Effect of glass substrate and deposition technique on the properties of sol gel TiO2 thin films

Na+ ions have a detrimental effect on the photocatalytic activity of thin sot gel films deposited on soda lime glass due to their diffusion into the film during the calcination process. Given that the content of sodium in glass substrate might be the crucial parameter in determining the activity of a photocatalyst, the aim of the present work was the comparison of the photoinduced properties of a thin TiO2 film prepared on three different glass substrates namely on quartz (Q) glass, borosilicate (BS) glass and soda lime (SL) glass which have different sodium content. The prepared layers were characterised by X-ray diffraction and UV-vis spectroscopy. The diffusion of Na+ from the substrate into the layers was determined by Glow Discharge Atomic Emission Spectroscopy. The photocatalytic activities of the films were assessed using two model pollutant test systems (resazurin/resorufin ink and stearic acid film), which appeared to correlate reasonably well. It was observed that TiO2 layer on SL glass has a brookite crystalline structure while the TiO2 layer on BS and Q glass has an anatase crystalline structure. On the other hand, the photodegradation of the model dye on TiO2 films deposited on Q and BS glass is about an order higher than on SL glass. The low sodium content of BS glass makes it the most suitable substrate for the deposition of photoactive sol gel TiO2 films. (C) 2011 Elsevier B.V. All rights reserved.

Preparation and characterisation of novel thick sol-gel titania film photocatalysts

The preparation and characterization of thick (9 mum), clear, mechanically robust and photocatalytically active films of nanocrystalline anatase titania are described. XRD and SEM analysis show the films comprise 13 nm particles of anatase TiO2. Thin (54 nm) films of the 'paste' TiO2, along with sol-gel titania films made by a more traditional route are also prepared and characterised. All titania films mediate the photocatalytic destruction of stearic acid with a quantum yield of 0.0016 +/- 0.0003. using either 365 nm (i.e. BLB) or 254 nm (germicidal) light. P25 TiO2 films also appear to mediate the same process with a similar formal quantum efficiency. Of all the films tested, the thick paste TiO2 films are the most ideally suited for use with near UV light, for reasons which are discussed. All the titania films tested exhibit photoinduced superhydrophilicity.

Focus group interviews:a guide for palliative care researchers and clinicians

The focus group interview is an increasingly common qualitative research method used by health professionals. General approaches to conducting focus groups have been published. There has, however, been minimal exploration of issues regarding the use of focus groups with palliative care populations and data analysis procedures have been underreported. The aim of this paper is to provide a guide for conducting focus groups drawing on palliative care examples. A succinct outline of why, when and how to use focus groups is offered. Key ethical and practical issues are explored as well as considerations for data analysis. This guide offers researchers and clinicians fundamental strategies for the use of focus groups within the palliative care context.

Structural and magnetic properties of Ni1-xZnxFe2O4 (x=0, 0.5 and 1) nanopowders prepared by sol-gel method

A series of nanostructured Ni-Zn ferrites Ni1-xZnxFe2O4 (x=0, 0.5 and 1) with a grain size from 24 to 65 nm have been prepared with a sol-gel method. The effect of composition and sintering temperature on morphology, magnetic properties, Curie temperature, specific heating rate at 295 kHz and hysteresis loss have been studied. The highest coercivity of 50 and 40 Oe, were obtained for NiFe2O4 and Ni0.5Zn0.5Fe2O4 samples with the grain size of 35 and 29 nm, respectively. The coercivity of Ni and Ni-Zn mixed ferrites decreased with temperature. The Bloch exponent was 1.5 for all samples. As the grain size increased, the Curie temperature of NiFe2O4 increased from 849 to 859 K. The highest saturation magnetization of 70 emu/g at 298 K and the highest specific heating rate of 1.6 K/s under radiofrequency heating at 295 kHz were observed over NiFe2O4 calcined at 1073 K. Both the magnitude of the hysteresis loss and the temperature dependence of the loss are influenced by the sintering temperature and composition.

