Decision rules and information provision: monitoring versus manipulation

The paper focuses on the organization of institutions designed to resolve disputes between two parties, when some information is not veriable and decision makers may have vested preferences. It shows that the choice of how much discretional power to grant to the decision maker and who provides the information are intrinsically related. Direct involvement of the interested parties in the supply of information enhances monitoring over the decision maker, although at the cost of higher manipulation. Thus, it is desirable when the decision maker is granted high discretion. On the contrary, when the decision maker has limited discretional power, information provision is better assigned to an agent with no direct stake. The analysis helps to rationalize some organizational arrangements that are commonly observed in the context of judicial and antitrust decision-making.

Implicações gerenciais para o sentido do trabalho

O trabalho constitui elo de ligação entre indivíduo organização; ambos se buscam se escolhem para efetivação de uma realização prática, concreta. entre o indivíduo seu trabalho encontra-se figura do gerente. Grande parte do tempo pessoal dedicada vida profissional. Se tempo no trabalho aumenta, tempo que trabalho deve prover significado também aumenta. não se trata de uma relação meramente quantitativa. Sua renovação se faz necessária diariamente de forma qualitativa. fundamental que tempo no trabalho seja bem utilizado, tenha um propósito contribua para contínuo crescimento não para limitação do indivíduo ao longo do tempo. Se aumento da quantidade de produtos produzidos se constituía no principal desafio do início do século XX, hoje dirigentes passam ter como principal meta fazer com que os conhecimentos existentes na organização se tornem produtivos. tipo de produto que se almeja mais intelectual, de maior valor agregado, demanda maior envolvimento do empregado. Acreditamos que uma das formas para conseguir envolvimento seja através da capacidade do trabalho de prover significado. Gerentes não podem criar sentido para indivíduo, mas podem intervir na organização do trabalho quando necessário. estudo apresenta implicações gerenciais partir do grupo pesquisado: os sentidos os dessentidos do trabalho e as ações gerenciais para administração desta percepção. pesquisa de campo foi realizada através da utilização de questionário fechado efetuada com profissionais retirados de programas de pós-graduação com ênfase em Administração (MBAs). Após coleta dos dados no campo, os dados foram tabulados por meio de parâmetros estatísticos baseados na freqüência. Os indivíduos pesquisados anseiam por eficiência resultados e, partir da clareza das direções gerenciais, espera-se esclarecimento do objetivo de suas atividades. Percebe-se importância da qualidade da relação gerente-subordinado para sentido do trabalho. Há grande demanda pelas habilidades de comunicação do gerente (direções, utilidade do trabalho, feedback). desejo de segurança no trabalho inclui parte financeira mas não exclui emocional, que se manifesta pelo desejo do trabalho em equipe. preocupação da invasão do labor no mundo do trabalho, referenciando os conceitos propostos por Arendt, se manifesta pela rejeição rotinização das atividades e ausência de liberdade de criação. anseio pelo exercício da criatividade, em última instância, reflete necessidade primordial de um trabalho intrinsecamente satisfatório.

Rangel: ciclos longos e dualidade

For Ignácio Rangel economic development is an intrinsically contradictory movement through which technological innovation, whose dynamics explains the long cycle, is permanently in conflict with the existing capitals that it depreciates. Development in Brazil is not just defined by the opposition between the capitalist and the pre-capitalist sector; there is also an external duality that does not just express the relation between its stages of economic growth and the development of the world economy, but also tells us how its modern and its backward sector change at each stage. The duality has a double character: through the coexistence of relations of productions that correspond to two sequential historical phases, and through the existence, in the domestic and in the external “pole” of such duality, a relation of dependency toward the more advanced societies.

Decision rules and information provision : monitoring vs manipulation

We analyze the contractual design problem of a principal who delegates decision-making and information provision. The principal faces two tasks: he has to decide the level of discretion to be granted to the decision-maker and to establish who is in charge of supplying the information. We show that these two choices are intrinsically related. When the decision-maker is granted high discretion, information provision is optimally delegated to the parties directly affected by the decision. Conversely, when the decision-maker enjoys little discretion, it is more desirable to rely on a third impartial agent. The paper helps rationalize some organizational arrangements that are commonly observed in the context of judicial and antitrust decision-making.

