High pressure compression of filter cakes

The purpose of this thesis was to investigate the compression of filter cakes at high filtration pressures with five different test materials and to compare the energy consumption of high pressure compression with the energy consumption of thermal drying. The secondary target of this study was to investigate the particle deformation of test materials during filtration and compression. Literature part consists of basic theory of filtration and compression and of the basic parameters that influence the filtration process. There is also a brief description about all of the test materials including their properties and their industrial production and processing. Theoretical equations for calculating the energy consumptions of the filtrations at different conditions are also presented. At the beginning of the experiments at experimental part, the basic filtration tests were done with all the five test materials. Filtration tests were made at eight different pressures, from 6 bars up to 100 bars, by using piston press pressure filter. Filtration tests were then repeated by using a cylinder with smaller slurry volume than in the first series of filtration tests. Separate filtration tests were also done for investigating the deformation of solid particles during filtration and for finding the optimal curve for raising the filtration pressure. Energy consumption differences between high pressure filtration and ideal thermal drying process were done partly experimentally and partly by using theoretical calculation equations. By comparing these two water removal methods, the optimal ranges for their use were found considering their energy efficiency. The results of the measurements shows that the filtration rate increased and the moisture content of the filter cakes decreased as the filtration pressure was increased. Also the porosity of the filter cakes mainly decreased when the filtration pressure was increased. Particle deformation during the filtration was observed only with coal particles.

Estudo da sorção do corante catiônico violeta cristal por espuma de poliuretano em meio aquoso contendo dodecilsulfato de sódio

This work presents a detailed study about the sorption of crystal violet (CV) cationic dye onto polyether type polyurethane foam (PUF). The sorption process was based on the formation of an ionic-pair between cationic dye and dodecylsulfate anion (SDS), which presented high affinity by PUF. Set-up employed in the study was built up by adjusting a 200 mg cylinder of PUF to the arm of an overhead stirrer. The system was characterized in relation to equilibrium and kinetic aspects and it was modeled by employing Langmuir and Freundlich isotherms. Obtained results showed that the ratio between SDS and MB concentrations played an important role on the sorption process. According to results found it was possible to retain up to 3.4 mg of dye from 200 mL of a 5.0 x 10-5 mol L-1 CV solution containing 1.25 x 10-4 mol L-1 SDS, which represented a removal efficiency of around 92%.

Dewatering of hard-to-dewater pulps

Nanocellulose has much potential for enhancing the tensile strength of paper but it slows down significantly drainage, restricting its use in industrial scale. Main objective of the work was to find ways to improve the dewatering of nanocellulose-containing papers. The effects of cationic potato starch, microparticle system and filler addition on dewatering and such key properties as formation, tensile strength and air permeance of manufactured paper were studied. Test points had 0, 4 or 8 % CNF and 0, 15 or 30 % PCC content. Based on earlier studies, 25 mg/g starch dosage was added to some test points. Modern microparticle system, consisted of cationic polyacrylamide and amorphous silica, was used in few test points. Dosages for both components were 0.3 and 0.6 mg/g, following the recommendations of the supplier. Also, the influences of CNF and filler on drying behaviour after different stages (drainage, wet pressing and cylinder drying) were estimated. Following trends were observed. Starch does not have unambiguous influence on dewatering. In some cases, it improved drainage slightly but effects on the properties of end product were discovered small. Filler quickened dewatering but large proportions were noticed to be detrimental for the drainage, air permeance and tensile strength. Microparticle system improved drainage notably, especially if CNF dosage was high. In addition, microparticle system increased tensile strength and decreased air permeance. However, its effects on formation were detrimental. Dewatering of nanocellulose-containing furnishes is treatable up to a certain point. In the end, such drainage times that were measured from test points which consisted only of pure kraft pulps are awkward to reach.

Suitability of foam coating on application of thin liquid films

This work aimed to find out the suitability of foam as medium in application of thin liquid films. This consists of research over phenomena related to foam physics and behaviour. Solutions and mixtures to be foamed, foaming agents, foam generation and application methods were evaluated. Over the evaluated solutions and mixtures coating paste and CMC did not foam well. Latex and PVA solutions were foamable and the best solution for foam use was starch. PVA and casein can be used as foaming agents, but the best results were achieved with sodium dodecyl sulphate (SDS). SDS works well with starch solutions producing fine and stable foam. Foaming was done with simple mixers where pressurized air was fed to the solution. The foaming works fine when enough shear force is used together with sufficient foaming agent concentration. Foam application with curtain, rod and cylinder methods with a gap between the application device and paper were not usable because of high coating amount. Coating amounts were smallest with the blade method which achieved 0.9 g/m2 starch layer. Although some strength decrease was expected because of the foaming agent, it dit not have significant effect. The targeted coating amount of 0.5 g/m2 was not achieved due to the limitations with the methods. More precise foam application methods are needed. Continuous foam generation and feed to the paper surface with controllable device such as application teeth could improve the results.

