Disparities in asthma prevalence: The influence of sociodemographic and workplace factors

Asthma is a serious and continuing health problem that affects millions of Americans. Our study was conducted in response to this serious health problem and for purposes of addressing the issue of potential health disparities as outlined in Healthy People 2010. Data from sub-populations of subjects who participated in the National Health and Nutrition Examination Survey (NHANES) from 1999-2004 were used to complete the following specific aims: (1) to update nationally-based estimates of the prevalence of current and lifetime (ever) asthma among adults in the United States (U.S.) and describe by gender the relationships between potential risk factors (e.g., sociodemographics and lifestyle) and asthma; (2) to describe demographic characteristics among working adults in the U.S. and update estimates of the prevalence of asthma in this sub-population, stratified by occupation and industry; and 3) to determine the utility of adapting a population-based Job Exposure Matrix (JEM) for classifying workplace exposures to asthmagens. ^ Our findings suggest the prevalence of asthma among U.S. adults is continuing to rise, with women having a higher prevalence of asthma than men. Living below the poverty threshold, obesity, and prior history of smoking remain important determinants of asthma. Our study also adds to the increasing evidence that health care workers (HCWs) and those employed in education remain at high risk and that appropriate evaluation and control measures need to be implemented. Over 78% of HCWs and 71% of teachers in our study were females suggesting that further exploration of gender-specific risk factors of asthma in working populations is needed. ^ Our study also addressed the feasibility of adapting a population-based asthma-specific JEM to NHANES (1999-2004). We were not able to apply the asthma-specific JEM due to the broad occupational categories within NHANES. This represents a missed opportunity to examine the association between workplace exposures and asthma in U.S. working adults. However, we have identified steps that may be implemented in future population-based studies that would allow the asthma-specific JEM (and other population-based job exposure matrices) to be used in future studies of the U.S. working population.^

Determining the feasibility and acceptability of a garden-based nutrition curriculum for preschoolers

Obesity rates around the nation have risen to epidemic proportions. Rates of childhood obesity are at very high levels with 24.4% of preschool-aged children in the U.S. currently considered as overweight or obese. The percentage of childhood obesity is much higher in the southern part of the United States as compared to the rest of the nation. Minority populations, especially African American and Hispanic, are affected more than other ethnic groups. Obesity prevention programs are needed targeting young children <6 years of age from minority populations. Currently, there are few obesity prevention programs that have been implemented and evaluated in children <6 years of age. Gardening programs have been successful in improving the health status of elementary school children by increasing fruit and vegetable intake and increasing preferences for healthier food choices. However, there is no evidence of the feasibility and acceptability of a garden-based obesity prevention program among preschoolers. This pretest study, a classroom-based gardening curriculum program with 16 lesson plans and coordinating activities for preschool age children (3-5 years old) enrolled in Head Start, provides the opportunity to address this need. The study included 103 preschoolers from two centers and 9 teachers or teachers' aides. Qualitative data on feasibility and acceptability was collected from process evaluation forms of individual lesson plans and focus groups with teachers. Teacher questionnaires assessed individual teacher characteristics and provided feedback regarding the curriculum. Quantitative measures of teachers' self-efficacy, attitudes, and knowledge pertaining to nutrition were analyzed from pre and post-test surveys. Results revealed this preschool garden-based nutrition curriculum was both feasible and acceptable. The program improved teacher's self-efficacy, knowledge, and attitudes about nutrition, with teacher's confidence in ability to teach a gardening curriculum increasing from a mean score of 2.14 to 3.00 from pre to post test (P value = 0.0046). These results indicate implementing garden-based nutrition lessons within preschools is achievable. Employing garden-based nutrition lessons in the classroom is the first step in teaching children about nutrition and gardening concepts. Constructing gardening beds for more hands-on learning is the next proposed step in the larger parent study of this program.^

"Innovatio educativa tertio millennio": 12 years evoluting from learning from learning to teaching in courses on educational innovation and collaboration with the UNESCO chair of mining and industrial heritage

Twelve years ago a group of teachers began to work in educational innovation. In 2002 we received an award for educational innovation, undergoing several stages. Recently, we have decided to focus on being teachers of educational innovation. We create a web scheduled in Joomla offering various services, among which we emphasize teaching courses of educational innovation. The “Instituto de Ciencias de la Educacion” in “Universidad Politécnica de Madrid” has recently incorporated two of these courses, which has been highly praised. These courses will be reissued in new calls, and we are going to offer them to more Universities. We are in contact with several institutions, radio programs, the UNESCO Chair of Mining and Industrial Heritage, and we are working with them in the creation of heritage courses using methods that we have developed.

