890 resultados para Discrete-time sliding mode control
Resumo:
Diese Arbeit behandelt die Problemstellung der modellbasierten Fehlerdiagnose für Lipschitz-stetige nichtlineare Systeme mit Unsicherheiten. Es wird eine neue adaptive Fehlerdiagnosemethode vorgestellt. Erkenntnisse und Verfahren aus dem Bereich der Takagi-Sugeno (TS) Fuzzy-Modellbildung und des Beobachterentwurfs sowie der Sliding-Mode (SM) Theorie werden genutzt, um einen neuartigen robusten und nichtlinearen TS-SM-Beobachter zu entwickeln. Durch diese Zusammenführung lassen sich die jeweiligen Vorteile beider Ansätze miteinander kombinieren. Bedingungen zur Konvergenz des Beobachters werden als lineare Matrizenungleichungen (LMIs) abgeleitet. Diese Bedingungen garantieren zum einen die Stabilität und liefern zum anderen ein direktes Entwurfsverfahren für den Beobachter. Der Beobachterentwurf wird für die Fälle messbarer und nicht messbarer Prämissenvariablen angegeben. Durch die TS-Erweiterung des in dieser Arbeit verwendeten SM-Beobachters ist es möglich, den diskontinuierlichen Rückführterm mithilfe einer geeigneten kontinuierlichen Funktion zu approximieren und dieses Signal daraufhin zur Fehlerdiagnose auszuwerten. Dies liefert eine Methodik zur Aktor- und Sensorfehlerdiagnose nichtlinearer unsicherer Systeme. Gegenüber anderen Ansätzen erlaubt das Vorgehen eine quantitative Bestimmung und teilweise sogar exakte Rekonstruktion des Fehlersignalverlaufs. Darüber hinaus ermöglicht der Ansatz die Berechnung konstanter Fehlerschwellen direkt aus dem physikalischen Vorwissen über das betrachtete System. Durch eine Erweiterung um eine Betriebsphasenerkennung wird es möglich, die Schwellenwerte des Fehlerdiagnoseansatzes online an die aktuelle Betriebsphase anzupassen. Hierdurch ergibt sich in Betriebsphasen mit geringen Modellunsicherheiten eine deutlich erhöhte Fehlersensitivität. Zudem werden in Betriebsphasen mit großen Modellunsicherheiten Falschalarme vermieden. Die Kernidee besteht darin, die aktuelle Betriebsphase mittels eines Bayes-Klassikators in Echtzeit zu ermitteln und darüber die Fehlerschwellen an die a-priori de nierten Unsicherheiten der unterschiedlichen Betriebsphasen anzupassen. Die E ffektivität und Übertragbarkeit der vorgeschlagenen Ansätze werden einerseits am akademischen Beispiel des Pendelwagens und anderseits am Beispiel der Sensorfehlerdiagnose hydrostatisch angetriebener Radlader als praxisnahe Anwendung demonstriert.
