratory to an extent that is not possible in the field, and, on the other hand, the model technique can be used to circumvent the present inadequate understanding of the phenomenon of the movement of sediment by flowing water. In order to obtain optimum results from the laboratory study, the program was arranged at the outset to include a related set of variables in each of several phases into which the whole problem was divided. The phases thus selected were : 1. Geometry of piers and abutments, 2. Hydraulics of the stream, 3. Characteristics of the sediment, 4. Geometry of channel shape and alignment.

Promotion of learning skills in the study of economics. pilot project in the subject area of

This communication is part of a larger teaching innovation project financed by the University ofBarcelona, whose objective is to develop and evaluate transversal competences of the UB, learningability and responsibility. The competence is divided into several sub-competencies being the ability toanalyze and synthesis the most intensely worked in the first year. The work presented here part fromthe results obtained in phase 1 and 2 previously implemented in other subjects (Mathematics andHistory) in the first year of the degree of Business Administration Degree. In these subjects’ previousexperiences there were deficiencies in the acquisition of learning skills by the students. The work inthe subject of Mathematics facilitated that students become aware of the deficit. The work on thesubject of History insisted on developing readings schemes and with the practical exercises wassought to go deeply in the development of this competence.The third phase presented here is developed in the framework of the second year degree, in the WorldEconomy subject. The objective of this phase is the development and evaluation of the same crosscompetence of the previous phases, from a practice that includes both, quantitative analysis andcritical reflection. Specifically the practice focuses on the study of the dynamic relationship betweeneconomic growth and the dynamics in the distribution of wealth. The activity design as well as theselection of materials to make it, has been directed to address gaps in the ability to analyze andsynthesize detected in the subjects of the first year in the previous phases of the project.The realization of the practical case is considered adequate methodology to improve the acquisition ofcompetence of the students, then it is also proposed how to evaluate the acquisition of suchcompetence. The practice is evaluated based on a rubric developed in the framework of the projectobjectives. Thus at the end of phase 3 we can analyze the process that have followed the students,detect where they have had major difficulties and identify those aspects of teaching that can help toimprove the acquisition of skills by the students. The interest of this phase resides in the possibility tovalue whether tracing of learning through competences, organized in a collaborative way, is a goodtool to develop the acquisition of these skills and facilitate their evaluation.

Itinéraire clinique en traumatologie, une mode ou un besoin [Clinical pathway in traumatology, a fashion or need?].

A clinical route is defined as a "set of methods and instruments to members of a multidisciplinary and Interprofessional team to agree on the tasks for a specific patient population. This is a program of care to ensure the provision of quality care and efficient realization". The University Hospital is not immune to this phenomenon. In the Department of the musculoskeletal system, a first project of this kind concerns the fracture of the proximal femur in the elderly.

Successful bilateral lung transplantation after previous pneumonectomy

Objective: To present the feasibility of bilateral lung transplantation after previously performed pneumonectomy.Methods: A 32 years old women underwent right pneumonectomy for bronchiectasis-related destroyed lung. Eight months later, she developed a vascular post-pneumonectomy syndrome and underwent realigning of the mediastinum by an intrathoracic expander that was complicated by an adult respiratory distress syndrome of the left lung requiring mechanical ventilation, arterio-venous CO2 removal (Novalung) and finally bilateral lung transplantation. Via clamshell incision, the post-pneumonectomy cavity was dissected and the superior vena cava (SVC) and carina were exposed. The pulmonary vessel stumps were dissected intrapericardically after realization of a right-sided hemi-pericardectomy. Extracorporeal circulation was started after central cannulation of the aorta and the inferior vena cava. A right upper lobe sleeve resection of the donor lung was performed. The intermediate bronchus was then implanted in the dissected recipient carina after realization of a hilar release maneuver. The right pulmonary artery was clamped between SVC andthe ascending aorta followed by end -to-end anastomosis of the donor and recipient artery and left atrial cuffs, respectively. Satisfactory graft function allowed decanulation and standard transplantation of the left lung without extracorporeal circulation.Results: Bronchoscopy and trans-esophageal echocardiography demonstrated a patent airway and vascular anastomoses without stenosis. Follow-up revealed excellent gas exchanges, no airway complications and well-functioning grafts on both sides with right-sided ventilation and perfusion two months after transplantation of 37% and 22%, respectively.Conclusion: This is to our knowledge the first report of successful bilateral lung transplantation after previous pneumonectomy unrelated to transplantation.