Traditional education vs modern education. What is the impact of teaching techniques' evolution on students learning process?

The main objective of this article is to focus on the analysis of teaching techniques, ranging from the use of the blackboard and chalk in old traditional classes, using slides and overhead projectors in the eighties and use of presentation software in the nineties, to the video, electronic board and network resources nowadays. Furthermore, all the aforementioned, is viewed under the different mentalities in which the teacher conditions the student using the new teaching technique, improving soft skills but maybe leading either to encouragement or disinterest, and including the lack of educational knowledge consolidation at scientific, technology and specific levels. In the same way, we study the process of adaptation required for teachers, the differences in the processes of information transfer and education towards the student, and even the existence of teachers who are not any longer appealed by their work due which has become much simpler due to new technologies and the greater ease in the development of classes due to the criteria described on the new Grade Programs adopted by the European Higher Education Area. Moreover, it is also intended to understand the evolution of students’ profiles, from the eighties to present time, in order to understand certain attitudes, behaviours, accomplishments and acknowledgements acquired over the semesters within the degree Programs. As an Educational Innovation Group, another key question also arises. What will be the learning techniques in the future?. How these evolving matters will affect both positively and negatively on the mentality, attitude, behaviour, learning, achievement of goals and satisfaction levels of all elements involved in universities’ education? Clearly, this evolution from chalk to the electronic board, the three-dimensional view of our works and their sequence, greatly facilitates the understanding and adaptation later on to the business world, but does not answer to the unknowns regarding the knowledge and the full development of achievement’s indicators in basic skills of a degree. This is the underlying question which steers the roots of the presented research.

Control motion approach of a lower limb orthosis to reduce energy consumption

By analysing the dynamic principles of the human gait, an economic gait‐control analysis is performed, and passive elements are included to increase the energy efficiency in the motion control of active orthoses. Traditional orthoses use position patterns from the clinical gait analyses (CGAs) of healthy people, which are then de‐normalized and adjusted to each user. These orthoses maintain a very rigid gait, and their energy cosT is very high, reducing the autonomy of the user. First, to take advantage of the inherent dynamics of the legs, a state machine pattern with different gains in eachstate is applied to reduce the actuator energy consumption. Next, different passive elements, such as springs and brakes in the joints, are analysed to further reduce energy consumption. After an off‐line parameter optimization and a heuristic improvement with genetic algorithms, a reduction in energy consumption of 16.8% is obtained by applying a state machine control pattern, and a reduction of 18.9% is obtained by using passive elements. Finally, by combining both strategies, a more natural gait is obtained, and energy consumption is reduced by 24.6%compared with a pure CGA pattern.

The development of a wind tunnel DAQ system by using Labview tools

This paper presents the experimental three-year learning activity developed by a group of teachers in a wind tunnel facility. The authors, leading a team of students, carried out a project consisting of the design, assembly and testing of a wind tunnel. The project included all stages of the process from its initial specifications to its final quality flow assessments, going through the calculation of each element, and the building of the whole wind tunnel. The group of (final year) students was responsible for the whole wind tunnel project as a part of their bachelor degree project. The paper focuses on the development of wind tunnel data acquisition software. This automatic tool is essential to improve the automation of the data acquisition of the wind tunnel facility systems, in particular for a 6DOF multi-axis force/torque sensor. This work can be considered as a typical example of real engineering practice: a set of specifications that has to be modified due to the constraints imposed throughout the project, in order to obtain the final result

Automated detection and classification of brain injury lesions on structural magnetic resonance imaging