Resumo:
Evolutionäre Algorithmen werden gerne für Optimierungsaufgaben mit sehr vielen Freiheitsgraden eingesetzt. Eine spezielle Konvergenzeigenschaft, daß nämlich der Rechenaufwand nur mit der Wurzel der Anzahl der Unbekannten steigt, prädestiniert sie dafür. Die evolutionären Algorithmen haben aber auch noch eine weitere interessante Eigenschaft: Von der Zielfunktion wird nur verlangt, daß sie monoton ist - nichts weiter. Speziell wird, im Gegensatz zu gradientenbasierten Verfahren, keinerlei Ableitung von der Zielfunktion benötigt. Dadurch können evolutionäre Algorithmen auch in solchen Fällen eingesetzt werden, in denen Ableitungen der Zielfunktion nicht oder nur schwierig zu beschaffen sind. Die evolutionären Algorithmen kommen deshalb mit so geringen Anforderungen an die Zielfunktion aus, weil nur absolute Bewertungen einzelner Punkte (hier Vektoren) im Lösungsraum durch die Zielfunktion vorgenommen werden. Dafür werden eine gewisse Anzahl Punkte gleichzeitig betrachtet. Im direkten Vergleich untereinander relativ günstig liegende Punkte werden für die weitere Rechnung übernommen, die anderen verworfen. Aus den Komponenten der übernommenen Punkte werden nun zufällig neue Punkte zusammengesetzt und ein wenig verschoben. Dann schließt sich der Kreis, indem diese neuen Punkte ebenfalls bewertet werden. Im Verlauf einer solchen Iteration konvergiert die Punktmenge in der Regel gegen ein Optimum. Oft kommt es gerade zu Beginn der Iteration zu schnellen Fortschritten. In dieser Arbeit wird ein Verfahren vorgestellt, bei dem mit Hilfe von evolutionären Algorithmen verbessernde Eingriffe in laufenden Echtzeitsystemen vorgenommen werden. Was gut oder schlecht ist, wird zu diesem Zweck über die Zielfunktion für die Optimierung definiert. Da von der Zielfunktion letztlich das Verhalten des Gesamtsystems abhängt, sollte sie sorgfältig ausgewählt werden. Die Eingriffe in das System sind zeitlich begrenzte Steuertrajektorien. Sie werden zusätzlich zur permanent wirkenden Regelung auf das System aufgebracht. Um die Anzahl der zu optimierenden Variablen in Grenzen zu halten, werden die Steuertrajektorien durch wenige Parameter repräsentiert. Da die Steuertrajektorien im voraus berechnet werden müssen, wird das Systemverhalten mittels eines Modells für eine gewisse, in der Zukunft liegende, Zeitspanne vorhergesagt. Wird die geforderte Qualität während dieser Zeitspanne unterschritten, kann so schon im Vorfeld ein Optimierungslauf des evolutionären Algorithmus durchgeführt werden. Allerdings ist die zur Verfügung stehende Rechenzeit von vornherein begrenzt. Daher ist es wesentlich, daß die mit evolutionären Algorithmen häufig assoziierte lange Rechenzeit nicht benötigt wird. Tatsächlich läßt sich unter Umständen mit wenig Rechenzeit auskommen. Erstens wird nur mit wenigen Variablen gerechnet, zweitens kommt es bei dem beschriebenen Verfahren - halbwegs gutmütige Systeme vorausgesetzt - gar nicht auf die letzte Nachkommastelle, sondern (ähnlich wie bei Sliding-Mode-Regelungen) mehr auf eine Tendenz an. Da evolutionäre Algorithmen aber gerade zu Beginn einer Iteration die größten Fortschritte in Richtung des Optimums machen, kann schon nach vergleichsweise wenigen Schritten eine deutliche Verbesserung der Gesamtsituation erreicht werden. Gerade um eine schnelle Konvergenz zu erreichen, sind die spezielle Ausprägung und die Parameter des evolutionären Algorithmus mit Bedacht zu wählen. Dafür werden im Rahmen der Arbeit einige Experimente durchgeführt. Anhand der Ergebnisse der Experimente können konkrete Empfehlungen für eine günstige Konfiguration des evolutionären Algorithmus gegeben werden. Um es vorwegzunehmen: Zuviel Aufwand beim evolutionären Algorithmus zu treiben, lohnt sich nicht. Schon mit einfachen Konfigurationen können gute Ergebnisse erzielt werden. Die einzige Maßnahme, die sich bei den Experimenten tatsächlich als vorteilhaft herausstellte, war die Aufteilung der Gesamtpopulation (betrachtete Punktmenge im Lösungsraum) in mehrere Subpopulationen. Schließlich wird noch ein Computerprogramm beschrieben, das die Arbeitsweise des vorgestellten Verfahrens am Bildschirm erlebbar macht. Die einzelnen Komponenten werden vom Programm während der Ausführung mit einigen wesentlichen Rechengrößen visualisiert. Der Betrachter erhält so einen besseren Eindruck vom Zusammenwirken der einzelnen Verfahrens-Teile.
