Enhancement of thermal stability, strength and extensibility of lipid-based polyurethanes with cellulose-based nanofibers

Cellulose was extracted from lignocellulosic fibers and nanocrystalline cellulose (NC) prepared by alkali treatment of the fiber, steam explosion of the mercerized fiber, bleaching of the steam exploded fiber and finally acid treatment by 5% oxalic acid followed again by steam explosion. The average length and diameter of the NC were between 200-250 nm and 4-5 nm, respectively, in a monodisperse distribution. Different concentrations of the NC (0.1, 0.5, 1.0, 1.5, 2.0 and 2.5% by weight) were dispersed non-covalently into a completely bio-based thermoplastic polyurethane (TPU) derived entirely from oleic acid. The physical properties of the TPU nanocomposites were assessed by Fourier Transform Infra-Red spectroscopy (FTIR), Thermo-Gravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), X-Ray Diffraction (XRD), Dynamic Mechanical Analysis (DMA) and Mechanical Properties Analysis. The nanocomposites demonstrated enhanced stress and elongation at break and improved thermal stability compared to the neat TPU. The best results were obtained with 0.5% of NC in the TPU. The elongation at break of this sample was improved from 178% to 269% and its stress at break from 29.3 to 40.5 MPa. In this and all other samples the glass transition temperature, melting temperature and crystallization behavior were essentially unaffected. This finding suggests a potential method of increasing the strength and the elongation at break of typically brittle and weak lipid-based TPUs without alteration of the other physico-chemical properties of the polymer. (C) 2012 Elsevier Ltd. All rights reserved.

Corn seed treatment with naphthalic anhydride against isoxaflutole phytotoxication action

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Compósito reforçado com sisal para aplicação na moda

The objective of this research is the fabrication of a composite reinforced with dyed sisal fiber and polyester matrix for application in the fields such as, fashion, clothing, interior textiles; fashion accessories are some of the examples. For the fabrication of the composite, the sisal fibers were subjected to processes such as: chemical treatment with sodium hydroxide (NaOH) in the removal of impurities; bleaching for removing the yellowish color of the natural fiber and dyeing with direct dyes to confer the colors blue, green and orange. The search for new technologies ecologically correct has become a major concern in recent decades. Studies show that composite polymer reinforced by natural fibers is suitable for a large number of applications, and its use is advantageous in terms of economic and ecological. The dyed fibers were cut to a length of 30 mm, is used in the confection of webs. For this purpose, a web preparer by immersion, developed in the Laboratory of Chemical Textile of UFRN. The composite sheets measuring 300 x 300 x3 mm were molded by compression, with unsaturated orthophthalic polyester as matrix, and the samples in sizes 150 x 25 x 3 mm were cut with the aid of a laser machine, to be subjected to traction and flexion. The mechanical properties of traction and flexion in three points were performed in the Laboratory of metal and mechanical tests of Materials Engineering of UFRN. The resulting samples from the tests were evaluated in scanning electron microscope (SEM) at CTGas RN. On the basis of the analysis of the results from the mechanical tests, it was observed that the composite had good mechanical behavior, both in traction as in flexion. Furthermore, it was observed that in the water absorption test, the samples had a different percentage among themselves, this occurred due to the variation of density found in the fibre webs. The images of the SEM showed the failures from the manufacturing process and the adhesion of fibre/matrix. When the samples were prepared with the dyed fibers to be applied in fashion, the results were positive, and it can be concluded that the main objective of this work was achieved

Uso de herbicidas no consórcio de milho safrinha com Brachiaria ruziziensis

O trabalho foi realizado com o objetivo de avaliar o desempenho de Brachiaria ruziziensis cultivada em consórcio com milho safrinha, mediante a utilização dos herbicidas atrazine (1.760 g i.a. ha-1), mesotrione (60 g i.a. ha-1), mesotrione + atrazine (1.760 e 60 g i.a. ha-1) e nicosulfuron (8 e 16 g i.a. ha-1), aplicados aos 14 e 24 dias após a emergência das plantas de braquiária. O milho foi semeado mecanicamente no dia 7/3/2008 em linhas de 0,90 m, com uma linha intercalar de B. ruziziensis. O atrazine não causou sinais visíveis de toxicidade nas folhas de B. ruziziensis, enquanto o mesotrione causou branqueamento das pontas das folhas, mas proporcionou retomada rápida do crescimento. O nicosulfuron provocou clorose foliar, com necrose e redução do crescimento, sem recuperação total das plantas de B. ruziziensis durante o crescimento do milho, ocasionando baixo rendimento de massa da forrageira. Os colmos velhos, crescidos durante o cultivo do milho, são responsáveis pelo maior rendimento de massa da braquiária e são pouco afetados pelo atrazine e mesotrione, que podem ser utilizados no cultivo consorciado. O rendimento de grãos do milho safrinha não foi alterado significativamente pelos tratamentos.

Structure, morphology and thermal characteristics of banana nano fibers obtained by steam explosion

In this work, cellulose nanofibers were extracted from banana fibers via a steam explosion technique. The chemical composition, morphology and thermal properties of the nanofibers were characterized to investigate their suitability for use in bio-based composite material applications. Chemical characterization of the banana fibers confirmed that the cellulose content was increased from 64% to 95% due to the application of alkali and acid treatments. Assessment of fiber chemical composition before and after chemical treatment showed evidence for the removal of non-cellulosic constituents such as hemicelluloses and lignin that occurred during steam explosion, bleaching and acid treatments. Surface morphological studies using SEM and AFM revealed that there was a reduction in fiber diameter during steam explosion followed by acid treatments. Percentage yield and aspect ratio of the nanofiber obtained by this technique is found to be very high in comparison with other conventional methods. TGA and DSC results showed that the developed nanofibers exhibit enhanced thermal properties over the untreated fibers. (C) 2010 Elsevier Ltd. All rights reserved.

