Development of LRFD Procedures for Bridge Pile Foundations in Iowa, Volume I: An Electronic Database for PIle LOad Tests (PILOT), TR-573, 2011

For well over 100 years, the Working Stress Design (WSD) approach has been the traditional basis for geotechnical design with regard to settlements or failure conditions. However, considerable effort has been put forth over the past couple of decades in relation to the adoption of the Load and Resistance Factor Design (LRFD) approach into geotechnical design. With the goal of producing engineered designs with consistent levels of reliability, the Federal Highway Administration (FHWA) issued a policy memorandum on June 28, 2000, requiring all new bridges initiated after October 1, 2007, to be designed according to the LRFD approach. Likewise, regionally calibrated LRFD resistance factors were permitted by the American Association of State Highway and Transportation Officials (AASHTO) to improve the economy of bridge foundation elements. Thus, projects TR-573, TR-583 and TR-584 were undertaken by a research team at Iowa State University’s Bridge Engineering Center with the goal of developing resistance factors for pile design using available pile static load test data. To accomplish this goal, the available data were first analyzed for reliability and then placed in a newly designed relational database management system termed PIle LOad Tests (PILOT), to which this first volume of the final report for project TR-573 is dedicated. PILOT is an amalgamated, electronic source of information consisting of both static and dynamic data for pile load tests conducted in the State of Iowa. The database, which includes historical data on pile load tests dating back to 1966, is intended for use in the establishment of LRFD resistance factors for design and construction control of driven pile foundations in Iowa. Although a considerable amount of geotechnical and pile load test data is available in literature as well as in various State Department of Transportation files, PILOT is one of the first regional databases to be exclusively used in the development of LRFD resistance factors for the design and construction control of driven pile foundations. Currently providing an electronically organized assimilation of geotechnical and pile load test data for 274 piles of various types (e.g., steel H-shaped, timber, pipe, Monotube, and concrete), PILOT (http://srg.cce.iastate.edu/lrfd/) is on par with such familiar national databases used in the calibration of LRFD resistance factors for pile foundations as the FHWA’s Deep Foundation Load Test Database. By narrowing geographical boundaries while maintaining a high number of pile load tests, PILOT exemplifies a model for effective regional LRFD calibration procedures.

An epidemiological study of dental agenesis in a primary health area in Spain: estimated prevalence and associated factors

Objectives: To evaluate the prevalence of dental agenesis and its possible association with other developmental dental anomalies and systemic entities. Setting and Sample Population: Descriptive transversal study, for which 1518 clinical records, of patients visited by the Odontological Service of the Primary Health Centre of Cassà de la Selva (Girona-Spain) between December 2002 and February 2006 were reviewed. The data were recorded in relation to the oral and dental anomalies and the associated systemic entities, between the ones referred as concomitant in literature. Results: Values of 9.48% (7.25% excluding the third molars) for dental agenesis and 0.39% for oligodontia were obtained. The presence of dental agenesis concomitant with some other forms of oral and dental anomalies was observed. Attention must be drawn to the fact that a greater number of concomitant systemic entities were observed in those patients that presented a severe phenotypical pattern of dental agenesis. Conclusions: The results of the present study do not differ from the ones reported in studies of similar characteristics among Occidental and Spanish populations. The relationship observed between certain systemic entities and developmental dental anomalies suggest a possible common genetic etiology

Mechanisms underlying functional recovery after in vivo focal cerebral ischemia : from preconditioning to diffusion MRI