Resumo:
Diese Arbeit befasst sich mit der Modellbildung mechatronischer Systeme mit Reibung. Geeignete dynamische Modelle sind die Grundlage für verschiedenste Aufgabenstellungen. Sind dynamische Prozessmodelle verfügbar, so können leistungsfähige modellbasierte Entwurfsmethoden angewendet werden sowie modellbasierte Anwendungen entwickelt werden. Allerdings ist der Aufwand für die Modellbildung ein beschränkender Faktor für eine weite Verbreitung modellbasierter Applikationen in der Praxis. Eine Automatisierung des Modellbildungsprozesses ist deshalb von großem Interesse. Die vorliegende Arbeit stellt für die Klasse „mechatronischer Systeme mit Reibung“ drei Modellierungsmethoden vor: semi-physikalische Modellierung, Sliding-Mode-Beobachter-basierte Modellierung und empirische Modellierung mit einem stückweise affinen (PWA) Modellansatz. Zum Ersten wird die semi-physikalische Modellierung behandelt. Gegenüber anderen Verfahren, die häufig umfangreiche Vorkenntnisse und aufwändige Experimente erfordern, haben diese neuen Verfahren den Vorteil, dass die Modellierung von Systemen mit Reibung selbst bei begrenzten Vorkenntnissen und minimalem Experimentaufwand automatisiert werden kann. Zum Zweiten wird ein neuer Ansatz zur Reibkraftrekonstruktion und Reibmodellierung mittels Sliding-Mode-Beobachter präsentiert. Durch Verwendung des vorgestellten Sliding-Mode- Beobachters, der basierend auf einem einfachen linearen Zustandsraummodell entworfen wird, lässt sich die Reibung datengetrieben aus den Ein-/Ausgangsmessdaten (im offenen Regelkreis) rekonstruieren und modellieren. Im Vergleich zu anderen Reibmodellierungsmethoden, die häufig umfangreiche Vorkenntnisse und aufwändige Messungen im geschlossenen Regelkreis erfordern, haben diese neuen Verfahren den Vorteil, dass die Modellierung von Systemen mit Reibung selbst bei begrenzten Vorkenntnissen und minimalem Experimentaufwand weitgehend automatisiert werden kann. Zum Dritten wird ein PWA-Modellierungsansatz mit einer clusterungsbasierten Identifikationsmethode für Systeme mit Reibung vorgestellt. In dieser Methode werden die Merkmale in Hinblick auf Reibeffekte ausgewählt. Und zwar wird der klassische c-Means-Algorithmus verwendet, welcher bedienfreundlich, effizient und geeignet für große und reale Datensätze ist. Im Gegensatz zu anderen Methoden sind bei dieser Methode nur wenige Entwurfsparameter einzustellen und sie ist für reale Systeme mit Reibung einfach anwendbar. Eine weitere Neuheit der vorgestellten PWA-Methode liegt darin, dass die Kombination der Clustervaliditätsmaße und Modellprädiktionsfehler zur Festlegung der Anzahl der Teilmodelle benutzt wird. Weiterhin optimiert die vorgestellte Methode die Parameter der lokalen Teilmodelle mit der OE (Output-Fehler)-Schätzmethode. Als Anwendungsbeispiele werden Drosselklappen, Drallklappen und AGR-Ventile (Abgasrückführventil) im Dieselfahrzeug betrachtet und die erzeugten Modelle werden in der industriellen HiL-Simulation eingesetzt. Aufgrund der Effizienz und Effektivität der Modellierungsmethoden sind die vorgestellten Methoden direkt in der automobilen Praxis einsetzbar.
Resumo:
Piecewise linear models systems arise as mathematical models of systems in many practical applications, often from linearization for nonlinear systems. There are two main approaches of dealing with these systems according to their continuous or discrete-time aspects. We propose an approach which is based on the state transformation, more particularly the partition of the phase portrait in different regions where each subregion is modeled as a two-dimensional linear time invariant system. Then the Takagi-Sugeno model, which is a combination of local model is calculated. The simulation results show that the Alpha partition is well-suited for dealing with such a system
Determinantes de la deserción universitaria en la Facultad de Economía de la Universidad del Rosario
Resumo:
Este trabajo analiza el problema de la deserción estudiantil en la Facultad de Economía de la Universidad del Rosario, a través del estudio de los factores individuales, académicos y socioeconómicos que implican el riesgo de desertar. Con este objetivo, se utiliza el análisis de modelos de duración. Específi camente, se estima un modelo de riesgo proporcional de tiempo discreto con y sin heterogeneidad observada (Prentice- Gloeckler, 1978 y Meyer, 1980). Los resultados muestran que los estudiantes de sexo masculino, la vinculación de los estudiantes al mercado laboral y los estudiantes provenientes de otras regiones, tienen el mayor riesgo de deserción. Además, la edad del estudiante incrementa el riesgo, sin embargo, su efecto decrece marginalmente al aumentar la edad. Palabras clave: deserción estudiantil, modelos de duración, riesgo proporcional. Clasifi cación JEL: C41, C13, I21.