Robust Nonlinear Mapping of Soil Contamination Using Support Regression

Spatial data analysis mapping and visualization is of great importance in various fields: environment, pollution, natural hazards and risks, epidemiology, spatial econometrics, etc. A basic task of spatial mapping is to make predictions based on some empirical data (measurements). A number of state-of-the-art methods can be used for the task: deterministic interpolations, methods of geostatistics: the family of kriging estimators (Deutsch and Journel, 1997), machine learning algorithms such as artificial neural networks (ANN) of different architectures, hybrid ANN-geostatistics models (Kanevski and Maignan, 2004; Kanevski et al., 1996), etc. All the methods mentioned above can be used for solving the problem of spatial data mapping. Environmental empirical data are always contaminated/corrupted by noise, and often with noise of unknown nature. That's one of the reasons why deterministic models can be inconsistent, since they treat the measurements as values of some unknown function that should be interpolated. Kriging estimators treat the measurements as the realization of some spatial randomn process. To obtain the estimation with kriging one has to model the spatial structure of the data: spatial correlation function or (semi-)variogram. This task can be complicated if there is not sufficient number of measurements and variogram is sensitive to outliers and extremes. ANN is a powerful tool, but it also suffers from the number of reasons. of a special type ? multiplayer perceptrons ? are often used as a detrending tool in hybrid (ANN+geostatistics) models (Kanevski and Maignank, 2004). Therefore, development and adaptation of the method that would be nonlinear and robust to noise in measurements, would deal with the small empirical datasets and which has solid mathematical background is of great importance. The present paper deals with such model, based on Statistical Learning Theory (SLT) - Support Vector Regression. SLT is a general mathematical framework devoted to the problem of estimation of the dependencies from empirical data (Hastie et al, 2004; Vapnik, 1998). SLT models for classification - Support Vector Machines - have shown good results on different machine learning tasks. The results of SVM classification of spatial data are also promising (Kanevski et al, 2002). The properties of SVM for regression - Support Vector Regression (SVR) are less studied. First results of the application of SVR for spatial mapping of physical quantities were obtained by the authorsin for mapping of medium porosity (Kanevski et al, 1999), and for mapping of radioactively contaminated territories (Kanevski and Canu, 2000). The present paper is devoted to further understanding of the properties of SVR model for spatial data analysis and mapping. Detailed description of the SVR theory can be found in (Cristianini and Shawe-Taylor, 2000; Smola, 1996) and basic equations for the nonlinear modeling are given in section 2. Section 3 discusses the application of SVR for spatial data mapping on the real case study - soil pollution by Cs137 radionuclide. Section 4 discusses the properties of the modelapplied to noised data or data with outliers.

Basal cell carcinoma - molecular biology and potential new therapies.

Basal cell carcinoma (BCC) of the skin, the most common malignancy in individuals of mixed European descent, is increasing in incidence due to an aging population and sun exposure habits. The realization that aberrant activation of Hedgehog signaling is a pathognomonic feature of BCC development has opened the way for exciting progress toward understanding BCC biology and translation of this knowledge to the clinic. Genetic mouse models closely mimicking human BCCs have provided answers about the tumor cell of origin, and inhibition of Hedgehog signaling is emerging as a potentially useful targeted therapy for patients with advanced or multiple BCCs that have hitherto lacked effective treatment.

Computational analysis of the genetic and environmental contributions to disease-related human phenotypes: From predicting adverse lipid response of HIV patients receiving antiretroviral therapy to genome-wide association studies of cardiovascular and lipid related disorders