Version abregée L'ischémie cérébrale est la troisième cause de mort dans les pays développés, et la maladie responsable des plus sérieux handicaps neurologiques. La compréhension des bases moléculaires et anatomiques de la récupération fonctionnelle après l'ischémie cérébrale est donc extrêmement importante et représente un domaine d'intérêt crucial pour la recherche fondamentale et clinique. Durant les deux dernières décennies, les chercheurs ont tenté de combattre les effets nocifs de l'ischémie cérébrale à l'aide de substances exogènes qui, bien que testées avec succès dans le domaine expérimental, ont montré un effet contradictoire dans l'application clinique. Une approche différente mais complémentaire est de stimuler des mécanismes intrinsèques de neuroprotection en utilisant le «modèle de préconditionnement» : une brève insulte protège contre des épisodes d'ischémie plus sévères à travers la stimulation de voies de signalisation endogènes qui augmentent la résistance à l'ischémie. Cette approche peut offrir des éléments importants pour clarifier les mécanismes endogènes de neuroprotection et fournir de nouvelles stratégies pour rendre les neurones et la glie plus résistants à l'attaque ischémique cérébrale. Dans un premier temps, nous avons donc étudié les mécanismes de neuroprotection intrinsèques stimulés par la thrombine, un neuroprotecteur «préconditionnant» dont on a montré, à l'aide de modèles expérimentaux in vitro et in vivo, qu'il réduit la mort neuronale. En appliquant une technique de microchirurgie pour induire une ischémie cérébrale transitoire chez la souris, nous avons montré que la thrombine peut stimuler les voies de signalisation intracellulaire médiées par MAPK et JNK par une approche moléculaire et l'analyse in vivo d'un inhibiteur spécifique de JNK (L JNK) .Nous avons également étudié l'impact de la thrombine sur la récupération fonctionnelle après une attaque et avons pu démontrer que ces mécanismes moléculaires peuvent améliorer la récupération motrice. La deuxième partie de cette étude des mécanismes de récupération après ischémie cérébrale est basée sur l'investigation des bases anatomiques de la plasticité des connections cérébrales, soit dans le modèle animal d'ischémie transitoire, soit chez l'homme. Selon des résultats précédemment publiés par divers groupes ,nous savons que des mécanismes de plasticité aboutissant à des degrés divers de récupération fonctionnelle sont mis enjeu après une lésion ischémique. Le résultat de cette réorganisation est une nouvelle architecture fonctionnelle et structurelle, qui varie individuellement selon l'anatomie de la lésion, l'âge du sujet et la chronicité de la lésion. Le succès de toute intervention thérapeutique dépendra donc de son interaction avec la nouvelle architecture anatomique. Pour cette raison, nous avons appliqué deux techniques de diffusion en résonance magnétique qui permettent de détecter les changements de microstructure cérébrale et de connexions anatomiques suite à une attaque : IRM par tenseur de diffusion (DT-IR1V) et IRM par spectre de diffusion (DSIRM). Grâce à la DT-IRM hautement sophistiquée, nous avons pu effectuer une étude de follow-up à long terme chez des souris ayant subi une ischémie cérébrale transitoire, qui a mis en évidence que les changements microstructurels dans l'infarctus ainsi que la modification des voies anatomiques sont corrélés à la récupération fonctionnelle. De plus, nous avons observé une réorganisation axonale dans des aires où l'on détecte une augmentation d'expression d'une protéine de plasticité exprimée dans le cône de croissance des axones (GAP-43). En appliquant la même technique, nous avons également effectué deux études, rétrospective et prospective, qui ont montré comment des paramètres obtenus avec DT-IRM peuvent monitorer la rapidité de récupération et mettre en évidence un changement structurel dans les voies impliquées dans les manifestations cliniques. Dans la dernière partie de ce travail, nous avons décrit la manière dont la DS-IRM peut être appliquée dans le domaine expérimental et clinique pour étudier la plasticité cérébrale après ischémie. Abstract Ischemic stroke is the third leading cause of death in developed countries and the disease responsible for the most serious long-term neurological disability. Understanding molecular and anatomical basis of stroke recovery is, therefore, extremely important and represents a major field of interest for basic and clinical research. Over the past 2 decades, much attention has focused on counteracting noxious effect of the ischemic insult with exogenous substances (oxygen radical scavengers, AMPA and NMDA receptor antagonists, MMP inhibitors etc) which were successfully tested in the experimental field -but which turned out to have controversial effects in clinical trials. A different but complementary approach to address ischemia pathophysiology and treatment options is to stimulate and investigate intrinsic mechanisms of neuroprotection using the "preconditioning effect": applying a brief insult protects against subsequent prolonged and detrimental ischemic episodes, by up-regulating powerful endogenous pathways that increase resistance to injury. We believe that this approach might offer an important insight into the molecular mechanisms responsible for endogenous neuroprotection. In addition, results from preconditioning model experiment may provide new strategies for making brain cells "naturally" more resistant to ischemic injury and accelerate their rate of functional recovery. In the first part of this work, we investigated down-stream mechanisms of neuroprotection induced by thrombin, a well known neuroprotectant which has been demonstrated to reduce stroke-induced cell death in vitro and in vivo experimental models. Using microsurgery to induce transient brain ischemia in mice, we showed that thrombin can stimulate both MAPK and JNK intracellular pathways through a molecular biology approach and an in vivo analysis of a specific kinase inhibitor (L JNK1). We also studied thrombin's impact on functional recovery demonstrating that these molecular mechanisms could enhance post-stroke motor outcome. The second part of this study is based on investigating the anatomical basis underlying connectivity remodeling, leading to functional improvement after stroke. To do this, we used both a mouse model of experimental ischemia and human subjects with stroke. It is known from previous data published in literature, that the brain adapts to damage in a way that attempts to preserve motor function. The result of this reorganization is a new functional and structural architecture, which will vary from patient to patient depending on the anatomy of the damage, the biological age of the patient and the chronicity of the lesion. The success of any given therapeutic intervention will depend on how well it interacts with this new architecture. For this reason, we applied diffusion magnetic resonance techniques able to detect micro-structural and connectivity changes following an ischemic lesion: diffusion tensor MRI (DT-MRI) and diffusion spectrum MRI (DS-MRI). Using DT-MRI, we performed along-term follow up study of stroke mice which showed how diffusion changes in the stroke region and fiber tract remodeling is correlating with stroke recovery. In addition, axonal reorganization is shown in areas of increased plasticity related protein expression (GAP 43, growth axonal cone related protein). Applying the same technique, we then performed a retrospective and a prospective study in humans demonstrating how specific DTI parameters could help to monitor the speed of recovery and show longitudinal changes in damaged tracts involved in clinical symptoms. Finally, in the last part of this study we showed how DS-MRI could be applied both to experimental and human stroke and which perspectives it can open to further investigate post stroke plasticity.

