Constraint-based modelling of mixed microbial populations: Application to polyhydroxyalkanoates production

Dissertação para obtenção do Grau de Doutor em Engenharia Química e Bioquímica

Clearing the cloudy crystal balls: Hybrid modelling for energy and climate change mitigation scenarios – A case study for Portugal

Dissertação para obtenção do Grau de Doutor em Ambiente

Modelling of a wastewater treatment plant using GPS-X

Dissertation to obtain the degree of Master in Chemical and Biochemical Engineering

Influence of Lean and Green on supply chain performance: an interpretive structural modelling model

This work aims to identify and rank a set of Lean and Green practices and supply chain performance measures on which managers should focus to achieve competitiveness and improve the performance of automotive supply chains. The identification of the contextual relationships among the suggested practices and measures, was performed through literature review. Their ranking was done by interviews with professionals from the automotive industry and academics with wide knowledge on the subject. The methodology of interpretive structural modelling (ISM) is a useful methodology to identify inter relationships among Lean and Green practices and supply chain performance measures and to support the evaluation of automotive supply chain performance. Using the ISM methodology, the variables under study were clustered according to their driving power and dependence power. The ISM methodology was proposed to be used in this work. The model intends to provide a better understanding of the variables that have more influence (driving variables), the others and those which are most influenced (dependent variables) by others. The information provided by this model is strategic for managers who can use it to identify which variables they should focus on in order to have competitive supply chains.

Application of geographic information system and modelling in health impact assessment for urban road mobility in Vietnam

Transport is an essential sector in modern societies. It connects economic sectors and industries. Next to its contribution to economic development and social interconnection, it also causes adverse impacts on the environment and results in health hazards. Transport is a major source of ground air pollution, especially in urban areas, and therefore contributing to the health problems, such as cardiovascular and respiratory diseases, cancer, and physical injuries. This thesis presents the results of a health risk assessment that quantifies the mortality and the diseases associated with particulate matter pollution resulting from urban road transport in Hai Phong City, Vietnam. The focus is on the integration of modelling and GIS approaches in the exposure analysis to increase the accuracy of the assessment and to produce timely and consistent assessment results. The modelling was done to estimate traffic conditions and concentrations of particulate matters based on geo-references data. A simplified health risk assessment was also done for Ha Noi based on monitoring data that allows a comparison of the results between the two cases. The results of the case studies show that health risk assessment based on modelling data can provide a much more detail results and allows assessing health impacts of different mobility development options at micro level. The use of modeling and GIS as a common platform for the integration of different assessments (environmental, health, socio-economic, etc.) provides various strengths, especially in capitalising on the available data stored in different units and forms and allows handling large amount of data. The use of models and GIS in a health risk assessment, from a decision making point of view, can reduce the processing/waiting time while providing a view at different scales: from micro scale (sections of a city) to a macro scale. It also helps visualising the links between air quality and health outcomes which is useful discussing different development options. However, a number of improvements can be made to further advance the integration. An improved integration programme of the data will facilitate the application of integrated models in policy-making. Data on mobility survey, environmental monitoring and measuring must be standardised and legalised. Various traffic models, together with emission and dispersion models, should be tested and more attention should be given to their uncertainty and sensitivity

Numerical modelling of compound channel flow

Fundação para a Ciência e a Tecnologia (FCT) - SFRH/BD/64337/2009 ; projects PTDC/ECM/70652/2006, PTDC/ECM/117660/2010 and RECI/ECM-HID/0371/2012

DYNAMOD – A dynamic agent based modelling framework for digital businesses

Digital Businesses have become a major driver for economic growth and have seen an explosion of new startups. At the same time, it also includes mature enterprises that have become global giants in a relatively short period of time. Digital Businesses have unique characteristics that make the running and management of a Digital Business much different from traditional offline businesses. Digital businesses respond to online users who are highly interconnected and networked. This enables a rapid flow of word of mouth, at a pace far greater than ever envisioned when dealing with traditional products and services. The relatively low cost of incremental user addition has led to a variety of innovation in pricing of digital products, including various forms of free and freemium pricing models. This thesis explores the unique characteristics and complexities of Digital Businesses and its implications on the design of Digital Business Models and Revenue Models. The thesis proposes an Agent Based Modeling Framework that can be used to develop Simulation Models that simulate the complex dynamics of Digital Businesses and the user interactions between users of a digital product. Such Simulation models can be used for a variety of purposes such as simple forecasting, analysing the impact of market disturbances, analysing the impact of changes in pricing models and optimising the pricing for maximum revenue generation or a balance between growth in usage and revenue generation. These models can be developed for a mature enterprise with a large historical record of user growth rate as well as for early stage enterprises without much historical data. Through three case studies, the thesis demonstrates the applicability of the Framework and its potential applications.