Genetic variants influence the risk to develop certain diseases or give rise to differences in drug response. Recent progresses in cost-effective, high-throughput genome-wide techniques, such as microarrays measuring Single Nucleotide Polymorphisms (SNPs), have facilitated genotyping of large clinical and population cohorts. Combining the massive genotypic data with measurements of phenotypic traits allows for the determination of genetic differences that explain, at least in part, the phenotypic variations within a population. So far, models combining the most significant variants can only explain a small fraction of the variance, indicating the limitations of current models. In particular, researchers have only begun to address the possibility of interactions between genotypes and the environment. Elucidating the contributions of such interactions is a difficult task because of the large number of genetic as well as possible environmental factors.In this thesis, I worked on several projects within this context. My first and main project was the identification of possible SNP-environment interactions, where the phenotypes were serum lipid levels of patients from the Swiss HIV Cohort Study (SHCS) treated with antiretroviral therapy. Here the genotypes consisted of a limited set of SNPs in candidate genes relevant for lipid transport and metabolism. The environmental variables were the specific combinations of drugs given to each patient over the treatment period. My work explored bioinformatic and statistical approaches to relate patients' lipid responses to these SNPs, drugs and, importantly, their interactions. The goal of this project was to improve our understanding and to explore the possibility of predicting dyslipidemia, a well-known adverse drug reaction of antiretroviral therapy. Specifically, I quantified how much of the variance in lipid profiles could be explained by the host genetic variants, the administered drugs and SNP-drug interactions and assessed the predictive power of these features on lipid responses. Using cross-validation stratified by patients, we could not validate our hypothesis that models that select a subset of SNP-drug interactions in a principled way have better predictive power than the control models using "random" subsets. Nevertheless, all models tested containing SNP and/or drug terms, exhibited significant predictive power (as compared to a random predictor) and explained a sizable proportion of variance, in the patient stratified cross-validation context. Importantly, the model containing stepwise selected SNP terms showed higher capacity to predict triglyceride levels than a model containing randomly selected SNPs. Dyslipidemia is a complex trait for which many factors remain to be discovered, thus missing from the data, and possibly explaining the limitations of our analysis. In particular, the interactions of drugs with SNPs selected from the set of candidate genes likely have small effect sizes which we were unable to detect in a sample of the present size (<800 patients).In the second part of my thesis, I performed genome-wide association studies within the Cohorte Lausannoise (CoLaus). I have been involved in several international projects to identify SNPs that are associated with various traits, such as serum calcium, body mass index, two-hour glucose levels, as well as metabolic syndrome and its components. These phenotypes are all related to major human health issues, such as cardiovascular disease. I applied statistical methods to detect new variants associated with these phenotypes, contributing to the identification of new genetic loci that may lead to new insights into the genetic basis of these traits. This kind of research will lead to a better understanding of the mechanisms underlying these pathologies, a better evaluation of disease risk, the identification of new therapeutic leads and may ultimately lead to the realization of "personalized" medicine.

Kiinteistön sähköisen huoltokirjan kehittäminen

Ympäristöministeriö edellyttää kaikilta vuoden 2000 jälkeen valmistuneilta tai peruskorjatuilta asuinkiinteistöiltä huoltokirjaa. Huoltokirja on kiinteistön ylläpitoon liittyvä asiakirjakokonaisuus, johon kootaan kaikki tarvittavat tiedot kiinteistöstä ja sen hoidosta. Tämän diplomityön tavoitteena oli toteuttaa sähköinen huoltokirjajärjestelmä asuinkiinteistöille. Järjestelmän haluttiin palvelevan isännöitsijöiden ja huoltoyhtiöiden lisäksi myös kiinteistön omistajia, asukkaita, rakennuttajia ja kiinteistön välittäjiä. Tästä syystä järjestelmästä haluttiin Internet-selaimella käytettävä verkkopalvelu. Diplomityöhön kuului järjestelmän suunnittelu, toteutus ja testaus. Työn lopputuloksena syntynyt Pihapiiri.com järjestelmä otettiin käyttöön syksyllä 2002. Projektin aikanahavaittiin, että huoltokirjoja koskevat määrittelyt ja standardit olivat vasta kehitteillä. e-EHYT-hanke (elinkaarihallinnan yhteiset ydintie dot sähköisissä huoltokirjoissa) on merkittävä edistysaskel huoltokirjajärjestelmien sisällön ja tiedonsiirron standardoinnissa. Uusissa tuotekehityshankkeissa ja nykyisten huoltokirjajärjestelmien jatkokehityshankkeissa on olennaista huomioida e-EHYT-määritysten sekä yhteistyöverkoston merkitys. Käyttäjät ovat kritisoineet markkinoilla olevia tuotteita liian tarkoiksi. Liian teknisiä ja raskaita ratkaisuja tulee välttää varsinkin silloin kun tuotetta suunnitellaan asunto-osakeyhtiöille ja pientalo-omistajille.