Atuação do tribunal de contas do estado do Rio de Janeiro: fatores que possibilitam a avaliação de políticas públicas

Este trabalho pretende descrever como o Tribunal de Contas do Estado do Rio de Janeiro, na perspectiva de uma organização que representa o povo, controlando as finanças públicas, e prestando atenção às crescentes demandas da sociedade poderá enfrentar os novos desafios institucionais em conseqüência de novas atribuições, cada vez mais sujeita as incertezas decorrentes da natureza íntima da Avaliação das Políticas Públicas, em desenvolvimento, em face da auditoria tradicional, que o caracteriza em geral

Which strategies can an educational business, such as a kindergarten in Germany, develop to foster employee engagement?

Which strategies can an educational business, such as a Kindergarten in Germany, develop to foster employee engagement? The goal of this master thesis is to identify effective and viable measures to engage employees, that could be potentially implemented in a Kindergarten in Germany. The literature concerning the notion of employee engagement is so inconsistent that even studies about the subject fail to find one common definition and have to acknowledge the variety of existing definitions (IES, 2014, p.52-53). This reflects the youth of the concept, which has only been partially studied by academics and practitioners in recent years. The literature gap about employee engagement concerns many aspects, among which small companies and educational businesses, in particular those focusing on early child development. Considering the low levels of employee engagement in Germany combined with the absence of studies on educational organizations focusing in early child development this master thesis studies engagement in German Kindergärten(s). This master thesis is divided in two parts consisting of a literature review and a case study. The literature review allows to follow the evolution of the concept along the years, while the case study focuses on assessing employee engagement in Montessori Kindergärten(s) in Munich & elaborating potential measures to increase engagement levels. Double sided research was undertaken for this case study. On the one hand a quantitative research was performed, through a survey, in order to uncover which strategies would be viable to foster employee engagement. On the other hand a qualitative research was undertaken, consisting in an internship in a Kindergarten, in order to shed light on how to do so. Findings in the quantitative research indicate overall engagement levels average to low. Results related to specific statements bring out the originality of the educational sector, which is in some aspects intrinsically engaging, similarly to the medical field (Seijts & Crim, 2006). Furthermore low engagement levels led to a conversely high number of positives responses to potential engagement strategies suggesting their potential effectiveness. Findings in the qualitative research are coherent with qualitative results and complement them

Análise gráfica de estruturas porosas sobre a ótica da estereologia

In this work we developed a computer simulation program for physics porous structures based on programming language C + + using a Geforce 9600 GT with the PhysX chip, originally developed for video games. With this tool, the ability of physical interaction between simulated objects is enlarged, allowing to simulate a porous structure, for example, reservoir rocks and structures with high density. The initial procedure for developing the simulation is the construction of porous cubic structure consisting of spheres with a single size and with varying sizes. In addition, structures can also be simulated with various volume fractions. The results presented are divided into two parts: first, the ball shall be deemed as solid grains, ie the matrix phase represents the porosity, the second, the spheres are considered as pores. In this case the matrix phase represents the solid phase. The simulations in both cases are the same, but the simulated structures are intrinsically different. To validate the results presented by the program, simulations were performed by varying the amount of grain, the grain size distribution and void fraction in the structure. All results showed statistically reliable and consistent with those presented in the literature. The mean values and distributions of stereological parameters measured, such as intercept linear section of perimeter area, sectional area and mean free path are in agreement with the results obtained in the literature for the structures simulated. The results may help the understanding of real structures.

Simulação do escoamento monofásico em um estágio de uma bomba centrífuga utilizando técnicas de fluidodinâmica computacional