Incidence of Garlic common latent virus in Argentina, and phylogenetic and recombination analyses of isolates

The objective of this work was to estimate the incidence and prevalence of Garlic common latent virus (GarCLV) in the main production regions of garlic (Allium sativum) in Argentina, and to perform phylogenetic and recombination analyses in isolates from these regions. Leaf samples (3,050) were taken from four garlic commercial types, in 13 departments of the four main garlic-producing provinces of Argentina, in a 1,175-ha sampling area. Virus infection was evaluated with DAS-Elisa test using specific antiserum, and the phylogenetic and recombination analyses were done with capsid protein (CP) nucleotide sequence of seven GarCLV isolates from the provinces. The incidence of GarCLV in the evaluated provinces varied between 6.7 and 22% of the samples, whereas the prevalence varied between 52.6 and 70%. In the analysis of garlic commercial types, Morado showed the highest incidence of the virus, in the province of San Juan, whereas Rosado Paraguayo had the lowest incidence, in the province of Cordoba. Nucleotide identity in the CP sequences ranged between 80.3 and 97.6%. The phylogenetic analysis shows the presence of two main groups of GarCLV and of a possible third group that would include only a German isolate. The recombination analysis between isolates from different parts of the world evidences the presence of recombinant isolates from Poland and Australia.

