Dimerization specificity of Arabidopsis MADS domain homeotic proteins APETALA1, APETALA3, PISTILLATA, and AGAMOUS.

The MADS domain homeotic proteins APETALA1 (AP1), APETALA3 (AP3), PISTILLATA (PI), and AGAMOUS (AG) act in a combinatorial manner to specify the identity of Arabidopsis floral organs. The molecular basis for this combinatorial mode of action was investigated. Immunoprecipitation experiments indicate that all four proteins are capable of interacting with each other. However, these proteins exhibit "partner-specificity" for the formation of DNA-binding dimers; only AP1 homodimers, AG homodimers, and AP3/PI heterodimers are capable of binding to CArG-box sequences. Both the AP3/PI heterodimer and the AP1 or AG homodimers are formed when the three corresponding proteins are present together. The use of chimeric proteins formed by domain swapping indicates that the L region (which follows the MADS box) constitutes a key molecular determinant for the selective formation of DNA-binding dimers. The implications of these results for the ABC genetic model of flower development are discussed.

Neuregulins with an Ig-like domain are essential for mouse myocardial and neuronal development.

Neuregulins are ligands for the erbB family of receptor tyrosine kinases and mediate growth and differentiation of neural crest, muscle, breast cancer, and Schwann cells. Neuregulins contain an epidermal growth factor-like domain located C-terminally to either an Ig-like domain or a cysteine-rich domain specific to the sensory and motor neuron-derived isoform. Here it is shown that elimination of the Ig-like domain-containing neuregulins by homologous recombination results in embryonic lethality associated with a deficiency of ventricular myocardial trabeculation and impairment of cranial ganglion development. The erbB receptors are expressed in myocardial cells and presumably mediate the neuregulin signal originating from endocardial cells. The trigeminal ganglion is reduced in size and lacks projections toward the brain stem and mandible. We conclude that IgL-domain-containing neuregulins play a major role in cardiac and neuronal development.

The Moldable Inspector

Object inspectors are an essential category of tools that allow developers to comprehend the run-time of object-oriented systems. Traditional object inspectors favor a generic view that focuses on the low-level details of the state of single objects. Based on 16 interviews with software developers and a follow-up survey with 62 respondents we identified a need for object inspectors that support different high-level ways to visualize and explore objects, depending on both the object and the current developer need. We propose the Moldable Inspector, a novel inspector model that enables developers to adapt the inspection workflow to suit their immediate needs by making the inspection context explicit, providing multiple interchangeable domain-specific views for each object, and supporting a workflow that groups together multiple levels of connected objects. We show that the Moldable Inspector can address multiple kinds of development needs involving a wide range of objects.

Towards moldable development tools

Developers commonly ask detailed and domain-specific questions about the software systems they are developing and maintaining. Integrated development environments (IDEs) form an essential category of tools for developing software that should support software engineering decision making. Unfortunately, rigid and generic IDEs that focus on low-level programming tasks, that promote code rather than data, and that suppress customization, offer limited support for informed decision making during software development. We propose to improve decision making within IDEs by moving from generic to context-aware IDEs through moldable tools. In this paper, we promote the idea of moldable tools, illustrate it with concrete examples, and discuss future research directions.

Comparisons between analogue and numerical models of thrust wedge development

Analogue and finite element numerical models with frictional and viscous properties are used to model thrust wedge development. Comparison between model types yields valuable information about analogue model evolution, scaling laws and the relative strengths and limitations of the techniques. Both model types show a marked contrast in structural style between ‘frictional-viscous domains’ underlain by a thin viscous layer and purely ‘frictional domains’. Closely spaced thrusts form a narrow and highly asymmetric fold-and-thrust belt in the frictional domain, characterized by in-sequence propagation of forward thrusts. In contrast, the frictional-viscous domain shows a wide and low taper wedge and a thrust belt with a more symmetrical vergence, with both forward and back thrusts. The frictional-viscous domain numerical models show that the viscous layer initially simple shears as deformation propagates along it, while localized deformation resulting in the formation of a pop-up structure occurs in the overlying frictional layers. In both domains, thrust shear zones in the numerical model are generally steeper than the equivalent faults in the analogue model, because the finite element code uses a non-associated plasticity flow law. Nevertheless, the qualitative agreement between analogue and numerical models is encouraging. It shows that the continuum approximation used in numerical models can be used to model frictional materials, such as sand, provided caution is taken to properly scale the experiments, and some of the limitations are taken into account.