Resumo:
El presente trabajo se enfoca en el análisis de las acciones de Ecopetrol, empresa representativa del mercado de Extracción de Petróleo y Gas natural en Colombia (SP&G), durante el periodo, del 22 de mayo de 2012 al 30 de agosto de 2013. Durante este espacio de tiempo la acción sufrió una serie de variaciones en su precio las cuales se relacionaban a la nueva emisión de acciones que realizo la Compañía. Debido a este cambio en el comportamiento del activo se generaron una serie de interrogantes sobre, (i) la reacción del mercado ante diferentes sucesos ocurridos dentro de las firmas y en su entorno (ii) la capacidad de los modelos financieros de predecir y entender las posibles reacciones observadas de los activos (entendidos como deuda). Durante el desarrollo del presente trabajo se estudiará la pertinencia del mismo, en línea con los objetivos y desarrollos de la Escuela de Administración de la Universidad del Rosario. Puntualmente en temas de Perdurabilidad direccionados a la línea de Gerencia. Donde el entendimiento de la deuda como parte del funcionamiento actual y como variable determinante para el comportamiento futuro de las organizaciones tiene especial importancia. Una vez se clarifica la relación entre el presente trabajo y la Universidad, se desarrollan diferentes conceptos y teorías financieras que han permitido conocer y estudiar de manera más específica el mercado, con el objetivo de reducir los riesgos de las inversiones realizadas. Éste análisis se desarrolla en dos partes: (i) modelos de tiempo discreto y (ii) modelos de tiempo continúo. Una vez se tiene mayor claridad sobre los modelos estudiados hasta el momento se realiza el respectivo análisis de los datos mediante modelos de caos y análisis recurrente los cuales nos permiten entender que las acciones se comportan de manera caótica pero que establecen ciertas relaciones entre los precios actuales y los históricos, desarrollando comportamientos definidos entre los precios, las cantidades, el entorno macroeconómico y la organización. De otra parte, se realiza una descripción del mercado de petróleo en Colombia y se estudia a Ecopetrol como empresa y eje principal del mercado descrito en el país. La compañía Ecopetrol es representativa debido a que es uno de los mayores aportantes fiscales del país, pues sus ingresos se desprenden de bienes que se encuentran en el subsuelo por lo que la renta petrolera incluye impuestos a la producción transformación y consumo (Ecopetrol, 2003). Por último, se presentan los resultados del trabajo, así como el análisis que da lugar para presentar ciertas recomendaciones a partir de lo observado.
Resumo:
We propose and analyse a class of evolving network models suitable for describing a dynamic topological structure. Applications include telecommunication, on-line social behaviour and information processing in neuroscience. We model the evolving network as a discrete time Markov chain, and study a very general framework where, conditioned on the current state, edges appear or disappear independently at the next timestep. We show how to exploit symmetries in the microscopic, localized rules in order to obtain conjugate classes of random graphs that simplify analysis and calibration of a model. Further, we develop a mean field theory for describing network evolution. For a simple but realistic scenario incorporating the triadic closure effect that has been empirically observed by social scientists (friends of friends tend to become friends), the mean field theory predicts bistable dynamics, and computational results confirm this prediction. We also discuss the calibration issue for a set of real cell phone data, and find support for a stratified model, where individuals are assigned to one of two distinct groups having different within-group and across-group dynamics.