Oil production and exploration techniques have evolved in the last decades in order to increase fluid flows and optimize how the required equipment are used. The base functioning of Electric Submersible Pumping (ESP) lift method is the use of an electric downhole motor to move a centrifugal pump and transport the fluids to the surface. The Electric Submersible Pumping is an option that has been gaining ground among the methods of Artificial Lift due to the ability to handle a large flow of liquid in onshore and offshore environments. The performance of a well equipped with ESP systems is intrinsically related to the centrifugal pump operation. It is the pump that has the function to turn the motor power into Head. In this present work, a computer model to analyze the three-dimensional flow in a centrifugal pump used in Electric Submersible Pumping has been developed. Through the commercial program, ANSYS® CFX®, initially using water as fluid flow, the geometry and simulation parameters have been defined in order to obtain an approximation of what occurs inside the channels of the impeller and diffuser pump in terms of flow. Three different geometry conditions were initially tested to determine which is most suitable to solving the problem. After choosing the most appropriate geometry, three mesh conditions were analyzed and the obtained values were compared to the experimental characteristic curve of Head provided by the manufacturer. The results have approached the experimental curve, the simulation time and the model convergence were satisfactory if it is considered that the studied problem involves numerical analysis. After the tests with water, oil was used in the simulations. The results were compared to a methodology used in the petroleum industry to correct viscosity. In general, for models with water and oil, the results with single-phase fluids were coherent with the experimental curves and, through three-dimensional computer models, they are a preliminary evaluation for the analysis of the two-phase flow inside the channels of centrifugal pump used in ESP systems

Pirólise rápida catalítica do capim elefante utilizando materiais mesoporosos e óxidos metálicos para deoxigenação em bio-óleo

The fast pyrolysis of lignocellulosic biomass is a thermochemical conversion process for production energy which have been very atratactive due to energetic use of its products: gas (CO, CO2, H2, CH4, etc.), liquid (bio-oil) and charcoal. The bio-oil is the main product of fast pyrolysis, and its final composition and characteristics is intrinsically related to quality of biomass (ash disposal, moisture, content of cellulose, hemicellulose and lignin) and efficiency removal of oxygen compounds that cause undesirable features such as increased viscosity, instability, corrosiveness and low calorific value. The oxygenates are originated in the conventional process of biomass pyrolysis, where the use of solid catalysts allows minimization of these products by improving the bio-oil quality. The present study aims to evaluate the products of catalytic pyrolysis of elephant grass (Pennisetum purpureum Schum) using solid catalysts as tungsten oxides, supported or not in mesoporous materials like MCM-41, derived silica from rice husk ash, aimed to reduce oxygenates produced in pyrolysis. The biomasss treatment by washing with heated water (CEL) or washing with acid solution (CELix) and application of tungsten catalysts on vapors from the pyrolysis process was designed to improve the pyrolysis products quality. Conventional and catalytic pyrolysis of biomass was performed in a micro-pyrolyzer, Py-5200, coupled to GC/MS. The synthesized catalysts were characterized by X ray diffraction, infrared spectroscopy, X ray fluorescence, temperature programmed reduction and thermogravimetric analysis. Kinetic studies applying the Flynn and Wall model were performed in order to evaluate the apparent activation energy of holoceluloce thermal decomposition on samples elephant grass (CE, CEL and CELix). The results show the effectiveness of the treatment process, reducing the ash content, and were also observed decrease in the apparent activation energy of these samples. The catalytic pyrolysis process converted most of the oxygenate componds in aromatics such as benzene, toluene, ethylbenzene, etc

O princípio constitucional do desenvolvimento e a utilização de recursos hídricos na indústria de petróleo

As can be inferred by the title of its study The constitutional principle of sustainable development and the utilization of hidrical resources in the oil industry the transcribed pages are dedicated to the approach of the mentioned subjects which, despite being apparently different, will be shown intrinsically connected as goes by the study. The superation of this first step by the reader will lead to an important perception of the title: that the situation requires, urgently, a defined posture, a complete conduct change and, therefore, a modification of the paradigms currently establisheds. To brake barriers, modifying what is lived by, is the ultimate goal. For that, there is no unique path, linear, but there were broached the development themes, the hidrical resources theme and oil and natural gas industry at the necessary points to achieve, by the end, a comprehension for the Brazilian Federal Republic goals in the search for the application of these juridical norms. The ones whom lay down over this study shall notice that, more than a simple approach over these themes (which are still less worked and searched in Brazil), the heavy critic of an instituted and pacifically accepted reality, directly offensive of the constitutional principles. The debate evolves from punctual and specific aspects, it gains life, flies, searching how the juridical order equalizes the economic model to the environment defense. Standing by the possibility of conciliation among constitutional principles, the remodeling of an economic segment is defended, aligning it to the sustainable limits. Development, sustainable, becomes means and goals to the implementation of liberty, capacitating everyone to achieve their goals of life, their libertments, fruit of the inherent antagonism of the Constitution the sustainable development offers, while an axiological vector, a new reality to the economic order, turning it into a motriz element to the fortification of constitutional normative force and for the national development