Innovation and Development in the Age of Climate Change Adaptation: Open or Closed?

Change Adaptation: Open or Closed? Paper read at the Second African International Economic Law Network Conference, 7-8 March 2013, Wits School of Law, Johannesburg, South Africa. In a time of rapid convergence of technologies, goods, services, hardware, software, the traditional classifications that informed past treaties fail to remove legal uncertainty, or advance welfare and innovation. As a result, we turn our attention to the role and needs of the public domain at the interface of existing intellectual property rights and new modes of creation, production and distribution of goods and services. The concept of open culture would have it that knowledge should be spread freely and its growth should come from further developing existing works on the basis of sharing and collaboration without the shackles of intellectual property. Intellectual property clauses find their way into regional, multilateral, bilateral and free trade agreements more often than not, and can cause public discontent and incite unrest. Many of these intellectual property clauses raise the bar on protection beyond the clauses found in the WTO Agreement on Trade-Related Aspects of Intellectual Property Rights (TRIPS). In this paper we address the question of the protection and development of the public domain in service of open innovation in accord with Article 15 of the International Covenant on Economic, Social and Cultural Rights (ICESCR) in light of the Objectives (Article 7) and Principles (Article 8) set forth in TRIPS. Once areas of divergence and reinforcement between the intellectual property regime and human rights have been discussed, we will enter into options that allow for innovation and prosperity in the global south. We then conclude by discussing possible policy developments.

Fitness assessment of document model

Document classification is a supervised machine learning process, where predefined category labels are assigned to documents based on the hypothesis derived from training set of labelled documents. Documents cannot be directly interpreted by a computer system unless they have been modelled as a collection of computable features. Rogati and Yang [M. Rogati and Y. Yang, Resource selection for domain-specific cross-lingual IR, in SIGIR 2004: Proceedings of the 27th annual international conference on Research and Development in Information Retrieval, ACM Press, Sheffied: United Kingdom, pp. 154-161.] pointed out that the effectiveness of document classification system may vary in different domains. This implies that the quality of document model contributes to the effectiveness of document classification. Conventionally, model evaluation is accomplished by comparing the effectiveness scores of classifiers on model candidates. However, this kind of evaluation methods may encounter either under-fitting or over-fitting problems, because the effectiveness scores are restricted by the learning capacities of classifiers. We propose a model fitness evaluation method to determine whether a model is sufficient to distinguish positive and negative instances while still competent to provide satisfactory effectiveness with a small feature subset. Our experiments demonstrated how the fitness of models are assessed. The results of our work contribute to the researches of feature selection, dimensionality reduction and document classification.

A reference architecture for instructional educational software

Our extensive research has indicated that high-school teachers are reluctant to make use of existing instructional educational software (Pollard, 2005). Even software developed in a partnership between a teacher and a software engineer is unlikely to be adopted by teachers outside the partnership (Pollard, 2005). In this paper we address these issues directly by adopting a reusable architectural design for instructional educational software which allows easy customisation of software to meet the specific needs of individual teachers. By doing this we will facilitate more teachers regularly using instructional technology within their classrooms. Our domain-specific software architecture, Interface-Activities-Model, was designed specifically to facilitate individual customisation by redefining and restructuring what constitutes an object so that they can be readily reused or extended as required. The key to this architecture is the way in which the software is broken into small generic encapsulated components with minimal domain specific behaviour. The domain specific behaviour is decoupled from the interface and encapsulated in objects which relate to the instructional material through tasks and activities. The domain model is also broken into two distinct models - Application State Model and Domainspecific Data Model. This decoupling and distribution of control gives the software designer enormous flexibility in modifying components without affecting other sections of the design. This paper sets the context of this architecture, describes it in detail, and applies it to an actual application developed to teach high-school mathematical concepts.

A tool for a formal pattern modeling language

This paper presents a formal but practical approach for defining and using design patterns. Initially we formalize the concepts commonly used in defining design patterns using Object-Z. We also formalize consistency constraints that must be satisfied when a pattern is deployed in a design model. Then we implement the pattern modeling language and its consistency constraints using an existing modeling framework, EMF, and incorporate the implementation as plug-ins to the Eclipse modeling environment. While the language is defined formally in terms of Object-Z definitions, the language is implemented in a practical environment. Using the plug-ins, users can develop precise pattern descriptions without knowing the underlying formalism, and can use the tool to check the validity of the pattern descriptions and pattern usage in design models. In this work, formalism brings precision to the pattern language definition and its implementation brings practicability to our pattern-based modeling approach.