Images of imagination : an aesthetic approach to education

Visual art practice has generally been described as a lonely affair, thinking about what an artist has experienced in the outside world. This study is an inquiry into a visual art practice of another kind: the relational one. The research purpose is twofold. The first purpose is to shed light on a visual artist’s conceptions of art, education and scholarship. The second purpose is to by reasoning on imagination and a rhizomatic formation interpret the relations created between art, multimodality and literacy learning as an aesthetic approach to education. By inquiry into a specific collaborated long-term art practice, the study conveys how the meaning making elements of an arts based learning practice gradually transform an artist’s and a teacher’s concepts of art education to an aesthetic approach to education. In the art practice examined the typical Finnish rye bread and a poem have represented a cultural theme that has been elaborated through art conventions. The poem and the rye bread have in the art practice been articulated as cultural representations of as well as symbolic projections on the Swedishspeaking minority culture in Finland. The study connects art informed inquiry to a hermeneutic research rationale where the research reasoning is generated through a rhizomatic alliance between empiric data and theories. The reasoning is constructed as an interpretation pattern that expands throughout the study. The study arguments that the rhizome as an aesthetic formation can be appropriate to refer to when articulating arts based meaning making and when creating arts based educational strategies, dialogues, aesthetic learning and multimodal literacy in education. The study investigates an aesthetic approach to research in education, which means that the art practice surveyed is interpreted through articulation appropriate to poetic aspects of art, education and research.

Lyssnande : en vårdvetenskaplig betraktelse

Denna vårdvetenskapliga studie har sökarljuset riktat mot lyssnande som något fundamentalt för människan. Studiens syfte är att utifrån forskarens traditionstillhörighet och en klart uttalad teorikärna, värdegrund, ontologisk grund samt en hermeneutisk ansats avtäcka nytt inseende om vad lyssnande är samt vad som är vårdande i lyssnande. Studiens avsikt är att bringa ontologisk klarhet, klargöra lyssnandets plats inom vårdvetenskaplig teoribildning samt bidra med bilder av det vårdande med relevans för klinisk praxis. Det hermeneutiska arbetssättet är en ständig rörelse mellan det enskilda och gemensamma. Den vårdvetenskapliga traditionens grundläggande ordning utgör siktet för kunskapssökandet samtidigt som det är gentemot den caritativa vårdteorin som nytt inseende ur historiska källor reflekteras för att lysa upp och synliggöra det evidenta och ursprungliga om lyssnande. Begreppsutredningen av lyssna som begrepp ger förståelse för begreppets historiska ursprung och dess starka band med begreppen lyss, lystra, lyda, följa, iaktta, se samt lust, begär, böjelse och glädje. Läsning och begrundan av filosoferna Bubers, Lévinas och författaren Dostojevskijs livsverk avtäcker vittnesbörd och stillbilder som tolkas för att synliggöra tolkningsantaganden om lyssnandets väsen och gestaltning. Jag har läst och begrundat texterna med öppenhet, lyhördhet och en kvardröjande hållning för att låta dem beröra, tilltala mig och framträda som något nytt. Ur de enskilda texterna avtäcks mönster av en gemensam inre ordning och en gemensam stillbild och tolkningsantaganden om lyssnande formas. När den gemensamma inre ordningen får sammanstråla med studiens vårdvetenskapliga grund synliggörs en urbild och teser om lyssnande samt det vårdande i lyssnande. Avtäckandet visar att lyssnande är en grundhållning till livet självt. Människan lyssnar till sitt innersta väsen för att tillägna sig en inre grundordning samt hörsamma sin tillhörighet i en mera allomfattande gemenskap till den skapande, den andre och det oändliga. I ljuset av kärlekens kraft och bejakandet av mänskligt lidande kan ensamhet och gemenskap sluta förbund med varandra i en mellanverklighet som bär oändlighetens och evighetens kännetecken, och som får toner av det heliga och eviga att ljuda i allt och alla i en närvaro här och nu. Lyssnande är en väsenshandling som uttalas genom en vårdande hållning att tjäna, offra och bära ansvar för den andre med medmänsklig barmhärtighet och medmänskligt medlidande. Band till den andre knyts genom den egna sårbarheten och genom att med ödmjukhet, äkthet och gästfrihet bjuda in och välkomna den andre i sin annanhet. Den vårdande gemenskapen skapar en rörelse som bär på en livsbringande kraft genom vilken människan uppnår frihet att varda, finna näring och försoning.