Requirements Management in the Software Development Process

Ohjelmistokehitys on monimutkainen prosessi. Yksi keskeisistä tekijöistä siinä on ohjelmistolle asetettavat vaatimukset. Näitä vaatimuksia on hyvin monenlaisia, ja eri tasoisia; toivotusta toiminnallisuudesta hyvinkin yksityiskohtaisiin vaatimuksiin. Näiden vaatimusten hallinta on myöskin hyvin monitahoista, vaikkakin se on kirjallisuudessa esitetty selkeänä prosessissa, joka on sarja toisistaan erottuviavaiheita. Työn painopiste oli näiden vaatimusten muutoksen ja valmiiseen ohjelmistoon kohdistuvan palautteen hallinnassa, ja kuinka vaatimustenhallintaohjelmisto voisi olla avuksi näissä prosesseissa. Vaatimustenhallintatyökalun käyttö ei sinällään ratkaise mitään ongelmia, mutta se suo puitteet parantaa vaatimusten hallitsemista. Työkalun käytöstä on muun muassa seuraavia etuja: vaatimusten keskitetty varastointi, käyttäjäoikeuksien määrittely koskien eri käyttäjiä ja heidän pääsyään näkemään tai muuttamaan tietoa, muutoksenhallintaprosessin hallinta, muutosten vaikutuksen analysointi ja jäljitettävyys ja pääsy tietoihin web-selaimella.

Process Interfaces in an After Sales Organization

Työn tavoitteena oli selvittää Larox Oy:n, Lappeenranta, palveluorganisaation prosessit ja prosessien väliset rajapinnat. Prosesseja ja prosessien kehittämistä ja innovointia tarkasteltiin ensin kirjallisuuden perusteella. Rajapintojen selkeää esittämistä varten kehitettiin yksinkertainen metodologia mind mapping -tekniikan pohjalta. Nykyisten prosessien tila ja rajapinnat analysoitiin ja dokumentoitiin haastattelemalla Larox Oy:n työntekijöitä ja asiakkaita sekä tutustumalla prosessikuvauksiin ja muihin olennaisiin dokumentteihin. Analyysin tulosten perusteella tunnistettiin suurimmat ongelmakohdat rajapinnoissa ja pohdittiin mahdollisia ratkaisuja niihin. Pieniä prosessinkehitysaloitteita kehitettiin yhteistyössä Larox Oy:n työntekijöiden kanssa. Työn lopussa on pohdittu mahdollisia tulevaisuuden malleja Larox Oy:n palveluorganisaation toimintamalleiksi.

El escepticismo identitario en la obra de Jorge Luis Borges

Este trabajo estudia la actitud de Borges respecto de la identidad, en general, y la identidad nacional, en particular. En la primera parte realizo una breve exposición de la tradición escéptica, de la que Borges es deudor, centrándome especialmente en el tratamiento que ésta le da al tema de la identidad. En la segunda parte, estudio de qué modo el escepticismo identitario se concreta en la obra de Jorge Luis Borges ; ABSTRACT: This paper explores the attitude of Borges with regard to identity, specifically the national identity. In the first part I study the skeptic tradition, that is predominant in Borges works, specially in connexion with the subject of identity. In the second part, I study how identitary skepticism appears in borgean litterature. KEYWORDS: Jorge Luis Borges. Skepticism. Identity. Nationalism. Latin american literature. Michel de Montaigne.

The conditions for the reproduction of the SAGUAPAC water cooperative in the city of Santa Cruz de la Sierra, Bolivia : discourse analysis

The SAGUAPAC cooperative in the city of Santa Cruz de la Sierra (Eastern Bolivia) is regularly presented as an example of cooperative successes regarding water supply and sanitation. Its efficiency, both economic and technical, is widely considered as the main reason for its attractiveness. However, without denying its importance, we show, through a discourse analysis from and about SAGUAPAC in local media, that moral and non-instrumental factors are crucial in the reproduction of the cooperative. These factors create attachment and affection toward the cooperative, through a storytelling using a four-dimensional rhetoric (mythification, identification, emotionalisation and personification). This storytelling technique, internalized in the local media discourse and materializing the so-called new spirit of capitalism, exploits the affects and instrumentalisation of local myths and legends, as well as the 'camba' ethnic identity. In that, it tends to retain SAGUAPAC members and to canvass new ones, by providing them with recognition in their quality of local community members. However, the mobilisation of social norms and power hierarchies might end up reinforcing the social exclusion of Andean non-camba immigrants, inspite of an a priori inclusive and democratic organisation.