Olhares sobre a formação do professor de matemática. Imagem da profissão e escrita de si

The main focus of this thesis is the formation of a mathematical teacher at a college institution. The general aim is to describe and to analyze the formation process of a mathematical teacher which is an undergraduate student in Mathematics at the Instituto de Educação Superior Presidente Kennedy IFESP, in Natal-RN. It is based on a qualitative ethnographic approach, and has its theoretical anchorage in the (auto)biographical narratives, the social representative theories, and the mathematical education. The number of participants in this investigation was 12 undergraduate students, which corresponds to 25% of the total number of students. The corpus utilized in our analysis included 48 (auto)biographical essays, 12 (auto)biographies (formation's memories), and 12 contextualization files, besides the research's diary. The sources were obtained from the whole program of studies, i.e. from November 2003 to December 2006. The analysis revealed that the reminiscences of the 12 students' academic trajectory influenced their professional formation, since their images of a mathematical teacher were intrinsically related to the one they had before. These representations were being either demolished or constructed in a network along the assertive image of their profession, changing afterwards the mathematical representation and the teaching way of this discipline. Our study also shows that the beginning of their teacher career was marked by mechanical practices influenced by their old teachers. The (trans)formation of themselves and their teaching practices happened in a smooth way as soon as they increased their knowledgements in Mathematics, and it reflected upon the way they learned mathematics. The writing of their (auto)biographies helped the set up of new knowledgements, leaving to a self-consciousness as well as a self-formation, and contributed for the construction of a new way to see and to live the profession. Therefore, a mathematical teacher, for the undergraduate students of the IFESP involved in this work, is made at the interface of the familiar, academic, and professional context, besides the reflexive writings about the formation path, the way of life and the relationships among them

The locus coeruleus and central chemosensitivity

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Análise e síntese de antenas e superfícies seletivas de frequência utilizando computação evolucionária e inteligência de enxames

The frequency selective surfaces, or FSS (Frequency Selective Surfaces), are structures consisting of periodic arrays of conductive elements, called patches, which are usually very thin and they are printed on dielectric layers, or by openings perforated on very thin metallic surfaces, for applications in bands of microwave and millimeter waves. These structures are often used in aircraft, missiles, satellites, radomes, antennae reflector, high gain antennas and microwave ovens, for example. The use of these structures has as main objective filter frequency bands that can be broadcast or rejection, depending on the specificity of the required application. In turn, the modern communication systems such as GSM (Global System for Mobile Communications), RFID (Radio Frequency Identification), Bluetooth, Wi-Fi and WiMAX, whose services are highly demanded by society, have required the development of antennas having, as its main features, and low cost profile, and reduced dimensions and weight. In this context, the microstrip antenna is presented as an excellent choice for communications systems today, because (in addition to meeting the requirements mentioned intrinsically) planar structures are easy to manufacture and integration with other components in microwave circuits. Consequently, the analysis and synthesis of these devices mainly, due to the high possibility of shapes, size and frequency of its elements has been carried out by full-wave models, such as the finite element method, the method of moments and finite difference time domain. However, these methods require an accurate despite great computational effort. In this context, computational intelligence (CI) has been used successfully in the design and optimization of microwave planar structures, as an auxiliary tool and very appropriate, given the complexity of the geometry of the antennas and the FSS considered. The computational intelligence is inspired by natural phenomena such as learning, perception and decision, using techniques such as artificial neural networks, fuzzy logic, fractal geometry and evolutionary computation. This work makes a study of application of computational intelligence using meta-heuristics such as genetic algorithms and swarm intelligence optimization of antennas and frequency selective surfaces. Genetic algorithms are computational search methods based on the theory of natural selection proposed by Darwin and genetics used to solve complex problems, eg, problems where the search space grows with the size of the problem. The particle swarm optimization characteristics including the use of intelligence collectively being applied to optimization problems in many areas of research. The main objective of this work is the use of computational intelligence, the analysis and synthesis of antennas and FSS. We considered the structures of a microstrip planar monopole, ring type, and a cross-dipole FSS. We developed algorithms and optimization results obtained for optimized geometries of antennas and FSS considered. To validate results were designed, constructed and measured several prototypes. The measured results showed excellent agreement with the simulated. Moreover, the results obtained in this study were compared to those simulated using a commercial software has been also observed an excellent agreement. Specifically, the efficiency of techniques used were CI evidenced by simulated and measured, aiming at optimizing the bandwidth of an antenna for wideband operation or UWB (Ultra Wideband), using a genetic algorithm and optimizing the bandwidth, by specifying the length of the air gap between two frequency selective surfaces, using an optimization algorithm particle swarm