Impersonal trust within the organization: what, how and why?

It has been shown in organizational settings that trust is a crucial factor in different kinds of outcomes, and consequently, building employee trust in the employer is a goal for all kinds of organizations. Although it is recognized that trust in organizations operates on multiple levels, at present there is no clear consensus on the concept of trust within the organization. One can have trust in particular people (i.e. interpersonal trust) or in organized systems (i.e. impersonal trust). Until recently organizational trust has been treated mainly as an interpersonal phenomenon. However, the interpersonal approach is limited. Scholars studying organizational trust have thus far focused only on specific dimensions of impersonal trust, and none have taken a comprehensive approach. The first objective in this study was to develop a construct and a scale encompassing the impersonal element of organizational trust. The second objective was to examine the effects of various HRM practices on the impersonal dimensions of organizational trust. Moreover, although the “black box” model of HRM is widely studied, there have been only a few attempts to unlock the box. Previous studies on the HRM-performance link refer to trust, and this work contributes to the literature in considering trust an impersonal issue in the relationship between HRM, trust, and performance. The third objective was thus to clarify the role of impersonal trust in the relationship between HRM and performance. The study is divided into two parts comprising the Introduction and four separate publications. Each publication addresses a distinct sub-question, whereas the Introduction discusses the overall results in the light of the individual sub-questions. The study makes two major contributions to the research on trust. Firstly, it offers a framework describing the construct of impersonal trust, which to date has not been clearly articulated in the research on organizational trust. Secondly, a comprehensive, psychometrically sound, operationally valid scale for measuring impersonal trust was developed. In addition, the study makes an empirical contribution to the research on strategic HRM. First, it shows that HRM practices affect impersonal trust and the contribution is to consider the HRM-trust link in terms of impersonal organizational trust. It is shown that each of the six HRM practices in focus is connected to impersonal trust. A further contribution lies in unlocking the black box. The study explores the impersonal element of organizational trust and its mediating role between HRM practices and performance. The result is the identification of the path by which HRM contributes to performance through the mediator of impersonal trust. It is shown that the effect on performance of HRM designed specifically to enhance employees’ impersonal trust in the organization is positive.

Animal Lovers, Bridge-Builders, and Supervising Watchdogs: Framing and Civil Society Construction by Japanese Pro-Animal Organizations in the Kansai and Tokyo Areas

Unlike their counterparts in Europe and America, the citizen organizations acting for the well-being of animals in Japan have not received scholarly attention. In this research, I explore the activities of twelve Japanese pro-animal organizations in Tokyo and Kansai area from the perspective of social movement and civil society studies. The concept of a ‘pro-animal organization’ is used to refer generally to the collectives promoting animal well-being. By using the collective action frame analysis and the three core framing tasks – diagnostic, prognostic, and motivational – as the primarily analytical tools, I explore the grievances, tactics, motivational means, constructions of agency and identity as well as framing of civil society articulated in the newsletters and the interviews of the twelve organizations I interviewed in Japan in 2010. As the frame construction is always done in relation to the social and political context, I study how the organizations construct their roles as civil society actors in relation to other actors, such as the state, and the idea of citizen activism. The deficiencies in the animal welfare law and lack of knowledge among the public are identified as the main grievances. The primary tactic to overcome these problems was to educate and inform the citizens and authorities, because most organizations lack the channels to influence politically. The audiences were mostly portrayed as either ignorant bystanders or potential adherents. In order to motivate people to join their cause and to enforce the motivation within the organization, the organizations emphasized their uniqueness, proved their efficiency, claimed credit and celebrated even small improvements. The organizations tended to create three different roles for citizen pro-organizations in civil society: reactive, apolitical and emphatic animal lovers concentrating on saving individual animals, proactive, educative bridge-builders seeking to establish equal collaborative relations with authorities, and corrective, supervising watchdogs demanding change in delinquencies offending animal rights. Based on the results of this research, I suggest that by studying how and why the different relations between civil society and the governing actors of the state are constructed, a more versatile approach to citizens’ activism in its context can be achieved.