The Key Features of Knowledge and Knowledge Management in Product Development Process

Tutkimusongelmana oli kuinka tiedon johtamisella voidaan edesauttaa tuotekehitysprosessia. Mitkä ovat ne avaintekijät tietoympäristössä kuin myös itse tiedossa, joilla on merkitystä erityisesti tuotekehitysprosessin arvon muodostumiseen ja prosessien kehittämiseen? Tutkimus on laadullinen Case-tutkimus. Tutkimusongelmat on ensin selvitetty kirjallisuuden avulla, jonka jälkeen teoreettinen viitekehys on rakennettu tutkimaan rajattua ongelma-aluetta case-yrityksestä. Empiirisen tutkimuksen materiaali koostuu pääasiallisesti henkilökohtaisten teemahaastattelujen aineistosta. Tulokset merkittävimmistä tiedon hyväksikäytön haittatekijöistä, kuten myös parannusehdotukset on lajiteltu teoreettisessa viitekehyksessä esitettyjen oletustekijöiden mukaan. Haastatteluissa saadut vastaukset tukevat kirjallisuudesta ja alan ammattilaiselta saatua käsitystä tärkeimmistä vaikuttavista tekijöistä. Tärkeimmät toimenpiteet ja aloitteet joilla parannettaisiin tiedon muodostumista, koskivat ennnen kaikkea työnteon ulkoisia olosuhteita, eikä niinkään tiedon muodostumisen prosessia itseään. Merkittävimpiä haittatekijöitä olivat kultturiin, fyysiseen ja henkiseen tilaan ja henkilöstöresursseihin liittyvät ongelmat. Ratkaisuja ongelmiin odotettiin saatavan lähinnä tietotekniikan, henkilöstöresurssien ja itse tiedon muokkaamisen avulla. Tuotekehitysprosessin ydin tietovirtojen ja –pääomien luokittelu ja tulkitseminen tiedon muodostusta kuvaavan Learning Spiralin avulla antoi lähinnä teoreettisia viitteitä siitä millaisia keinoja on olemassa tiedon lisäämiseen ja jakamiseen eri tietotyypeittäin. Tulosten perusteella caseyrityksessä pitäisi kiinnittää erityistä huomiota tiedon dokumentointiin ja jakamiseen erityisesti sen tiedon osalta, joka on organisaatiossa vain harvalla ja/tai luonteeltaan hyvin tacitia.

KUMPPANUUKSIEN LAATUTEKIJÄT JA KUMPPANUUSKYVYKKYYS VERKOSTOSUHTEIDEN KRIITTISINÄ MENESTYSTEKIJÖINÄ

Pro gradu -tutkielman tavoitteena on selvittää, mitkä ovat kahden yrityksen läheisen verkostoyhteistyösuhteen menestystekijät ja kuinka yritys pystyy parantamaan onnistumistaan verkostosuhteissaan. Päämääränä on selvittää kirjallisuudesta löydettyjen menestystekijöiden avulla, mikä on case –yritysten yhteistyösuhteiden ja kumppanuuskyvykkyyden nykytila, pullonkaulatekijät ja kuinka niitä voidaan parantaa. Tutkielman tavoitteisiin on pyritty kvalitatiivisiin tutkimusmenetelmiin kuuluvalla case –tutkimuksella. Aineisto kerättiin teemahaastatteluin ja analysoitiin purkamalla ne sanallisiin, teema-alueiden mukaisiin kokonaisuuksiin. Analyysissä käytettiin osittain Atlas.Ti –ohjelmistoa. Tutkimuksen tulokset osoittavat, että läheisen verkostoyhteistyösuhteen menestystekijät ovat luottamus, sitoutuminen ja kommunikaatio sekä verkostoidentiteetti. Näistä luottamuksen tila oli tutkituissa suhteissa hyvä ja sitoutumisenkin kohtuullinen. Sen sijaan verkostoidentiteetti oli jossain määrin epäselvä ja kommunikaatiossa oli puutteita kasvaen sitä mukaan, kun organisaatiohierarkiassa edetään korkeammalle. Nämä mahdollisesti heikentävät läheisestä suhteesta saatavia hyötyjä. Tulokset osoittavat myös sen, että nostaakseen onnistumisen tason kaikissa yhteistyösuhteissaan, niiden tulee pyrkiä järjestelmällisesti hyödyntämään aikaisempaa yhteistyökokemustaan ja näin rakentamaan kumppanuuskyvykkyyttään. Kohdeyrityksissä oli tehty vielä vähän konkreettisia toimenpiteitä yritystason kumppanuuskyvykkyyden kohentamiseksi.