Perceptions of collaboration between general practitioners and community pharmacists: Findings from a qualitative study based in Spain

According to the theory of reasoned action (TRA), collaboration is only possible when it is perceived as useful by the participants involved. This paper describes a qualitative study using semi-structured interviews to explore the preceived usefulness of general practitioner (GPs)-community pharmacists (CPs)' collaboration from these professionals' perspectives based in two Spanish regions. Thirty-seven interviews were conducted with GPs and CPs with and without previous experience of collaborating with the other groups of professionals. Analysis of the data indicated that the GPs and CPs considered that collaboration between practitioners and pharmacists to have different forms of usefulness, ranging from positive to negative perceptions of usefulness. Negative and neutral opinions (collaboration generates conflict and/or is not benefitial) could prevent practitioners from initiating collaboration with the other group of professionals, which is explained by the TRA. These perceptions were only found among those participants without experience in collaboration. When collaboration was perceived as advantageous, it could be beneficial on three levels: health system (i.e. provision of integrated care, increased efficiency of the system), GPs and CPs (i.e. increased job satisfaction and patient loyalty) and patients (i.e. improved patient safety). Although GPs and CPs with experience identified benefits using a range of examples, GPs and CPs who had never collaborated also believed that if collaboration was undertaken there would be benefits for the health system, patients and health professionals. These results should be considered when developing strategies to encourage and improve the implementation of collaborative working relationships between GPs and pharmacists in primary care.

Doing Focus Groups and Interviews with Recent Migrants to Northern Ireland: A Dynamic Interplay of Ethics, Language and Access

This case describes a qualitative social science research project that was conducted in 2009 and that examined the experiences of recent migrants to Northern Ireland. While background to the research and key findings are presented, the topic forms a backdrop to the case. The following aspects of the study are presented: the theoretical context; formulating the research question, design and methodology; key methodological issues; data collection and analysis; project dissemination; and research funding and reporting. The case pays particular attention to the needs and impact of different groups including the researcher, the funding body, the researcher’s employer and the researched. The significance of access, language and ethics to this study are examined. Finally, the way in which the research unfolded in an often-unpredictable way throughout the implementation process is highlighted in the narrative.

Uncovering the challenges of managing cachexia in advanced cancer: Preliminary results from semi-structured interviews with healthcare professionals in a regional cancer centre

Background: Cancer cachexia is a complex metabolic syndrome characterised by severe and progressive weight loss which is predominantly muscle mass. It is a devastating and distressing complication of advanced cancer with profound bio-psycho-social implications for patients and their families. At present there is no curative treatment for cachexiain advanced cancer therefore the most important healthcare response entails the minimisation of the psycho-social distress associated with it. However the literature suggests healthcare professionals’are missing opportunities to intervene and respond to the multi-dimensional needs of this population.

Objective:The objective of this study was to explore healthcare professionals’ response to cachexia in advanced cancer.

Methods: An interpretative qualitative approach was adopted in this study. A purposive sample of doctors, nurses, specialist nurses and dieticians were recruited from a regional cancer centre between November 2009 and November 2010. Data was collection was twofold: two multi-professional focus groups were conducted first to uncover the main themes and issues in cachexia management. This data then informed the interview schedule for the following 25 individual semi-structured interviews.

Results: Preliminary data analysis of the semi-structured interviews revealed distinct differences between disciplines in their perceptions of cancer cachexia which influenced their response to it in clinical practice. The commonality between disciplines, with the exception of palliative care, was a reliance on the biomedical approach to cancer cachexia management.

Discussion and Conclusions: Cancer cachexia is a complex and challenging syndrome which needs to be addressed from a holistic model of care to reflect the multi-dimensional needs of this patient group. The perspectives of those involved in care delivery is required in order to inform the development of interventions aimed at minimising the distress associated with this devastating syndrome.

Novel titania sol-gel derived film for luminescence-based oxygen sensing.

A novel method for the preparation of titania sol–gel derived oxygen sensors based on the ruthenium(II) dye, [Ru(bpy)3]2+, is described. A titania sol–gel paste film was cast onto microscope slides, and the dye ion-paired to the deprotonated, hydroxylated groups on the film's surface from an aqueous solution of the dye at pH 11. The resulting sensor film is extremely oxygen sensitive, with a PO2 (S = 1/2) value (i.e. the partial pressure of oxygen required in order to reduce the original, oxygen free, luminescence intensity by 50%) of 0.011 atm. The sensor undergoes 95% response to oxygen in 4 s, and shows 95% recovery of its luminescence in argon within 7 s.

Implementation of a new atomic basis for the He i equilibrium line ratio technique for electron temperature and density diagnostic in the SOL for H-mode plasmas in DIII-D

Evaluating the ratio of selected helium lines allows for measurement of electron densities and temperatures. This technique is applied for L-mode plasmas at TEXTOR (O. Schmitz et al., Plasma Phys. Control. Fusion 50 (2008) 115004). We report our first efforts to extend it to H-mode plasma diagnostics in DIII-D. This technique depends on the accuracy of the atomic data used in the collisional radiative model (CRM). We present predictions for the electron temperatures and densities by using recently calculated R-Matrix With Pseudostates (RMPS) and Convergent Close-Coupling (CCC) electron-impact excitation and ionization data. We include contributions from higher Rydberg states by means of the projection matrix. These effects become significant for high electron density conditions, which are typical in H-mode. We apply a non-equilibrium model for the time propagation of the ionization balance to predict line emission profiles from experimental H-mode data from DIII-D. © 2010 Elsevier B.V. All rights reserved.

