882 resultados para Geographic Information Systems (GIS)
Resumo:
Report on a special investigation of the University of Iowa Hospitals and Clinics, Health Care Information Systems Department, for the period January 1, 2005 through July 5, 2013
Resumo:
This project was proposed as Phase I of a 2-phase program to evaluate the present use of weather information by Iowa Department of Transportation (IaDOT) personnel, recommend revised procedures, and then implement the resulting recommendations. Midway through Phase I (evaluation phase) the FORETELL project was funded. This project is a multi-state venture that engages the National Weather Service (NWS) and the Forecast Systems Laboratory of the National Oceanic and Atmospheric Administration and proposes to supplant the current weather information-generation and distribution system with an advanced system based on state-of-the-art technologies. The focus of the present project was therefore refined to consider use of weather data by IaDOT personnel, and the training programs needed to more effectively use these data. Results of the survey revealed that two major areas - training of personnel on use of data from whatever source and more precise information of frost formation - are not addressed in the FORETELL project. These aspects have been the focus of the present project.
Resumo:
Report on a special investigation of the Cerro Gordo County Management Information Systems (MIS) Department for the period January 1, 2008 through July 31, 2013
Resumo:
El present Treball Final de Carrera (TFC), basat en el tema dels Sistemes d'informació Geogràfica i Geotelemàtica, es centra en les diverses aplicacions geoespacials per al sistema operatiu Android.
Resumo:
The purposes of this study were to determine the distribution and climatic patterns of current and future physic nut (Jatropha curcas) cultivation regions in Mexico, and to identify possible locations for in vivo germplasm banks establishment, using geographic information systems. Current climatic data were processed by Floramap software to obtain distribution maps and climatic patterns of regions where wild physic nuts could be found. DIVA-GIS software analyzed current climatic data (Worldclim model) and climatic data generated by CCM3 model to identify current and future physic nut cultivation regions, respectively. The distribution map showed that physic nut was present in most of the tropical and subtropical areas of Mexico, which corresponded to three agroclimatic regions. Climate types were Aw2, Aw1, and Bs1, for regions 1, 2 and 3, respectively. Nontoxic genotypes were associated with region 2, and toxic genotypes were associated with regions 1 and 3. According to the current and future cultivation regions identified, the best suitable ones to establish in vivo germplasm collections were the coast of Michoacán and the Isthmus of Tehuantepec, located among the states of Veracruz, Oaxaca and Chiapas.
Resumo:
The aim of this research paper is to present a macroscopic study about the feasibility and the efficiency of mobile devices in computing least-cost path (LCP). This kind of artifact must work in off-line mode and must allow to load data from a mountain zone like digital terrain models and meteorological data.
Resumo:
Terveydenhuollossa käytetään nykyisin informaatioteknologian (IT) mahdollisuuksia parantamaan hoidon laatua, vähentämään hoitoon liittyviä kuluja sekä yksinkertaistamaan ja selkeyttämään laakareiden työnkulkua. Tietojärjestelmät, jotka edustavat jokaisen IT-ratkaisun ydintä, täytyy kehittää täyttämään lukuisia vaatimuksia, ja yksi niistä on kyky integroitua saumattomasti toisten tietojärjestelmien kanssa. Järjestelmäintegraatio on kuitenkin yhä haastava tehtävä, vaikka sita varten on kehitetty useita standardeja. Tässä työssä kuvataan vastakehitetyn lääketieteellisen tietojärjestelmän liittymäratkaisu. Työssä pohditaan vaatimuksia, jotka tällaiselle sovellukselle asetetaan, ja myös tapa, jolla vaatimukset toteutuvat on esitetty. Liittymaratkaisu on jaettu kahteen osaan, tietojärjestelmaliittymään ja "liittymakoneeseen" (interfacing engine). Edellinen on käsittää perustoiminnallisuuden, jota tarvitaan vastaanottamaan ja lähettämään tietoa toisiin järjestelmiin, kun taas jälkimmäinen tarjoaa tuen tuotantoympäristössa käytettäville standardeille. Molempien osien suunnitelu on esitelty perusteellisesti tässä työssä. Ongelma ratkaistiin modulaarisen ja geneerisen suunnittelun avulla. Tämä lähestymistapa osoitetaan työssä kestäväksi ja joustavaksi ratkaisuksi, jota voidaan käyttää tarkastelemaan laajaa valikoimaa liittymäratkaisulle asetettuja vaatimuksia. Lisaksi osoitetaan kuinka tehty ratkaisu voidaan joustavuutensa ansiosta helposti mukauttaa vaatimuksiin, joita ei ole etukäteen tunnistettu, ja siten saavutetaan perusta myös tulevaisuuden tarpeille
Resumo:
Tämän tutkielman tavoitteena on perehtyä globaalin yrityksen laskentatoimen tietojärjestelmien yhtenäistämiseen ja käyttöönottoon esimerkkinä UPM-Kymmene konsernin projekti. Tutkielmassa sovelletaan hermeneuttista tutkimusotetta. Teoreettisesti aihetta tarkastellaan globalisoitumisen ja laskentatoimen tietojärjestelmille asetettavien vaatimusten pohjalta, sekä järjestelmän muutosprosessin eri vaiheissa huomioon otettavien muuttujien perusteella. Yhtenäisen laskentatoimen tietojärjestelmän tuomat edut globaalille yritykselle ovat ilmeisiä. Ennen yhtenäisen projektin kehittelyä on olennaista tutkia lähtökohdat projektin onnistumiselle ja suunnitella projektin eri vaiheet huolella. Tutkielmassa havaitaan myös, että globaalissa yrityksessä tulee huomioida eri yrityskulttuurit sekä tulosyksiköiden erilaiset toimintatavat. Johtopäätöksenä todetaan, että sekä yritysjohdon että tulosyksiköiden sitoutuneisuus projektiin ja yhtenäiset tavoitteet ovat oleellisia projektin onnistumisen kannalta.