Resumo:
Four protocols involving the application of low pressures, either toward the end of frying or after frying, were investigated with the aim of lowering the oil content of potato chips. Protocol 1 involving frying at atmospheric pressure followed by a 3 min draining time constituted the control. Protocol 2 involved lowering of pressure to 13.33 kPa, 40 s before the end of frying, followed by draining for 3 min at the same pressure. Protocol 3 was the same as protocol 2, except that the pressure was lowered 3 s before the end of frying. Protocol 4 involved lowering the pressure to 13.33 kPa after the product was lifted from the oil and holding it at this value over the draining time of 3 min. Protocol 4 gave a product having the lowest oil content (37.12 g oil/100 g defatted dry matter), while protocol 2 gave the product with highest oil content (71.10 g oil/100 g defatted dry matter), followed by those obtained using protocols 1 and 3(68.48 g oil/100 g defatted dry matter and 52.50 g oil/100 g defatted dry matter, respectively). Protocol 4 was further evaluated to study the effects of draining times and vacuum applied, and compared with the control. It was noted that over the modest range of pressures investigated, there was no significant effect of the vacuum applied on the oil content of the product. This study demonstrates that the oil content of potato chips can be lowered significantly by combining atmospheric frying with draining under vacuum.
Resumo:
Background: Association mapping, initially developed in human disease genetics, is now being applied to plant species. The model species Arabidopsis provided some of the first examples of association mapping in plants, identifying previously cloned flowering time genes, despite high population sub-structure. More recently, association genetics has been applied to barley, where breeding activity has resulted in a high degree of population sub-structure. A major genotypic division within barley is that between winter- and spring-sown varieties, which differ in their requirement for vernalization to promote subsequent flowering. To date, all attempts to validate association genetics in barley by identifying major flowering time loci that control vernalization requirement (VRN-H1 and VRN-H2) have failed. Here, we validate the use of association genetics in barley by identifying VRN-H1 and VRN-H2, despite their prominent role in determining population sub-structure. Results: By taking barley as a typical inbreeding crop, and seasonal growth habit as a major partitioning phenotype, we develop an association mapping approach which successfully identifies VRN-H1 and VRN-H2, the underlying loci largely responsible for this agronomic division. We find a combination of Structured Association followed by Genomic Control to correct for population structure and inflation of the test statistic, resolved significant associations only with VRN-H1 and the VRN-H2 candidate genes, as well as two genes closely linked to VRN-H1 (HvCSFs1 and HvPHYC). Conclusion: We show that, after employing appropriate statistical methods to correct for population sub-structure, the genome-wide partitioning effect of allelic status at VRN-H1 and VRN-H2 does not result in the high levels of spurious association expected to occur in highly structured samples. Furthermore, we demonstrate that both VRN-H1 and the candidate VRN-H2 genes can be identified using association mapping. Discrimination between intragenic VRN-H1 markers was achieved, indicating that candidate causative polymorphisms may be discerned and prioritised within a larger set of positive associations. This proof of concept study demonstrates the feasibility of association mapping in barley, even within highly structured populations. A major advantage of this method is that it does not require large numbers of genome-wide markers, and is therefore suitable for fine mapping and candidate gene evaluation, especially in species for which large numbers of genetic markers are either unavailable or too costly.
Resumo:
This work proposes a method to objectively determine the most suitable analogue redesign method for forward type converters under digital voltage mode control. Particular emphasis is placed on determining the method which allows the highest phase margin at the particular switching and crossover frequencies chosen by the designer. It is shown that at high crossover frequencies with respect to switching frequency, controllers designed using backward integration have the largest phase margin; whereas at low crossover frequencies with respect to switching frequency, controllers designed using bilinear integration have the largest phase margins. An accurate model of the power stage is used for simulation, and experimental results from a Buck converter are collected. The performance of the digital controllers is compared to that of the equivalent analogue controller both in simulation and experiment. Excellent correlation between the simulation and experimental results is presented. This work will allow designers to confidently choose the analogue redesign method which yields the greater phase margin for their application.