MQL: A powerful extension to OCL for MOF queries

The Meta-Object Facility (MOF) provides a standardized framework for object-oriented models. An instance of a MOF model contains objects and links whose interfaces are entirely derived from that model. Information contained in these objects can be accessed directly, however, in order to realize the Model-Driven Architecture@trade; (MDA), we must have a mechanism for representing and evaluating structured queries on these instances. The MOF Query Language (MQL) is a language that extends the UML's Object Constraint Language (OCL) to provide more expressive power, such as higher-order queries, parametric polymorphism and argument polymorphism. Not only do these features allow more powerful queries, but they also encourage a greater degree of modularization and re-use, resulting in faster prototyping and facilitating automated integrity analysis. This paper presents an overview of the motivations for developing MQL and also discusses its abstract syntax, presented as a MOF model, and its semantics

Characterization of the structure of RAMP1 by mutagenesis and molecular modeling

Receptor activity modifying proteins (RAMPs) are a family of single-pass transmembrane proteins that dimerize with G-protein-coupled receptors. They may alter the ligand recognition properties of the receptors (particularly for the calcitonin receptor-like receptor, CLR). Very little structural information is available about RAMPs. Here, an ab initio model has been generated for the extracellular domain of RAMP1. The disulfide bond arrangement (Cys 27-Cys82, Cys40-Cys72, and Cys 57-Cys104) was determined by site-directed mutagenesis. The secondary structure (a-helices from residues 29-51, 60-80, and 87-100) was established from a consensus of predictive routines. Using these constraints, an assemblage of 25,000 structures was constructed and these were ranked using an all-atom statistical potential. The best 1000 conformations were energy minimized. The lowest scoring model was refined by molecular dynamics simulation. To validate our strategy, the same methods were applied to three proteins of known structure; PDB:1HP8, PDB:1V54 chain H (residues 21-85), and PDB:1T0P. When compared to the crystal structures, the models had root mean-square deviations of 3.8 Å, 4.1 Å, and 4.0 Å, respectively. The model of RAMP1 suggested that Phe93, Tyr 100, and Phe101 form a binding interface for CLR, whereas Trp74 and Phe92 may interact with ligands that bind to the CLR/RAMP1 heterodimer. © 2006 by the Biophysical Society.

Using architecture models to support the generation and operation of component-based adaptive systems

Modelling architectural information is particularly important because of the acknowledged crucial role of software architecture in raising the level of abstraction during development. In the MDE area, the level of abstraction of models has frequently been related to low-level design concepts. However, model-driven techniques can be further exploited to model software artefacts that take into account the architecture of the system and its changes according to variations of the environment. In this paper, we propose model-driven techniques and dynamic variability as concepts useful for modelling the dynamic fluctuation of the environment and its impact on the architecture. Using the mappings from the models to implementation, generative techniques allow the (semi) automatic generation of artefacts making the process more efficient and promoting software reuse. The automatic generation of configurations and reconfigurations from models provides the basis for safer execution. The architectural perspective offered by the models shift focus away from implementation details to the whole view of the system and its runtime change promoting high-level analysis. © 2009 Springer Berlin Heidelberg.

Summary of the 7th international workshop on Models@run.time

The Models@run.time (MRT) workshop series offers a discussion forum for the rising need to leverage modeling techniques for the software of the future. The main goals are to explore the benefits of models@run.time and to foster collaboration and cross-fertilization between different research communities like for example like model-driven engineering (e.g. MODELS), self-adaptive/autonomous systems communities (e.g., SEAMS and ICAC), the control theory community and the artificial intelligence community. © 2012 Authors.

Semantic Modelling for Product Line Engineering

The aim of our work is to present solutions and a methodical support for automated techniques and procedures in domain engineering, in particular for variability modeling. Our approach is based upon Semantic Modeling concepts, for which semantic description, representation patterns and inference mechanisms are defined. Thus, model-driven techniques enriched with semantics will allow flexibility and variability in representation means, reasoning power and the required analysis depth for the identification, interpretation and adaptation of artifact properties and qualities.

Production-frame Model of Representation of Data Domain

One of the most important problems of e-learning system is studied in given paper. This problem is building of data domain model. Data domain model is based on usage of correct organizing knowledge base. In this paper production-frame model is offered, which allows structuring data domain and building flexible and understandable inference system, residing in production system.