El daño cerebral adquirido (DCA) es un problema social y sanitario grave, de magnitud creciente y de una gran complejidad diagnóstica y terapéutica. Su elevada incidencia, junto con el aumento de la supervivencia de los pacientes, una vez superada la fase aguda, lo convierten también en un problema de alta prevalencia. En concreto, según la Organización Mundial de la Salud (OMS) el DCA estará entre las 10 causas más comunes de discapacidad en el año 2020. La neurorrehabilitación permite mejorar el déficit tanto cognitivo como funcional y aumentar la autonomía de las personas con DCA. Con la incorporación de nuevas soluciones tecnológicas al proceso de neurorrehabilitación se pretende alcanzar un nuevo paradigma donde se puedan diseñar tratamientos que sean intensivos, personalizados, monitorizados y basados en la evidencia. Ya que son estas cuatro características las que aseguran que los tratamientos son eficaces. A diferencia de la mayor parte de las disciplinas médicas, no existen asociaciones de síntomas y signos de la alteración cognitiva que faciliten la orientación terapéutica. Actualmente, los tratamientos de neurorrehabilitación se diseñan en base a los resultados obtenidos en una batería de evaluación neuropsicológica que evalúa el nivel de afectación de cada una de las funciones cognitivas (memoria, atención, funciones ejecutivas, etc.). La línea de investigación en la que se enmarca este trabajo de investigación pretende diseñar y desarrollar un perfil cognitivo basado no sólo en el resultado obtenido en esa batería de test, sino también en información teórica que engloba tanto estructuras anatómicas como relaciones funcionales e información anatómica obtenida de los estudios de imagen. De esta forma, el perfil cognitivo utilizado para diseñar los tratamientos integra información personalizada y basada en la evidencia. Las técnicas de neuroimagen representan una herramienta fundamental en la identificación de lesiones para la generación de estos perfiles cognitivos. La aproximación clásica utilizada en la identificación de lesiones consiste en delinear manualmente regiones anatómicas cerebrales. Esta aproximación presenta diversos problemas relacionados con inconsistencias de criterio entre distintos clínicos, reproducibilidad y tiempo. Por tanto, la automatización de este procedimiento es fundamental para asegurar una extracción objetiva de información. La delineación automática de regiones anatómicas se realiza mediante el registro tanto contra atlas como contra otros estudios de imagen de distintos sujetos. Sin embargo, los cambios patológicos asociados al DCA están siempre asociados a anormalidades de intensidad y/o cambios en la localización de las estructuras. Este hecho provoca que los algoritmos de registro tradicionales basados en intensidad no funcionen correctamente y requieran la intervención del clínico para seleccionar ciertos puntos (que en esta tesis hemos denominado puntos singulares). Además estos algoritmos tampoco permiten que se produzcan deformaciones grandes deslocalizadas. Hecho que también puede ocurrir ante la presencia de lesiones provocadas por un accidente cerebrovascular (ACV) o un traumatismo craneoencefálico (TCE). Esta tesis se centra en el diseño, desarrollo e implementación de una metodología para la detección automática de estructuras lesionadas que integra algoritmos cuyo objetivo principal es generar resultados que puedan ser reproducibles y objetivos. Esta metodología se divide en cuatro etapas: pre-procesado, identificación de puntos singulares, registro y detección de lesiones. Los trabajos y resultados alcanzados en esta tesis son los siguientes: Pre-procesado. En esta primera etapa el objetivo es homogeneizar todos los datos de entrada con el objetivo de poder extraer conclusiones válidas de los resultados obtenidos. Esta etapa, por tanto, tiene un gran impacto en los resultados finales. Se compone de tres operaciones: eliminación del cráneo, normalización en intensidad y normalización espacial. Identificación de puntos singulares. El objetivo de esta etapa es automatizar la identificación de puntos anatómicos (puntos singulares). Esta etapa equivale a la identificación manual de puntos anatómicos por parte del clínico, permitiendo: identificar un mayor número de puntos lo que se traduce en mayor información; eliminar el factor asociado a la variabilidad inter-sujeto, por tanto, los resultados son reproducibles y objetivos; y elimina el tiempo invertido en el marcado manual de puntos. Este trabajo de investigación propone un algoritmo de identificación de puntos singulares (descriptor) basado en una solución multi-detector y que contiene información multi-paramétrica: espacial y asociada a la intensidad. Este algoritmo ha sido contrastado con otros algoritmos similares encontrados en el estado del arte. Registro. En esta etapa se pretenden poner en concordancia espacial dos estudios de imagen de sujetos/pacientes distintos. El algoritmo propuesto en este trabajo de investigación está basado en descriptores y su principal objetivo es el cálculo de un campo vectorial que permita introducir deformaciones deslocalizadas en la imagen (en distintas regiones de la imagen) y tan grandes como indique el vector de deformación asociado. El algoritmo propuesto ha sido comparado con otros algoritmos de registro utilizados en aplicaciones de neuroimagen que se utilizan con estudios de sujetos control. Los resultados obtenidos son prometedores y representan un nuevo contexto para la identificación automática de estructuras. Identificación de lesiones. En esta última etapa se identifican aquellas estructuras cuyas características asociadas a la localización espacial y al área o volumen han sido modificadas con respecto a una situación de normalidad. Para ello se realiza un estudio estadístico del atlas que se vaya a utilizar y se establecen los parámetros estadísticos de normalidad asociados a la localización y al área. En función de las estructuras delineadas en el atlas, se podrán identificar más o menos estructuras anatómicas, siendo nuestra