Rheological behavior of mixed drink of annona and milk

In this study the rheological behavior in different temperatures (0; 6; 18 e 24 ºC) and physicochemical parameters of integral annona (Annona squamosa) pulp and the annona pulp with milk in different percentages pulp/milk (75g of annona pulp/25g of milk, 50g of annona pulp/50g of milk, 25g of annona pulp/75g of milk) have been availed, in order to verify the effect of temperature and pulp concentration in the rheological behavior of these beverages. To obtain the rheological parameters a concentric cylinder rheometer has been used and the rheograms were analyzed using the Ostwald-de-Wael (power Law) and Herschel-Bulkley models. The physicochemical parameters (sugars, pH, ash, acidity and soluble solids) were determined in order to establish correlations with the rheological behavior. Finally, the best results had been obtained using the Herschel-Bulkley model; the low values for the behavior index (n <1) obtained confirm the pseudoplastic behavior of all samples.

Effective diffusivity and convective mass transfer coefficient during the drying of bananas

In this article, a methodology is used for the simultaneous determination of the effective diffusivity and the convective mass transfer coefficient in porous solids, which can be considered as an infinite cylinder during drying. Two models are used for optimization and drying simulation: model 1 (constant volume and diffusivity, with equilibrium boundary condition), and model 2 (constant volume and diffusivity with convective boundary condition). Optimization algorithms based on the inverse method were coupled to the analytical solutions, and these solutions can be adjusted to experimental data of the drying kinetics. An application of optimization methodology was made to describe the drying kinetics of whole bananas, using experimental data available in the literature. The statistical indicators enable to affirm that the solution of diffusion equation with convective boundary condition generates results superior than those with the equilibrium boundary condition.

Effect of adjuvants on the amount of air included in droplets generated by spray nozzles

The air included in droplets generated by spray nozzles directly int0erferes in transport, deposition and retention of the droplets after its impact on the target. The objective of this study was to analyze the interference of adjuvants in the amount of air included in droplets generated by spray nozzles. The treatments were composed by four spray solutions containing mineral oil, vegetable oil, surfactant and water, and three spray nozzles, two air induction type and one pre-orifice. The air included was calculated by the difference between the volume of spray mix (air plus liquid) and only the liquid, which was made by means of sprayed samples captured in a funnel and collected in a graduated cylinder. The surface tension was estimated by the gravimetric method using a precision scale and a graduated pipette. The surfactant provided the largest percentage of air included in the spray. For the surface tension, the mineral oil and the surfactant had the lowest values. It was concluded that the use of adjuvants had a direct influence on the percentage of air included. In addition, products with greater ability to reduce surface tension and to form homogeneous solutions provided the increase in the percentage of air included in the droplet.

Portable flow board for storage of fruits and vegetables in mini-chambers with controlled atmosphere

ABSTRACT A portable flow board system was developed in the present study with the aim to facilitate lab-scale experiments of controlled atmosphere (CA) with fruits and vegetables. This sturdy flow board combines ease fabrication, low cost and gas economy. Its functionality is provided by manifolds and gas mixers. Each gaseous component is supplied by a gas cylinder through a differential valve of adjusted pressure control, generally at 6 kPa, and forced through 13 standardized restrictors coupled to each manifold output. Controlled atmospheres are then formed with one, two or three gases in 13 gas mixers affixed to the flow board base, which are further conducted through flexible tubes to storage mini-chambers that can also be used to study metabolic consumption and production of gaseous components. The restrictors used in the flow gaseous components were manufactured from microhematocrit test-type capillary glass tubes following the hot forming method under continuous air flow. The portable flow board showed to be low cost and simple post-harvest equipment that allows preparing controlled atmospheres in open systems with stable composition and flow, in a manner similar to traditional flow boards with control of gas escape by barostats.