Resumo:
We consider the problem of discrete time filtering (intermittent data assimilation) for differential equation models and discuss methods for its numerical approximation. The focus is on methods based on ensemble/particle techniques and on the ensemble Kalman filter technique in particular. We summarize as well as extend recent work on continuous ensemble Kalman filter formulations, which provide a concise dynamical systems formulation of the combined dynamics-assimilation problem. Possible extensions to fully nonlinear ensemble/particle based filters are also outlined using the framework of optimal transportation theory.
Resumo:
This article proposes a systematic approach to determine the most suitable analogue redesign method to be used for forward-type converters under digital voltage mode control. The focus of the method is to achieve the highest phase margin at the particular switching and crossover frequencies chosen by the designer. It is shown that at high crossover frequencies with respect to switching frequency, controllers designed using backward integration have the largest phase margin; whereas at low crossover frequencies with respect to switching frequency, controllers designed using bilinear integration with pre-warping have the largest phase margins. An algorithm has been developed to determine the frequency of the crossing point where the recommended discretisation method changes. An accurate model of the power stage is used for simulation and experimental results from a Buck converter are collected. The performance of the digital controllers is compared to that of the equivalent analogue controller both in simulation and experiment. Excellent closeness between the simulation and experimental results is presented. This work provides a concrete example to allow academics and engineers to systematically choose a discretisation method.
Resumo:
A discrete-time random process is described, which can generate bursty sequences of events. A Bernoulli process, where the probability of an event occurring at time t is given by a fixed probability x, is modified to include a memory effect where the event probability is increased proportionally to the number of events that occurred within a given amount of time preceding t. For small values of x the interevent time distribution follows a power law with exponent −2−x. We consider a dynamic network where each node forms, and breaks connections according to this process. The value of x for each node depends on the fitness distribution, \rho(x), from which it is drawn; we find exact solutions for the expectation of the degree distribution for a variety of possible fitness distributions, and for both cases where the memory effect either is, or is not present. This work can potentially lead to methods to uncover hidden fitness distributions from fast changing, temporal network data, such as online social communications and fMRI scans.
Resumo:
A particle filter method is presented for the discrete-time filtering problem with nonlinear ItA ` stochastic ordinary differential equations (SODE) with additive noise supposed to be analytically integrable as a function of the underlying vector-Wiener process and time. The Diffusion Kernel Filter is arrived at by a parametrization of small noise-driven state fluctuations within branches of prediction and a local use of this parametrization in the Bootstrap Filter. The method applies for small noise and short prediction steps. With explicit numerical integrators, the operations count in the Diffusion Kernel Filter is shown to be smaller than in the Bootstrap Filter whenever the initial state for the prediction step has sufficiently few moments. The established parametrization is a dual-formula for the analysis of sensitivity to gaussian-initial perturbations and the analysis of sensitivity to noise-perturbations, in deterministic models, showing in particular how the stability of a deterministic dynamics is modeled by noise on short times and how the diffusion matrix of an SODE should be modeled (i.e. defined) for a gaussian-initial deterministic problem to be cast into an SODE problem. From it, a novel definition of prediction may be proposed that coincides with the deterministic path within the branch of prediction whose information entropy at the end of the prediction step is closest to the average information entropy over all branches. Tests are made with the Lorenz-63 equations, showing good results both for the filter and the definition of prediction.
Resumo:
We study stochastic billiards on general tables: a particle moves according to its constant velocity inside some domain D R(d) until it hits the boundary and bounces randomly inside, according to some reflection law. We assume that the boundary of the domain is locally Lipschitz and almost everywhere continuously differentiable. The angle of the outgoing velocity with the inner normal vector has a specified, absolutely continuous density. We construct the discrete time and the continuous time processes recording the sequence of hitting points on the boundary and the pair location/velocity. We mainly focus on the case of bounded domains. Then, we prove exponential ergodicity of these two Markov processes, we study their invariant distribution and their normal (Gaussian) fluctuations. Of particular interest is the case of the cosine reflection law: the stationary distributions for the two processes are uniform in this case, the discrete time chain is reversible though the continuous time process is quasi-reversible. Also in this case, we give a natural construction of a chord ""picked at random"" in D, and we study the angle of intersection of the process with a (d - 1) -dimensional manifold contained in D.