National and Gender Measurement Invariance of the Utrecht-Management of Identity Commitments Scale (U-MICS) : A 10-Nation Study With University Students

The purpose of this study was to examine the psychometric properties of the Utrecht-Management of Identity Commitments Scale (U-MICS), a self-report measure aimed at assessing identity processes of commitment, in-depth exploration, and reconsideration of commitment. We tested its factor structure in university students from a large array of cultural contexts, including 10 nations located in Europe (i.e., Italy, the Netherlands, Poland, Portugal, Romania, and Switzerland), Middle East (i.e., Turkey), and Asia (i.e., China, Japan, and Taiwan). Furthermore, we tested national and gender measurement invariance. Participants were 6,118 (63.2% females) university students aged from 18 to 25 years (Mage = 20.91 years). Results indicated that the three-factor structure of the U-MICS fitted well in the total sample, in each national group, and in gender groups. Furthermore, national and gender measurement invariance were established. Thus, the U-MICS can be fruitfully applied to study identity in university students from various Western and non-Western contexts.

Carola Milà i la felicitat de ser una dona : La teoria feminista de Maria Aurèlia Capmany en 'Feliçment, jo sóc una dona'

Aquest treball presenta una anàlisi textual de l'obra de Maria Aurèlia Capmany 'Feliçment, jo sóc una dona'. D'una banda, a través d'una breu presentació de l'autora fins al moment de la publicació de l'obra i, d'una altra, d'una síntesi del feminisme a Catalunya, l'autora del treball ens apropa a les teories feministes que Capmany aboca en la seva novel·la, fet que representa un punt d'inflació en la seva trajectòria novel·lística. L'anàlisi textual ens permet apropar-nos al concepte d'identitat femenina i a la seva construcció, així com relacionar-lo amb les teories feministes més recents.

Customer-Related Internal Communication in a Global Matrix Organization

The objective of the thesis was to explore the nature and characteristics of customer-related internal communication in a global industrial matrix organization during a specific customer relationship, and how it could be improved. The theoretical part of the study views the field of the concepts of intra-organizational information and knowledge sharing. The theoretical part also views the internal communications influences to customer relationships, its problematic, and the suggestions to improve internal communication in literature. The empirical part of the study was conducted with the Content Analysis and the Social Network Analysis as research methods. The data was collected by interviews and a questionnaire. Internal communication was observed first generally within the organization from the point of view of a certain business, and secondly, during a specific customer relationship at personal level and at departmental level. The results of the study describe the nature and characteristics of internal communication in the organization. The results give 13 suggestions for improving internal communication in the organization. Although the study has been done in one specific organization, it also offers insights for other organizations as well as managers to improve their internal communication.

Coolant Flow and Heat Transfer in Pebble-Bed Reactor Core

This thesis gathers knowledge about ongoing high-temperature reactor projects around the world. Methods for calculating coolant flow and heat transfer inside a pebble-bed reactor core are also developed. The thesis begins with the introduction of high-temperature reactors including the current state of the technology. Process heat applications that could use the heat from a high-temperature reactor are also introduced. A suitable reactor design with data available in literature is selected for the calculation part of the thesis. Commercial computational fluid dynamics software Fluent is used for the calculations. The pebble-bed is approximated as a packed-bed, which causes sink terms to the momentum equations of the gas flowing through it. A position dependent value is used for the packing fraction. Two different models are used to calculate heat transfer. First a local thermal equilibrium is assumed between the gas and solid phases and a single energy equation is used. In the second approach, separate energy equations are used for the phases. Information about steady state flow behavior, pressure loss, and temperature distribution in the core is obtained as results of the calculations. The effect of inlet mass flow rate to pressure loss is also investigated. Data found in literature and the results correspond each other quite well, considered the amount of simplifications in the calculations. The models developed in this thesis can be used to solve coolant flow and heat transfer in a pebble-bed reactor, although additional development and model validation is needed for better accuracy and reliability.