metodología independiente del atlas seleccionado. En general, esta tesis doctoral corrobora las hipótesis de investigación postuladas relativas a la identificación automática de lesiones utilizando estudios de imagen médica estructural, concretamente estudios de resonancia magnética. Basándose en estos cimientos, se han abrir nuevos campos de investigación que contribuyan a la mejora en la detección de lesiones. ABSTRACT Brain injury constitutes a serious social and health problem of increasing magnitude and of great diagnostic and therapeutic complexity. Its high incidence and survival rate, after the initial critical phases, makes it a prevalent problem that needs to be addressed. In particular, according to the World Health Organization (WHO), brain injury will be among the 10 most common causes of disability by 2020. Neurorehabilitation improves both cognitive and functional deficits and increases the autonomy of brain injury patients. The incorporation of new technologies to the neurorehabilitation tries to reach a new paradigm focused on designing intensive, personalized, monitored and evidence-based treatments. Since these four characteristics ensure the effectivity of treatments. Contrary to most medical disciplines, it is not possible to link symptoms and cognitive disorder syndromes, to assist the therapist. Currently, neurorehabilitation treatments are planned considering the results obtained from a neuropsychological assessment battery, which evaluates the functional impairment of each cognitive function (memory, attention, executive functions, etc.). The research line, on which this PhD falls under, aims to design and develop a cognitive profile based not only on the results obtained in the assessment battery, but also on theoretical information that includes both anatomical structures and functional relationships and anatomical information obtained from medical imaging studies, such as magnetic resonance. Therefore, the cognitive profile used to design these treatments integrates information personalized and evidence-based. Neuroimaging techniques represent an essential tool to identify lesions and generate this type of cognitive dysfunctional profiles. Manual delineation of brain anatomical regions is the classical approach to identify brain anatomical regions. Manual approaches present several problems related to inconsistencies across different clinicians, time and repeatability. Automated delineation is done by registering brains to one another or to a template. However, when imaging studies contain lesions, there are several intensity abnormalities and location alterations that reduce the performance of most of the registration algorithms based on intensity parameters. Thus, specialists may have to manually interact with imaging studies to select landmarks (called singular points in this PhD) or identify regions of interest. These two solutions have the same inconvenient than manual approaches, mentioned before. Moreover, these registration algorithms do not allow large and distributed deformations. This type of deformations may also appear when a stroke or a traumatic brain injury (TBI) occur. This PhD is focused on the design, development and implementation of a new methodology to automatically identify lesions in anatomical structures. This methodology integrates algorithms whose main objective is to generate objective and reproducible results. It is divided into four stages: pre-processing, singular points identification, registration and lesion detection. Pre-processing stage. In this first stage, the aim is to standardize all input data in order to be able to draw valid conclusions from the results. Therefore, this stage has a direct impact on the final results. It consists of three steps: skull-stripping, spatial and intensity normalization. Singular points identification. This stage aims to automatize the identification of anatomical points (singular points). It involves the manual identification of anatomical points by the clinician. This automatic identification allows to identify a greater number of points which results in more information; to remove the factor associated to inter-subject variability and thus, the results are reproducible and objective; and to eliminate the time spent on manual marking. This PhD proposed an algorithm to automatically identify singular points (descriptor) based on a multi-detector approach. This algorithm contains multi-parametric (spatial and intensity) information. This algorithm has been compared with other similar algorithms found on the state of the art. Registration. The goal of this stage is to put in spatial correspondence two imaging studies of different subjects/patients. The algorithm proposed in this PhD is based on descriptors. Its main objective is to compute a vector field to introduce distributed deformations (changes in different imaging regions), as large as the deformation vector indicates. The proposed algorithm has been compared with other registration algorithms used on different neuroimaging applications which are used with control subjects. The obtained results are promising and they represent a new context for the automatic identification of anatomical structures. Lesion identification. This final stage aims to identify those anatomical structures whose characteristics associated to spatial location and area or volume has been modified with respect to a normal state. A statistical study of the atlas to be used is performed to establish which are the statistical parameters associated to the normal state. The anatomical structures that may be identified depend on the selected anatomical structures identified on the atlas. The proposed methodology is independent from the selected atlas. Overall, this PhD corroborates the investigated research hypotheses regarding the automatic identification of lesions based on structural medical imaging studies (resonance magnetic studies). Based on these foundations, new research fields to improve the automatic identification of lesions in brain injury can be proposed.