Motives, Challenges and Success Factors in the Business Partner Network

Tässä työssä käsitellään niitä motiiveja, haasteita ja menestystekijöitä, jotka vaikuttavat lisäarvoatuottavassa liiketoimintaverkostossa. Työssä on selvitetty sitä, miten partneriverkostot syntyvät sekä mitkä seikat vaikuttavat siihen jatkuuko yhteistyö vai ei. Motiiveja partneruuteen on tutkittu kirjallisuudesta sekä analysoimalla työssä esitettyä tapausta. Tässä työssä käydään keskustelua myös partneruuden elinkaaresta, jota ei ole käsitellyssä kirjallisuudessa tuotu esille. Työssä esitettyä tapausta arvioitiin lähettämällä siihen liittyneille henkilöille kysely. Kyselyiden lähettämisen jälkeen järjestettiin haastattelu kyselyyn vastanneiden kanssa. Lopputulokset perustuvat pitkälti haastateltujen henkilöiden kanssa käytyihin keskusteluihin. Kävi ilmi, että arvoa tuottavan partneriverkoston yksi tärkeimpiä tavoitteita on saavuttaa jatkuvuutta liiketoiminnallaan. Ainoastaan pitkäaikaisella partneruudella voidaan saavuttaa merkittäviä etuja markkinoilla. Siksi on tärkeätä, jo partnerin valinnassa, kiinnittää huomiota partneruuden jatkuvuuteen pitkällä tähtäimellä. Liiketoimintaverkostossa partneruudesta syntyvät tuotot ja niiden jakaminen on tärkein yksittäinen osaalue. Oleellista partneruuden jatkuvuudelle pitkällä tähtäimellä on jo partneria valittaessa se, että kyetään arvioimaan miten partneruudesta syntyvät tuotot jaetaan tasapuolisesti ja onko partneruudesta syntyvälle liiketoiminnalle jatkuvuutta. Jotta partneriverkostolle asetetut tavoitteet voitaisiin saavuttaa, on tärkeää suunnitella partneriverkoston hallintaa myös operatiivisella tasolla. Lisäksi tärkeää on jakaa verkostolle asetetut yhteiset tavoitteet organisaatioiden sisällä. Jos ylemmänja operatiivisen tason johdon yhteistyö on riittämätöntä, se vaikeuttaa oleellisesti asetettujen tavoitteiden saavuttamista. Tiedon jakaminen aikaisessa vaiheessa sitouttaa eri sidosryhmät paremmin yhteisiin tavoitteisiin.

WWW-sivuston kävijäseurannan uudistaminen

Julkisista WWW-sivustoista on tullut yrityksille tärkeitä markkinointikanavia ja niiden kehittämiseen ja ylläpitoon panostetaan yhä enemmän. Yritykset tarvitsevat kuitenkin myös mahdollisuuden mitata sivuston tavoitteiden onnistumista. Tähän tarkoitukseen on kehitetty erilaisia kävijäseurantaohjelmistoja, jotka raportoivat sivuston kävijäliikenteen määriä ja asetettujen tavoitteiden toteutumista. Tässä työssä käsitellään WWW-sivustojen kävijäseurannan mahdollisuuksia ja erilaisia seurantaan soveltuvia menetelmiä.Suosituimpia menetelmiä ovat WWW-palvelimen lokitiedostojen analysointi, evästeet ja sivuihin upotettavat jäljitteet. Työssä mietittiin myös yksityisyyden suojaa, joka tulee ottaa huomioon, kun kävijöistä aletaan kerätä tietoa. Työn tarkoituksena oli löytää Vaisalan sivustoille sopiva kävijäseurantamenetelmä ja uusi ohjelmisto, joka toteuttaa tarvittavat vaatimukset. Mahdollisia kävijäseurantaohjelmistoja testattiin Vaisalan julkisella WWW-sivustolla ja testaustulosten perusteella otettiin käyttöön jäljitteillä toimiva kävijäseurantaohjelmisto. Ohjelmiston avulla saadaan huomattavasti aikaisempaa tarkempaa tietoa WWW-sivujen käytöstä. Uusi tieto helpottaa sivuston kehitystyötä ja sitä käytetään myös markkinoinnin ja erilaisten tulosmittarien tarpeisiin.

Ympäristöjärjestelmän toteuttamisen edellytykset Lappeenrannan teknillisellä yliopistolla

Lappeenrannan teknilliselle yliopistolle tehtävässä ympäristösuunnitelmassa tavoitteena on selvittää Senaatti-kiinteistöjen ympäristöjärjestelmän tavoitteiden toteutettavuus yliopistolla, löytää yliopiston merkittävimmät ympäristövaikutukset sekä asettaa ympäristöasioiden hoidolle päämääriä ja tavoitteita.Diplomityön on tarkoitus toimia jatkossa tukimateriaalina ympäristöasioiden hoidon kehittämiselle. Teoriaosassa on esitetty ympäristöjärjestelmän rakentaminen ja tavoitteet sekä käyty läpi ympäristösuunnitelman toteuttamista. Tutkimusosassa laaditaan Senaatti-kiinteistön ympäristöjärjestelmän toteuttamisen esittelyn jälkeen yliopiston ympäristösuunnitelma. Yliopiston tämänhetkiset ympäristökäytännöt kartoitetaan sekä toimintaa koskevat ympäristönäkökohdat tunnistetaan ja arvotetaan. Merkittävien ympäristönäkökohtien valitsemisen jälkeen yliopistolle on laadittu ehdotukset hankintoja, jätehuoltoa ja sähkön kulutusta koskevista ympäristöohjelmista. Ympäristöohjelmissa ehdotetaan päämääriä, tavoitteita sekä käytännön ohjeita ja seurantaa toimintojen kehittämistä varten.