Definição do conceito de blended learning. Proposta metodológica no quadro da terminologia de base conceptual

Sustentado numa abordagem conceptual da Terminologia, o trabalho de investigação que a seguir se desenvolve visa propor um cenário de resposta à questão: como se define o blended learning no contexto educativo de Ensino Superior Pós-Bolonha? A necessidade de compreender, delimitar e harmonizar o conceito de blended learning no panorama actual do Ensino Superior, resulta do pressuposto de que muito embora proliferem descrições de práticas e modelos para a sua operacionalização de reconhecida qualidade - tal como sucede com outros conceitos sob alçada da educação a distância - a reflexão teórica é ainda insuficiente. Com efeito, para responder à questão supra-colocada, propõe-se o desenho de uma metodologia para construção de uma definição intensional do conceito de blended learning que herde, subsuma e melhore o conhecimento existente, identificado através da análise de texto para fins onomasiológicos e de um processo de elicitação de conhecimento tácito e de negociação discursiva junto de sujeitos especializados. A proposta de desenho metodológico que neste trabalho de esboça escora-se globalmente em três etapas: (1) etapa exploratória do domínio-objecto de estudo; (2) etapa de análise onamasiológica de evidência textual e discursiva; (3) etapa de modelização e de validação de resultados. Pretende-se, em primeiro lugar, através do estudo do espaço conceptual das modalidades de educação que se situam no continuum presença-distância sistematizar e ordenar as visões analisadas, propondo representações de educação presencial, educação a distância, e-learning, educação online, aprendizagem enriquecida por tecnologias e ainda de outras modalidades emergentes. As representações assumem o carácter de proposta aberta e decorrem da necessidade de uma primeira ordenação no sentido de topografrar, delineando - a um nível macro - o possível lugar do conceito de blended learning naquele cenário. Num segundo momento, aprofunda-se e circunscreve-se a análise, depurando a evidência observada, agora reduzida a um conjunto de contextos ricos em informação conceptual – um corpus escrito e oral de definições e descrições de blended learning – identificando candidatas a características essenciais e candidatas a características acidentais. Num terceiro momento, procede-se à modelização do conhecimento, encapsulando-a numa proposta de definição sujeita a um processo iterativo e reflexivo, constituído por um conjunto de ciclos de investigação-acção, os quais reflectem a sequência de interacções entre o terminólogo e sujeitos especializados. Defender-se-á que a experimentação deste desenho revela a produtividade de uma sequência cíclica entre a análise textual e discursiva para fins onomasiológicos, a interacção colaborativa e a introspecção. Por outras palavras, embora a natureza do estudo realizado não permita a generalização, para além da relação diádica de mediação que o terminológo estabelece com o especialista, defende-se a produtividade de um procedimento de acção-reflexão autónomo, solitário e introspectivo, no âmbito da qual o terminólogo se afirma como sujeito conceptualizador, decisor e interventor. Resultam deste percurso uma proposta de definição e de descrição de blended learning em língua portuguesa que acreditamos poder servir diferentes actores da comunidade académica envolvida neste domínio de especialidade.

The thermal effects on the methanol-to-olefins reaction: A modelling and experimental approach

With the projection of an increasing world population, hand-in-hand with a journey towards a bigger number of developed countries, further demand on basic chemical building blocks, as ethylene and propylene, has to be properly addressed in the next decades. The methanol-to-olefins (MTO) is an interesting reaction to produce those alkenes using coal, gas or alternative sources, like biomass, through syngas as a source for the production of methanol. This technology has been widely applied since 1985 and most of the processes are making use of zeolites as catalysts, particularly ZSM-5. Although its selectivity is not especially biased over light olefins, it resists to a quick deactivation by coke deposition, making it quite attractive when it comes to industrial environments; nevertheless, this is a highly exothermic reaction, which is hard to control and to anticipate problems, such as temperature runaways or hot-spots, inside the catalytic bed. The main focus of this project is to study those temperature effects, by addressing both experimental, where the catalytic performance and the temperature profiles are studied, and modelling fronts, which consists in a five step strategy to predict the weight fractions and activity. The mind-set of catalytic testing is present in all the developed assays. It was verified that the selectivity towards light olefins increases with temperature, although this also leads to a much faster catalyst deactivation. To oppose this effect, experiments were carried using a diluted bed, having been able to increase the catalyst lifetime between 32% and 47%. Additionally, experiments with three thermocouples placed inside the catalytic bed were performed, analysing the deactivation wave and the peaks of temperature throughout the bed. Regeneration was done between consecutive runs and it was concluded that this action can be a powerful means to increase the catalyst lifetime, maintaining a constant selectivity towards light olefins, by losing acid strength in a steam stabilised zeolitic structure. On the other hand, developments on the other approach lead to the construction of a raw basic model, able to predict weight fractions, that should be tuned to be a tool for deactivation and temperature profiles prediction.

Recensão: Peter Goldie e Elisabeth Schellekens, Who’s Afraid of Conceptual Art?