A SENSIBILIDADE DO OLHAR MULTIRREFERENCIAL ABRINDO CAMINHOS EM DIREÇÃO AO AUTOR-CIDADÃO

O estudo pretende debater a idéia de sujeito a partir do cruzamento das idéias de autonomia, autoria e autor-cidadão como eixo teórico para, a partir da abordagem multirreferencial, indagar sobre de que maneiras é possível contribuir para a formação de sujeitos autônomos considerando a prática em uma universidade privada confessional. O sujeito aqui é apresentado não na perspectiva de um corpo biológico e físico, mas como projeto, considerando a historicidade, sociabilidade e, também, a questão da psique do ser humano. O objetivo do trabalho é analisar a formação do sujeito tendo em vista a proposta pedagógica da UMESP UNIVERSIDADE METODISTA DE SÃO PAULO. Esta opção justifica-se essencialmente pelo fato da escola apresentar uma proposta educacional diferenciada, que visa a formação cidadã. Os conceitos de instituição e autonomia são de extrema relevância para analisar no contexto da pesquisa proposta as representações e as práticas legítimas, bem como a necessidade de ressignificação da idéia de cidadania, diante das exigências da vida contemporânea. Trata-se, portanto, de uma pesquisa qualitativa de cunho exploratório. Quanto aos procedimentos metodológicos foi realizada a observação participante e com a aplicação de um roteiro qualificado buscou-se ouvir alunos da comunidade acadêmica. Foi possível perceber claramente as intenções ligadas à confessionalidade retratadas no Projeto Pedagógico da UMESP. Quanto às intenções dos alunos, observou-se a preocupação com a formação profissional. Tendo em vista nosso entendimento a respeito do exercício da cidadania a partir da autonomia do sujeito, estendemos nosso olhar para todos os atores sociais envolvidos. Observamos que é possível realizar um trabalho em direção ao autorcidadão porque o aluno, em geral, está aberto a transformar-se. A questão é relacional. Tem a ver de fato com a maneira como o ensino acontece. Professores e alunos devem encontrar-se como sujeitos em permanente construção, implicados. A educação pode desenvolver pessoas críticas e autônomas, sujeitos autores de suas próprias vidas atuando de acordo com seus desejos e conscientes de suas reais necessidades e responsabilidades.(AU)