Effects of oxidation of lysozyme by hypohalous acids and haloamines on enzymatic activity and aggregation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Antioxidant activity of Maytenus ilicifolia root bark

Maytenus ilicifolia is an important plant with potential on cancer treatment and has been largely used in Brazil and other countries. We have evaluated the crude ethanolic extract of M. ilicifolia as a potential antioxidant source using an assay based on the bleaching of the radical monocation 2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS(center dot+)) and by HOCl scavenger capacity. Trolox and uric acid were used as positive controls. The results indicated M. ilicifolia root bark as a great source of antioxidants based on its potential as scavenger of radicals. (c) 2006 Elsevier B.V. All rights reserved.

CHEMICAL MODIFICATION EFFECT on THE MECHANICAL PROPERTIES of HIPS/COCONUT FIBER COMPOSITES

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Changes in the stiffness of demineralized dentin following application of tooth whitening agents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Surface Roughness Analysis of Four Restorative Materials Exposed to 10% and 15% Carbamide Peroxide

The aim of this study was to evaluate the effects of carbamide peroxide (CP) on surfaces of different restorative materials. Porcelain, composite resin, glass ionomer, and amalgam were analyzed in this study. Surface roughness (Ra) was measured before and after treatment with 10% and 15% CP. Fifteen percent CP increased Ra values in both the glass ionomer and amalgam subgroups, while 10% CP increased Ra values in the glass ionomer subgroup only. Changes in restorative material surfaces can be more severe when bleaching is completed without a clinician's supervision. Hence, thorough patient examinations must be done before, during, and after bleaching treatment. Int J Prosthodont 2011;24:155-157

Effect of Sodium Ascorbate on Tag Formation in Bleached Enamel

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Color Stability Comparison of Silicone Facial Prostheses Following Disinfection

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Urgências em traumatismos dentários: classificação, características e procedimentos

OBJETIVO: Discutir os aspectos das urgências odontológicas relacionadas aos traumatismos dentários, disponibilizando mais informações para médicos pediatras ou plantonistas de serviços de atendimento de urgências e emergências. FONTES DE DADOS: O levantamento dos dados foi realizado na base de dados Pubmed e Bireme, selecionando os artigos dos últimos 13 anos. As palavras-chave utilizadas foram: traumatismo dentário, dente decíduo e dente permanente. Os critérios de inclusão utilizados foram: artigos em inglês e português sobre incidência, prevalência e etiologia, guias de procedimentos e casos clínicos apenas de traumatismo dentário, sendo excluídos artigos de clareamento de dentes traumatizados, traumas faciais ósseos e casos clínicos de acompanhamento reduzido. SÍNTESE DOS DADOS: Os dados foram descritos de forma concisa para se tornar um guia de fácil leitura e rápido acesso em relação à conduta, necessidade de atendimento imediato e correta escolha de soluções para armazenagem dos dentes e fragmentos. CONCLUSÕES: O conhecimento sobre o assunto, a agilidade no tratamento de urgência e o correto encaminhamento do paciente proporcionam melhor prognóstico.

Fracture resistance of bleached teeth restored with different procedures

This study evaluated the fracture resistance of teeth submitted to internal bleaching and restored with different non-metallic post. Eighty mandibular incisors were endodontically treated and randomly divided in 10 groups (n = 8): G1- restored with composite resin (CR), G2- CR + fiber-reinforced composite post (FRC, Everstick post, Sticktech) cemented with resin cement self-etch adhesive (RCS, Panavia F 2.0, Kuraray), G3- CR + FRC + self-adhesive resin cement (SRC, Breeze, Pentral Clinical), G4- CR+ glass fiber post (GF, Exacto Post, Angelus) + RCS, G5- CR + GF + SRC. The G6 to G10 were bleached with hydrogen peroxide (HP) and restored with the same restorative procedures used for G1 to G5, respectively. After 7 days storage in artificial saliva, the specimens were submitted to the compressive strength test (N) at 0.5 mm/min cross-head speed and the failure pattern was identified as either reparable (failure showed until 2 mm below the cement-enamel junction) or irreparable (the failure showed <2 mm or more below the cement-enamel). Data were analyzed by ANOVA and Tukey test (α = 0.05). No significant difference (p < 0.05) was found among G1 to G10. The results suggest that intracoronal bleaching did not significantly weaken the teeth and the failure patterns were predominately reparable for all groups. The non-metallic posts in these teeth did not improve fracture resistance.

TIME-COURSE DIFFUSION of HYDROGEN PEROXIDE USING MODERN TECHNOLOGIES

The concern with the hydrogen penetration towards the pulp can be observed on the literature by the great number of papers published on this topic; Those measurements often uses chemical agents to quantify the concentration of the bleaching agent that cross the enamel and dentin. The objective of this work was the quantification of oxygen free radicals by fluorescence that are located in the interface between enamel and dentin. It was used to accomplish our objectives a Ruthenium probe (FOXY R - Ocean Optics(R)) a 405nm LED, a bovine tooth and a portable diagnostic system (Science and support LAB - LAT - IFSC/USP). The fluorescence of the probe is suppressed in presence of oxygen free radicals in function of time. The obtained results clearly shows that the hydrogen peroxide when not catalyzed should be kept in contact with the tooth for longer periods of time.