Wear resistance of experimental titanium alloys for dental applications

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Membranas de quitosana micro e macroporosas : preparo, caracterização e estudos de permeabilidade

Two methodologies were proposed to obtain micro and macroporous chitosan membranes, using two different porogenic agents. The methodologies proved to be effective in control the porosity as well as the pore size. Thus, microporous membranes were obtained through the physical blend of chitosan and polyethylene oxide (PEO) on an 80:20 (m/m) ratio, respectively, followed by the partial PEO solubilization in water at 80 ◦C. Macroporous chitosan membranes with asymmetric morphology were obtained using SiO2 as the porogenic agent. In this case, chiotsan-silica ratios used were 1:1, 1:3 and 1:5 (m/m). Membranes characterization were carried out by SEM (scanning electronic microscopy), X-ray diffraction, Fourier Transform Infrared Spectroscopy (FTIR), Thermal analysis (TG, DTG , DSC and DMTA). Permeability studies were performed using two model drugs: sodium sulfamerazine and sulfametoxipyridazine. By transmission FTIR it was possible to confirm the complete removal of SiO2. The SEM images confirmed the porous formation for both micro and macroporous membranes and also determined their respective sizes. By thermal analysis it was possible to show differences related with water sorption capacity as well as thermal stability for both membranes. DTG and DSC allowed evidencing the PEO presence on microporous membranes. The absorbance x time curves obtained on permeability tests for micro and macroporous membranes showed a linear behavior for both drugs in all range of concentration used. It was also observed, through P versus C curves, an increase in permeability of macroporous membranes according to the increase in porosity and also a decrease on P with increase in drug concentration. The influences of the drug molecular structure, as well as test temperatures were also evaluated

Infrared spectroscopy: a tool for determination of the degree of conversion in dental composites

Infrared spectroscopy is one of the most widely used techniques for measurement of conversion degree in dental composites. However, to obtain good quality spectra and quantitative analysis from spectral data, appropriate expertise and knowledge of the technique are mandatory. This paper presents important details to use infrared spectroscopy for determination of the conversion degree.

Open photoacoustic cell for thermal diffusivity measurements of a fast hardening cement used in dental restoring

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Preparo do solo e doses de nitrogênio em cobertura em arroz de terras altas

As influências do sistema de preparo do solo e da adubação nitrogenada não estão bem definidas para o arroz de terras altas. Assim, com o objetivo de avaliar os componentes da produtividade e o rendimento industrial do arroz de terras altas irrigado por aspersão, em função do preparo do solo e de doses de nitrogênio em cobertura, conduziu-se o experimento em condições de campo, em Selvíria (MS), por duas safras consecutivas: 2003/2004 (cultivar BRS Talento) e 2004/2005 (cultivar IAC 202). Adotou-se o delineamento em blocos casualizados, constituído pela combinação de três manejos de solo (grade aradora + grade niveladora, escarificador + grade niveladora e plantio direto) e seis doses de N em cobertura (0 kg ha-1, 25 kg ha-1, 50 kg ha-1, 75 kg ha-1, 100 kg ha-1 e 125 kg ha-1), com quatro repetições. Avaliou-se a concentração de N na folha, altura de plantas, componentes de produção, produtividade e o rendimento industrial dos grãos. O preparo do solo com escarificador + grade niveladora propiciou a obtenção de maiores produtividades das duas cultivares, enquanto a adubação nitrogenada em cobertura interferiu apenas na produtividade da cultivar IAC 202, sem afetar o rendimento industrial de grãos.

Resposta de cultivares de arroz de sequeiro ao preparo do solo e à irrigação por aspersão

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Rotação de culturas e propriedades físicas e químicas em Latossolo Vermelho de Cerrado sob preparo convencional e semeadura direta em adoção

O manejo inadequado do solo tem promovido a degradação de suas propriedades físicas, químicas e biológicas. O objetivo deste trabalho foi avaliar, após três anos da instalação de sistemas de manejo do solo, os efeitos da rotação com adubo verde, soja ou milho (verão) e feijão de inverno, sendo utilizadas as seguintes espécies na adubação verde: mucuna-preta, milheto, crotalária e guandu, nas propriedades físicas e químicas de um Latossolo Vermelho distroférrico e na produtividade das culturas. Outro tratamento foi adicionado como alternativa à adubação verde, o pousio. Os sistemas de manejo do solo foram: semeadura direta não consolidada e preparo convencional. O estudo foi realizado em Selvíria-MS, no ano agrícola de 1999/2000. O delineamento experimental foi em blocos casualizados com parcelas subdivididas e quatro repetições. O sistema de semeadura direta, após três anos de instalada a rotação, degradou mais as propriedades físicas do solo na camada superficial. Por outro lado, neste sistema e camada de solo, houve acréscimo no teor de matéria orgânica e no pH, bem como na produtividade do milho, superior à do sistema de preparo convencional. O feijão em rotação à cultura do milho, na semeadura convencional, e em rotação à soja, na semeadura direta, foi a melhor opção quanto à produtividade.