Resumo:
Que ce soit d'un point de vue, urbanistique, social, ou encore de la gouvernance, l'évolution des villes est un défi majeur de nos sociétés contemporaines. En offrant la possibilité d'analyser des configurations spatiales et sociales existantes ou en tentant de simuler celles à venir, les systèmes d'information géographique sont devenus incontournables dans la gestion et dans la planification urbaine. En cinq ans la population de la ville de Lausanne est passée de 134'700 à 140'570 habitants, alors que les effectifs de l'école publique ont crû de 12'200 à 13'500 élèves. Cet accroissement démographique associé à un vaste processus d'harmonisation de la scolarité obligatoire en Suisse ont amené le Service des écoles à mettre en place et à développer en collaboration avec l'université de Lausanne des solutions SIG à même de répondre à différentes problématiques spatiales. Établies en 1989, les limites des établissements scolaires (bassins de recrutement) ont dû être redéfinies afin de les réadapter aux réalités d'un paysage urbain et politique en pleine mutation. Dans un contexte de mobilité et de durabilité, un système d'attribution de subventions pour les transports publics basé sur la distance domicile-école et sur l'âge des écoliers, a été conçu. La réalisation de ces projets a nécessité la construction de bases de données géographiques ainsi que l'élaboration de nouvelles méthodes d'analyses exposées dans ce travail. Cette thèse s'est ainsi faite selon une dialectique permanente entre recherches théoriques et nécessités pratiques. La première partie de ce travail porte sur l'analyse du réseau piéton de la ville. La morphologie du réseau est investiguée au travers d'approches multi-échelles du concept de centralité. La première conception, nommée sinuo-centralité ("straightness centrality"), stipule qu'être central c'est être relié aux autres en ligne droite. La deuxième, sans doute plus intuitive, est intitulée centricité ("closeness centrality") et exprime le fait qu'être central c'est être proche des autres (fig. 1, II). Les méthodes développées ont pour but d'évaluer la connectivité et la marchabilité du réseau, tout en suggérant de possibles améliorations (création de raccourcis piétons). Le troisième et dernier volet théorique expose et développe un algorithme de transport optimal régularisé. En minimisant la distance domicile-école et en respectant la taille des écoles, l'algorithme permet de réaliser des scénarios d'enclassement. L'implémentation des multiplicateurs de Lagrange offre une visualisation du "coût spatial" des infrastructures scolaires et des lieux de résidence des écoliers. La deuxième partie de cette thèse retrace les aspects principaux de trois projets réalisés dans le cadre de la gestion scolaire. À savoir : la conception d'un système d'attribution de subventions pour les transports publics, la redéfinition de la carte scolaire, ou encore la simulation des flux d'élèves se rendant à l'école à pied. *** May it be from an urbanistic, a social or from a governance point of view, the evolution of cities is a major challenge in our contemporary societies. By giving the opportunity to analyse spatial and social configurations or attempting to simulate future ones, geographic information systems cannot be overlooked in urban planning and management. In five years, the population of the city of Lausanne has grown from 134'700 to 140'570 inhabitants while the numbers in public schools have increased from 12'200 to 13'500 students. Associated to a considerable harmonisation process of compulsory schooling in Switzerland, this demographic rise has driven schooling services, in collaboration with the University of Lausanne, to set up and develop GIS capable of tackling various spatial issues. Established in 1989, the school districts had to be altered so that they might fit the reality of a continuously changing urban and political landscape. In a context of mobility and durability, an attribution system for public transport subventions based on the distance between residence and school and on the age of the students was designed. The implementation of these projects required the built of geographical databases as well as the elaboration of new analysis methods exposed in this thesis. The first part of this work focuses on the analysis of the city's pedestrian network. Its morphology is investigated through multi-scale approaches of the concept of centrality. The first conception, named the straightness centrality, stipulates that being central is being connected to the others in a straight line. The second, undoubtedly more intuitive, is called closeness centrality and expresses the fact that being central is being close to the others. The goal of the methods developed is to evaluate the connectivity and walkability of the network along with suggesting possible improvements (creation of pedestrian shortcuts).The third and final theoretical section exposes and develops an algorithm of regularised optimal transport. By minimising home to school distances and by respecting school capacity, the algorithm enables the production of student allocation scheme. The implementation of the Lagrange multipliers offers a visualisation of the spatial cost associated to the schooling infrastructures and to the student home locations. The second part of this thesis recounts the principal aspects of three projects fulfilled in the context of school management. It focuses namely on the built of an attribution system for public transport subventions, a school redistricting process and on simulating student pedestrian flows.
Resumo:
Parameters such as tolerance, scale and agility utilized in data sampling for using in Precision Agriculture required an expressive number of researches and development of techniques and instruments for automation. It is highlighted the employment of methodologies in remote sensing used in coupled to a Geographic Information System (GIS), adapted or developed for agricultural use. Aiming this, the application of Agricultural Mobile Robots is a strong tendency, mainly in the European Union, the USA and Japan. In Brazil, researches are necessary for the development of robotics platforms, serving as a basis for semi-autonomous and autonomous navigation systems. The aim of this work is to describe the project of an experimental platform for data acquisition in field for the study of the spatial variability and development of agricultural robotics technologies to operate in agricultural environments. The proposal is based on a systematization of scientific work to choose the design parameters utilized for the construction of the model. The kinematic study of the mechanical structure was made by the virtual prototyping process, based on modeling and simulating of the tension applied in frame, using the.