Active corrosion protection of AA2024 by sol-gel coatings with corrosion inhibitors

A indústria aeronáutica utiliza ligas de alumínio de alta resistência para o fabrico dos elementos estruturais dos aviões. As ligas usadas possuem excelentes propriedades mecânicas mas apresentam simultaneamente uma grande tendência para a corrosão. Por esta razão essas ligas necessitam de protecção anticorrosiva eficaz para poderem ser utilizadas com segurança. Até à data, os sistemas anticorrosivos mais eficazes para ligas de alumínio contêm crómio hexavalente na sua composição, sejam pré-tratamentos, camadas de conversão ou pigmentos anticorrosivos. O reconhecimento dos efeitos carcinogénicos do crómio hexavalente levou ao aparecimento de legislação banindo o uso desta forma de crómio pela indústria. Esta decisão trouxe a necessidade de encontrar alternativas ambientalmente inócuas mas igualmente eficazes. O principal objectivo do presente trabalho é o desenvolvimento de prétratamentos anticorrosivos activos para a liga de alumínio 2024, baseados em revestimentos híbridos produzidos pelo método sol-gel. Estes revestimentos deverão possuir boa aderência ao substrato metálico, boas propriedades barreira e capacidade anticorrosiva activa. A protecção activa pode ser alcançada através da incorporação de inibidores anticorrosivos no prétratamento. O objectivo foi atingido através de uma sucessão de etapas. Primeiro investigou-se em detalhe a corrosão localizada (por picada) da liga de alumínio 2024. Os resultados obtidos permitiram uma melhor compreensão da susceptibilidade desta liga a processos de corrosão localizada. Estudaram-se também vários possíveis inibidores de corrosão usando técnicas electroquímicas e microestruturais. Numa segunda etapa desenvolveram-se revestimentos anticorrosivos híbridos orgânico-inorgânico baseados no método sol-gel. Compostos derivados de titania e zirconia foram combinados com siloxanos organofuncionais a fim de obter-se boa aderência entre o revestimento e o substrato metálico assim como boas propriedades barreira. Testes industriais mostraram que estes novos revestimentos são compatíveis com os esquemas de pintura convencionais actualmente em uso. A estabilidade e o prazo de validade das formulações foram optimizados modificando a temperatura de armazenamento e a quantidade de água usada durante a síntese. As formulações sol-gel foram dopadas com os inibidores seleccionados durante a primeira etapa e as propriedades anticorrosivas passivas e activas dos revestimentos obtidos foram estudadas numa terceira etapa do trabalho. Os resultados comprovam a influência dos inibidores nas propriedades anticorrosivas dos revestimentos sol-gel. Em alguns casos a acção activa dos inibidores combinou-se com a protecção passiva dada pelo revestimento mas noutros casos terá ocorrido interacção química entre o inibidor e a matriz de sol-gel, de onde resultou a perda de propriedades protectoras do sistema combinado. Atendendo aos problemas provocados pela adição directa dos inibidores na formulação sol-gel procurou-se, numa quarta etapa, formas alternativas de incorporação. Na primeira, produziu-se uma camada de titania nanoporosa na superfície da liga metálica que serviu de reservatório para os inibidores. O revestimento sol-gel foi aplicado por cima da camada nanoporosa. Os inibidores armazenados nos poros actuam quando o substrato fica exposto ao ambiente agressivo. Numa segunda, os inibidores foram armazenados em nano-reservatórios de sílica ou em nanoargilas (halloysite), os quais foram revestidos por polielectrólitos montados camada a camada. A terceira alternativa consistiu no uso de nano-fios de molibdato de cério amorfo como inibidores anticorrosivos nanoparticulados. Os nano-reservatórios foram incorporados durante a síntese do sol-gel. Qualquer das abordagens permitiu eliminar o efeito negativo do inibidor sobre a estabilidade da matriz do sol-gel. Os revestimentos sol-gel desenvolvidos neste trabalho apresentaram protecção anticorrosiva activa e capacidade de auto-reparação. Os resultados obtidos mostraram o elevado potencial destes revestimentos para a protecção anticorrosiva da liga de alumínio 2024.