Aplicação de técnicas de aprendizado de máquina no reconhecimento de classes estruturais de proteínas

Nowadays, classifying proteins in structural classes, which concerns the inference of patterns in their 3D conformation, is one of the most important open problems in Molecular Biology. The main reason for this is that the function of a protein is intrinsically related to its spatial conformation. However, such conformations are very difficult to be obtained experimentally in laboratory. Thus, this problem has drawn the attention of many researchers in Bioinformatics. Considering the great difference between the number of protein sequences already known and the number of three-dimensional structures determined experimentally, the demand of automated techniques for structural classification of proteins is very high. In this context, computational tools, especially Machine Learning (ML) techniques, have become essential to deal with this problem. In this work, ML techniques are used in the recognition of protein structural classes: Decision Trees, k-Nearest Neighbor, Naive Bayes, Support Vector Machine and Neural Networks. These methods have been chosen because they represent different paradigms of learning and have been widely used in the Bioinfornmatics literature. Aiming to obtain an improvment in the performance of these techniques (individual classifiers), homogeneous (Bagging and Boosting) and heterogeneous (Voting, Stacking and StackingC) multiclassification systems are used. Moreover, since the protein database used in this work presents the problem of imbalanced classes, artificial techniques for class balance (Undersampling Random, Tomek Links, CNN, NCL and OSS) are used to minimize such a problem. In order to evaluate the ML methods, a cross-validation procedure is applied, where the accuracy of the classifiers is measured using the mean of classification error rate, on independent test sets. These means are compared, two by two, by the hypothesis test aiming to evaluate if there is, statistically, a significant difference between them. With respect to the results obtained with the individual classifiers, Support Vector Machine presented the best accuracy. In terms of the multi-classification systems (homogeneous and heterogeneous), they showed, in general, a superior or similar performance when compared to the one achieved by the individual classifiers used - especially Boosting with Decision Tree and the StackingC with Linear Regression as meta classifier. The Voting method, despite of its simplicity, has shown to be adequate for solving the problem presented in this work. The techniques for class balance, on the other hand, have not produced a significant improvement in the global classification error. Nevertheless, the use of such techniques did improve the classification error for the minority class. In this context, the NCL technique has shown to be more appropriated

Efeito de adições poliméricas na aderência de pastas de cimento a tubos metálicos após ciclagem térmica

Thermal recovery methods, especially steam injection, have been used to produce heavy oils. However, these methods imply that the metallic casing-cement sheath interface is submitted to thermal cycling. As a consequence, cracking may develop due to the thermal expansion mismatch of such materials, which allows the flow of oil and gas through the cement sheath, with environmental and economical consequences. It is therefore important to anticipate interfacial discontinuities that may arise upon Thermal recovery. The present study reports a simple alternative method to measure the shear strength of casing-sheath interfaces using pushthrough geometry, applied to polymer-containing hardened cement slurries. Polyurethane and recycled tire rubber were added to Portland-bases slurries to improve the fracture energy of intrinsically brittle cement. Samples consisting of metallic casing sections surrounded by hardened polymer-cement composites were prepared and mechanically tested. The effect of thermal cycles was investigated to simulate temperature conditions encountered in steam injection recovery. The results showed that the addition of polyurethane significantly improved the shear strength of the casing-sheath interface. The strength values obtained adding 10% BWOC of polyurethane to a Portland-base slurry more than doubled with respect to that of polyurethane-free slurries. Therefore, the use of polyurethane significantly contributes to reduce the damage caused by thermal cycling to cement sheath, improving the safety conditions of oil wells and the recovery of heavy oils