A SENSIBILIDADE DO OLHAR MULTIRREFERENCIAL ABRINDO CAMINHOS EM DIREÇÃO AO AUTOR-CIDADÃO

O estudo pretende debater a idéia de sujeito a partir do cruzamento das idéias de autonomia, autoria e autor-cidadão como eixo teórico para, a partir da abordagem multirreferencial, indagar sobre de que maneiras é possível contribuir para a formação de sujeitos autônomos considerando a prática em uma universidade privada confessional. O sujeito aqui é apresentado não na perspectiva de um corpo biológico e físico, mas como projeto, considerando a historicidade, sociabilidade e, também, a questão da psique do ser humano. O objetivo do trabalho é analisar a formação do sujeito tendo em vista a proposta pedagógica da UMESP UNIVERSIDADE METODISTA DE SÃO PAULO. Esta opção justifica-se essencialmente pelo fato da escola apresentar uma proposta educacional diferenciada, que visa a formação cidadã. Os conceitos de instituição e autonomia são de extrema relevância para analisar no contexto da pesquisa proposta as representações e as práticas legítimas, bem como a necessidade de ressignificação da idéia de cidadania, diante das exigências da vida contemporânea. Trata-se, portanto, de uma pesquisa qualitativa de cunho exploratório. Quanto aos procedimentos metodológicos foi realizada a observação participante e com a aplicação de um roteiro qualificado buscou-se ouvir alunos da comunidade acadêmica. Foi possível perceber claramente as intenções ligadas à confessionalidade retratadas no Projeto Pedagógico da UMESP. Quanto às intenções dos alunos, observou-se a preocupação com a formação profissional. Tendo em vista nosso entendimento a respeito do exercício da cidadania a partir da autonomia do sujeito, estendemos nosso olhar para todos os atores sociais envolvidos. Observamos que é possível realizar um trabalho em direção ao autorcidadão porque o aluno, em geral, está aberto a transformar-se. A questão é relacional. Tem a ver de fato com a maneira como o ensino acontece. Professores e alunos devem encontrar-se como sujeitos em permanente construção, implicados. A educação pode desenvolver pessoas críticas e autônomas, sujeitos autores de suas próprias vidas atuando de acordo com seus desejos e conscientes de suas reais necessidades e responsabilidades.(AU)

Timing of metamorphosis and the onset of the negative feedback loop between the thyroid gland and the pituitary is controlled by type II iodothyronine deiodinase in Xenopus laevis

Two important features of amphibian metamorphosis are the sequential response of tissues to different concentrations of thyroid hormone (TH) and the development of the negative feedback loop between the pituitary and the thyroid gland that regulates TH synthesis by the thyroid gland. At the climax of metamorphosis in Xenopus laevis (when the TH level is highest), the ratio of the circulating precursor thyroxine (T4) to the active form 3,5,3′-triiodothyronine (T3) in the blood is many times higher than it is in tissues. This difference is because of the conversion of T4 to T3 in target cells of the tadpole catalyzed by the enzyme type II iodothyronine deiodinase (D2) and the local effect (cell autonomy) of this activity. Limb buds and tails express D2 early and late in metamorphosis, respectively, correlating with the time that these organs undergo TH-induced change. T3 is required to complete metamorphosis because the peak concentration of T4 that is reached at metamorphic climax cannot induce the final morphological changes. At the climax of metamorphosis, D2 expression is activated specifically in the anterior pituitary cells that express the genes for thyroid-stimulating hormone but not in the cells that express proopiomelanocortin. Physiological concentrations of T3 but not T4 can suppress thyrotropin subunit β gene expression. The timing and the remarkable specificity of D2 expression in the thyrotrophs of the anterior pituitary coupled with the requirement for locally synthesized T3 strongly support a role for D2 in the onset of the negative feedback loop at the climax of metamorphosis.

Crossing Blurred Lines: A Training Program to Train Teachers in Appropriate Sexual Boundaries

Boundaries between students and teachers were once clearly defined. Students only interacted with their teachers at school. Currently, however, boundaries are becoming increasingly unclear. As technology advances, students have more venues to interact with their teachers. In addition, teachers are asked to take on more roles in their students' lives. A significant number of teachers and students engage in inappropriate relationships and the possible damage to students is high. Unfortunately, current training programs do not adequately address how teachers can maintain appropriate boundaries with their charges. This paper outlines a proposal for a new training program to fill this gap. This program utilizes training techniques that have been shown to be useful for adult learners as it helps teachers establish and maintain boundaries as well as incorporating elements of effective prevention programs.