Preparo do solo, irrigação por aspersão e rendimento de engenho do arroz de terras altas

O rendimento de engenho obtido após o beneficiamento industrial é um parâmetro importante durante a fase de comercialização do arroz e pode ser influenciado pelas práticas culturais realizadas durante o período de cultivo. O presente trabalho teve como objetivo avaliar o rendimento de benefício, rendimento de inteiros e grãos quebrados de cultivares de arroz de sequeiro em função do preparo do solo e da irrigação por aspersão na região de Selvíria - MS, durante os anos agrícolas de 1997/98 e 1998/99. O solo do local é do tipo Latossolo Vermelho álico, textura argilosa e os tratamentos consistiram na combinação de três cultivares de arroz (IAC 201, Carajás e Guarani), com três sistemas de preparo do solo (arado de aiveca + grade niveladora, escarificador + grade niveladora e grade pesada + grade niveladora) e três níveis de irrigação por aspersão (sequeiro e duas lâminas de água), com quatro repetições. O cultivar IAC 201 apresenta maior rendimento de benefício e o Carajás destaca-se dos demais em rendimento de inteiros; os diferentes sistemas de preparo utilizados praticamente não interferem no rendimento de engenho; a irrigação por aspersão aumenta o rendimento de benefício e o rendimento de inteiros, principalmente em ano com ocorrência de veranico.

Preparo e caracterização de membranas de quitosana modificadas com poli (ácido acrílico)

The aim of this study was to generate an asymmetric biocompactible and biodegradable chitosan membrane modified by the contact with a poly(acrylic acid) solution at one of its sides at room temperature and 60◦C. The pure chitosan membrane, as well as the ones treated with poly(acrylic acid) were characterized by infrared spectroscopy (FTIRATR) at angles of 39◦, 45◦ and 60◦ , swelling capacity in water, thermal analysis (TG/DTG), scanning electronic microscopy (SEM) and permeation experiments using metronidazole at 0,1% and 0,2% as a model drug. The results confirmed the presence of ionic interaction between chitosan and poly(acrylic acid) by means of a polyelectrolyte complex (PEC) formation. They also showed that such interactions were more effective at 60◦C since this temperature is above the chitosan glass transition temperature wich makes the diffusion of poly(acrylic acid) easier, and that the two treated membranes were asymmetrics, more thermically stable and less permeable in relation to metronidazole than the pure chitosan membrane

Atributos químicos de um latossolo vermelho sob diferentes sistemas de preparo, adubações e plantas de cobertura

Os sistemas de preparo do solo e tipos de adubações levam à disposição diferenciada dos elementos minerais no perfil do solo, influenciando os seus atributos químicos. O objetivo deste trabalho foi verificar as alterações de alguns atributos químicos de um Latossolo Vermelho de cerrado, sob as adubações orgânica e mineral e plantas de cobertura, estabelecidas nos sistemas de semeadura direta e preparo convencional, sendo cultivado com feijão de inverno e algodão. O delineamento experimental utilizado foi em blocos casualizados com parcelas subdivididas. Nas parcelas foram instalados dois tratamentos (semeadura direta e preparo convencional) e, nas subparcelas, seis (esterco de galinha, esterco de galinha + metade da adubação mineral recomendada, adubação mineral, crotalária, milheto e testemunha). Foram avaliados P, MO, pH, K+, Ca2+, Mg2+, H + Al, Al3+, SB, CTCe e V nas camadas de solo de 0,00-0,10 e 0,10-0,20 m. O uso do adubo orgânico isolado ou associado com adubação mineral contribuiu para os melhores resultados dos atributos químicos do solo avaliados; as plantas de cobertura apresentaram-se semelhantes quanto aos efeitos nas propriedades químicas do solo; e a distribuição dos elementos minerais na camada superficial do solo (0,00-0,20 m) teve comportamento semelhante entre a semeadura direta e o preparo convencional.