Verorikokset, erityisesti silmällä pitäen törkeää veropetosta

Tutkimusongelmana tutkimuksessani on törkeys veropetoksissa ja keskeisenä tavoitteenani on selvittää niitä edellytyksiä, jotka on asetettu rikoslain 29 luvun 2 §:ssä mainitun rikoksen tekomuodon tunnusmerkistön täyttymisen edellytykseksi. Veropetossäännös on ollut rikoslaissa jo vuodesta 1889, mutta veropetoksen törkeästä muodosta on säännös ollut vasta vuodesta 1972. Veropetoksen tekomuotoja ovat väärän tiedon antaminen, tiedon salaaminen, verotusta varten säädetyn velvollisuuden laiminlyönti eli passiivinen veropetos ja muu petollisuus. Veropetos katsotaan törkeäksi, jos veropetoksessa on tavoiteltu huomattavaa taloudellista hyötyä, rikos on tehty erityisen suunnitelmallisesti ja veropetos on kokonaisuutena arvostellen ollut törkeä. Tutkimukseni on talousoikeudellinen, joka sijoittuu vero- ja rikosoikeuden alalle. Tutkielman tutkimusote on oikeusdogmaattinen, jolloin tutkimuksessa hyödynnetään lainopillista menetelmää. Tutkimusainesto, jonka avulla tutkimusongelmaan etsitään vastausta, koostuu oikeuskirjallisuudesta, lainsäädännöstä, lainvalmisteluaineistosta sekä oikeuskäytännöstä, tarkemmin Korkeimman oikeuden oikeustapauksista 2000-2011 väliseltä ajalta.

Intra-organizational knowledge transfer in a Finnish multinational company

The ability of a multinational company to effectively transfer knowledge from one unit to another can create a great source of competitive advantage and is crucial for long-term success. However, in their attempts to disseminate existent knowledge across national boundaries, organizations encounter several obstacles. Especially challenging is the transfer of tacit knowledge, the most valuable kind, as it is embedded in the minds and the behavior of people. The purpose of this study is to identify the main factors and challenges to be considered in intra-organizational knowledge transfer and consequently develop a framework that could be utilized to improve the process. The research is of qualitative nature and it adopts an exploratory approach. The study was further conducted as an intensive single-case study through studying a Finnish multinational company, and the researcher adopted a role as a participant observant in the research setting. Other data collection methods include semi-structured interviews and an online survey. The research findings show that knowledge transfer is currently challenging within the international sales organization of the case company. The majority of knowledge is currently concentrated in the company headquarters, and it is not always systematically distributed to the regional offices abroad. The main factor affecting knowledge transfer seems to be the organizational culture, which does not support or encourage knowledge sharing. The company is struggling in having a common place for information and employees that lack proper social networks have difficulties accessing relevant knowledge. Some recommended improvement suggestions include the institutionalization of knowledge transfer by turning it into an articulated organizational goal, and the implementation of a reward system that includes soft factors, such as teamwork and knowledge sharing behavior. Furthermore, the organizational culture should be more open and supportive in order to reinforce trust. Individuals in regional offices should be given better support by offering them dedicated mentors and increasing the amount of expatriation. Finally, knowledge should actively be codified and stored in commonly shared platforms where it is easily accessible by all employees.

Pallomaisen rullalaakerin vauriotutkimus kartonkikoneen kiertoöljyvoidellulla kuivatusosalla

Tämä työ on tehty Stora Enson Imatran kartonkitehtaan kunnossapidosta vastaavalle Efora Oy:lle. Tavoitteena oli selvittää syy Imatran Kartonkikone 5:n kuivatussylinterien laakerivaurioiden suureen määrään verrattuna tehtaiden kolmeen muuhun kartonkikoneeseen. Tutkimuksissa keskityttiin laakerien käyttöolosuhteisiin. Syyn selvittämiseksi työssä vertailtiin eri kartonkikoneiden kiertoöljyvoitelujärjestelmiä, voiteluöljyjä, voiteluolosuhteita, öljyjen kuntoa ja kunnon seurantaa. Myös laakereihin kohdistuvia kuormia arvioitiin. Alan kirjallisuuden avulla on käyty läpi kartonkikoneen rakennetta ja toimintaa tarvittavassa laajuudessa, voitelun ja laakerin vaurioitumisen teoriaa sekä voiteluaineiden ominaisuuksien ja koostumuksen perusteita. Vertailevissa tutkimuksissa ei löytynyt vauriomäärien eroja selittäviä eroavaisuuksia Imatran tehtaiden eri kartonkikoneiden välillä, joskin Kartonkikone 5:n kiertovoiteluöljyn puhtaustaso oli muita Imatran kartonkikoneita heikompi. Laakerikuormien osalta havaittiin joidenkin laakerien käyvän laakerille asetetun vähimmäiskuorman alittavilla kuormituksilla. Vähimmäiskuormaa pienempi radiaalikuorma voi johtaa laakerin virheelliseen toimintaan ja edelleen vaurioitumiseen. Voiteluolosuhteet todettiin erittäin vaikeiksi ja niillä on epäilemättä vaikutusta voiteluöljyn ja laakerien lyhentyneeseen käyttöikään.