Autonomia docente: trajetórias e desafios na implementação de um projeto interdisciplinar

As exigências atuais em relação ao professor se estabelecem em torno de sua capacidade e sensibilidade de construir, planejar e gerir um currículo capaz de formar um cidadão em condições de, além de tomar atitudes socialmente responsáveis, também consiga produzir mudanças em busca de soluções para problemas que enfrentam em seu cotidiano. Espera-se, portanto, que o professor desenvolva, planeje e elabore projetos educacionais. No entanto, as pesquisas mostram que a maioria dos professores nem sempre está em condições de implementar, executar e gerir tais projetos e, de forma geral, reproduz o ensino que teve nas experiências que vivenciou enquanto aluno. Em nossa pesquisa, buscaremos investigar a trajetória percorrida por dois professores de Física, participantes de um grupo de professores que buscaram pôr em prática um projeto de caráter interdisciplinar, visando compreender como o resgate da dimensão intelectual docente pode ou não contribuir para o desenvolvimento da autonomia profissional do professor de Ciências. Nossa pesquisa parte da hipótese de que muitas das dificuldades enfrentadas pelos professores relacionam-se com a identidade docente de cada professor, bem como suas concepções acerca do exercício de sua autonomia profissional. Assim sendo, escolhemos adotar a modalidade de pesquisa qualitativa denominada estudo de caso, por estarmos mais interessados na identificação de aspectos próprios da realidade docente e do âmbito escolar que interferem decisivamente na maneira como o ensino é praticado, para, assim, analisar como os aspectos intrapessoais, interpessoais e institucionais dos professores interferiram na execução do projeto; caracterizar a autonomia dos docentes de física e analisar se a mesma se desenvolveu ao longo da trajetória do resgate intelectual do ofício de professor. Portanto, na metodologia de coleta de dados, a pesquisa se constituirá de três fases: o planejamento, a tomada de decisão e a análise que os professores fazem das medidas pedagógicas adotadas. Para análise, utilizaremos os referenciais que estudam a autonomia docente relacionando-a com a identidade profissional do professor, fixando nossas atenções, principalmente, nos processos reflexivos a partir do estabelecimento do quádruplo diálogo e do desenvolvimento da alteridade.

Lecciones aprendidas gamificando cuando aún no se llamaba gamificación

El término gamificación está de moda. Los gurús la sitúan como una tecnología emergente y disruptiva, que cambiará muchas de nuestras experiencias en campos tan alejados de los juegos como el empresarial, el marketing y la relación con los clientes. Y el entorno educativo no escapará a ello. En este artículo presentamos la experiencia de un grupo de profesores preocupados por la docencia, que llevamos años experimentando con los videojuegos y las experiencias lúdicas, y que de repente nos hemos encontrado con el término gamificación. Estas son las lecciones que hemos aprendido, que podemos enmarcar en el campo de la gamificación en educación, pero que derivan de una experiencia práctica, de un análisis desmenuzado y de una reflexión concienzuda. Pretendemos mostrar qué es lo realmente importante y qué puntos debemos tener en cuenta los profesores antes de lanzarnos al diseño gamificado de nuestra propuesta docente.

Efficient taxation of multi-national enterprises in the European Union. Bruges European Economic Policy (BEEP) Briefing 5/2003

Current arrangements for multi-national company taxation in EU are plagued by severe conceptual and administrative problems, leading to high compliance costs, considerable uncertainty and ample room for abuse. Integration is amplifying these difficulties. There are two possible approaches in designing an efficient trans-border corporate tax system for the European Union. The first is to consolidate the EU-wide operations of MNEs, using an agreed common base as the reference variable, and then to apportion this total tax base using some presumptive indicators of activity in each tax jurisdiction – hence, implicitly, of the likely benefits stemming from each location. The apportionment formula should respect requisites of neutrality between productive factors and forms of corporate financing. A radically different approach is also available that offers considerable advantages in terms of efficiency, simplicity and decentralisation, including full administrative autonomy of national tax authorities. It entails abandoning corporate income as the relevant tax base and taxing at a moderate rate some agreed measure of business activity such as company value added, sales or employment. These are the variables usually considered in formula apportionment, but they would apply directly without having first to go through the complications of EU-wide consolidation based on a common-base definition. Reference to a broad base, with no exemptions or deductions, would allow to set low statutory rates.