Recensão de: Peter Goldie e Elisabeth Schellekens, Who’s Afraid of Conceptual Art?, Londres e Nova Iorque: Routledge, 2010

Rating corporate groups a modelling experience

This paper aims to provide a model that allows BPI to measure the credit risk, through its rating scale, of the subsidiaries included in the corporate groups who are their clients. This model should be simple enough to be applied in practice, accurate, and must give consistent results in comparison to what have been the ratings given by the bank. The model proposed includes operational, strategic, and financial factors and ends up giving one of three results: no support, partial support, or full support from the holding to the subsidiary, and each of them translates in adjustments in each subsidiary’s credit rating. As it would be expectable, most of the subsidiaries should have the same credit rating of its parent company.

Estrutura Conceptual do Relato Financeiro : Da Definição de um Domínio à Sua Análise para uma Sociedade em Rede

Considerando a língua como um produto da sociedade, mas também como um meio fundamental para o estabelecimento de relações entre os homens, procuramos perceber o seu lugar na sociedade globalizada, com o objectivo de desenvolver uma metodologia de análise terminológica que contribua para uma maior qualidade da comunicação especializada na sociedade em rede. Este trabalho está organizado em duas partes, sendo a primeira dedicada à reflexão sobre o papel da língua na sociedade em rede, focando questões essenciais em torno da tensão existente entre o multilinguismo e a hegemonia do inglês enquanto lingua franca, sobretudo no espaço europeu. Interessa-nos, por um lado, reflectir sobre a definição de políticas linguísticas, concretamente na Europa multilingue dos 28, e, por outro, salientar o papel preponderante que a língua tem na transmissão do conhecimento. A segunda parte deste trabalho concretiza a investigação efectuada na primeira com base na análise do relato financeiro, um domínio do saber que não só é inerentemente multilingue ¾ porque a sua aplicação é transnacional ¾ mas também reflecte a tensão identificada na primeira parte, na medida em que o inglês assume, no mundo dos negócios em geral e nos mercados financeiros em particular, o papel hegemónico de lingua franca. A abordagem terminológica que defendemos é semasiológica para fins onomasiológicos, pelo que partimos da análise do texto de especialidade, organizado em corpora de especialidade. Discutimos subsequentemente os resultados da nossa análise com os especialistas que os irão validar e cuja colaboração em diversos vi momentos do processo de análise terminológica e conceptual é fundamental para garantir a qualidade dos recursos terminológicos produzidos. Nesta óptica, exploramos um corpus de textos legislativos no âmbito do Sistema de Normalização Contabilística (SNC), de modo a delinearmos uma metodologia de trabalho que, no futuro, conduzirá à construção de uma base de dados terminológica do relato financeiro. Concomitantemente, efectuamos também um estudo sobre a Estrutura Conceptual do SNC, para o qual elaboramos uma comparação ao nível da tradução especializada no relato financeiro, com base num corpus paralelo composto pela legislação contabilística internacional endossada pela União Europeia. Utilizamos o corpus paralelo constituído por textos redigidos originalmente em inglês e traduzidos para português, em articulação com o corpus de especialidade criado com a legislação relativa ao normativo contabilístico português, para testar uma metodologia de extracção de equivalentes. Defendemos, por fim, que a harmonização no relato financeiro para além de se reger por políticas contabilísticas comuns, deve ter subjacentes questões terminológicas. É necessário, portanto, harmonizar a terminologia do relato financeiro, possibilitando aos especialistas uma comunicação em português isenta da interferência do inglês herdado das normas internacionais, através dos dois processos que identificamos: a tradução e a adaptação das Normas Internacionais de Contabilidade.

Conceptual-physical bridging – From BPMN models to physical implementations on kettle

Developing and implementing data-oriented workflows for data migration processes are complex tasks involving several problems related to the integration of data coming from different schemas. Usually, they involve very specific requirements - every process is almost unique. Having a way to abstract their representation will help us to better understand and validate them with business users, which is a crucial step for requirements validation. In this demo we present an approach that provides a way to enrich incrementally conceptual models in order to support an automatic way for producing their correspondent physical implementation. In this demo we will show how B2K (Business to Kettle) system works transforming BPMN 2.0 conceptual models into Kettle data-integration executable processes, approaching the most relevant aspects related to model design and enrichment, model to system transformation, and system execution.

A domain-specific language for ETL patterns specification in Data Warehousing Systems

During the last few years many research efforts have been done to improve the design of ETL (Extract-Transform-Load) systems. ETL systems are considered very time-consuming, error-prone and complex involving several participants from different knowledge domains. ETL processes are one of the most important components of a data warehousing system that are strongly influenced by the complexity of business requirements, their changing and evolution. These aspects influence not only the structure of a data warehouse but also the structures of the data sources involved with. To minimize the negative impact of such variables, we propose the use of ETL patterns to build specific ETL packages. In this paper, we formalize this approach using BPMN (Business Process Modelling Language) for modelling more conceptual ETL workflows, mapping them to real execution primitives through the use of a domain-specific language that allows for the generation of specific instances that can be executed in an ETL commercial tool.