Qualidade de vida de pacientes com deformidade dentofacial

In the last decade, an increasing number of studies focusing on the impact of oral deformities on quality of life have been published. However, the evaluation of patients at different phases of the treatment has not been performed. Therefore, the purpose of this study was to determine the impact that dentofacial deformities have on patients` quality of life, as well as the influence exerted by social, economic, demographic and orthodontic factors, type and severity of malocclusion. A bicentric study - of the cross-sectional type of repeated panels - involving two cities - Natal and Rio de Janeiro - was carried out. A total of 227 patients participated in the study: 71 patients in the initial phase of the treatment (before any orthosurgical procedure), 115 patients in the pre-surgical (with braces) phase and 41 patients in the postoperative phase. The quality of life was measured using the Orthognatic Quality of Life Questionnnaire - OQLQ, translated and validated into Portuguese. The normative and aesthetic need for treatment was assessed with the Index of Orthodontic Treatment Need (IOTN) and the Dental Aesthetic Index (DAI); the social, economic and demographic factors, the type of service and malocclusion were also assessed. The data were analyzed through χ2/ Fisher`s exact test to seek the association between the nominal categorical variables in the three phases of treatment, Mann Whitney and Kruskal-Wallis test for gauging the existence of significant differences between two and three groups regarding each domain of OQLQ, respectively. For all tests, it was adopted a significance level of 5%. There was a statistically significant difference (p <0.001) in the general scores of OQLQ and in the domains of social aspects, facial aesthetics and oral function, when the "postoperative group" was compared to the "initial" and "orthodontic preparation" groups. Women, single, aged between 31 and 59 and living in Natal had the greatest impact on quality of life among patients in the "orthodontic preparation" group. Only the variable "income" (2 to 3 minimum wages), for the "initial" group, and gender (female) for the "postoperative" group, showed significant association with quality of life. The normative variable IOTN (DHC and AC) showed significant association with the OQLQ for the "initial" group, and the IOTN-AC-auto in the group of orthodontic preparation, being less important to women. We conclude that the ortho-surgical therapy has positive effects on quality of life after orthognathic surgery

Assessment of genetic relationship between Klebsiella pneumoniae and Klebsiella oxytoca samples isolated from a dental office

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Assessment of genetic damage induced by dental bleaching agents on mouse lymphoma cells by single cell gel (comet) assay

Dental bleaching is a simple and conservative procedure for aesthetic restoration of vital discoloured teeth. However, dental bleaching agents may represent a hazard to human health, especially by causing DNA strand breaks. Genotoxicity tests form an important part of cancer research and risk assessment of potential carcinogens. In the current study, the genotoxic potential associated with exposure to dental bleaching agents was assessed by the single cell gel (comet) assay in vitro. Six commercial dental bleaching agents (Clarigel Gold - Dentsply; Whitespeed - Discus Dental; Nite White - Discus Dental; Magic Bleaching - Vigodent; Whiteness HP - FGM and Lase Peroxide - DMC) were exposed to mouse lymphoma cells in vitro. The results pointed out that all dental bleaching agents tested contributed to the DNA damage as depicted by the mean tail moment. Clear concentration-related effects were obtained for DNA damaging, being the strongest effect observed at the highest dose of the hydrogen peroxide (Whiteness HP and Lase Peroxide, at 35% concentration). on the contrary, Whitespeed (Discus Dental) induced the lowest level of DNA breakage. Taken together, these results suggest that dental bleaching agents may be a factor that increases the level of DNA damage as detected by the single cell gel (comet) assay.

Expression of cell cycle regulatory proteins in epithelial components of dental follicles

Dental follicle is a component of tooth germs, which remain adjacent to the crown of unerupted or impacted teeth. Under the influence of pathologic changes, however, dental follicles that possess reduced epithelium can proliferate into stratified squamous epithelium as far as originate dental cysts. In order to clarify the role of apoptosis and cellular proliferation herein, expression of p53 and PCNA was examined in epithelial components of dental follicles associated with impacted third molars by means of immunohistochemistry. A total of 40 cases was included in this study being 22 cases with reduced epithelium and 18 cases with stratified epithelium. Expression of p53 expression was weak or not detected in dental follicles with reduced and stratified squamous epithelium. By contrast, PCNA positive cells were evidenced in basal and supra basal layers of the stratified squamous epithelium and in reduced epithelium of dental follicles, but without any significant statistically differences between them (P > 0.05). In conclusion, these data suggest that dental follicles possess proliferative activity as depicted by PCNA-positive nuclei in some epithelial cells. However, the biological behavior of dental follicles during the late stage of dental eruptive process may not be associated with deregulation of death and/or cell proliferation.

Avaliação da eficácia de diferentes protocolos de preparo do Plasma Rico em Plaquetas para uso em Medicina Equina

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)